PRO LEVEL PPF 🔥 2002 Chevy Corvette Bumper 📢 Bulking Paint Protection Film Installation
HTML-код
- Опубликовано: 9 фев 2025
- Prepare yourself for an enlightening journey into the world of installing bulk paint protection film (PPF) on the formidable front bumper of a 2002 Chevy Corvette. This venerable 2002 Chevrolet Corvette, known for its unique challenges, demands nothing less than your utmost dedication and expertise.
Our endeavor commences with a significant stretch - a pivotal moment that sets the tone for the entire installation. From this point onward, we will meticulously dissect each step of the process, leaving no stone unturned. While it may be a rarity to encounter a 2002 Corvette in need of PPF these days, the wealth of knowledge and expertise that can be gleaned from this installation remains invaluable.
As you watch this meticulous process unfold and listen to my comprehensive narration, you'll gain a profound understanding of the techniques essential for your future installations. Whether you're embarking on your next PPF project or just beginning your journey into the realm of paint protection film installation, the insights shared here will undoubtedly fortify your skills and expertise.
💬 Let us know what you think of this video in the comment section below.
✨ And don’t forget to subscribe to the Channel!
www.youtube.co...
*******************
🔥 Welcome to the official RUclips channel of Encore Window Tinting and Paint Protection Film! 🔥
If you're passionate about cars and keen to dive deep into the intricacies of Paint Protection Film (PPF), you've found the perfect spot. From the heart of Stockton, California, we're thrilled to have you explore our digital space filled with a rich array of educational content about PPF.
➡️ From the basic steps to the more nuanced techniques, we've captured it all for you. As you scroll through, you'll not only discover the expertise of our shop but also get a glimpse of some stunning cars - a treat we believe every car enthusiast would relish.
Our story starts with Brent, the brain and heart behind our channel. Starting his journey back in 1998, Brent took a window tinting class and went on to explore the automotive tinting world. His passion didn’t stop there. In 2004, he took a leap into the realm of Paint Protection Films by teaching himself the art using a roll of 3M "Clear Bra" film. Today, he stands proud as the owner of ENCORE Window Tinting and Paint Protection Film. Through our videos, he will share the wealth of knowledge he’s garnered over the years.
➡️ Every video here is more than just a tutorial; it's an open invitation for dialogue. We're eager to learn from you, and we hope our content sparks the same enthusiasm in you. We believe in the power of a community where each member contributes, learns, and grows.
🎬 So, buckle up and journey with us through the world of Paint Protection Films! Don’t forget to hit the subscribe button and ring that bell for timely updates! 🔔
********************
📲 Let’s Connect! Follow Encore Window Tinting and Paint Protection Film on social media:
Facebook ➡️ / encorewindowtinting
Instagram ➡️ / encorewindowtinting
✅ Visit our website: encorewindowti...
📧 Contact us anytime: Info@encorewindowtinting.com
📞 Phone: (209) 762-3495
📍 Address: 1155 E. Bianchi rd. Stockton, California
********************
#EncoreWindowTinting #PaintProtectionFilm #PPFInstallation #ppf #chevrolet #corvette #chevroletcorvette #carprotection #carprotectionfilm
Watched this one again to prepare for this weekend. I need to work on my spit an stick technique ! 🤣
🤣😂 are you going to tack in the middle around the vent or tack around one headlight and stretch over to the other headlight? Both are good options. When you tack in the middle, you can get distortions around the vent when you stretch away from it. It's a lot of stretching.
What color is the corvette?
Great Work sir ❤
Thank you! Older Corvettes are always a fun time. 😁🤣 It's very doable but tough. 👍🏻
The video is perfect 👌 No need to add music. Let the silence be 👍
Thank you for the feedback. I appreciate it! 👍🏻😁 Silence it is.
Got one thursday to do! Thank you sir
No problem. Have fun! There is tons of stretch needed on these old corvettes. They definitely keep you on your toes. 😁
Same scenario. Old ppf pulled a bunch of paint and clear coat. So i got a pass today
Thank you so much from Turkie i love my job and learning from you many details🛠️⚔️
Welcome to the channel. Thank you for taking the time to leave me some feedback! I've glad the video is helpful.
Thank you for your sharing 🙏
My pleasure. Thank you for watching and leaving a comment! :)
I normally start with the logo and vent as it's one of my alignment points. Before stretching out, I squeegee in another few inches, which is something else you showed me. I will start with the headlight this time and see how it goes.
It's black !!! Great.
Either way, it gets the job done! Sometimes, it's best to stick with what you know. 😁👍🏻
Damn I could’ve used this video last week when I was struggling on a 1993 vette front and rear bumper lol
These old corvettes are quite a challenge! I don't think I've ever installed PPF on the rear bumper. I bet is was a fun one... 😬😂
@@EncorePPFtint extra slip and tons of stretch!
this is the video i should've seen before struggling with that X6M rear bumper 😊. I'm still watching your videos 😉. If you want a cute little camera that is light, good an dependable try insta go 2/3
I'm glad that you are still finding the videos helpful. That X6M looks like a heck of a bumper! I'd love to get one of those in my shop. If I remember correctly you were bulking that bumper. YIKES! Did you get it done? I wonder what the kit looks like. I'll take a look at that camera. Thanks for the tip!
Awesome video, would you mind making a video on how to hand cut and do seams for full coverage
On this same car? I'm not sure that I will ever be seeing another one of these in the shop. I have a full rear bumper on tesla that I bulked in Matte PPF (link below). I think I'm Bulking another Tesla bumper this week. I'll be recording that one. Challenging bumper in those recesses under the fog lights. :) I also need to redo the front bumper (bulk) on my wife's Toyota Sienna. She had a little fender bender a while back.
ruclips.net/video/38nZMcdS3rM/видео.html
THere is knob on each headlight that you turn to open the headlight panel.
Interesting. It would have helped to have those open while I was trimming the PPF on the bumper. I'll have to look at that next time I do one of these. Thank you for the info!!👍
Could you please make a video with full W463 G-wagon 2001-2017 wrap?
Tough vehicle in a lot of areas. I've recorded one full front end. What parts are you looking for? I'm pretty sure I only posted the video of the hood.
I saw you video of the hood, it's great. I'm looking for doors wrap and wing arch wrap@@EncorePPFtint
Why wouldn’t you pop out the parking/running lights?
I'm not sure how much that would have helped on this vehicle. 🤔 Have you pulled those lights out before? As it was, I was able to wrap all the way to the lights with no problems. 👍🏻