Part 2# Beko Condenser Tumble Dryer. How to fix it when empty water tank appears on display …😠🤬
HTML-код
- Опубликовано: 11 июл 2023
- Hy guys.
In this video I will show you a common issue which appears on condenser tumble dryer. In this case I will check a Beko DTKCE90021W If you are interested much more same video like this, follow my RUclips channel!
Thanks for the watching 😉
See you soon 👋 
Наука
I cleaned& emptied everything but my machine wouldn’t work then I came across your video.
I followed your video & found it was full of water! Emptied it and now it’s working again!
Thank you sooooo much!!!
Well done Emma!
I done all this.. when I put the pipe in to test it, nothing came out 😭😭
Explained very well.. thank you for your time..
Thank you for sharing your experience! 👍
Big Thanks George, fix would have taken me 5 x longer / never without this video. Much appreciated.
Thanks Tom for your feedback, good to hear it’s worked for you!
Great video. Ive learnt alot about how my dryer functions. Thank you
You’re welcome
I just watched this to fix the exact same problem..worked a treat..thank you😊
Great job!
Brilliant Job !! Thank you so much for your effort n Video , I watched and solved the same issue !! Saved me time,hassle and money 🙏🏽
Much Appreciated n Bless you !
Thanks mate! 👍
Great video, well presented and very clear.
Thank you
Fixed my dryer now thank you, replaced starter condenser.
Well done Bill!
Just fixed my dryer, hopefully anyways, so far so good. Slightly different model to the one here but still very helpful thanks
You’re welcome
Fantastic video repaired my unit today, 2 months after warranty ended it died 😂
Great Andrew! Good to hear that!
Thank you so much for this, life saver🙌🏻
No problem 😉
Hey George thank you so much for the video - I have a beko dryer, not exactly the same as in the video so what I did was just the very first steps and removing all the water from the tank behind. Looks like it’s working fine now, would emptying this tank on a regular basis solve temporary the problem? Is it what triggers the “empty water tank” indicator ?
Thanks
Stéphane
Hi Stephane,
The water pump doesn’t work well this cause the problem. If it would work well water shouldn’t remain in the tank only just a little bit, but that wouldn’t be a problem.
bonjour - merci pour ce tuto, c'est exactement le souci que je rencontre actuellement, je vais pouvoir ouvrir à l'arrière pour vider l'eau encore merci à vous
You’re welcome
Hello I have this model of condenser dryer and it seems to be working and heating but when I put it on extra dry program it makes a large screeching sound and doesn’t come on, do you have any of your videos to advise me what to check?
Hi,
Drying setting should not have effect on noise. In my opinion there is no relation between extra dry settings and noise.
Hi sir, great job
I would like to exploit some of your knowledge. I own an LG dryer, it keeps saying empty the tank, when I set it to cleaning mode by adding 1.5 litres of water through the water container port, when I start the cleaning program the pump sucks the water and brings it back to the water container (I messured it, it brings almost 1.5 litres back) and then it stops by showing the light of empty the water. The pump seems to have a good flow pressure, I checked it from the water compartment with the tank off, I could see the water pressure that the pump was bringing. I have it on top of my washing machine and drainage is available, would hooking it to the drainage help? Or sounds that I maybe have a faulty pump starter? Maybe something else causes the problem? Vents are clean, should I take it apart to clean possible fluf? It's a dual inverter heat pump dryer, 9kg, with WiFi and I wouldn't want to trash it
Hello Dimitrios,
I recommend firstly a big clean all around the drum, pump. That is always useful. May the micro switch is defective or the floating switch. If you can let’s try to hook to the drainage, may that will sort your problem. I don’t get used to repair heat pump dryers, so I can’t say anything surely. Good luck!
Hi George ! Thanks lot for sharing this video.
Just question, then other pipe is inside water , from condensation, right? And the other pipe its out water for small deposit or if we want, for draining water into the house sewer .
Thanks 🙏 good job
Hi Fabio,
If you want to put on sewer you should use the tube where water is pumping up into the tank. The other is the overflow water pipe.
I’ve tried everything on video (which is excellent)including a new pump,also tried heat reset button & tested electrics there but it’s still stopping after a few mins,I also notice there’s no heat in those few mins either,any other ideas I could try,the dryer is 2 years old
Hi Pamela,
It could be so many things. I seen so much absurd reason. A tiny kitchen foil appeared by heating element and caused sort circuits. Other time where wire joined to heating element was a little oxidation and the blocked electric flow. These are examples, but I don’t know without diagnosis where and what is the problem in your machine. Check the condenser is it clean? Excessive fluff block hot air flow and can’t heat up the cloths and also stop the machine.
I hope you can fix your dryer. 🤞
I have this tumble dryer but my control panel doesn't light up and no sound when i move the dial. I've checked the socket and the fuse nothing wrong there. any idea what what i can do fix this please.
Hi,
I presume control panel issue. To replace it is quite pricey. Not sure if it’s economical to replace it. I can’t be sure as haven’t seen it.
Thanks
Hi Tom,
I’m incredibly grateful for supporting my channel! 👍😍
Thank you 😅🎉
Mission completed?!👍
Hi After checking my switch its fine works ok, but there seems to be 240 volt at the pump all the time ? surely this isnt normal, and before i go buying another pump, thanks in advance
Hi,
Sorry, I can’t answer your question. I don’t get used to check the voltage in the pump. If doesn’t work I replace it. I shouldn’t change the switch in any case , so I presume the pump is defective.
👌🌹
Thanks!
Hi i have this same dryer in video it doesn't dry cloths even after running it for few hours evry filter pipes and evaporator fins are clean, it does not condense.any would be grate thanks
Hi! Try this: BEKO condenser tumble dryer (DCX71100W) don’t heat up. How to reset the heating element thermostat🤔
ruclips.net/video/ub_0HY2Mm3g/видео.html
@@georgesworkshop8600 thanks for the reply, my dryer is heat pump it does get warm and air circulates but its not condensing the evaporator doesn't get cold and the compressor does run.
Any help will be nice. Anything i can check to get it working again
Sorry, I don’t get used to fix heat pump dryers as they are complicated and expensive to fix
I have the same problem, so I watched your video. I opened the pump housing, emptied all the stored water from the bottom reservoir, cleaned everything. But during diagnosis I found, as soon as I press the micro switch up, the pump motor does not start but the machine stops with "Empty water tank" light. If I start the machine again, the pump motor starts, runs for about 20 second, then stops and the machine continues running. If I press the micro switch up again, the same thing happens that is the motor does not start but machine stops with "Empty water tank" light. I replaced the pump with a new one, but the problem does not go away. Any idea what is going on here?
Hi,
Do you mean after pump replacement the machine stops after a few seconds? And starts when you press micro switch?
One thing to test
Put some water into the water tray and check does the pump push up in to the upper water tank. May there is a blockage in the water tube or somewhere else.
@@georgesworkshop8600 Not exactly. After replacing the pump, I am at the testing phase as you described in your video. I turn on the start switch, the machine starts. Then I press the micro switch, the pump does not start but the machine stops and Empty Water Tank warning light comes on. Now if I press the machine start switch again, the machine starts, the pump motor also starts by itself in a couple of seconds (note that I have not pressed the micro switch), the pump motor stops by itself after about 5 seconds, machine continues running. Then if I press the micro switch, the pump motor does not start, but the machine stops with "Empty water tank" light. The same issue was seen when I was doing diagnosis on the old pump. I think the old pump is not faulty. But the problem is somewhere else.
@@georgesworkshop8600 Yes, I'll check the pump to see it pushes up the water. Please let me know if there are any other things I need to check too.
Sorry, this need more investigation, but blindly I don’t want to guess.
I was about to buy one of these but this fix video and the comments have put me off, somewhat.
How common is this failing in this model?
Cheers.
It could happen on other makes and models as well. It isn’t more common than on others.
@@georgesworkshop8600 That's good to know. Thank-you for the reply.
OK, so watched your video after my dryer stopped working. Bought a new drain pump motor, but the 'wheel' in it spins, before i even lift the metal thing or select a program or anything 😂 what am i doing wrong?
Hi,
I don’t think you did anything wrong. This is quite normal. When it switched on the machine starts with a short pump, probably you seen that. Is the program running?
Hi, where can I order a new drain pump?
Hi,
I order all parts from ebay. Simply type the model code and the parts name
Where can I buy the replacement pump please?
Hi, you can buy on the Ebay.
@@georgesworkshop8600 thanks so much! What’s its called bud? Does it have a specific model number?
Hi,
You can buy from eBay with model number
Simply type in beko pump and model number
So I am guessing that tank is for the over flow?
Hi,
When you tried did it run the programme until the end? I mean did dry the dish towel completely? Is the heating element ok?
@@georgesworkshop8600 Hi George. It ran perfectly fine heating ok etc. I left before it ended. She tried running it on timed and cool to rule out sensor and over heating and is telling me it does the same but timer continues to count down
It basically only ran the times I tried granted I ran it with a wet tea towel not a load. She says it runs for about a minute
Hi Paul,
Have you tested the capacitor? May with full load it can’t give enough power to start turn the drum. This is why it ran ok with a tea towel, but stop with a normal load.
@@georgesworkshop8600 Thanks for the reply this is what I was wondering. She said she ran it empty to. She says it seems intermittent. She said this today 'It just doesn't want to go only randomly will start a cycle'
Only had mine for a few days and started doing this already. Im just gunna ask for a refund.
If you can ask for a refund, then that is the easiest way.
I was about to buy one of these but this fix video and the comments have put me off somewhat.
Thought this video would be helpful ffs, ye we will have this equipment lying around and a spare drainer pump, thanks for nothing waste of time watching this video
Hi,
For the repair I used only 1 screwdriver, and used that cheap multimeter to explain my actions. If the pump is broken there is no other way to fix it, must replace it. I never thought everyone has a replacement pump at home, but easily and quickly can buy from ebay if you want to fix your machine.
I hope you found other video on RUclips to fix your dryer much easier way.