I have accord 08 v6 serpentine belt fell off while driving . Would still start with jump . Towed it home reinstalled serpentine belt now cranks but won’t start and shows ecu pcu relation failure . I think it’s a bad ground but would that cause crank no start ?
I have the same problem in my H Accord 2008 but my question is what's the fix? I already replace the computer for a used one reprogrammeed the Inmo and rewrite the Vin# and still the same code P060A..
What’s the update. Did the codes come back? My Acura TSX has the same codes. Dashboard lit up like Christmas lights. I changed to a new battery, cleaned the terminals and now no codes are present.
@@BestCarFixes ok thanks, il replace the sensor on my car. Hopefully the lights don’t come back. Interesting that it caused the VSA light to come on as well and that automatic transmission failure
I am having same error codes on honda fit ge6.Sometimes it doesnt start and when it starts it doesnt rev.All of a sudden the car revs and operates normal
I have the same problem honda odyssey 2004, p060a that's the fault, but just happen when I drive long ways, cars getting limp mode looks like got stuck on 3rd gear
This car give me a lot of trouble i change the alternator/ Flush the transmision /change the Engine Computer/4 Coils/ relays, Finally it was. The crank shaft sensor Try to chage the crank shaft sensor
My car now also have same codes, and now my car keep on engine shut off while driving and have to pull off key completely before can start again.. few times engine can start but after driving engine will shut off again while driving.. when diagnose P060A and P1659 faulty.. is it possible same problem? Crank shaft sensor problem?
المشكله عندي بعض الاحيان تتاخر السياره في التشغيل تجلس على ذا الحال يومين ٣ايام تتاخر في التشغيل وفجأه تضبط اسبوع او اسبوعينالسياره هوندا اكورد ٢٠١٢ علما انه وقت تتاخر في التشغيل تشتغل لمبة المكينه ومانع الانزلاق واحيانا لمبة الايرباق غيرت اشياء كثير منها طرمبة بنزين وصفايه وبلف الراجع وسلف ونظفت البوابه وغيرت بواجي مع كويلات وسلف وكمبيوتر وظفيرة كامله مع علبة الفيوز الخارجيه ونفس المشكله ماراحت هل مرت عليك او شي الله يسعدك
Very good sir you’re great
I have accord 08 v6 serpentine belt fell off while driving . Would still start with jump . Towed it home reinstalled serpentine belt now cranks but won’t start and shows ecu pcu relation failure . I think it’s a bad ground but would that cause crank no start ?
I have the same problem in my H Accord 2008 but my question is what's the fix? I already replace the computer for a used one reprogrammeed the Inmo and rewrite the Vin# and still the same code P060A..
This video is great, please do video on this code P0606
What’s the update. Did the codes come back? My Acura TSX has the same codes. Dashboard lit up like Christmas lights. I changed to a new battery, cleaned the terminals and now no codes are present.
this one was the crank shaft sensor is bad
@@BestCarFixes ok thanks, il replace the sensor on my car. Hopefully the lights don’t come back. Interesting that it caused the VSA light to come on as well and that automatic transmission failure
You did not answer anything. You have to reprogram the ECU or replace it or replace the spark plugs
I am having same error codes on honda fit ge6.Sometimes it doesnt start and when it starts it doesnt rev.All of a sudden the car revs and operates normal
Any update?
I have the same problem honda odyssey 2004, p060a that's the fault, but just happen when I drive long ways, cars getting limp mode looks like got stuck on 3rd gear
This car give me a lot of trouble i change the alternator/ Flush the transmision /change the Engine Computer/4 Coils/ relays, Finally it was. The crank shaft sensor Try to chage the crank shaft sensor
Thanks mate! I appreciate it👊
السلام عليكم باشمهندس عندي نفس العطل طلع معاك شنو الله يديك العافيه
كرانك شافت سنسر
اشتغلت معاك اخي ولا ما في
My car now also have same codes, and now my car keep on engine shut off while driving and have to pull off key completely before can start again.. few times engine can start but after driving engine will shut off again while driving.. when diagnose P060A and P1659 faulty.. is it possible same problem? Crank shaft sensor problem?
check the crankshaft sensor
Thanks, will get i check ASAP.
Did you ever fix your problem with your car please message me
Is it fixed ?
@@goingballsgaming23 is it fixed brother
What is the purpose of this video?
سلام عليكم
يا غالي . يطلع لي لمبه ارباق
عندي عندي نفس الموديل يطلع لي هذه الكود
83-13
ECM/PCM relation failure
ماهو المشكله رجاء ساعدني ؟
حليت المشكله اخي
@@hardrockreviews8537 لا
Deleting the code is not the solution cause the code will come back...
السلام عليكم ورحمة الله وبركاته
اخي محمد ممكن وسيلة اتصال احتاجك انا اخوك يوسف من السعوديه
عندي نفس المشكل غيرة حساس كرنك كويلات بواجي بخاخات وسيتم تشغيل وشيك علي الظفيره ونفس المشكل تشتغل وطتفي وتولع لمبة المفتاح
لقيت حل ؟
المشكله عندي بعض الاحيان تتاخر السياره في التشغيل تجلس على ذا الحال يومين ٣ايام تتاخر في التشغيل وفجأه تضبط اسبوع او اسبوعينالسياره هوندا اكورد ٢٠١٢
علما انه وقت تتاخر في التشغيل تشتغل لمبة المكينه ومانع الانزلاق واحيانا لمبة الايرباق
غيرت اشياء كثير منها طرمبة بنزين وصفايه وبلف الراجع وسلف ونظفت البوابه وغيرت بواجي مع كويلات وسلف وكمبيوتر وظفيرة كامله مع علبة الفيوز الخارجيه ونفس المشكله ماراحت هل مرت عليك او شي الله يسعدك