The new backdrop wall looks awesome. It's nice to see you giving the GET motors some attention, especially for people that don't want to do the full GY6 swap.
I'm basically doing this exact same project right now except for the new exhaust after my stock engine bracket failed. I'm not very handy so videos like these are a life saver. Thanks, man!
Great job Bobby Its Definitely Paid Off and looks great brother adding some of that studio quality for Sure. KEEP UP THE GREAT WORK AND LOVING THE PARTS FROM THE RUCK SHOP AS ALWAYS YOU GUYS TAKE GOOD CARE OF US AND WE APPRECIATE IT.
this stretch seems like a nice amount for the stock look but I know i'd kick myself for having to buy 2 different stretch kits when I finally get wheels haha
Awesome video! I just got my TRS 9.5'' stretch today. I also have a 2022 Ruckus... Did you have to grind down the pivot bushings on the frame, or just straight up bolt the engine mount as is? I can't wait to install this bad boy!
Just did a quick road test, you ever have the issue of the TRS shock bracket hitting one of the little frame brackets with the threaded 10mm hole for the factory plastic cover?
Hey what’s good brother, big fan of all of your informative vids. If you’re planning on doing a video about installing and tuning gy6 205cc with KOSO afr kit I have sweet ruck for your channel
The link for everything I did is in the description of the video. Also the stretch kit will tell you if you need anything else in its product description as well. Got you covered
I did all these mods to a 2018 ruckus. i cant seem to find a video on how to tune the carb after the velocity upgrade. direction say supposed the air fuel but its capped off. we are getting 9500 RMP but still not getting to the end of the variator 4gram dr pullies in polini? any help would be greatly appriciated
@@burnoutbobby when i bought the bike it had NCY CDI, Big Gun EVO exhaust. polini variator unknown weights, I added the following after watching your video! TVR intake with 38 idle, 78 main and needle shim, NCY Coil, dr pully sliders 4gram, NCY oil decompresssion tube, reed block off, also bought 5gram but havnt used yet. Order #113819
That big gun will lose power. The header is too big and loses back pressure. Your rpm may be up there but if you don’t have back pressure it doesn’t matter because it won’t have what’s needed to keep a solid power band
Personally everyone I know with a 20mm carb carry’s a screwdriver with them to keep running on the fly. I like the oem carb. I’d try a different pipe like two brothers or yoshi.
The ruck shop sells the correct wheel, hub, hubcap for this setup. It comes in solid dish or oldschool design. They are currently on a big wheel sale too
Also what intake did u install. By the way u get down on what u do brea. If u was local u would be making all my money brotha. Wer u located if u don't mind me asking
Авто/Мото
The new backdrop wall looks awesome. It's nice to see you giving the GET motors some attention, especially for people that don't want to do the full GY6 swap.
Yeah always gotta show some get love
I'm basically doing this exact same project right now except for the new exhaust after my stock engine bracket failed. I'm not very handy so videos like these are a life saver. Thanks, man!
Awesome! Good luck!
Great job Bobby Its Definitely Paid Off and looks great brother adding some of that studio quality for Sure. KEEP UP THE GREAT WORK AND LOVING THE PARTS FROM THE RUCK SHOP AS ALWAYS YOU GUYS TAKE GOOD CARE OF US AND WE APPRECIATE IT.
Thank you!
Thanks for the video! Helped me tremendously. Your video gave me the confidence to do it myself.
Awesome! Good job man!
Really been enjoying the new content and that last build✌️
Thank you as always Andy!
this is exactly what I was looking for! Just got my ruckus and can't wait to do the stretch with the stock look.
Glad I could be of assistance!
@@burnoutbobby All of your videos seem to be very helpful with some insight and tips on each upgrade. Thank you!
That was a goal. Thank you
Picking my 2022 Grey up this Friday. Can’t wait to put the stage 2 kit on.
Yes!!!
Ty for this video.
You’re welcome
That looks dope bro. I want one now Lolol. Hey I don’t know if you mix that Metallica with hip hop beat. But it sound good.
That’s JLbeatzz on ig he does my music for me.
this stretch seems like a nice amount for the stock look but I know i'd kick myself for having to buy 2 different stretch kits when I finally get wheels haha
That’s if you don’t want to go fatty. Not everyone wants the fatty look and you can still put a 12x5 on the back with this one.
Awesome video! I just got my TRS 9.5'' stretch today. I also have a 2022 Ruckus... Did you have to grind down the pivot bushings on the frame, or just straight up bolt the engine mount as is? I can't wait to install this bad boy!
Didn’t have to grind anything on this one but it can vary depending on how far Honda pressed your bushings
Awesome! Hopefully I won’t have to grind either lol got me a nice little weekend project
I installed my 9.5” stretch and I didn’t have to grind any of the bushings down! 🙌🏻 lol
Just did a quick road test, you ever have the issue of the TRS shock bracket hitting one of the little frame brackets with the threaded 10mm hole for the factory plastic cover?
@biellzeboss no I didn’t run into that issue. It is on a pivot point a little so I can see that happening.
Hey what’s good brother, big fan of all of your informative vids. If you’re planning on doing a video about installing and tuning gy6 205cc with KOSO afr kit I have sweet ruck for your channel
Do you have those parts already?
@@burnoutbobby Hey what’s good brother.. Parts will be in Fridayish..
Ok keep me posted
@@burnoutbobby Definitely brother..
Hey what’s going brother!. The parts finally arrived today.
Good music
Great video! will this kit require a new brake cable and throttle cable?
Kit comes with brake cable. You just need a 75” cvk cable from the ruck shop
@@burnoutbobby thanks for the reply
That’s what I’m here for. You’re welcome.
Do these parts fit on the 2024 ruckus Ik this video is older but just seeing if I can get an answer
Yeah all rucks will be the same for parts like this. 2003-2024
That looks clean and simple. Do you have the links to the stretch kit? What cables did you have to change? What about the fuel lines?
The link for everything I did is in the description of the video. Also the stretch kit will tell you if you need anything else in its product description as well. Got you covered
Great job. What would you charge to do this on another one/
My rate is 40/hr with working on bikes
Did you use the stock shock or was it aftermarket?
The ncy lowboy. I go over that in the end of the video and middle
I did all these mods to a 2018 ruckus. i cant seem to find a video on how to tune the carb after the velocity upgrade. direction say supposed the air fuel but its capped off. we are getting 9500 RMP but still not getting to the end of the variator 4gram dr pullies in polini? any help would be greatly appriciated
What do you have all done. I need all the info. Even what jets and all.
@@burnoutbobby when i bought the bike it had NCY CDI, Big Gun EVO exhaust. polini variator unknown weights, I added the following after watching your video! TVR intake with 38 idle, 78 main and needle shim, NCY Coil, dr pully sliders 4gram, NCY oil decompresssion tube, reed block off, also bought 5gram but havnt used yet. Order #113819
That big gun will lose power. The header is too big and loses back pressure. Your rpm may be up there but if you don’t have back pressure it doesn’t matter because it won’t have what’s needed to keep a solid power band
@@burnoutbobby whats best option from here? can i replace header or do i go 20mm carb
Personally everyone I know with a 20mm carb carry’s a screwdriver with them to keep running on the fly. I like the oem carb. I’d try a different pipe like two brothers or yoshi.
Do you know if we can put a fatty wheel with just a 9,5 stretch ?
You cannot. The biggest you can go is 12x5 or 10x5.
How is the fitment of the NCY 265mm shock without the stretch kit? Do you still need to preload it all the way?
Won’t fit without the stretch.
@@burnoutbobby Oh really, The regular shock wont fit?
@firebadgergaming903 no the airbox is in the way and can rub the frame
@@burnoutbobbyoh I have no problem ditching the airbox.
Wonder if they ship to Australia... will have to ask
Ship to Australia daily. You just asked the manager of trs lol.
hey can you help me how can i fix my push start on my bike is not starting
Hard to say. Could need a new push start
What wheel size, and tire size would you recommend with this setup? I want a more sporty style
12x5 with a 130/70-12
@@burnoutbobbywhat about an offset and wheel hub?
The ruck shop sells the correct wheel, hub, hubcap for this setup. It comes in solid dish or oldschool design. They are currently on a big wheel sale too
That's cool. Do u know of any shop in southern California that I can take my ruckus to get some work done. Thanks in advance.
I do not. I haven’t been past Texas and only shop in Cali I know of is north Cali I believe
Gracias. I just installed a yoshi but I feel the bike slower any pointers if u can help.
Also what intake did u install. By the way u get down on what u do brea. If u was local u would be making all my money brotha. Wer u located if u don't mind me asking
Did you rejet the carb if not then it’s running lean and bad for the motor.
I’m in Tampa. The intake is the tvr intake.
Will it fit 2024 Honda ruskus
All years for the ruckus as they haven’t changed since 2003
How fast is going
50.2
Is it for sale?
No it was a local drop off
Can you use this 9.5 with factory center stand still
Yeah, I’ve seen people still use the center stand on 9.5.
@@burnoutbobby hey another question can I still get good results using the tvr intake with the stock exhaust
You will be limited. You are allowing more air and fuel in but choking it out with stock exhaust. So it may be minimal performance seen.
@@burnoutbobbyso I just bought a ruckus with the I assume v1 9.5 stretch kit what’s the big difference from v1 and the newer v2
The v2 is more rigid and less movement mount wise