Видео

nicely done!

I had same issue with rear brakes . But I finally figured it out. I put a vacuum pump on the bleeder and pulled the air out . Then I bleed the brakes and now I have perfect rear brakes.

Did this rear diff work in the long run? I am in the process of replacing my plastic gears with metal right now. I had the entire rear end out, and when I put all back togther the gears were very tight and wont spin by hand. Every video I have watched, nobody even checks how the gears mesh.

The motor spins freely in mine but the horn isn't moving (spline/horn is okay). Took the top part of the servo off, gears are intact, just no connection to the motor. Any ideas?

but 12429 is all gears metal

Definitely wouldn’t try 3S, Pretty sure mine is a 60amp though it looks Exactly the same. It made my Rustler Scream.... Motor gets hot pretty quick with stock gears & Really Big Back tires that give me wheelies on demand. It’s worked for me for at least 3 years now, no problems. I don’t drive long but do max it out.

always end with a drive video

OMG I got the exact same motor and put it into the same car and it broke in the same area I think those BL motor are trash .. I've managed to get a 7700kv motor on Amazon for £20

Your on soft mid riding slow. You don’t need a helmet for that.

thats not an exc.....

I don't get it... My set just turns on servo and motor and then turns off again? So the Servo doesn't hold positions and motor doesn't keep going

how many teeth dose the motor gear have i had a 30 and was pretty good but wanted more top end so i tryed a 26 teeth motor gear and it seems fast of the mark now lol so i think i need a 32 or 34 maybe ps the motor is 3300kv and 60amp esc also my buggy is the same HSP xstr

What happened with your servo? Was it new? I just bought that one hah

What's the model number

Lol

Where can I get that at

Man i think you should have moved the jumper ti LiPO before turning it on First time not in the midle of it

I have a Kyosho RC Surfer. Steering worked great for about 3 go outs. Saltwater surfing, but always rinsing with fresh water. Batteries all good. Propeller works fine. Just no steering. Would gears really be a problem?

I like the straps on the shocks idea. Reminds me I did that on a real car a long time ago, using u bolts to pre-compress the springs down and lower the 🚗.

When making electrical changes, unplug the battery!

I really enjoyed watching this video. I'm getting ready to install the same Motor and ESC into my 1/10 scale Sunfire and this gives me excellent insight into what I can expect. Most likely I will just run on a 2s and maybe just do a quick speed run on 3s. The GoolRC setup is dirt cheap so I think it will be a good upgrade from the stock brushed motor that came with the car. Thanks for sharing your experience with us and taking the time to do temp checks on the electronics. Awesome stuff 💯👍

A good video for us noobs to the hobby many thanks.

My dude pulled out a mechetie

Thanx for the video! I need help PLEASE. Brand new 959 that I got , but I cant control it. I switch on the radio and the LED blinks red and green. I switch on the car (Battery is full) and the ESC light just blinks. From there nothing happens at all. When I touch the remote , its LED will be constant green , but the ESC still flashes and no control over the car. ( I have left the car on and red-green flashing for minutes on end with no success) That am I doing wrong

Is that motor a f540 4370 ?

how did u fit the motor did it just bolt up or u got a mount for the conversion?

Video sucks

Is that a 3s

What pinion and spur gear did you use because they come factory like 3mm right? Not 5mm like that motor

Dude just want i am about to do but brushed motor. I hope fires did great your place. Love to come for vist

Can you use an SLA battery on the ESC

Can't you do it with out that part just drill moor holes in the existing engine mount

So I'm confused I had bought for 75 bucks what i originally thought was an hpi but upon posting in a hpi forum someone told me it was a kyosho dbx which it looked correct until I seen your video!! How and what are the differences between this and a dbx

is the part number hsp 68025 or hsp 68025A

Bro my 1/28 wltoys k969 has a servo problm , but its not dead but when i turn it its like lagging and stucking , how could i fix it :(

Oh ziptie😯 *grabs machete*

It would be nice to know what transmission you are using

U can make yr slider using delrin dude. Replace absorber point outside the chassis & u can get positif chamber.

cool vid! big like! 👍

What the model..?bruss

Hi, nice video,,, did u paint all these parts red? It looks nice ..

We buy these combo just plug and play ? Do i need to program or something els ?

amazing job you can share more details resized? my instagram to chat cdelgado_20 regards

did have to change any gearing mate

You sure that motor shaft wasn't made of glass? lmao

Dont you needed to configure it first???

J ai que du cogging avec ce combo , impossible de rouler la voiture , elle ne répond pas tout de suite à l accélération , c est du a quoi : gooulrc 3660 3100kv ?

It will die even if you use 2s. THERE BRUSHLESS COMBOS ARE NOT CHEAP BY LUCK IT'S BECAUSE THEY ARE TRASH!!!!

If the tires are not ballooning it’s not fast enough 💯💯💯🤦🏾🤷🏾🙅🏾🙅🏾. 120a esc only. I got two rc a erevo 1/16 brushless with 80a esc and a redcat blackout xbe pro 1/10 with upgrade 120a esc flying on 3s. Now with a 6s it’s a rocket 🚀

Goolrc and surpass hobby are the same company not sure y