The shop is coming right along.. cant wait to see everything done,, the scorpion mods will definitely be a nice addition.. Keep up the cool content.. have a awesome rest of your weekend
So idk, personally i would define Matt as a professional welder👍 I don't know what anyone else is thinking but how many people use a welder to fabricate a urinal??!!?!!?🤔 Scorpion and it's surroundings are looking AWESOME👍👍
I've welded for years and weld between your Hollywood reference and how close you weld and welding upside down with a wire welder isn't bad I learned with a stick welder and on the farm we just burned through the paint and rust no time to grind things clean
Now that you've put some hours on the 44s, how would you rate your experience? How well or poorly did they hold up to 42s with the strongest shafts in the world?
I only had 40s on the 44s but they held up really well. Of all the wheeling I did all over the country the only breaks I had were 2 rear axle shafts, 1 rear ring and pinion chip. I replaced front ball joints once, the unit bearings twice, and the right rear wheel bearing. I’d say that’s not bad for the abuse I put them through.
Sheds coming together, what sort of weather protection are you going to put over the air compressor ? I have two 2hp air compressors into a tank about the size of yours, there cheaper and if one fails you just need $300 and change it out for another, don't expect to have any trouble but good to be prepared, I also have a third one, as spare or plug it in with the others, all the best to yous and your loved ones
People show up at Matt's shop after a long roadtrip and there like...I really got take a wizz man😒 Matt like, no problem but I gotta show you how to use it🤔 Bwahahah😂😂👍🍻👍👍🍻🍻👍😄😂
Oh man guys you didn't have to make them go all the way across, you could have shimmed each side at that same angle and wouldn't have lost any clearance and would still do exactly what you want it to do.
🕊🥰😘Fantastic🔥! * Now my core is burning indeed, but I'm Kimmy-jka.Monster not sure if the girls would have been equally excited of my performance like they were of Mel's😉!❤ And it's soo funny to see how much these overly playfuly girls actually kept of your attention 🤩
I’ve had that lower link mount dilemma myself and just lived with it..never thought of making them part of the skid. Man that shop is awesome!
🤘😎👍
New shop is AWESOME!
I remember the struggles of putting the first axles in, I forsee that lift putting in lots of work instead of your back.
Yes, it already has been a life saver!
You are the Mr. Rodgers of Wheeling..........
Shop is coming along nicely. Looking cooler and cooler each video.
The shop is coming right along.. cant wait to see everything done,, the scorpion mods will definitely be a nice addition.. Keep up the cool content.. have a awesome rest of your weekend
So nice to see you work out your new shop area.
Shop is turning out great. That is going to be so nice to work in. The Scorpion upgrades are rocking also. Should be fun.
Your world is going change with a new hoist, Congrats Matt!
So idk, personally i would define Matt as a professional welder👍
I don't know what anyone else is thinking but how many people use a welder to fabricate a urinal??!!?!!?🤔
Scorpion and it's surroundings are looking AWESOME👍👍
That urinal looks a whole lot better than my funnel in a pipe - thanks for the good idea.
Dear Bleeping, I love your clips, your work is really excellent
Sweet! I love that man cave John you built. Very unique!
Great job guys, just love that shop!
Loving the new shop! Giving me lots of great ideas!
Wow the shop is starting to look awesome!
You can feather your tacks with a grinder and your welds won't be high. Same thing we do when we put beads in pipe. We feather the starts and stops.
Those control arm skids are sweet!
I've welded for years and weld between your Hollywood reference and how close you weld and welding upside down with a wire welder isn't bad I learned with a stick welder and on the farm we just burned through the paint and rust no time to grind things clean
In all my years I’ve found the one and
only rule to fabrication welding is to be comfortable. 😃👍
Your going to love the rear steer the best mod you can do
Man that's one fancy shop....👍👍
For sure keep an eye & video footage on whats going as you're on the trail, maybe mount a camera under-near then play it back later
Wow nice too see cool work again
Good work all round Matt 👍👍👍👍
The Dr Pepper shot was hilarious
Great job love the shop
That's quite the pisser ya got there Matt plus the new shop and axle's.
Lovin those axles!!!
The bathroom is looking super
Should have a look at those plastic strips that hang down covering the doors when open.
Might wanna throw an exhaust fan in that ceiling.
Looks awesome 👌
That Dr Pepper was really glad to see you LOL
Now that you've put some hours on the 44s, how would you rate your experience? How well or poorly did they hold up to 42s with the strongest shafts in the world?
I only had 40s on the 44s but they held up really well. Of all the wheeling I did all over the country the only breaks I had were 2 rear axle shafts, 1 rear ring and pinion chip. I replaced front ball joints once, the unit bearings twice, and the right rear wheel bearing. I’d say that’s not bad for the abuse I put them through.
@@bleepinjeep and we all watched in amazement. Very impressive. Keep em coming and I dig your new shop 👍 gonna grab some merch soon
RUclips is paying Matt too much money if he can afford all this man-cave wizardy. 😜
Your bathroom is awesome
Sheds coming together, what sort of weather protection are you going to put over the air compressor ? I have two 2hp air compressors into a tank about the size of yours, there cheaper and if one fails you just need $300 and change it out for another, don't expect to have any trouble but good to be prepared, I also have a third one, as spare or plug it in with the others, all the best to yous and your loved ones
I might build a little shed around it, we’ll see.
Why not weld those "ramps" to the front and rear link brackets for extra strength?
because they are welded to the skid-plate and would not allow it to be removed!
@@donanders2110 Ah, thanks man! 😎
Grind down your tacks... or use tiny tacks. That way you wont see them when welding over them
How abut a piston from a moped for your top handle, Many years ago I filled one with body filler and when dried drilled the right size,
Plumb Bob Square Axle
Gotta be a Dr Pepper tap handle
Feather your tack it will tie in better
All that heat and ac and comfortableness….when you gonna start living in there!?
Saludo desde boston
Check it out! This has to be the COOLEST LS and body swapped RustOmod Wagon of all time! You'll love it! ruclips.net/video/fX4wIPUwzfo/видео.html
What do you film with? I’ve tried iphones, gopros, and a canon m50, but I feel like the sound of your videos is always so much more consistent
Why not fill the gap with thouse things and the control arm brackets with weld ?
Because they are part of the skid plate and then it couldn't be removed.
Why is aircraft going backwards? LOL
I've spent more on flap disks than welding wire 😆
I will miss the dana 44's
People show up at Matt's shop after a long roadtrip and there like...I really got take a wizz man😒
Matt like, no problem but I gotta show you how to use it🤔
Bwahahah😂😂👍🍻👍👍🍻🍻👍😄😂
Lol, and how to turn on the lights…. But that’s in the next episode!
@@bleepinjeep Matt's the goto for Jeep.
Ganassi, Stewart and the likes would have trouble competing w/him about that subject.
Just sayin'😄🍻👍
Your scorpion became a tank...iron every where
Now thats a sweet urinal lol.
Great work! Try grinding your racks with a cutoff wheel til they’re pretty thin. Easier to blend as you weld.
Do those Patagonia's actually work at Windrock when its wet?
I don’t know but we are gonna find out!
Nice man Cave urinal, That is funny but anyway good but anyway good video enjoyed it very much even though I'm a female
Cardboard Aided Design 😂😆
Why put a curve in the control arm "bridge/skids"?
Guess to minimize loss of ground clearance in the center between the links?
Correct
👍👊
Remember the #DrPepperIncidentof2022
Grinding your weld to make it look pretty makes you a Grinder not a Welder
Hey can I have your old axles??
Why didn’t you tack all that together pull it down and weld it on a table then weld it to the jeep?🤨
Can I have your old axles for my wj shit box please 🙏
Oh man guys you didn't have to make them go all the way across, you could have shimmed each side at that same angle and wouldn't have lost any clearance and would still do exactly what you want it to do.
Huh??
Sell me the Dana 44s I live in Oliver springs
Gorilla welding, ugly but strong!
I have a bud light tap handle. I’ll give you. Message me back.
🕊🥰😘Fantastic🔥! * Now my core is burning indeed, but I'm Kimmy-jka.Monster not sure if the girls would have been equally excited of my performance like they were of Mel's😉!❤ And it's soo funny to see how much these overly playfuly girls actually kept of your attention 🤩
Damn toilet looks confusing lol. So josh the new assistant to you? Dude needs to not be so camera shy and quiet.
Yes, I guess his title would be bleepinjeep certified mechanic, lol.
what's up with your eyebrows?
Sell me ur old axles
what do strippers and welders have in common??, they're constantly asking for more money and rod
U guys r not a jeep channel anymore sad