Thank you so much for this tutorial man! I've just got my first XenoPixel V3 yesterday and while I love all the ways to customize and the different features, I wanted a way to create a simple setup like the one you just described! My old saber I was always accidentally engaging the menu or other features because I pressed the button for a second too long. This app setup eliminates that!
Literally same mate! Got mine today and it’s all so overwhelming!! Can I set just one colour with the custom setup? So when I turn on, it just goes to that one colour I picked?
@@DankPlankSam Don't quote me on this since it's all still very new to me... But I think it will stay the same until you change it, but also the color will change if you mess with the lighting and sound fonts. So you have to reset the color to what you want if you change the sound/lighting font.
@@jeremyw2465 it’s so in depth isn’t it! I can see why they cost what they do with the tech inside it. Really clever piece of kit. The missus can’t quite understand it but it’s keeping me happy and out of trouble 😂
I felt a little frustrated because I couldn't use the lightsaber properly. You saved me so thanks a lot! I've Copied all your controls and feels so much easier now control the saber. Can you tell me please which control do you have for the drag effect so i can add it too?
hey can you do me a big fav what is the default vol for the accent i changed it by mistake when trying to change the FOC settings then hit accent what sensitivity should it been on
What Xeno 3 now has more stuff!? I didn’t even know it had lightning block or melt. The app looks cooler. I just ordered two new Vire sabers with Xeno 3 so I am excited
Yes, but it also removes all the controls you don't put into the setup. For example, my old saber would bring up the menu if I held the button a fraction of a second too long (which annoyed the crap out of me!). Doing this simple setup removes the possibility of accidentially activating something you didn't mean to.
it is easy. just that i don't know what funktion dose what without en explanation. thanks to this tutorial. otherwise i am complelte lost if i wantet a simpler Profile with no BS effect all over the plce
Got mine today and this has helped a lot as it’s very overwhelming with the stock settings. Quick question though, can I make a custom profile but with one colour that I select? Do I “use” that profile and then go into the other settings on the app to change colour? Also when I close the app, will that custom profile still be loaded onto the saber?
If you create a profile with limited controls (no font change) and you manually select a font it will always restart on that particular font. Now you can customize the blade color and style, it will also memorize it. The custom profile is loaded on the app and transferred to the saber (any saber you want). First version would memorize it after restart. But I noticed some exceptions so I can’t say how this will behave with the updates.
@@thesaberfactory appreciate the reply mate, I’m having issues with the charging at the moment. It says ready after about an hour and will last minutes so I’ve googled what to do and it said to take battery out and leave for a bit then put back in charge so fingers crossed this works. So once it’s charged up properly I’ll have a play with the app and follow your steps 🤙🏻🤙🏻
It’d be best to reach out to support via the chat on the website. Check your adapter power specs and send this info as well as description of the issue. Some SOCs tests can be run once we are sure it’s safe to test
If I hit custom function on app it says need firmware update. Select firmware update on app says requires soldering. Ignore warning and hit continue and says firmware succeed, but when I try custom function it still says needs firmware update. Any insight for possible solution? Should I try update from MicroSd?
To update the firmware click on the firmware version number. The « soldering » warning is when you try to switch pixel/rgb at the bottom. Because the board can accomodate either baselit or pixel emitters. So … that’s weird. If your firmware says 1.3 you’re good. If you never upgraded maybe it had to do a gradual update, check your version
Make sure you have the least network interferences possible and if your saber has a low connectivity rating due to the hilt structure, remove the pommel or make the core visible and keep it next to your phone. It shouldn't disconnect. If you keep on having issues you'll have to do a manual update on the sd card.
@@andygee1138 Argh 😑 I should have explained. It's the same thing as "each time" and "1 time". HOLD BUTTON is timing the control. It won't produce any effect unless you release it at exactly the time you have set. And then you can have different functions using the HOLD BUTTON at different timings. HOLD is not timing, meaning after the defined time it will perform the action even if you're still holding the button. But then it also means it's not cumulative. No other function can be performed based on the same HOLD action.
So I can use this to turn off color change from the saber. Great. Is there a way to copy the default config so I don't need to rebuild the whole thing from scratch?
@@thesaberfactory I meant I want copy the default config and turn off color change. But it looks like if I make a custom config I need to program everything
Humm, j'ai essayé avec l'application et le sabre ne veut pas s'allumer, mais les autres fonction comme le son ou le % de batterie fonctionne. J'ai desinstaller l'application et réinstaller et j'ai le même problème, auriez vous une autre piste de solution ?
La lame ne veut pas s’allumer ou bien la carte ne démarre pas ? (pas pareil). Dans le doute toujours regarder le mode DEFAULT pour comparer et voir ce qui manque et sélectionner le mode default pour revenir au comportement initial.
C'est vraiment le sabre qui ne veut pas s'allumer, là carte est allumer et fonctionne. Quand je remet le mode par defaut tout fonctionne. Peut-être que je serais mieux de vous envoyer un courriel avec plus de détails et support visuel pour que vous puissiez mieux voir le problème ? Merci pour votre réponse rapide! Votre service est incroyable, c'est certain que je recommande avec vous! ;)
Anyone else read the Wuhan issued Ts and Cs from Xeno3 and decide not to install on their phone? They ask for more information than the worst TikTok conditions.
The app stores clearly state what data transpires and for what purpose and there is just anonymized usage data shared, most certainly for bug and usage reports. The app doesn’t ask any data from you, no account creation, no identification, so I don’t see what you’d be afraid of. Any specific information source you can share with us?
@ no problem. It’s not like any other I’ve seen. They shouldn’t need 90 percent of this. So… In order to enable you to connect and manage lightsaber devices safely, we may collect information about your mobile phone, IP address, and lightsaber devices. This information will be used to provide you with Lightsaber device connection, discovery of nearby devices and device management features. The above information is listed in detail as follows: Mobile phone related information: hardware device identification (imsi, imei, meid, device hardware serial number, SIM card identification, OAID, Mac address, Android ID), mobile phone model, system version information, system language, country or region set by the mobile phone, The version number of the application store, the screen size and resolution of the mobile phone, CPU and display device related information. Information collected during device connection: For smart devices connected via Bluetooth, we may collect the Bluetooth Mac address and device ID of the device. You are fully aware that we do not need your consent to collect and use personal information in the following circumstances: 1. Related to the fulfillment of the obligations stipulated by laws and regulations by the personal information controller; 2. Directly related to national security and national defense security; 3. Directly related to public security, public health, or major public interests; 4. Directly related to criminal investigation, prosecution, trial and execution of judgments; 5. For the purpose of safeguarding the life, property and other major legal rights and interests of the personal information subject or other individuals, but it is difficult to obtain the authorization and consent of the individual; 6. The personal information involved is disclosed to the public by the subject of the personal information; 7. It is necessary to sign and perform a contract according to the requirements of the personal information subject; 8. Collecting personal information from legally disclosed information, such as legal news reports, government information disclosure and other channels; 9. Necessary to maintain the safe and stable operation of the products or services provided, such as discovering and handling product or service failures; 10. The personal information controller is a news unit, and it is necessary for it to carry out legal news reports; 11. The personal information controller is an academic research institution, and it is necessary to carry out statistical or academic research for the public interest, and when it provides the results of academic research or description to the outside world, it de-identifies the personal information contained in the results. It links to a Chinese government site.
Thank you so much for this tutorial man! I've just got my first XenoPixel V3 yesterday and while I love all the ways to customize and the different features, I wanted a way to create a simple setup like the one you just described! My old saber I was always accidentally engaging the menu or other features because I pressed the button for a second too long. This app setup eliminates that!
Literally same mate! Got mine today and it’s all so overwhelming!! Can I set just one colour with the custom setup? So when I turn on, it just goes to that one colour I picked?
@@DankPlankSam Don't quote me on this since it's all still very new to me... But I think it will stay the same until you change it, but also the color will change if you mess with the lighting and sound fonts. So you have to reset the color to what you want if you change the sound/lighting font.
@@jeremyw2465 it’s so in depth isn’t it! I can see why they cost what they do with the tech inside it. Really clever piece of kit. The missus can’t quite understand it but it’s keeping me happy and out of trouble 😂
I'm happy enough just using the flashing button my mace Windu light sabre has not that difficult.
Wow nice video thanks a lots! :)
I felt a little frustrated because I couldn't use the lightsaber properly. You saved me so thanks a lot! I've Copied all your controls and feels so much easier now control the saber. Can you tell me please which control do you have for the drag effect so i can add it too?
hey can you do me a big fav what is the default vol for the accent i changed it by mistake when trying to change the FOC settings then hit accent what sensitivity should it been on
What Xeno 3 now has more stuff!? I didn’t even know it had lightning block or melt. The app looks cooler. I just ordered two new Vire sabers with Xeno 3 so I am excited
Xeno3 is aging well. First few months were a bit chaotic with lots of bugs but now it’s getting stable and improved
idk i have the paladin v3 saber from imperial workshop and it doesnt show up in the app at all
This is amazing
gennnnnngar
essentially putting in the controls that are already there
Yes, but it also removes all the controls you don't put into the setup. For example, my old saber would bring up the menu if I held the button a fraction of a second too long (which annoyed the crap out of me!). Doing this simple setup removes the possibility of accidentially activating something you didn't mean to.
the *gesture sensitivity* controls are GONE , so I started watching this in hopes to find where they are .. also *NO 🔋 precentage* kinda suck ..
anyways - I have learned sth new 2nite .. *many thanks* 🙏🏽
I could not get the 2 button press battery voice to sound
Mine doesnt seem to want to detect the saber and color changing manually to red especially is near impossible
Not sure if it's the same but I can't turn my blade yellow... when I do it just becomes white
it is easy. just that i don't know what funktion dose what without en explanation.
thanks to this tutorial. otherwise i am complelte lost if i wantet a simpler Profile with no BS effect all over the plce
How do you turn off? The drag melt on default
Alguien sabe como utilizar todas los menus no me deja ingresar a varios de ellos porfavor
How do you get your font list to show names in the app and not just numbers?
I need help my blade length is stuck at 1
How to program a rain effect?
Got mine today and this has helped a lot as it’s very overwhelming with the stock settings. Quick question though, can I make a custom profile but with one colour that I select? Do I “use” that profile and then go into the other settings on the app to change colour? Also when I close the app, will that custom profile still be loaded onto the saber?
If you create a profile with limited controls (no font change) and you manually select a font it will always restart on that particular font. Now you can customize the blade color and style, it will also memorize it.
The custom profile is loaded on the app and transferred to the saber (any saber you want). First version would memorize it after restart. But I noticed some exceptions so I can’t say how this will behave with the updates.
@@thesaberfactory appreciate the reply mate, I’m having issues with the charging at the moment. It says ready after about an hour and will last minutes so I’ve googled what to do and it said to take battery out and leave for a bit then put back in charge so fingers crossed this works. So once it’s charged up properly I’ll have a play with the app and follow your steps 🤙🏻🤙🏻
It’d be best to reach out to support via the chat on the website. Check your adapter power specs and send this info as well as description of the issue. Some SOCs tests can be run once we are sure it’s safe to test
@@thesaberfactory found your other video on the OFF/ON switch when charging. Replied to your comment on that video and so far so good!
Anyone having issues with it crashing everytime? i have reinstalled several times and no luck
Sadly my lightsaber doesnt make any sound anymore if it is getting charged or powered on after the update.
Factory reset or reinstall a backup. If you’re just missing those two sounds check that the corresponding soundfiles are on the sd card
@@thesaberfactory Alright thanks for the advice. Imma try it later.
question is the Xeon3 really the XeonPixel v3 or are you just saying Xeon3 in short of saying the full name XeonPixel V3
Xenopixel named has changed. The 3rd version is named XENO 3.
What battery level did it say??? 💀💀💀 we are doom 😭
Didn't even notice 😅... the anger "Gives you focus" !!!
If I hit custom function on app it says need firmware update. Select firmware update on app says requires soldering. Ignore warning and hit continue and says firmware succeed, but when I try custom function it still says needs firmware update. Any insight for possible solution? Should I try update from MicroSd?
To update the firmware click on the firmware version number. The « soldering » warning is when you try to switch pixel/rgb at the bottom. Because the board can accomodate either baselit or pixel emitters. So … that’s weird.
If your firmware says 1.3 you’re good. If you never upgraded maybe it had to do a gradual update, check your version
Anyone else's firmware update timing out before complete?
Make sure you have the least network interferences possible and if your saber has a low connectivity rating due to the hilt structure, remove the pommel or make the core visible and keep it next to your phone. It shouldn't disconnect. If you keep on having issues you'll have to do a manual update on the sd card.
@@thesaberfactory Thanks! Got it working! What is the difference between "hold" and "hold button"?🤔
@@andygee1138 Argh 😑 I should have explained. It's the same thing as "each time" and "1 time". HOLD BUTTON is timing the control. It won't produce any effect unless you release it at exactly the time you have set. And then you can have different functions using the HOLD BUTTON at different timings.
HOLD is not timing, meaning after the defined time it will perform the action even if you're still holding the button. But then it also means it's not cumulative. No other function can be performed based on the same HOLD action.
@@thesaberfactory Cool, thanks for that! This is my first saber and I really only want it for costuming as Luke in ROTJ so these settings are perfect!
So I can use this to turn off color change from the saber. Great. Is there a way to copy the default config so I don't need to rebuild the whole thing from scratch?
Don't need to. Default remains untouched and can't be deleted. So you'll never lose it.
@@thesaberfactory I meant I want copy the default config and turn off color change. But it looks like if I make a custom config I need to program everything
Oh ok. Not yet possible but that’s a good feature for a future update. Right now you need to redo it all manually
is the Xeno3 app better than a SVn4 ? i think Xeno3 do more updates?
Yes. There is definitely more development on Nexus’ side with Xeno3. So for now it’s got the upper hand
Humm, j'ai essayé avec l'application et le sabre ne veut pas s'allumer, mais les autres fonction comme le son ou le % de batterie fonctionne. J'ai desinstaller l'application et réinstaller et j'ai le même problème, auriez vous une autre piste de solution ?
La lame ne veut pas s’allumer ou bien la carte ne démarre pas ? (pas pareil). Dans le doute toujours regarder le mode DEFAULT pour comparer et voir ce qui manque et sélectionner le mode default pour revenir au comportement initial.
C'est vraiment le sabre qui ne veut pas s'allumer, là carte est allumer et fonctionne. Quand je remet le mode par defaut tout fonctionne. Peut-être que je serais mieux de vous envoyer un courriel avec plus de détails et support visuel pour que vous puissiez mieux voir le problème ? Merci pour votre réponse rapide! Votre service est incroyable, c'est certain que je recommande avec vous! ;)
@@yacinthelebot6074 si ça remarche en mode défaut c'est très probablement qu'une consigne n'est pas correcte dans le mode que vous avez créé.
Anyone else read the Wuhan issued Ts and Cs from Xeno3 and decide not to install on their phone? They ask for more information than the worst TikTok conditions.
The app stores clearly state what data transpires and for what purpose and there is just anonymized usage data shared, most certainly for bug and usage reports. The app doesn’t ask any data from you, no account creation, no identification, so I don’t see what you’d be afraid of. Any specific information source you can share with us?
@ no problem. It’s not like any other I’ve seen. They shouldn’t need 90 percent of this. So…
In order to enable you to connect and manage lightsaber devices safely, we may collect information about your mobile phone, IP address, and lightsaber devices. This information will be used to provide you with Lightsaber device connection, discovery of nearby devices and device management features. The above information is listed in detail as follows:
Mobile phone related information: hardware device identification (imsi, imei, meid, device hardware serial number, SIM card identification, OAID, Mac address, Android ID), mobile phone model, system version information, system language, country or region set by the mobile phone, The version number of the application store, the screen size and resolution of the mobile phone, CPU and display device related information.
Information collected during device connection: For smart devices connected via Bluetooth, we may collect the Bluetooth Mac address and device ID of the device.
You are fully aware that we do not need your consent to collect and use personal information in the following circumstances:
1. Related to the fulfillment of the obligations stipulated by laws and regulations by the personal information controller;
2. Directly related to national security and national defense security;
3. Directly related to public security, public health, or major public interests;
4. Directly related to criminal investigation, prosecution, trial and execution of judgments;
5. For the purpose of safeguarding the life, property and other major legal rights and interests of the personal information subject or other individuals, but it is difficult to obtain the authorization and consent of the individual;
6. The personal information involved is disclosed to the public by the subject of the personal information;
7. It is necessary to sign and perform a contract according to the requirements of the personal information subject;
8. Collecting personal information from legally disclosed information, such as legal news reports, government information disclosure and other channels;
9. Necessary to maintain the safe and stable operation of the products or services provided, such as discovering and handling product or service failures;
10. The personal information controller is a news unit, and it is necessary for it to carry out legal news reports;
11. The personal information controller is an academic research institution, and it is necessary to carry out statistical or academic research for the public interest, and when it provides the results of academic research or description to the outside world, it de-identifies the personal information contained in the results.
It links to a Chinese government site.
Bro where tf is the blade color change?? For some reason for the normal color cycle it completely skips red…
There’s a whole color wheel…
It's RGB or xenopixel?
You mean "neopixel". Xenopixel is a brand of soundboard. Depends on which hilt you buy, it comes as an RGB baselit or Neopixel.
@@zero604 RGB baselite