Watch Next 😎👇 🌈 Kiss Cut Stickers With The Cricut Explore 3 ruclips.net/video/iqO8-qtKM_k/видео.html ✨ Die Cut Stickers With The Cricut Explore 3 ruclips.net/video/39V1zEh9_GY/видео.html 💧 How to Print and Cut Waterproof Stickers ruclips.net/video/qD1jobipU-M/видео.html
I really appreciate your video but as a really new Cricut user it was a little confusing. You went through your process so quickly and noticed that you didn't show both steps fully. You did 2 separate runs correct? With cutting die cuts and setting your material and tools to "Cardstock" and running it through the Cricut, it will cut the stickers all the way through making them individual stickers? Then for the second run you set the materials and tools on "sticky" so it does a gentle cut or kiss cut leaving all the stickers on one sheet? Thanks for your help!
What a helpful video. When you made the stickers did you already have the white boarder and then added the bleed? Or was the bleed only used for the kiss cut? Also for the die cuts you only used card stock and then the kid cut sticky note only? I’ve been struggling with an even white board and getting proper cuts.
This was so helpful! I'm new to Cricut and my sticker making, and I've been doing die-cut without knowing you can even do a kiss-cut! Question for you, what sticker paper is this? Mine is a matte finish-- and I'd prefer what you've got!
You totally confused me, but I love it! Crystal, your videos are always so informative and useful. Now you're on design bundles channel, I get the best of both worlds! Love Design Bundles 🤗
How do you get it to cut all the way through the paper. I’ve tried a ton of settings even did custom 350 2x and more pressure and it won’t cut all the way through
Can you do a kiss cut & a die cut on the same sheet with the cricut? I find the stickers hard to separate sometimes & I have seen this done on silhouette. thanks for this video. It made it super easy to do.
I was wondering the same thing. Mostly because you could use the die feature to cut out the sticker sheet on the silhouette. I’m currently trying to figure out if it’s possible to send a sheet back through on the Cricut and do the same
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
This still didn’t work for me on my sticker sheets - which aren’t Cricut sticker sheets but the Q-Connect multi-purpose label sheets that I have. They still cut all the way through so I have to painstakingly peel off every sticker from the mat 😫. I have a Cricut Maker 3 so do you have any tips on how I can tweak the cut? Many thanks xXx
Hi thank for your great video. The stickers look super! However, my Cricut Maker 3 doesn't seem to do very well with kiss cut. I tried sticky note and washi tape and none of them work. I can HARDLY peel the stickers off. Is there another setting I should look at? I's a pity to waste any more paper. Please advise. Thank you.
@@DesignBundles I have done it but it made a very slight difference. Could be something to do with a type of the blade? I’m using a fine point blade, which was already fitted in the machine.
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
Yay I love it. I was hesitant to buy the stickers cause i wasn't sure if it would work, glad I found this vidoe, thank you for sharing. I love it. Trying to get my sticker and notebook shop up and running :)
Hi thank you for this informative video, I just want to ask which type of blade did you use for the stickers? And also if I want to cut a dripping design on a foam craft which blade would be best to use?
Please help Me. I’m trying to make kiss cut stickers but when I take them off the Matt they’re coming out as dye cut stickers. I set the settings to sticky note but it’s still cutting too deep. What am I doing wrong?
Hi Gloria! You can use this laminate: www.143vinyl.com/styletech-mist-laminate-12-x-24-sheet.html to cover the stickers BEFORE you cut them with the machine! This way, it will provide a waterproof layer while adding a touch of fun color! They also offer clear laminate as well! - Dawn
Is there not some way to make it die cut the sheet and kiss cut the stickers? Got a Cricut bc I can't use trimmers properly. Seems like a simple task but having trouble figuring it out, it doesn't seem to let you change it as a second function like with the pen, and refeeding it never seems to line up right, often destroys product. Thanks, anyone who can offer help. Great video tho, was still helpful 👍
Wait, may have found it, seems a workaround is layering multiple copies of the deeper cut lines so it's still just a basic cut but extra cut where needed. 👍🤟
My stickers are always sticky on the back of them from the cricut mat so if I stack them the sticky residue that's left over from the cutting mat gets onto the printed side of the sticker it's stacked on top of. Do you have any tips on how to get rid of that sticky residue? I am using the light mat.
Thank you for taking the time to post. Do you have any suggestions for which kind of sticker paper to use that doesn't smudge? My printer is good, but the black smudges for some reason, all other colors just fine.
I tried doing the cut out stickers yesterday but with 3d holographic sticker paper. I couldn't get it to cut until this morning then when it did it was all off, any tips?
I threw out my old blade and replaced and the same thing. I even went in and lowered the pressure to the lowest, 70. Tried sticky, washi, so many options and it always cuts through. I think I wish I had kept my old dull blade just for kiss cuts!
This is helping a ton, thank you! Is there any way to fill out the whole page with stickers? It feels a shame to waste the paper you cut off for the sticker sheet. 😰
I have a maker and I am trying to cut my stickers on a sheet. I used Sticky note with less pressure and it still cut all the way through. What am I doing wrong?
Crystal please help me. I have been talking back and forth with Design Bundles support staff all week. They have tried very hard, but I still can't print my stickers. I'm using a PC and an Epson 2800 printer. I needed the stickers by 10/21. Any thoughts?
How would I design so that the cricut cuts all the way through around all the stickers for a back sheet as well as cut kiss cut for the stickers individually? tia :)
@@Mariatrieseverything I have the same issue and this does not work, because it will kiss cut the sheet just like the stickers, instead of cutting out the sheet too
I have watched so many videos on sticker making and for the kiss cut stickers they are saying you have to make 3-4 copies of the background paper is this only if you add the offset you make the extra copies of the background paper so many times im a little confused
Hi Tawana! You wouldn't have to make extra copies. Once you flatten the offset and the original image, it will form 1 layer. If you have any additional questions, let us know at mail@designbundles.net We are here to help!
My sticker paper keeps getting jammed in my printer! Ugh... I tried taping a piece of regular printer paper to the back, and I'm only printing one sheet but it still won't work. I have an HP OfficeJet 4650 All in One printer. Can anyone help?
Ive done the same steps but for some reason my cricut is cutting too far along the edges and cuts very crooked. Sometimes it cuts the background sheet too. Any helpful tips for that?
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I have seen a couple of videos of people doing this but with sublimation, i was wondering if you have ever tried it out or would be willing to make a video on it. Ps. I just found your videos and they are so helpful
Do you know what I am doing wrong where it’s cutting the entire details of the stickers out? Such as your wording on the pumpkin spice it would be cutting each letter? I made a logo in Canva and was trying to print stickers from it
This happened to me too, then I discovered the "flatten" button and it turned an image I had into the print & cut function needed to only cut out the border of the sticker. Hope that helps!
@@hiramclarkefilms6407 yes i kept seeing that and the matte tape didn’t work for me either 😭 what ended up working was masking tape and outlining the lines in sharpie on top of the tape. So much extra work 🥴
Sticker paper varies greatly in thickness so definitely play around with the settings. You could try the Paper setting. Or do Sticky Note and change it to less pressure. Hopefully one of those will work for you :)
Did you use the Sticky setting? You could also try Paper to see if that works better. You may need to play around with the settings as all sticker papers will be different thicknesses.
Watch Next 😎👇
🌈 Kiss Cut Stickers With The Cricut Explore 3
ruclips.net/video/iqO8-qtKM_k/видео.html
✨ Die Cut Stickers With The Cricut Explore 3
ruclips.net/video/39V1zEh9_GY/видео.html
💧 How to Print and Cut Waterproof Stickers
ruclips.net/video/qD1jobipU-M/видео.html
So only certain files? If I design my own sticker do I have to add a border for kiss cut?
Did you flatten images first
I have looked through so many videos on how to make kiss cut stickers on the cricut and this is by far the most simple tutorial. Thank you!
agreed.
Thanks for making it simple and getting to the point!
Best and quickest video to learn BOTH ways to do these stickers. Thank you!
You're welcome! Thank you for watching! 😊
YOU ARE MY HERO!!! By far the easiest tutorial for die cut and kiss cut stickers. THANK YOU!
Ginger!! Thank you for your kind words!- Dawn
I really appreciate your video but as a really new Cricut user it was a little confusing. You went through your process so quickly and noticed that you didn't show both steps fully. You did 2 separate runs correct? With cutting die cuts and setting your material and tools to "Cardstock" and running it through the Cricut, it will cut the stickers all the way through making them individual stickers? Then for the second run you set the materials and tools on "sticky" so it does a gentle cut or kiss cut leaving all the stickers on one sheet? Thanks for your help!
Thanks for sharing. This was very resourceful and straight to the point.
What a helpful video. When you made the stickers did you already have the white boarder and then added the bleed? Or was the bleed only used for the kiss cut? Also for the die cuts you only used card stock and then the kid cut sticky note only? I’ve been struggling with an even white board and getting proper cuts.
The white boarder was already there, it is an offset on the stickers, you can likely create an offset on your PNG in your desired design program.
This was so helpful! I'm new to Cricut and my sticker making, and I've been doing die-cut without knowing you can even do a kiss-cut! Question for you, what sticker paper is this? Mine is a matte finish-- and I'd prefer what you've got!
She has the description in the link, you just have to click on "more". I wondered the same thing
Thank you! These instruction are exactly what I was looking for.
Glad it was helpful!
You totally confused me, but I love it! Crystal, your videos are always so informative and useful. Now you're on design bundles channel, I get the best of both worlds! Love Design Bundles 🤗
Awwww thank you :) Sorry for the confusion
So cute! What did you select in Design Space to make them die-cut? Are the steps the same or is there something you do different?
Try medium Card stock
Best tutorial ever!!!
How do you get it to cut all the way through the paper. I’ve tried a ton of settings even did custom 350 2x and more pressure and it won’t cut all the way through
Can you do a kiss cut & a die cut on the same sheet with the cricut? I find the stickers hard to separate sometimes & I have seen this done on silhouette. thanks for this video. It made it super easy to do.
I was wondering the same thing. Mostly because you could use the die feature to cut out the sticker sheet on the silhouette. I’m currently trying to figure out if it’s possible to send a sheet back through on the Cricut and do the same
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
yeah im confused. what were the settings for the die cut versus the kiss cut????
Die-cut: Cardstock setting
Kiss-cut: Sticky Note setting
i have the cricut maker and used the sticky note option to leave the sisters on the paper. but it cut all the way thru. what am i doing wrong?
What settings can i use to kiss cut stickers that have a laminate top later?
Seems impossible with the cricut but on the cameo I got it
Ok do you laminate your die cut stickers before you cut them?
Thank you for sharing !!!
Thank you so much! Did you attach, weld or flatten at any point?
Thank you so much for this video. I’m in the process of learning how to make stickers and this was so perfect. Thank you thank you 🤗
THIS WAS SO HELPFUL THANk YOU
Glad it helped!
This still didn’t work for me on my sticker sheets - which aren’t Cricut sticker sheets but the Q-Connect multi-purpose label sheets that I have. They still cut all the way through so I have to painstakingly peel off every sticker from the mat 😫. I have a Cricut Maker 3 so do you have any tips on how I can tweak the cut? Many thanks xXx
Hi thank for your great video. The stickers look super! However, my Cricut Maker 3 doesn't seem to do very well with kiss cut. I tried sticky note and washi tape and none of them work. I can HARDLY peel the stickers off. Is there another setting I should look at? I's a pity to waste any more paper. Please advise. Thank you.
Oh no! We're sorry to hear this Anna! Have you tried adjusting the pressure of the blade in the settings?
@@DesignBundles I have done it but it made a very slight difference. Could be something to do with a type of the blade? I’m using a fine point blade, which was already fitted in the machine.
Is there a way to make the template area larger? Like it seems such a waste when the paper is 8 x 11.5 and you only get a 6x9 area
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
Yay I love it. I was hesitant to buy the stickers cause i wasn't sure if it would work, glad I found this vidoe, thank you for sharing. I love it. Trying to get my sticker and notebook shop up and running :)
You are so welcome!
What kind of file are the stickers? For some reason my Cricut is not cutting out the stickers because it is not reading the image.
Thank you so much this was a easy and fast video ❤️
You're very welcome!
Hi thank you for this informative video, I just want to ask which type of blade did you use for the stickers? And also if I want to cut a dripping design on a foam craft which blade would be best to use?
Hi Cheska! Can you write in to mail@designbundles.net and let us know what type of foam you are using? Then we can make a blade suggestion! - Dawn
Please help
Me. I’m trying to make kiss cut stickers but when I take them off the Matt they’re coming out as dye cut stickers. I set the settings to sticky note but it’s still cutting too deep. What am I doing wrong?
change to less pressure
Can you laminate for the kiss cut and still use the sticky note settings?
Thank you
Gloria
Hi Gloria! You can use this laminate: www.143vinyl.com/styletech-mist-laminate-12-x-24-sheet.html to cover the stickers BEFORE you cut them with the machine! This way, it will provide a waterproof layer while adding a touch of fun color! They also offer clear laminate as well! - Dawn
A big thank you to you...I wanted them to stay on paper and couldnt get it....LIFESAVOR you are
You are welcome! 😊
Is there not some way to make it die cut the sheet and kiss cut the stickers? Got a Cricut bc I can't use trimmers properly. Seems like a simple task but having trouble figuring it out, it doesn't seem to let you change it as a second function like with the pen, and refeeding it never seems to line up right, often destroys product. Thanks, anyone who can offer help. Great video tho, was still helpful 👍
Wait, may have found it, seems a workaround is layering multiple copies of the deeper cut lines so it's still just a basic cut but extra cut where needed. 👍🤟
My stickers are always sticky on the back of them from the cricut mat so if I stack them the sticky residue that's left over from the cutting mat gets onto the printed side of the sticker it's stacked on top of. Do you have any tips on how to get rid of that sticky residue? I am using the light mat.
Love the video, very helpful! What sticker paper did you use?
Is there a video showing how to put a border around pictures brought in to do this too?
I can defiantly do a video on this :)
@@YouCanTotallyMakeThat That would be so awesome if you could.
Thank you for the tutorial, just learned how to make kiss cut stickers 🥰
Yay so happy!
@@DesignBundles do you sell your stickers on Amazon
What is the brand name of the sticker paper that you used?
Tysm this was a big help
Good video thanks
Thank you for taking the time to post. Do you have any suggestions for which kind of sticker paper to use that doesn't smudge? My printer is good, but the black smudges for some reason, all other colors just fine.
I'm not certain which paper was used in this video, but I personally have used paper from OnlineLabels. It hasn't smeared for me :) -Jordyn
@@DesignBundles That is the paper I am currently using, might be my printer. Will try one other brand to see it that is case. Thank you.
Thanks for sharing Great idea
Omg I been looking thank youb
What if it says not compatible when selecting sticky note?
I tried doing the cut out stickers yesterday but with 3d holographic sticker paper. I couldn't get it to cut until this morning then when it did it was all off, any tips?
Wish the titles for your videos differentiated if they are for cricut or silhouette.
Working on that :)
How does the cricut machine know to do kiss cut? Just by using sticky note? Do you need to outline your stickers in procreate?
Hi there! The files have a cut line made during the creation process that is recognized by the machine.
Hi. I bought this sticker packet. My brand new crickut air kept freezing. What am I doing wrong.
Great video, thanks for sharing. How did you line up the sheet on the mat after you'd printed it so that it would cut it at the right point?
The machine reads the black outline (somehow) and knows where to cut.
this was sooo helpful.thank you!
Glad it was helpful!
So I used sticky note and it still cut all the way through. What did I do wrong lol?
I threw out my old blade and replaced and the same thing. I even went in and lowered the pressure to the lowest, 70. Tried sticky, washi, so many options and it always cuts through. I think I wish I had kept my old dull blade just for kiss cuts!
Thanks! Very helpful.
This is helping a ton, thank you! Is there any way to fill out the whole page with stickers? It feels a shame to waste the paper you cut off for the sticker sheet. 😰
HI Avelin! Cricut has a limit on print size, which is 9.25" x 6.75", so that is the largest size you can use for print and cut projects 😊
What type of file is this, a png, jpeg, etc?
Excellent tutorial!!
I have a maker and I am trying to cut my stickers on a sheet. I used Sticky note with less pressure and it still cut all the way through. What am I doing wrong?
I would make sure your machine is calibrated, also I would double check your blade and settings.
Crystal please help me. I have been talking back and forth with Design Bundles support staff all week. They have tried very hard, but I still can't print my stickers. I'm using a PC and an Epson 2800 printer. I needed the stickers by 10/21. Any thoughts?
Hi Janice! I'm sorry to hear about your troubles. What part of the process is giving you trouble?
What sticker paper do you suggest?
I order these from amazon they are actually 8.5 x 11 shipping lables I get a box of 500 for $35
That is so cute!!
How would I design so that the cricut cuts all the way through around all the stickers for a back sheet as well as cut kiss cut for the stickers individually? tia :)
Probably by making a circle or square around image and also set it for cut?
@@Mariatrieseverything I have the same issue and this does not work, because it will kiss cut the sheet just like the stickers, instead of cutting out the sheet too
@@colorbugoriginals4457 add it as another layer and set it with more pressure. Hope that helps.
I have watched so many videos on sticker making and for the kiss cut stickers they are saying you have to make 3-4 copies of the background paper is this only if you add the offset you make the extra copies of the background paper so many times im a little confused
Hi Tawana! You wouldn't have to make extra copies. Once you flatten the offset and the original image, it will form 1 layer. If you have any additional questions, let us know at mail@designbundles.net We are here to help!
Would this work on a Cricut Joy since it has limited tooling capabilities (cutting, writing & foiling)?
Yes, you can use a Cricut Joy for this 😄 - Steph
This helped so much! Thank you for sharing!
Glad it was helpful! 😊
This video was very helpful. Love it 😊
Glad it was helpful! 😊
My sticker paper keeps getting jammed in my printer! Ugh... I tried taping a piece of regular printer paper to the back, and I'm only printing one sheet but it still won't work. I have an HP OfficeJet 4650 All in One printer. Can anyone help?
Awesome video helped a lot!
Glad it helped! Thanks for watching! 😊
Awesome! Thank you for sharing. Much appreciated.
You're welcome! I'm glad you enjoyed the video :)
Ive done the same steps but for some reason my cricut is cutting too far along the edges and cuts very crooked. Sometimes it cuts the background sheet too. Any helpful tips for that?
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
What about Scan & Cut CMs?
I have seen a couple of videos of people doing this but with sublimation, i was wondering if you have ever tried it out or would be willing to make a video on it. Ps. I just found your videos and they are so helpful
I will have to look into this
What about Silhouette Cameo?
I will get a video on this soon
i dont know what i am doing wrong, but it is trying to cut my whole image like a cut file.
Do you know what I am doing wrong where it’s cutting the entire details of the stickers out? Such as your wording on the pumpkin spice it would be cutting each letter? I made a logo in Canva and was trying to print stickers from it
This happened to me too, then I discovered the "flatten" button and it turned an image I had into the print & cut function needed to only cut out the border of the sticker. Hope that helps!
I am having such a hard time getting the cricut to read the registration marks 😩
I saw on another tutorial to cover the registration lines with matte scotch tape if you have glossy paper.
@@hiramclarkefilms6407 yes i kept seeing that and the matte tape didn’t work for me either 😭 what ended up working was masking tape and outlining the lines in sharpie on top of the tape. So much extra work 🥴
How can you make a design background instead of the kiss cut being white ?
easy peel stickers with tab using cricut maker
Thank you for watching!
Even using sticky note setting my cricut cuts right through the sheet.
Mine too.
Me too. I also adjusted the pressure to "less" but it still cuts all the way through. Boo!
@@hiramclarkefilms6407 yup. Same. I just cannot get it right.
What kind of sticker paper was that?
The sticker paper can be found here - amzn.to/2VfHx93
Wich cricut machine you are using ? I want to purchase one for me and my daughter to do crafts would so appreciate it :)
Cricut Explore Air 2 was used in this video but you can do this on many different cutting machines 😊
Cool yes I'm interested but I'm a beginner lol just gotta make sure I get one fit for what I want to do tysm for the response 😊
Cardstock setting still kiss cuts my paper
my measurements are coming up CM not inch, anyone now how to change that?
I tried this but didn’t work
What part didn't work for you?
sticky note option didn't work for me. you shouldn't say that it will work on any sticker paper. you haven't tested all of them.
The sticky note setting cut all the way through for me :(
Sticker paper varies greatly in thickness so definitely play around with the settings. You could try the Paper setting. Or do Sticky Note and change it to less pressure. Hopefully one of those will work for you :)
It still cut all the way through - I followed your steps. Maybe I should have selected "less" on the cut?
Did you use the Sticky setting? You could also try Paper to see if that works better. You may need to play around with the settings as all sticker papers will be different thicknesses.
@@DesignBundles I use the Washi Tape setting and that works. :)
What paper(s) are you using for the die cut - kiss cut stickers??
Hi Kellie! We've used the Cricut Sticker Paper and haven't had any troubles! - Dawn 🙂