I usually have the crankshaft oiled a bit anyway, and I put it in a cardboard box with newspaper around the crank, and I freeze the whole box so it keeps it cool while I take it outside into the garage.
Omg hahaha, I'm a huge fan of yours! Thank you so much, never in my life thought you were going to come across one of my videos ! You made my day! Thank you
Thanks for watching, I didn't used red Loctite , is orange , the orange loctite is a hybrid between the red and the blue one , supposedly is strong as the red one but is easy to remove the bolts like the blue one , 😉
Thank you for taking the time to create such an informative and well-explained video on building a scooter engine. I appreciate the work and effort you put into making this video. Keep up the great work!
@@rudikurniazain2529 se lo guarda para que se contraiga pues el frío contrae y el calor expande el material para una fácil instalación. saludos desde Ecuador 🇪🇨
i was just wondering, i have a 250cc chinese atv, i don't really know what the engine is, i always suspected it to be a 232cc gy6 but i m not quite sure, i haven't really found anything about a gy6 being over 150 or 200cc with the help of taida. Is it a gy6 or something else? edit:(the engine looks very similar to the one in the video) Also, i m new to your channel, but it looks very high quality, just subbed!
Thank you so much for subscribing and watching my video😀 I think your ATV has a 232cc engine ,usually when a chinese vehicle is marked as a 250cc most of the time those vehicles have a 232cc engine , I found this article that is really going to help you decode your engine I don't know if you are interested in reading it but if you do and you still have questions ,you can always ask me and I'll be happy to help ncystore.com/blog/gy6-a-block-vs-b-block-232cc
Hello sir, What could be causing some popping and bogging at 2/3 - 3/4 throttle on a 150cc GY6 scooter? Can you think of anything electrical that can be.causing this? I've already installed 3 new carburetors, 3 different csi boxes, different coil wires, and a couple other things and I can't seem to get rid of it. Would a bad stator or rectifier be the cause? What about a bad vacuum fuel pump? I just don't know where else to look. Can you help me please? I am really just so frustrated right now. Thanks so much for any advice you could offer.
Muchas gracias por ver mi video ! La mayoría de partes que use para hacer este motor vinieron de Puerto Rico, usualmente ustedes siempre tienen lo mejor para armar estos motores!
Hola , saludos muchas gracias por tu comentario, que pena responder hasta el día de hoy , discúlpame 😅 Solo te quería dejar el link donde instalo este motor y para que veas como quedo !ruclips.net/video/qo95ezELTMs/видео.htmlsi=fajbjCo6n97n8HoQ
@@benscootin4329 also I'm using the 8.2 mm crankshaft that's how the engine became a 205cc instead of 180cc, the piston is 63mm but the cylinder head is 57mm that way I can have a little more compression
Yeah is kind of hard but I found some cylinder heads with 4 valves for about 270 dollars , plus I would had to buy the 4 valve forged piston which that was about 170 , I really didn't want to spend any more money since I have already been spending alot on this project and my wife wasn't very happy about it lol, also I friend of mine has a 232cc gy6 with the 4 valve piston head and he said that the performance of the 4 valve head vs the 2 valve is not that great he says that is really hard to make the scooter run right most of the time because he has to be adjusting the carb depending on the weather , my guess is maybe because all the air that the 4 valve head puts in to the engine makes the engine a little unstable, so he just recommended just to stick with the regular head and that is what I did , I just want to enjoy the scooter once is done , I don't want to be working on it for the rest of my life hahaha Thanks a lot for watching
@@jmrbuilds do you have a Japanese GY6 or a Chinese copy of GY6 ? I have a factory Chinese clone GY6 150cc , the carburetor strongly suffocates the engine, I bought a carburetor specially from the GY6 200cc version, with my 170cc the motor noticeably increased power on this carburetor (in order to qualitatively adjust the carburetor, you need a set of jets, but this does not always help, you need a carburetor housing with an enlarged diffuser, so it's easier to buy the whole)
Hey thanks for watching! The orange liquid is like a type of glue that helps to keep the bolts in place so that way the bolts won't come loose with the vibration of the engine
Hello sir, What could be causing some popping and bogging at 2/3 - 3/4 throttle on a 150cc GY6 scooter? Can you think of anything electrical that can be.causing this? I've already installed 3 new carburetors, 3 different csi boxes, different coil wires, and a couple other things and I can't seem to get rid of it. Would a bad stator or rectifier be the cause? How about a bad vacuum fuel pump? Can you help me please? I am really just so frustrated right now. Thanks so much for any advice you could offer.
Sorry! I haven't work on the scooter in a long time I'm barely getting back , I had some family issues that I needed to take care of, but this engine is for that project that's why I haven't made any follow up , everything is still in the making, I just wanted to thank you for the support and an update will be coming soon!
i'm sorry i have to break this to you but 2 STROKE SUPREMACY i know you're probably commenting on reliability smoke fuel consumption etc. to which id say "that's what makes it funnier than a 4 stroke"
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
I hope I can be hardworking and skilled person like him...it's like a brand new engine... Maximum upgrade is 300cc, with Honda 150r or Yamaha y15 head block...if you use Honday 150r have twin cam... -: reference Honda EX5 with Yamaha LC headblock
To think that back in 2008 through 2011 I had a 180 cc GY6 with parts from Puerto Rico from a RUclips video that had a truck in the background so I called the number on it. Now all these parts are readily available
Beautiful Build ...! 🙏 👍 ( New to your channel ) Is that your Vitacci Engine being rebuilt...? Or is this build ALL-NEW SOURCED PARTS..? If so , Do you have a list for all your sourced parts..?
Thank you so much for watching, this engine has a bunch of parts that I used from my vitacci engine but with a different engine case , the other engine cracked because it felt from a table so I had to build another one lol
Mistakes i see: 1) no need gasket maker if there is a gasket. Do not use gasket maker with 4 stroke moped at all. 2) fridge with crankshaft. Generally idea is good, but he must put it into a plastic bag first to avoid condensate and ice formation. 3) no use of torque wrench ( probably a guy just don't show it)
If you’ve never tried the A11 cam on anything above 190cc, you’d be pleasantly surprised. Just food for thought if you get bored. I like the A11 cam more than the A12 on my 196cc gy6.
Is this a short or long case engine. Trying to upgrade my 2020 Vitacci Rocket. I want change the engine so bad. Can you list where you got your engine and parts. I would love to do an open case build. That is a straight headyurber you have there❤💯💯
Très joli et propre mais les performances sont à voir, sans vouloir faire le chiant le filtre a air choisit fais perdre de la perf et sur le marché il existe des culasse 4 soupapes et a sa aurait était incroyable mais sinon il est très propre respect 🫡
Only the CVT transmission takes up to 30% of the power. To achieve a higher maximum speed, you need to select the weight of the rollers and the stiffness of the spring for a very long time. It is not possible to install a large wheel on the rear.
I need help my pst150-17 ice bear trike kinda hesitates when takin off. But it only does it when riding it about 30 minute and on. When riding fir the first minutes it gets good throttle response but after a while when I come to a stop n go or green to red light n I give it throttle it hesitates , sounds like the wheels get stuck or something and then the bike takes out. Idk It has low mileage on it. Can it be cause I'm a big guy? It's a 150cc
ese motor es originalmenet 150cc al colocarle la lámina, levantas el cilindro pero no aumentas el recorrido del piston asi que por lo tanto aunque sea un 205cc no obtendras mas potencia
Hola ,muchas gracias por ver mi Video , de echo le puse el aumento de aluminio al bloque del motor por que la biela que le instale es más larga que la original , eso hace que el recorrido del piston sea mayor y permite que el pistón llegue hasta el punto más alto del cilindro, también el pistón que instalé tiene un diámetro más grande que el pistón original es por eso que con la biela ahora más grande y el pistón también hace que el motor de ser 150cc pase a ser 205cc
Is this a short or long case engine. Trying to upgrade my 2020 Vitacci Rocket. I want change the engine so bad. Can you list where you got your engine and parts. I would love to do an open case build. That is a straight headturner you have there❤💯💯
Pro tip, if you throw the crank or bearings in the freezer in a big ziplock with a desiccant pack it won’t get all frosty and risk any flash rust
I usually have the crankshaft oiled a bit anyway, and I put it in a cardboard box with newspaper around the crank, and I freeze the whole box so it keeps it cool while I take it outside into the garage.
@@YszapHun with paper you risk it at least a tiny bit tho plastic ziplock is the way tbh
@@redemedy8602 I understand your concern but I've never had problem with paper sticking to the frozen metal.
The engine you installed makes me feel therapeutic
Nice to see our KYMCO engine abroad 😈😈😈😈
Thank you so much!
This is honda engine. Kymco just has a licens.
GY6是HONDA的引擎修改而來 光陽與三陽只是拿到生產許可套上自己的外殼
Very clean built!!!! Beautiful colors!!!!!!!
Thanks 😊
Looks good dude 👌💯
Omg hahaha, I'm a huge fan of yours! Thank you so much, never in my life thought you were going to come across one of my videos ! You made my day! Thank you
@@jmrbuilds saludos desde Colombia
@@germanmorales776 gracias por ver el video, saludos!
Yoo welcome back! And very sick editing brother, cannot wait to see that bad boi running
Hey what's up Nick!!! Thank you so much for watching a really appreciate your support 🙏
I would love to get one of these
Easy with the red Loctite, already feel bad for the next guy that takes this engine apart.
Thanks for watching, I didn't used red Loctite , is orange , the orange loctite is a hybrid between the red and the blue one , supposedly is strong as the red one but is easy to remove the bolts like the blue one , 😉
Thank you for taking the time to create such an informative and well-explained video on building a scooter engine. I appreciate the work and effort you put into making this video. Keep up the great work!
Itu bandulnya kok disimpan di freser biar apa bang..??
@@rudikurniazain2529 se lo guarda para que se contraiga pues el frío contrae y el calor expande el material para una fácil instalación. saludos desde Ecuador 🇪🇨
Was tht sarcastic. I mean awesome build and vjdeo, editing wise. No explanations rho at alll...😅
Hey I watch your videos your have helped me loads mate and don't stop the and here I will show you howwwwwww
How much power can produce?
Good my master 🙏🙏❤️❤️
Wow just wow ! 😊
Thanks alot!
Wow superclean
The way you put sliders says it all 🤣
Both Variomatic screws must be secured with a screw lock such as Loctite!!!
受用了,改天來試試!!😃
👍👏👍👏🌹🌹🌹 إبداع أحسنت
i was just wondering, i have a 250cc chinese atv, i don't really know what the engine is, i always suspected it to be a 232cc gy6 but i m not quite sure, i haven't really found anything about a gy6 being over 150 or 200cc with the help of taida. Is it a gy6 or something else? edit:(the engine looks very similar to the one in the video)
Also, i m new to your channel, but it looks very high quality, just subbed!
Thank you so much for subscribing and watching my video😀
I think your ATV has a 232cc engine ,usually when a chinese vehicle is marked as a 250cc most of the time those vehicles have a 232cc engine , I found this article that is really going to help you decode your engine I don't know if you are interested in reading it but if you do and you still have questions ,you can always ask me and I'll be happy to help
ncystore.com/blog/gy6-a-block-vs-b-block-232cc
JMR Welding Here, my initials
What a coincidence! lol 😅🙂
Waw amazing ❤️🌹
Happy swing r.
Классно❤
Hello sir,
What could be causing some popping and bogging at 2/3 - 3/4 throttle on a 150cc GY6 scooter? Can you think of anything electrical that can be.causing this? I've already installed 3 new carburetors, 3 different csi boxes, different coil wires, and a couple other things and I can't seem to get rid of it. Would a bad stator or rectifier be the cause? What about a bad vacuum fuel pump? I just don't know where else to look. Can you help me please? I am really just so frustrated right now.
Thanks so much for any advice you could offer.
Keren bro 👍👍
Đời bây giờ mà còn dùng bình xăng cơ. Lổi thời quá,
Hello, can it fit my 160 cc 59mm gy block engine?
Whhere can you buy a whole engine like this??
1.1 million views and only 8.3 thousand likes...
If value arm use with bearing(kymco kit),it must be better。
How much would it cost me to buy something like this
Whats the engine specs?
Bore x stroke?
La base du bloc scooter, c’est 50 ou 125cc ???
💯 Now there you GO, Let's get them steaks on now before we ride Out.🏍 🛵 🛵
wow
สวยมาก
Igualito que en PuertoRico.
Muchas gracias por ver mi video ! La mayoría de partes que use para hacer este motor vinieron de Puerto Rico, usualmente ustedes siempre tienen lo mejor para armar estos motores!
Made in Türkiye Mondial 150 Hs Repair
Why is there a CVT component at the engine output?
Because it has a cvt
Dios mio pero que cosa que se ve bonita 😍🛵 yo tengo una suzukian125 🇩🇴quiero poner le algo pero no ahi forma 🙏esta bien linda
Hola , saludos muchas gracias por tu comentario, que pena responder hasta el día de hoy , discúlpame 😅
Solo te quería dejar el link donde instalo este motor y para que veas como quedo !ruclips.net/video/qo95ezELTMs/видео.htmlsi=fajbjCo6n97n8HoQ
👍👍👍
What is the outside diameter of the cylinder sleeve?
thanks for watching ,if I remember right the outer diameter was 65mm !
A 180cc high compression, very cool.
@@benscootin4329 also I'm using the 8.2 mm crankshaft that's how the engine became a 205cc instead of 180cc, the piston is 63mm but the cylinder head is 57mm that way I can have a little more compression
is it impossible to buy a cylinder head with 4 valves ?
Yeah is kind of hard but I found some cylinder heads with 4 valves for about 270 dollars , plus I would had to buy the 4 valve forged piston which that was about 170 , I really didn't want to spend any more money since I have already been spending alot on this project and my wife wasn't very happy about it lol, also I friend of mine has a 232cc gy6 with the 4 valve piston head and he said that the performance of the 4 valve head vs the 2 valve is not that great he says that is really hard to make the scooter run right most of the time because he has to be adjusting the carb depending on the weather , my guess is maybe because all the air that the 4 valve head puts in to the engine makes the engine a little unstable, so he just recommended just to stick with the regular head and that is what I did , I just want to enjoy the scooter once is done , I don't want to be working on it for the rest of my life hahaha
Thanks a lot for watching
@@jmrbuilds
do you have a Japanese GY6 or a Chinese copy of GY6 ?
I have a factory Chinese clone GY6 150cc , the carburetor strongly suffocates the engine, I bought a carburetor specially from the GY6 200cc version, with my 170cc the motor noticeably increased power on this carburetor (in order to qualitatively adjust the carburetor, you need a set of jets, but this does not always help, you need a carburetor housing with an enlarged diffuser, so it's easier to buy the whole)
Que calibración lleva los tornillos de rosca 6mm con el torque.
Is this air-cooled engine? If so how long can it perform without melting down?
Nah it's liquid cooled , it's just got a very obviously air cooled cylinder for fun... What a retarded question
150cc scooter motosikletim var 200cc çıkarmak istiyorum hangi parçalar değiştirmem gerekiyor
Nice build. What size chain and cylinder studs did you use?
ruclips.net/video/bIDUvOd5oZU/видео.html
the orange color is grease?
Hey thanks for watching! The orange liquid is like a type of glue that helps to keep the bolts in place so that way the bolts won't come loose with the vibration of the engine
@@jmrbuilds
ok thanks~
I have one shop in Taiwan
the gy6 engine that I had rebuild several times ten yers ago.
Whats the overall price for that build?
500$-700$
I'm going to make a video of how much was everything, because I need to add up all the receipts but for sure I know it was more than 1,000 dollars
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍
Hello sir,
What could be causing some popping and bogging at 2/3 - 3/4 throttle on a 150cc GY6 scooter? Can you think of anything electrical that can be.causing this? I've already installed 3 new carburetors, 3 different csi boxes, different coil wires, and a couple other things and I can't seem to get rid of it. Would a bad stator or rectifier be the cause? How about a bad vacuum fuel pump? Can you help me please? I am really just so frustrated right now.
Thanks so much for any advice you could offer.
Oh no don't use a12 u need a14, a16
What about the liquid cooled setup... Ya never made the follow up about the exhaust dude
Sorry! I haven't work on the scooter in a long time I'm barely getting back , I had some family issues that I needed to take care of, but this engine is for that project that's why I haven't made any follow up , everything is still in the making, I just wanted to thank you for the support and an update will be coming soon!
Nice work like artwork,but the same displacement, Sym's Ham engine and four-valve cylinder head of H7A, faster than GY6.
why frost crank
Is your case and parts powdercoated black or is that paint?
Is powder coating!
Ini...mesin..tangguh..dan...teruji...kekurangannya.....memakai....velg...kecil....harus....disempurnakan...menggunakan..velg..15...seperti...Kymco..ak..550...???...Kymco..🙏🙏🙏👍👍👍..
Nhìn tương tự giống xe tay ga mio 125i
Se ve genial me imagino en funciónamiento saludo desde rd 🇩🇴
Muchas gracias amigo por ver mi video! Saludos desde USA
i'm sorry i have to break this to you but 2 STROKE SUPREMACY
i know you're probably commenting on reliability smoke fuel consumption etc. to which id say "that's what makes it funnier than a 4 stroke"
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
Привет из Белоруси Минска от Ютуб канала Скутерист Дальнобой поддержите за видео весьма полезно
Painted case and block? How the heat desepate?
Im installing an oil cooler
What exactly is your website because I would absolutely love to buy something from your website for my Yamaha Zuma
I hope I can be hardworking and skilled person like him...it's like a brand new engine... Maximum upgrade is 300cc, with Honda 150r or Yamaha y15 head block...if you use Honday 150r have twin cam...
-: reference Honda EX5 with Yamaha LC headblock
Thank your so much for the support ❤️ 🙏
Stopper Tightening the crankshaft nut using a screwdriver.nice nice 👍🏾👍🏾👍🏾
I know I shouldn't have use the screw driver but that was the only thing I had at the moment lol
Thanks for watching
@@jmrbuildstighten the camshaft bolts crosswise next time
This man loves gasket maker haha. You don't need to use RTV with gaskets. Only very light where there are case splits. Cool build though
Your right you don't "need" to, but it makes the gaskets stay put while your aligning cases or what ever your fitting up.
@Kevin Stearns man instead of gasket just use grease its great to use than gasket
To think that back in 2008 through 2011 I had a 180 cc GY6 with parts from Puerto Rico from a RUclips video that had a truck in the background so I called the number on it. Now all these parts are readily available
Always an expert in the comments that knows how to do it the “right” way
Salut❤❤❤
Not interresting as it is. Special parts list ? Modifications ? Machining ? Piston clearence ? Ajustements ?
1st timing chain tention at 90 degrees after TDC, 2nd Valve clearence.
de 0 a 10 minha nota é 0 regra do jogo fazer uma montagem dessa é obrigatorio ligar pra gente ver o ronco do motor.
Open CVT like that wouldn't last long in the UK! the crap that would get in.
Beautiful Build ...! 🙏 👍
( New to your channel )
Is that your Vitacci Engine being rebuilt...?
Or is this build ALL-NEW SOURCED PARTS..?
If so ,
Do you have a list for all your sourced parts..?
Thank you so much for watching, this engine has a bunch of parts that I used from my vitacci engine but with a different engine case , the other engine cracked because it felt from a table so I had to build another one lol
@@jmrbuilds
🙏 👌 👍
Cool
Mistakes i see: 1) no need gasket maker if there is a gasket. Do not use gasket maker with 4 stroke moped at all. 2) fridge with crankshaft. Generally idea is good, but he must put it into a plastic bag first to avoid condensate and ice formation. 3) no use of torque wrench ( probably a guy just don't show it)
Where can I get a motor exactly like it and can it be shipped to Jordan?❤
I know this is a year old but I am looking for that nibbi angled carb adaptor
If you’ve never tried the A11 cam on anything above 190cc, you’d be pleasantly surprised. Just food for thought if you get bored. I like the A11 cam more than the A12 on my 196cc gy6.
If this is a junk Chinese motor I just wasted my like watching this
Собрано из говна. При установке масляного насоса поплыли болты. Все остальное тоже из пластилина?
Нормально собран. Вот только двигатель сам по себе говно полное, и откуда там 200сс не понятно.
Davis George Thompson Kimberly Davis Michael
Hello, Can I contact you I have a few questions?.
Nice build, what kinda carb is that? Looks like a 2stroke carb.
It's a Nibbi 28mm flat side carburetor
Is this a short or long case engine. Trying to upgrade my 2020 Vitacci Rocket. I want change the engine so bad. Can you list where you got your engine and parts. I would love to do an open case build. That is a straight headyurber you have there❤💯💯
А смысл увеличивать кубатуру, без 4-х клапаной головки?
А ролик заснять?
А смысл он эту хуйню делает если двигло отрыгнет меньше чем 1000 км. Ресурса почти нету
Man I need some knowledge, will this exact engine fit my 2016 Honda pcx 150, what can I do to upgrade the boring stock engine? I need advice
oh I have a sick trike frame that would work beautifully in - that is a sharp engine can't wait to see it burbling!
Thanks a lot for watching, I really appreciate your support !
Très joli et propre mais les performances sont à voir, sans vouloir faire le chiant le filtre a air choisit fais perdre de la perf et sur le marché il existe des culasse 4 soupapes et a sa aurait était incroyable mais sinon il est très propre respect 🫡
Mesin nya seperti baru👍
Can you fix my GY6 engine. I Don't have a money to fix if 😔 please i see your all video it's nice and good video. Please fix my GY6 engine 😔
Only the CVT transmission takes up to 30% of the power. To achieve a higher maximum speed, you need to select the weight of the rollers and the stiffness of the spring for a very long time. It is not possible to install a large wheel on the rear.
Queria escuchar ese motor encendido por eso doy dislike
Apakah ini semua bentuk cicilan atau uang cash???
How much will it cost me to get a engine like that please let me know
is this nibbi carborator , can use it on aprilia sr150cc??
I need help my pst150-17 ice bear trike kinda hesitates when takin off. But it only does it when riding it about 30 minute and on. When riding fir the first minutes it gets good throttle response but after a while when I come to a stop n go or green to red light n I give it throttle it hesitates , sounds like the wheels get stuck or something and then the bike takes out. Idk It has low mileage on it. Can it be cause I'm a big guy? It's a 150cc
I'm pretty sure your pulley beads are loaded backwards,If you follow dr.pulley's product installation instructions, unless it is a counterfeit.
ese motor es originalmenet 150cc al colocarle la lámina, levantas el cilindro pero no aumentas el recorrido del piston asi que por lo tanto aunque sea un 205cc no obtendras mas potencia
Hola ,muchas gracias por ver mi Video , de echo le puse el aumento de aluminio al bloque del motor por que la biela que le instale es más larga que la original , eso hace que el recorrido del piston sea mayor y permite que el pistón llegue hasta el punto más alto del cilindro, también el pistón que instalé tiene un diámetro más grande que el pistón original es por eso que con la biela ahora más grande y el pistón también hace que el motor de ser 150cc pase a ser 205cc
Tienes video de ella coriendo y las piesas o el kit donde lo conseguites
G bisa bhasa Inggris :(
If this engine leaking, it's mean the steel are weak, the amount of rtv put at the gasket literally made it into glue... Haha... Nice build though
😁I want that engine on my Wolf 150 scooter. Brilliant job guys.
Thanks a lot for watching!
Is this a short or long case engine. Trying to upgrade my 2020 Vitacci Rocket. I want change the engine so bad. Can you list where you got your engine and parts. I would love to do an open case build. That is a straight headturner you have there❤💯💯
Omg Plees rebuild me gy6