You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you Richard! Saved my day and router! I finished setting up two routers as per your 2017 video on how to extend my network with LAN wired process. I bricked my TP-Link C7 4 times and was able to unbrick it each time using this TFTP process. Great Save! Am now using the LAN wired extension setup but without DD-WRT firmware upgrade. After the 4 brickings and unbrickings I decided to try without DD-WRT and was able to configure the extension fine. Been up for over a week now with no problems! By the way, when I was getting the DD-WRT firmware for my TP Link router it specifically said there was no way to recover back to OEM firmware if I bricked my DD-WRT upgraded router. That's not true. AS I mentioned I un-bricked mine 4 times very easily. Thanks again.
You are most welcome. Thank you for watching, commenting, the valuable feedback and the kind words. I appreciate it greatly. I am happy to know I could help. All the best.👍😀
Thank you very much sir ! I just bought my tplink wr940n yesterday, i bricked it last night, and here i am, i fixed it already with your awesome tutorial. Thanks again sir and God bless.
Hi Richard!! I just want to thank you for helping me storing the default firmware of my tp-link router. You know how your video help me, I watch all video of how to fixed my router and non of those are worked, only yours. So Thank you so much. God Bless you ☺️
You're most welcome. Another one SAVED! Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you so much, I updated my Tp-Link Archer C60 and after that it stopped working, I was already looking for a new one but I decided to look for a fix and your video revived my router. Thank u!
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Happy to hear that you had success and that we saved another one from the recycle bin! I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Hey Richard Just want to say Thank You for this educational video it certaintly helped alot to Recover my tp-link c1200v1 it was a dead brick and its now a resurected beast thnxs again.
This video helped me restore my TP-Link C7 AC1750 V5 to its default OEM fimrware since I upgraded it to DDWRT fimrware. There was no webrevert file available for my router so performing TFTPD helped me go back to original firmware.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Hi, Richard: Thank you for the clear and concise instruction video. I have a TP-Link Archer C20 V4 that got into the flashing LEDs mode, just like what you show in the video, after a recent F/W reload. I followed your procedure as exactly as I could. Everything seemed to work according to what you said. After the F/W got loaded, one LED (power) stays on and another on the far end flashed quickly just like in your video. After awhile, however, the LEDs went back to the original way of flashing (with the far right one toggling between green and amber). Below is the Log View of my session. It appears to be normal because it looks very much the same as your log. Connection received from 192.168.0.2 on port 3700 [18/11 15:21:18.339] Read request for file . Mode octet [18/11 15:21:18.339] OACK: [18/11 15:21:18.339] Using local port 52489 [18/11 15:21:18.339] : sent 15874 blks, 8126976 bytes in 6 s. 0 blk resent [18/11 15:21:24.454] Please comment and advise. Thank you so much. Abe (2019-11-18 15:52)
Thanks for your video and effort. Work quiet well for my TP TL-WDR4300 N750. I used that router as an WLAN Access Point and somehow managed to brick it... thaks to your video everything is now working as it should be
As an aside, I've had an LTE modem/router fried when I connected my TPLink Archer 1800 to it's lan port. I had a MOFI 5500 get it's Cmos knocked silly and it took me quite a while to straighten it out with another one of the same model 1800. Took me a few hours but now it's back up and running. I can't bring myself to plug either of these 1800's into anything else. In my experience, TP LInk makes excellent equipment, especially for the home market but I think I'm going with a low end ASUS now. It was quite a hassle for a $80 router.
I have never had a issue like that with a TP-Link router. Mind you I use DD-WRT third party firmware on all my routers too. But the stock TP-Link firmware has not done it either. Again I'm not using a and Archer 1800 or LTE modem so it might be something specific to the 1800 and the LTE modem. I have blown LAN ports with static discharges too (My fault for not grounding myself, expensive lesson). But I doubt that was the cause here. I may buy an AX1800 just to have a look at it but I'm hestitant to do so because it's not compatible with the DD-WRT firmware. Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.👍😀
You're most welcome. Thank you so much for watching, commenting and the very kind words. I am happy to know you get value from my content. Comments like this make my DAY! I appreciate it greatly. All the best.👍😀
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
You really saved me ! Thank you. It works perfect now. I bricked my TL-WR940N Ver. 5 because used a wrong Update firmware. Renamed bin file is a masterpiece idea.
You're most welcome. Excellent! I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you! Your video is great and solved my problem. The only comment is I´ve to disable the windows firewall, after that, everything worked fine!!! Congratulations
You're most welcome. I'm glad and very happy to know that I could help you. That firewall can be troublesome at times. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you! I applied it on my WR1043N V5 successfully! It's good to know that the update worked with TFTP only in Win 7. Tried it on Win 10 Pro, but it didn't worked.
Works amazing!! I had one issue with my Archer C6 V2. None of the firmwares availables in the website worked for my router. What I did was to go throught the forums with different firmwares for this router and try several times until I got the version that my router needed! I needed an older version of the firmware which was not officially available anymore. So if this happens with your router try that!
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Yet another great video. I purchased a used TP-Link at the Goodwill store for $3 with the intent to use as a WiFi extender. I discovered it was bricked and now will see if this fixes it.
$3! That's a great deal! Please get back to us with the model number and what your results were in rescuing it! I would love to know. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Nice tutorial video Richard. Was looking for something else and came across this video and watched it. I don't have that model tp link router but your explanation was extremely clear and thorough.
Very useful and detailed video. I don't know if this process will work for my Netgear router but at least I know the correct steps to take compared to other videos and articles I have came across.
Netgear has a similar repair. I made a video on an older netgear recovery here: ruclips.net/video/0K8sVuCrPt4/видео.html Check the Netgear site for the procedure pertaining to your particular model as there may be differences between models. Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Richard, thanks for helping me to recover my dead TP link WR841ND, I am already subscribed and discovering more interesting videos from your channel, excellent work and greetings from Patagonia Argentina
11 месяцев назад+1
Man you're awesome thank you soooo much i was going through this for 4 hours and even. Communities related to this didn't explain it like did ❤
You're most welcome. Glad it helped! Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
HiRichard, Thank you too much, i have tplink 3020 and i faced the same problem but now working very good after i watched your video, really thank you again
@@richardlloydusa Sorry Richard but I'm sort of confused here because TFTP doesn't require soldering... At least I'm not aware of it and I didn't need any soldering when I used TFTP recovery. ?
Hi Richard - I bricked my Archer C8 and replaced with Netgear. I have tried to follow your instructions to save the C8 but cannot get anything in the log file. I must be missing something. Downloaded all files, plugged C8 into desktop, changed address , reset, powered on but zero in log file to find file name. Help!
So cool to know. You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀
You are most welcome. I am glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks. In C7 Archer V2 you need to press the WPS button just when the WPS LED turn off (exactly when it turn off, 5 sec rules doesn't apply. You need to wait 15 sec aprox)
Great info, thanks for your effort and research into this issue. I currently have an older Lynksys E2500 N600, 300 on both bands, router and I think I need to get a newer one due to having to reboot it many times recently. From this video I may look into TP-Link models in the AC levels. Thanks, any comments or recommendations would be appreciated. FYI: I do not game.
You are most welcome. I have a TP-Link AC1900 Smart Wireless Router (Archer C9 V1) speeds up to 1.9GBPS (600+1300 Mbps) Dual Channel plus it has a USB3 and a USB2 port for external network drives! It is by far the BEST router I have owned. Here it is at Amazon: amzn.to/2UIJatT or eBay: ebay.to/2WU7aYl The version 1 through 4 are supported by the third party firmware DD-WRT but the V5 is not yet supported. It's a crap shoot what you will get from Amazon as far as version number goes but the eBay link I gave you promises a V3. If you are not going to use DD-WRT then it does not matter which version you get as I am sure they will all be stellar performers with the stock TP-Link firmware. BTW they do sell them refurbished as well for further discount. Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Sir you are god to me. I taught my router is dead and i taught i should face problem with my father. After seeing this first i failed and then succeded. Anyway Thanks a lot sir.
I will be posting an update soon. I have been very busy with a home purchase and renovation but I am almost ready for a walk through video of "The Home RUclips helped me buy.". I shall return and continue my journey here. BTW I passed the 100,000 subscriber mark today too!
You're most welcome. Glad it helped. Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. I'm sure it will help others with different TP-Link routers who this may work for. I'm getting quite a few different people telling me so here. Subscribe, Click The Bell and stay tuned! All the best.👍😀
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Make sure you have plugged the ethernet cable into one of the LAN ports on the router and that you have configured the ethernet connection settings on your computer correctly. If all that is exactly as I show in the video the only other thing that could cause it is a firewall (windows has one built in) Google how to turn it off and try again. Another suggestion is uninstall the TFTP program and reinstall it at which point the firewall should ask you if you want to let the program access the network. See this video where I show it asking the question here: ruclips.net/video/FKZD_2V1sMc/видео.html Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
2 года назад+1
Thanks. It's really have effect. I was save my router successfully. Thanks bro one more time
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Please sr respond me. I need to know if this method works in an old tl-mr3220 v1. I brick it trying to put dd-wrt, I try before the tftp method but didn't work (no text in the log box) like if it wasn't recognized. I'm from a poor country and I can afford a new one. Pls respond me
You are most welcome. I am glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Hi Richard, what is the procedure when the LAN ports are blocked? TFTP will not work as there is no link between the router's LAN ports and the PC where TFTP is running. Is it possible to connect to the router via TTL?
Try this procedure: ruclips.net/video/oAsACOAM4DM/видео.html Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Give it a shot. You never know. I have many videos dealing with bricked router recovery. So look through those and see if any can help you. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
Saved another one from the scrap heap. You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks, man. I'm running a Tp-Link WR1043ND v2 router and i can't figure it out how to set up an automatic schedule restart . Do you have some advice ?
You are most welcome. I'm glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
hi, what can i do if there are no log messages? i think the firewall i blocking the connection but i tried to open prot 69 and it didn't help windows 10 home, thanks in advance
Hi, Richard. I know this question is a little off topic. But can you do a step by step video on how to port forward. I want to port forward my home video cameras. I had them port forwards before, but I had to hard reset my router and I lost my port forward setting. I do no the IP address, and port numbers to my cameras, but don't know to set them back up. Thanks. Like your videos on routers.
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
My router is C60, I was trying to get back to stock from openWRT, But I bricked it there :( Current Condition - Power LED lights up. GUI based interfaces won’t,PuTTY won’t Telnet won’tWinSCP can't. I've followed every steps you mentioned, But there's nothing appearing on TFTPD screen :( , Please save me Sir.
Hi Richard. I've done my best to follow the instructions but nothing shows up in the log when booting up the router. Is there anything else I can do or did I screw up somewhere along the instructions? In any case, looking forward to your reply. Update: i was able to see the log and load the file onto the router (i think) but then the router just keep booting on and off
You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
![[Limbus Company - PV] Chapter.7 - Oblivion](http://i.ytimg.com/vi/VUpkXPkvoxU/mqdefault.jpg)
Your video was an absolute lifesaver! I was fighting with my freakin router for 2 hours until I found this tutorial. Thank you
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you Richard! Saved my day and router! I finished setting up two routers as per your 2017 video on how to extend my network with LAN wired process. I bricked my TP-Link C7 4 times and was able to unbrick it each time using this TFTP process. Great Save! Am now using the LAN wired extension setup but without DD-WRT firmware upgrade. After the 4 brickings and unbrickings I decided to try without DD-WRT and was able to configure the extension fine. Been up for over a week now with no problems! By the way, when I was getting the DD-WRT firmware for my TP Link router it specifically said there was no way to recover back to OEM firmware if I bricked my DD-WRT upgraded router. That's not true. AS I mentioned I un-bricked mine 4 times very easily. Thanks again.
You are most welcome. Thank you for watching, commenting, the valuable feedback and the kind words. I appreciate it greatly. I am happy to know I could help. All the best.👍😀
Thank you very much sir ! I just bought my tplink wr940n yesterday, i bricked it last night, and here i am, i fixed it already with your awesome tutorial.
Thanks again sir and God bless.
Many thanks for this very detailed tutorial.
Works great on my broken TL-WR841N after uninstalling the OpenWrt firmware. I can finally use it again !
Hi Richard!! I just want to thank you for helping me storing the default firmware of my tp-link router. You know how your video help me, I watch all video of how to fixed my router and non of those are worked, only yours. So Thank you so much. God Bless you ☺️
You sir, are a legend. Thought my router was dead for 2 months, and it's alive again!
You're most welcome. Another one SAVED! Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you so much, I updated my Tp-Link Archer C60 and after that it stopped working, I was already looking for a new one but I decided to look for a fix and your video revived my router. Thank u!
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀
Sir, you saved my day! I was ready to buy another router! Thank you so very much!
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
@@richardlloydusa hello! My problem is that tftpd doesnt find any specified file, just tp_recovery.bin. Any ideas what is wrong? Thank you!
Thank you Richard,
this video helped me saving my router from coma to a very new life.
Happy to hear that you had success and that we saved another one from the recycle bin! I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
THANKS!
I was not able to debrick my router many (rather hasty) attempts...
your suggestion to looking to log tabs saved me :)
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Hey Richard Just want to say Thank You for this educational video it certaintly helped alot to Recover my tp-link c1200v1 it was a dead brick and its now a resurected beast thnxs again.
This video helped me restore my TP-Link C7 AC1750 V5 to its default OEM fimrware since I upgraded it to DDWRT fimrware. There was no webrevert file available for my router so performing TFTPD helped me go back to original firmware.
I am glad to know I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Man, cheers from Brazil. I did the recovery on Tp Link Archer C25, and it worked perfectly. Thanks for the tutorial.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Hi, Richard: Thank you for the clear and concise instruction video. I have a TP-Link Archer C20 V4 that got into the flashing LEDs mode, just like what you show in the video, after a recent F/W reload. I followed your procedure as exactly as I could. Everything seemed to work according to what you said. After the F/W got loaded, one LED (power) stays on and another on the far end flashed quickly just like in your video. After awhile, however, the LEDs went back to the original way of flashing (with the far right one toggling between green and amber). Below is the Log View of my session. It appears to be normal because it looks very much the same as your log.
Connection received from 192.168.0.2 on port 3700 [18/11 15:21:18.339]
Read request for file . Mode octet [18/11 15:21:18.339]
OACK: [18/11 15:21:18.339]
Using local port 52489 [18/11 15:21:18.339]
: sent 15874 blks, 8126976 bytes in 6 s. 0 blk resent [18/11 15:21:24.454]
Please comment and advise. Thank you so much.
Abe (2019-11-18 15:52)
Mine is in the same state now. Did you get it to work?
Thanks for your video and effort. Work quiet well for my TP TL-WDR4300 N750. I used that router as an WLAN Access Point and somehow managed to brick it... thaks to your video everything is now working as it should be
As an aside, I've had an LTE modem/router fried when I connected my TPLink Archer 1800 to it's lan port. I had a MOFI 5500 get it's Cmos knocked silly and it took me quite a while to straighten it out with another one of the same model 1800. Took me a few hours but now it's back up and running. I can't bring myself to plug either of these 1800's into anything else. In my experience, TP LInk makes excellent equipment, especially for the home market but I think I'm going with a low end ASUS now. It was quite a hassle for a $80 router.
I have never had a issue like that with a TP-Link router. Mind you I use DD-WRT third party firmware on all my routers too. But the stock TP-Link firmware has not done it either. Again I'm not using a and Archer 1800 or LTE modem so it might be something specific to the 1800 and the LTE modem.
I have blown LAN ports with static discharges too (My fault for not grounding myself, expensive lesson). But I doubt that was the cause here. I may buy an AX1800 just to have a look at it but I'm hestitant to do so because it's not compatible with the DD-WRT firmware.
Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.👍😀
FIrst of many, many guides WORK for me!!!!! Thank u so much, u saved my ARCHER C7!
You're most welcome. Thank you so much for watching, commenting and the very kind words. I am happy to know you get value from my content. Comments like this make my DAY! I appreciate it greatly. All the best.👍😀
Fantastic - clear and easy to follow and successful. Thank you so much Richard.
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
The best video. Thank you. I was able to revive my locked router more than 1 year ago
Whoa, the only person that has explained it properly!
Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
This hardcore saved me time, money, and frustration. A golden video! Thank you!!!!
You really saved me ! Thank you. It works perfect now. I bricked my TL-WR940N Ver. 5 because used a wrong Update firmware. Renamed bin file is a masterpiece idea.
Thanks Richard. Your methodology also works perfectly for the TL-WA801NDv2 access point.
You're most welcome. Excellent! I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
This worked for my Archer C7 but I had to change my IP to 192.168.1.66 before TFTP would see my router. Thank you very much.
Great guide, just recovered my bricked TP-Link Archer A6!
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you! Your video is great and solved my problem. The only comment is I´ve to disable the windows firewall, after that, everything worked fine!!! Congratulations
You're most welcome. I'm glad and very happy to know that I could help you. That firewall can be troublesome at times. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you! I applied it on my WR1043N V5 successfully! It's good to know that the update worked with TFTP only in Win 7. Tried it on Win 10 Pro, but it didn't worked.
Thanks Richard! I've done this in the past and forgot about it. This was an excellent refresher.
Your tutorial is simply perfect. Works like a charm. Thank you very much.
Works amazing!! I had one issue with my Archer C6 V2. None of the firmwares availables in the website worked for my router. What I did was to go throught the forums with different firmwares for this router and try several times until I got the version that my router needed! I needed an older version of the firmware which was not officially available anymore. So if this happens with your router try that!
Thank you so much for watching, commenting, the very valuable feedback and the very kind words. I appreciate it greatly. All the best.👍😀
THANKYOU SO MUCH SIR FROM INDIA ....I FIXED MY ROUTER CUZ OF U ...SAVED BUCKS
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Yet another great video. I purchased a used TP-Link at the Goodwill store for $3 with the intent to use as a WiFi extender. I discovered it was bricked and now will see if this fixes it.
$3! That's a great deal! Please get back to us with the model number and what your results were in rescuing it! I would love to know. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Nice tutorial video Richard. Was looking for something else and came across this video and watched it. I don't have that model tp link router but your explanation was extremely clear and thorough.
Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Very useful and detailed video. I don't know if this process will work for my Netgear router but at least I know the correct steps to take compared to other videos and articles I have came across.
Netgear has a similar repair. I made a video on an older netgear recovery here: ruclips.net/video/0K8sVuCrPt4/видео.html Check the Netgear site for the procedure pertaining to your particular model as there may be differences between models. Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Excelente video, me ayudó a reparar mi router al cual le intenté instalar OpenWrt y quedó muerto, nuevamente muchísimas gracias.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Cómo le haces para que te muestre algo en la sección de log viewer?, A mí no me muestra nada tengo un Archer c6
Richard, thanks for helping me to recover my dead TP link WR841ND, I am already subscribed and discovering more interesting videos from your channel, excellent work and greetings from Patagonia Argentina
Man you're awesome thank you soooo much i was going through this for 4 hours and even. Communities related to this didn't explain it like did ❤
You're most welcome. Glad it helped! Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
Renaming the firmware file was the solution for me . Thank you so much !!
You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Great video man. helped remove internet providers firmware and restored it to original manufactures firmware. thanks heaps
You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
1000 Thanks !!!! You actually saved my bricked TPlink wa901nd . Subscribed.
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Yes we recovered our Wi-Fi router... Great for your information
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanx dear it really worked for my TL-WR740N bad firmware installed
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
HiRichard,
Thank you too much, i have tplink 3020 and i faced the same problem but now working very good after i watched your video, really thank you again
How press button reset and power sir? I have problem LED only power
Thank you so much sir! With your instruction video my router came back to life !
Good channel, great content, very good videos but i dont understand why this man does not deserve million of subs
Dude I love you! You saved my life! Worked perfectly.
Greetings straight from Brazil.
Thank you very much!!!
God bless you a lot!!!
thank you richard. my 940n back to normal now with your tutorial. appriciate.
I have a TP-Link Archer C5 v4 and nothing shows up on the log when I do the reset-hold-and-power-on part. Can you help?
Check your connections to the motherboard (soldering and correct connections) TX to TR etc. Thank you.
@@richardlloydusa Sorry Richard but I'm sort of confused here because TFTP doesn't require soldering... At least I'm not aware of it and I didn't need any soldering when I used TFTP recovery. ?
Hi Richard - I bricked my Archer C8 and replaced with Netgear. I have tried to follow your instructions to save the C8 but cannot get anything in the log file. I must be missing something. Downloaded all files, plugged C8 into desktop, changed address , reset, powered on but zero in log file to find file name. Help!
192.168.0.1 or 192.168.1.1 or 192.168.2.1
Thank you very much! I solved my problem with this tutorial. Hello from Germany!
So cool to know. You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Awesome video, I was trying to get this to work on a mac but it was very challenging, with the gui on this program for windows it's so much easier!!
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀
you win the internet today, thank you
You are most welcome. I am glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks you very much.I got returen my router.You are good man. God bless you
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Your steps to recover my router was success.
Thanks. In C7 Archer V2 you need to press the WPS button just when the WPS LED turn off (exactly when it turn off, 5 sec rules doesn't apply. You need to wait 15 sec aprox)
Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.👍😀
Great info, thanks for your effort and research into this issue. I currently have an older Lynksys E2500 N600, 300 on both bands, router and I think I need to get a newer one due to having to reboot it many times recently. From this video I may look into TP-Link models in the AC levels. Thanks, any comments or recommendations would be appreciated. FYI: I do not game.
You are most welcome. I have a TP-Link AC1900 Smart Wireless Router (Archer C9 V1) speeds up to 1.9GBPS (600+1300 Mbps) Dual Channel plus it has a USB3 and a USB2 port for external network drives! It is by far the BEST router I have owned. Here it is at Amazon: amzn.to/2UIJatT or eBay: ebay.to/2WU7aYl The version 1 through 4 are supported by the third party firmware DD-WRT but the V5 is not yet supported. It's a crap shoot what you will get from Amazon as far as version number goes but the eBay link I gave you promises a V3. If you are not going to use DD-WRT then it does not matter which version you get as I am sure they will all be stellar performers with the stock TP-Link firmware. BTW they do sell them refurbished as well for further discount. Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Life saver.. thanks a ton.. It worked with my TP-Link Archer C60. I'm super happy
Thanks so much Richard for the composing this video. Cheers!!
Thanks for the video, I'm trying to fix a different device but your clear process helped.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
thanks! easy to follow, managed to fix my 901nd AP.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Sir you are god to me. I taught my router is dead and i taught i should face problem with my father. After seeing this first i failed and then succeded.
Anyway Thanks a lot sir.
This process works for a TP-LINK router with OpenWRT installed?
Hope all is well! Haven't posted in awhile.
I will be posting an update soon. I have been very busy with a home purchase and renovation but I am almost ready for a walk through video of "The Home RUclips helped me buy.". I shall return and continue my journey here. BTW I passed the 100,000 subscriber mark today too!
Thanks a lot. This worked in an Archer C25 V1.
You're most welcome. Glad it helped. Thank you so much for watching, commenting and the valuable feedback. I appreciate it greatly. I'm sure it will help others with different TP-Link routers who this may work for. I'm getting quite a few different people telling me so here. Subscribe, Click The Bell and stay tuned! All the best.👍😀
Thank you so much. It worked great for me on a TP-link-MR3220 Ver2.2
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
I have TL-WR940N when I powered up only the blue light blinking, I've tried this option didn't work out other advice
Hi Richard, I am following the way you explained but the TFTP log viewer does not shows anything.. Can you please help me
Make sure you have plugged the ethernet cable into one of the LAN ports on the router and that you have configured the ethernet connection settings on your computer correctly. If all that is exactly as I show in the video the only other thing that could cause it is a firewall (windows has one built in) Google how to turn it off and try again. Another suggestion is uninstall the TFTP program and reinstall it at which point the firewall should ask you if you want to let the program access the network. See this video where I show it asking the question here: ruclips.net/video/FKZD_2V1sMc/видео.html Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
Thanks. It's really have effect. I was save my router successfully. Thanks bro one more time
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Please sr respond me. I need to know if this method works in an old tl-mr3220 v1. I brick it trying to put dd-wrt, I try before the tftp method but didn't work (no text in the log box) like if it wasn't recognized. I'm from a poor country and I can afford a new one. Pls respond me
Excellent presentation of invaluable material, you're doing an awesome job sharing details in easy to follow steps. I am happy I found your channel!
You saved my router. And middle finger salute to TP LINK officials 😬
Thank you sir, you really really saved my day! Lots of love from Nepal.
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thanks, its work on my tp link mr 3420v3 and mr3020v1.
Once again, thank you
You are most welcome. I am glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks for saving my TP-LINK TL-WR841N V8 Router😅.
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
You are the best .man .. you save me for buying a new one
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you very much for all the efforts. detailed steps, we appreciate! God bless
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Worked on an Archer A6 V2. Tysm!
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks dear. Today I found this video really helpful for me 🥰
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Hi Richard, what is the procedure when the LAN ports are blocked? TFTP will not work as there is no link between the router's LAN ports and the PC where TFTP is running. Is it possible to connect to the router via TTL?
Try this procedure: ruclips.net/video/oAsACOAM4DM/видео.html Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
It just works...thanks man, you save my router!
You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
How can I give you big thanks without meeting you!
❣️❣️❣️
I'm flattered. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
Hello Richard, thank you for tutorial vid! I have a 940N v1.3 router without power button (older white box). How can i step into recovery mode?
how can I use it on a Deco M5 do you have a video?
Hi king my 'turn on logo' keeps blinking and nothing really helps... do you think this would sove my problem on my archer mr600 ? Thank you so much !
Give it a shot. You never know. I have many videos dealing with bricked router recovery. So look through those and see if any can help you. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
YOU SAVED MY LIFE. I LIVE OUT IN THE STICKS AND I FUCKED MY ROUTER BUT THIS HELPED. RECCOMMEND 10/10
Saved another one from the scrap heap. You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thanks, man. I'm running a Tp-Link WR1043ND v2 router and i can't figure it out how to set up an automatic schedule restart . Do you have some advice ?
this one save my day. works on my cpe
thanks for the tutorial, sir
Help me too man
May Allah Bless you bro😊😊you save my money...and also you have teach me a good thing😊😙😙😚
You are most welcome. I'm glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Muchas Gracias.
Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
hi, what can i do if there are no log messages? i think the firewall i blocking the connection but i tried to open prot 69 and it didn't help
windows 10 home, thanks in advance
Hi Richard! You are a lifesaver. Thank you so much!!!
Hi, Richard. I know this question is a little off topic. But can you do a step by step video on how to port forward. I want to port forward my home video cameras. I had them port forwards before, but I had to hard reset my router and I lost my port forward setting. I do no the IP address, and port numbers to my cameras, but don't know to set them back up. Thanks. Like your videos on routers.
Thank you
I have tried many times
But nothing happened
And i got confused with the type of network cable
Is it a straight cable or cross one??
amazing man thank you very much it rescued my router big respect man
You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
My router is C60, I was trying to get back to stock from openWRT, But I bricked it there :(
Current Condition - Power LED lights up.
GUI based interfaces won’t,PuTTY won’t
Telnet won’tWinSCP can't.
I've followed every steps you mentioned, But there's nothing appearing on TFTPD screen :( , Please save me Sir.
Hi Richard. I've done my best to follow the instructions but nothing shows up in the log when booting up the router. Is there anything else I can do or did I screw up somewhere along the instructions? In any case, looking forward to your reply.
Update: i was able to see the log and load the file onto the router (i think) but then the router just keep booting on and off
Thanks! It worked perfectly also on MR 3420 v2
You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
missed the view log on the tftpd apart from that worked a charm.
Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
thank you very much from the bottom of my heart
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
I find your videos very informative. Thank you.
You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀