GoolRC ESC combo unboxing 45a ESC 4370kv ! will it survive ?
HTML-код
- Опубликовано: 10 сен 2024
- Desmeon - Hellcat [NCS Release]
Connect with NCS
• / nocopyrightsounds
• / nocopyrightsounds_
• / nocopyrightsounds
• / ncsounds
• spoti.fi/NCS
Desmeon
• / iamdesmeon
• / desmeon
• / iamdesmeon
• / iamdesmeon
#rccars #rc #x #traxxas #rchobby #rccar #rccrawler #rclife #wd #rcracing #radiocontrol #offroad #s #rcoffroad #rctrucks #tamiya #axial #prolineracing #arrma #rcdrift #rctruck #rccommunity #trx #rchobbies #losi #scalerc #axialracing #tinytrucks #scx #bhfyp
You have to gear these systems the same way you would a brushed motor! Stick a 19 tooth pinion on there or smaller with a high KV motor. The motor and ESC will run ALLOT cooler trust me. I did the same thing with my 3900kv motor and 60 amp ESC. They both stay nice an cool now. I'm actually running stock gearing on my Bandit (21/83) and Slash (16/90). Both cars will do about 35mph on 2S and the motors get hot but I can leave my finger on the motor for about 6 seconds. The ESC only gets warm.
14:00 the pony is having a blast rolling around
Skyrc TS120A sensored brushless esc combo with 10.5T motor.3s lipo. Will get 160kmh with activate advance timing system a.k.a turbo
Rcs are the best snake bait in those schetchy areas. 🐒👍🏽🇺🇸
I’ve got 2 of these esc, one is 45, 60 no problems with 3 s, You can get a program card 👍🏻
Nice bro I have a 60A but haven't used it tho is it powerful
45A esc can support 3s lipo?
@@mohdshafiqchekhalir6275 i just bought a 3s 11v rc battery and i have the same exact motor. It works really well my rc car does wheelies with it i got a duratrax evader
I really enjoyed watching this video. I'm getting ready to install the same Motor and ESC into my 1/10 scale Sunfire and this gives me excellent insight into what I can expect. Most likely I will just run on a 2s and maybe just do a quick speed run on 3s. The GoolRC setup is dirt cheap so I think it will be a good upgrade from the stock brushed motor that came with the car. Thanks for sharing your experience with us and taking the time to do temp checks on the electronics. Awesome stuff 💯👍
The fan probably cools that tiny heatsink in seconds by the time you take out the temp gun its already back below 70c.
Ya, I’d stick with 2 cell with that set up.
I'd thought about putting 4s in it just to watch it burn lol 🤣
J ai que du cogging avec ce combo , impossible de rouler la voiture , elle ne répond pas tout de suite à l accélération , c est du a quoi : gooulrc 3660 3100kv ?
Definitely wouldn’t try 3S, Pretty sure mine is a 60amp though it looks Exactly the same. It made my Rustler Scream.... Motor gets hot pretty quick with stock gears & Really Big Back tires that give me wheelies on demand. It’s worked for me for at least 3 years now, no problems. I don’t drive long but do max it out.
What kind of battery and capacity do you use for this esc?
Thanks alot if you can help me
Agus Wijaya 3s LiPo is max and you can use any capacity you want. The higher capacity the higher runtime
I have gone through 4 of them all were 60 amp!!!!!, they keep sending a replacement and I keep burning them up!!!!! It's a game now!!!!!
That's perfect 🤣🤣🤣
@@harro2395 even their 60A esc is not 3S minded. I need an ESC for my Redcat Volcano so I am going to try a RCruning 120A capable of 2-4 S
What KV motors do you use?
@@eminence55 right now a 4300 KV, I purchased a 120 amp ESC and not having any issues at all
What pinion did you change too?
I installed the same combo on a kyosho Fazer EP touring car 1/10...so strong for the plastic central shaft...very fast a 50% off throtle EPA
I keep original brushed gearing
Are these plug and play or does the ESC need to be programmed?
Would it be safe to assume that 3s would be less the problem than the pinion size?
Honestly I'm not entirely sure I run that pinion and motor on a 100amp ESC on 4s and they both never heat up I was trying to load the ESC up to make voltage spike above peak current it
Hobby Adventures I was just thinking that for people running a more modest gear it might actually be a good combo as long as it’s not pushed to hard. Just a thought.
Have a great day!
@@RCModSquad yeah you are right honestly I have just been told to avoid them so I figured I'd just push it to the limits and see how it reacted 😁
Hobby Adventures I totally get it. I’ve destroyed several ESC’s in cars running them on 3s even though I don’t think they were intended to run on 3s.
I think this combo might be good in a smaller car or with slower gears but at 45a I don’t think you can lean on it very hard.
I’m wondering if it might be good for something like the 959b, 979b or something in that class?
I might pick that up and see. I have a coupleof three wire servo’s that would fit the 959b. I think that would be a fair test. If won’t hold up to that with stock gears then I’d certainly steer people away.
Thanks for sharing and the idea. 💯👍🏻👍🏻
I have had 4 of these ESC's catch fire. But never had a problem with the goolrc motors. They seem good
The motor is actually solid I've run it on 4s as well hasn't missed a beat them ESC tho they are just terrible
Brad's Rcs I got 3 Goolrc esc 120amp no problem so far running on 4S
Hobby Adventures hi, do you think I’d have any problem running a 7.2v nimh battery with fires? I know that people say that the motors are good and the esc’s are bad, but they should be able to cope with nimh 7.2v?
@@R53.charlie it probably would be fine I still use mine on 3s and it still works but it does sometimes lose throttle input lol I'm not sure tho
@@R53.charlie I've run mine on 8.4volts no issues (after about 80+ runs). I'm gonna to try 9.6 volts soon.
I wonder why y'all have so many issues with your ESC's? On 4-in-1 drone ESC's we're getting 45A 6-cell ratings and they're generally pretty reliable even though we're running 4 at once! Perhaps it's to do with actually being in contact with a surface, so a rock, bump, or bad control input might cause a surge.
Ya different amp rewuirements
Or bad gearing as in this case.
4370kv is too much on 3s and that gearing. 2s is OK and fast enough. If you want to go 3s, either change to a lower gearing or to a lower kv motor like 3300kv. I use 3300kv motors and 2s which runs cool. Or 3s and limit the throttle digitally to 70% from transmitter. Fast enough to have great fun :-) and buggy still controllable.
I know but thank you for explaining everything for others to see
But I was trying to make it worst case scenario to see if it would catch fire like people said haha
It might have a temp that warns the esc of burning up
Hi, nice video,,, did u paint all these parts red? It looks nice ..
It will die even if you use 2s. THERE BRUSHLESS COMBOS ARE NOT CHEAP BY LUCK IT'S BECAUSE THEY ARE TRASH!!!!
Higher amps will solve many burn problems
So we have to guess the size of the motor? Why?
3660 or 540
Is that a 3s
Is this the on on amzone for 189
Mine worked fine, for like 3 seconds! Chinese junk
Esc was in heat protection.. when it stopped and started going in and out of protection..