Such a wonderful tutorial. I am a photographer but also print my own self-promotion items. This video has been very helpful. Love your presentation....very concise, informative and clearly videod. Love the smile. Thanks for everything and wishing the very best for you and your channel. 🙂
Girl!!!! I liked and subscribed just from watching the part where you taped the items to the butcher paper and then flipped over to sub. That is a huge time saver!!!!!! Thank You
I took a picture of the keychain shapes and then uploaded them into cricut then clean up around the shapes especially the hole. Once I upload them for design, I will flip the image just so I know which image will be on what side. Hopefully that tip will help.
Thank you for this class! I'm struggling doing my Keychains, I was putting less heat, I will try 400 degrees instead, and see if this works.... also I'm using a different program so I did learn something new with cricut with you, thanks alot !!!
You just saved me 2 key chains. I was ready to press them and decided to watch this video to get time and temp. And guess what. I totally forgot about the film on them. Thanks
Wahoo what a life-saving video this is. Honestly speaking, it's one of the best tutorial videos i have found on youtube. Going to subscribe to you. Pretty lady, you saved my life.
I've learned alot from just watching your videos but I was wondering do you have the width and height for the rectangle Keychain? I've tried so many times and it's either 2 big or 2 small
Thank you again for sharing your knowledge with us very clear and easy to follow directions thank you and if I could give you more than one thumbs up I would so you can get to 💯 K subscribers.
That's a tough question because it will depend on what types of keyrings you are planning to focus on. I really don't know a lot about being in business; but I would suggest starting with the types of keyrings you want to focus on.
I tried doing this it was a disaster, I did everything u did but every time it was time to print there was no pic there, I have no clue what I did wrong uggghhh so annoying gosh I staid up until 3 A.M & didn’t even get 1 done right, I give up, it was nice meeting u, I still subscribed but I’m done with circuit, sublimation ALL OF THIS CRAFTING STUFF
I had to laugh when you were looking for your Rockets image…”they’re all so plain”! 😂 Great tutorial and dang I want to try it so bad…a new printer just isn’t in the cards…YET! 😂🤪💕💕💕
Hi! My photos are coming out dark and yellowish orange looking like the older photos use to look. The colors (prints) when transferred onto the blanks aren’t bright and vivid. Am I doing something wrong? I’m using the same sublimation type of paper, and the sublimating ink is called Koala. I have a new set of sublimation ink called APRONE vivid and bright colors. I still have nearly a full tank of each color so it will be a while before I will need to add more. It does pretty good with other prints and wordings…it’s just photos I’m having issues with. 😢 Any pointers would be appreciated if possible. Thank you! 🥰
Thank you so much! This helped me make beautiful keychains. Having the sublimation print facing up when you tape it and then flipping everything over is genius. I've used this technique so much since I watched this a few months ago. No more wasting coaster and keychain blanks. You rock!
Hello, please advise, what am I doing wrong? All my acrylic pieces come out with bubbles in them. I have the same heat pressure you have. HELP, I am wasting so many pieces. I lighten the pressure
thank you for making this video. i couldn’t figure out why i couldn’t get them to work BUT you peeling the clear film off… i didn’t know that was there🤦🏻♀️
Can u please help me pls, why every time I go in my circuit maker when I upload my photo it come with the little black box at the top for me to clean it up but yours don’t, pls tell me what am I doing wrong pls, I would really appreciate it so much
Thank you you explained that so simply I bought that exact same kit and I’m having trouble with the way it’s printing on them it’s coming out with red faces
Hello , question do I always need to let dry on image after I print it ? I feel like I always just use it right away 🥴 maybe that’s why my image don’t look great 😳
I didn't know you had a facebook group that's exciting.. I love all your videos I am pretty new to cricut and sublimation but learning quickly with your help. Thanks for all of your help!
Loved the tutorial! I have this exact set and everything on one side looks great, but the back side has a big bubble now. I used 400 degrees at 60 seconds. Has this ever happened to you? Do you think the heat and time was too much?
I haven't had that happen with these. I would suggest making sure to remove the plastic from both sides, fold your butcher paper so, that's it's like two sheets instead of one, and perhaps go down to 385. I hope these suggestions work out for you.
@@sheilawilson6252 I adjusted the handle pressure on my heat press so it doesn't press down as hard and I also lowered the heat a tad bit and so far it seems to be working better. Hopefully this helps you as well!
Loveeeeee the video the tutorial was amazing I felt like I was listening to someone I know personally. That was easy to keep my attention that’s important for me. Some videos I’ve seen they just lose me they have too much going on in the video thank you for sharing I look forward to seeing more tutorials from your site. Be continually blessed 🥰😊
My suggestion is to check online retailers who sell similar products...like Etsy. I don't do sales and you should consider the time, materials, shipping, etc
Your keychains turned out lovely! Thank you for your easy to fellow video! I did have some discoloration when I subbed the backs of my blanks (not all.) I'm thinking I press too hard using my EasyPress & the heat tape might have discolored some of the photos because of pressure.
Delonda,. I also have an Epson printer the number of mine is 2720 and it's an ecotank. I bought the keychain blanks like what you have I use the same paper that you have my easy press goes to 400°. I did the same time that you did for 60 seconds and all of my keychains seem to have burned. Don't know how to do the settings on my Epson 2720 and I can't find anyone who knows. Can you tell me how to find the settings for my printer because that's got to be the only thing that's different from what you do. Please and thank you 💙🐰🐰🐰💙
Oh yeah I just got my keychain in the mail today so I’m looking forward to working on them when I go on vacation to the campground. 😁 I hope I can do these with the Cricut easy press.
Hi there, I'm not sure. There are chapters in the description below the video. Start at 18:58 I let the photos sit on the plate, and remove the plastic before I press.
Oh no 😢. What kind of paper and ink are you using? Also, did you let your photo sit under the heat press for about a minute to make sure there was no moisture in the ink?
Hi Delonda, I love watching your videos, I've learned so much from you 🥰 thank you for that. But I would like to ask you a question, why when you did the logo, you flattened it on the design space but not the fotos, is there a reason for that? I want to do fotos on Christmas ornaments, and want to make sure I don't mess up, so can you help me out? Thank you so much again 💓
I probably did that because the photo was already a print then cut image and the logo had layers. I would have to go back and watch it again; but this is my best guess. If you are using a photo it's already print then cut.
I love your videos and the content you put out. You have a great way to teach. The only thing is the distracting music in the background while you are talking. Can you maybe not have the music while you are talking? Thanks for the time you take to create all of this great content! Keep up the good work!!
This is probably a dumb question…. Do I have to use sublimation ink or can I use regular ink on the sublimation paper? I have an Epson 8550. I haven’t bought the paper yet, so I don’t know what the specs are. Just want to make sure before I purchase it and not be able to use it.
I did everything you did but my image won’t print mirrored please help. I turned mirror on in cricut design space and in the printer setting. It’s still printing without being mirrored
Wow it’s been 2 years?! I had to revisit this one since I haven’t done my keychains in awhile. I can’t believe you said trying to hit, what was it, a thousand? Delonda you’re doing so great! I’m glad I was with you in the beginning! God bless you and your family!
I am sure yours will be beautiful. Make sure to follow the recommended time and temp settings from the package that you purchase. Also, don't forget to remove the plastic on both sides.
Ok, I have ordered from 3 different vendors on Amazon. The ones I used in the video were good quality. I also like the ones I ordered from a vendor called Salifuy. They are good quality too, I just wanted a larger surface. The last package that I ordered was not too good and I am returning them. I will not mention the name of the company; but it is not the same as the name you ordered.
How to Calibrate your Cricut Explore Air 2: ruclips.net/video/53w3iIVAoA8/видео.html
Such a wonderful tutorial. I am a photographer but also print my own self-promotion items. This video has been very helpful. Love your presentation....very concise, informative and clearly videod. Love the smile. Thanks for everything and wishing the very best for you and your channel. 🙂
Thank you so much 😊
Girl!!!! I liked and subscribed just from watching the part where you taped the items to the butcher paper and then flipped over to sub. That is a huge time saver!!!!!! Thank You
I took a picture of the keychain shapes and then uploaded them into cricut then clean up around the shapes especially the hole. Once I upload them for design, I will flip the image just so I know which image will be on what side. Hopefully that tip will help.
Thank you for this class! I'm struggling doing my Keychains, I was putting less heat, I will try 400 degrees instead, and see if this works.... also I'm using a different program so I did learn something new with cricut with you, thanks alot !!!
You're welcome 😊
Thank you🤗. I understood your method of sublimation on keychains easier than other tutorials videos I watched. Great video 🤗
Thank you so much 💓
You are a beautiful soul! It's nice to learn together! :) Greetings from Grand Saline TX!!
Thank you so much ❤
You just saved me 2 key chains. I was ready to press them and decided to watch this video to get time and temp. And guess what. I totally forgot about the film on them. Thanks
Is sublimation printer the only way to do these? could you use a eco tank printer with sublimation paper
Wahoo what a life-saving video this is. Honestly speaking, it's one of the best tutorial videos i have found on youtube. Going to subscribe to you. Pretty lady, you saved my life.
Thank you so much and welcome aboard ❤️
How do I take the film off after I peel the clear tape off before pressing it has so much residue and stickiness left behind?
Hi Renee, I didn't have any stickiness left behind on the ones I used. Maybe use alcohol on a paper towel to wipe it off.
Love love love it……. The temp is in F and not C right? I have the same heat press….
List longer ✅ 🙈🤣
Yes, in F 😊. Thank you Angel 💙
Hi. Is it possible to sublimate these blanks using a sublimation oven? If so, how and which would be the parameters of time and temperature?
That's a great question, and it is something I haven't tried.
Great video. I like how you tape to the butcher paper. Great tip - it keeps the substrate from moving.
Thank you 😊
Thank you so much for making these videos. I am late to the game and just starting my Sublimation journey. Your beautiful in that wedding photo.
I've learned alot from just watching your videos but I was wondering do you have the width and height for the rectangle Keychain? I've tried so many times and it's either 2 big or 2 small
What size do you use for the reg keychains
I am having such a hard time lining them up,can i sublimate a pretty backround on it first the sub over the backround?
Oh no. I wouldn't suggest doing that. What are you having a hard time with?
Could one like myself just use my cricut heat press if I don't have a big turn table one? 😊
Absolutely
Thank you again for sharing your knowledge with us very clear and easy to follow directions thank you and if I could give you more than one thumbs up I would so you can get to 💯 K subscribers.
Miss Delonda my i ask a question where can I get butcher paper from besides online?
If you live in the United States, you can get a huge roll from Sam's club for about $25
I wonder could it be cause I’m on my iPad, this is so stressful when u can’t move forward
I totally understand! I call it hammer time! Are you able to connect from a desktop or laptop?
did u have to coat the blanks with anything b4 u applied picture, were they already coated or did you just start on the blank?
Hello would you have the design Cricut number for the heart 8:21
It should be the regular heart in the shapes panel.
Why noy tape the blanks to the sheet rather than cut and then tape individually. Extra step eliminated
There's more than one way to do just about everything. I chose to do it that way...thanks for sharing your idea.
I'm forwarding you to my cricut class ( other students)
Thank you so much ❤️
Could you do this in Canva as well?
Hello mam May I please ask what do I need to start a keyring business
That's a tough question because it will depend on what types of keyrings you are planning to focus on. I really don't know a lot about being in business; but I would suggest starting with the types of keyrings you want to focus on.
Awesome & thank you for a very detailed tutorial. Thank you.
Thank you so much ❤️
Can in use mini heatpress on sublimating keychains?
Absolutely!
When I do the other side the tape leaves an imprint does it with you?
Try taping the paper and not the image.
I tried doing this it was a disaster, I did everything u did but every time it was time to print there was no pic there, I have no clue what I did wrong uggghhh so annoying gosh I staid up until 3 A.M & didn’t even get 1 done right, I give up, it was nice meeting u, I still subscribed but I’m done with circuit, sublimation ALL OF THIS CRAFTING STUFF
Nooooooo! Are you in the FB group? Don’t quit.
I had to laugh when you were looking for your Rockets image…”they’re all so plain”! 😂 Great tutorial and dang I want to try it so bad…a new printer just isn’t in the cards…YET! 😂🤪💕💕💕
Yeah, I was like oh no! Not my Rockets 🥺. Thanks so much for watching and for your continued support. I truly appreciate you.💙
@@CraftingwithDelonda I appreciate your tutorials. 💕 You have to get back to vinyl and paper though LOL 😂
@@sharijohnson1873 yeah, it's probably going to be a balance between the two.
Hi! My photos are coming out dark and yellowish orange looking like the older photos use to look. The colors (prints) when transferred onto the blanks aren’t bright and vivid. Am I doing something wrong? I’m using the same sublimation type of paper, and the sublimating ink is called Koala. I have a new set of sublimation ink called APRONE vivid and bright colors. I still have nearly a full tank of each color so it will be a while before I will need to add more. It does pretty good with other prints and wordings…it’s just photos I’m having issues with. 😢 Any pointers would be appreciated if possible. Thank you! 🥰
Oh no! It might be your printer settings. Here are my settings BASIC SUBLIMATION PRINTER SETTINGS
ruclips.net/video/buglqee8My0/видео.html
LoL so I went to sublimate the keychain and forgot to remove the plastic.
Oh no! You have to remove it, or your heat press will definitely remind you!
@@CraftingwithDelonda It sure did remind me. LOL it was stinking so bad. I learned that day.🤣
Love this video she covered everything I should know
Thank you ❤
Thank you so much! This helped me make beautiful keychains. Having the sublimation print facing up when you tape it and then flipping everything over is genius. I've used this technique so much since I watched this a few months ago. No more wasting coaster and keychain blanks. You rock!
Do you use the same image you used for the other side or did you cut out a duplicate image for other side?
Hello, please advise, what am I doing wrong? All my acrylic pieces come out with bubbles in them. I have the same heat pressure you have. HELP, I am wasting so many pieces. I lighten the pressure
Did you remove the plastic from the blanks before pressing?
thank you for making this video. i couldn’t figure out why i couldn’t get them to work BUT you peeling the clear film off… i didn’t know that was there🤦🏻♀️
You're welcome!!
Let's try practically
??
@@CraftingwithDelonda I am new in sublimation business so today trying for keychain 1st time after seeing your video.
❤️❤️❤️
i love this keychain maker can you give a free download software thank you
Thank you ❤️
Can u please help me pls, why every time I go in my circuit maker when I upload my photo it come with the little black box at the top for me to clean it up but yours don’t, pls tell me what am I doing wrong pls, I would really appreciate it so much
Hi there, are you in the FB group? That is the best place to get help.
Very nice. I figured out how to do both sides at once. Takes a little more tape but, they don’t call me the queen of tape for nothing…😂😊 thanks.
Okay Queen!!! Own it, sis!
Hi what are the settings on your Epson printer?
Hi there, here they are ruclips.net/video/SttAUgEhCeE/видео.html
Thank you you explained that so simply I bought that exact same kit and I’m having trouble with the way it’s printing on them it’s coming out with red faces
Thank you and oh no! What is your time and temp? How much pressure? What heat press do you have?
Hi, would I be able to use my cricut heat press and my regular inkjet printer? Or do I have to change my printer to a sublimation one?
Hi there, you can use your regular printer to make this kind of keychains ruclips.net/video/DV3MT1DTjyo/видео.html
What program do you use to edit photos????
Google photos
Hello , question do I always need to let dry on image after I print it ? I feel like I always just use it right away 🥴 maybe that’s why my image don’t look great 😳
I always let mine dry for at least minute.
I didn't know you had a facebook group that's exciting.. I love all your videos I am pretty new to cricut and sublimation but learning quickly with your help. Thanks for all of your help!
You’re very welcome 😊
😍 I love this! The keychains are just so pretty Delonda!
Thanks! I love the way they came out. I would probably order bigger blanks next time.
Loved the tutorial! I have this exact set and everything on one side looks great, but the back side has a big bubble now. I used 400 degrees at 60 seconds. Has this ever happened to you? Do you think the heat and time was too much?
Kristin, mine is doing the exact same thing. I am so frustrated and wasting keychains!!
I haven't had that happen with these. I would suggest making sure to remove the plastic from both sides, fold your butcher paper so, that's it's like two sheets instead of one, and perhaps go down to 385. I hope these suggestions work out for you.
Hi Sheila, I am sorry to hear that. Please see the suggestions that I shared with Kristin.
@@sheilawilson6252 I adjusted the handle pressure on my heat press so it doesn't press down as hard and I also lowered the heat a tad bit and so far it seems to be working better. Hopefully this helps you as well!
I hope so too. I know it can be frustrating...trust me I have wasted so much stuff trying to get it right. Sending you positive energy 😊
Hi I’m new here, question? Did you save your pics as PNG? Is that necessary?
I’m pretty sure these images are pngs. It is necessary for your images to show up as print then cut before you click make it.
Loveeeeee the video the tutorial was amazing I felt like I was listening to someone I know personally. That was easy to keep my attention that’s important for me. Some videos I’ve seen they just lose me they have too much going on in the video thank you for sharing I look forward to seeing more tutorials from your site. Be continually blessed 🥰😊
Thank you so much ❤
How much I should charge for keychain?
What is the price for sale for pice?
My suggestion is to check online retailers who sell similar products...like Etsy. I don't do sales and you should consider the time, materials, shipping, etc
Your keychains turned out lovely! Thank you for your easy to fellow video! I did have some discoloration when I subbed the backs of my blanks (not all.) I'm thinking I press too hard using my EasyPress & the heat tape might have discolored some of the photos because of pressure.
Thank you! Are you using the Cricut brand of heat tape?
Can you use parchment paper?
I don’t recommend it.
Delonda,. I also have an Epson printer the number of mine is 2720 and it's an ecotank.
I bought the keychain blanks like what you have I use the same paper that you have my easy press goes to 400°. I did the same time that you did for 60 seconds and all of my keychains seem to have burned. Don't know how to do the settings on my Epson 2720 and I can't find anyone who knows. Can you tell me how to find the settings for my printer because that's got to be the only thing that's different from what you do. Please and thank you 💙🐰🐰🐰💙
Oh no B! Are you in my Facebook group? If you send me an email, I will respond with my settings.
@@CraftingwithDelonda I joined your Facebook group! 💙🐰💙
Wow!! These turned out great!
Thank you ❤️
Hi, I love the way you explain everything and show the setup on design space. I am definitely following you on RUclips and Facebook. Thank you, Monica
Thank you so much 😊
24:11 Thank you Delonda!👍🏼
I appreciate your kind words!
Could the same thing that you did with your big heat press be done with the easy press mini?
You just need a heat press that will reach 400 degrees.
Oh yeah I just got my keychain in the mail today so I’m looking forward to working on them when I go on vacation to the campground. 😁
I hope I can do these with the Cricut easy press.
Have fun! You can!
Those are gorgeous! Will definitely be making💜
I'm sure yours will be amazing as always ❤
Thank you for this! Quick question, what was the step when you flipped it over to sublimate pls?
Hi there, I'm not sure. There are chapters in the description below the video. Start at 18:58
I let the photos sit on the plate, and remove the plastic before I press.
This is such a helpful video. Thank you!! Trying keychains for the first time. Eeek! But this video is terrific.
Thank you! I really appreciate that ❤.
I have these exact ones ! Did the same time and temp , & it’s not turning out good at all
Oh no 😢. What kind of paper and ink are you using? Also, did you let your photo sit under the heat press for about a minute to make sure there was no moisture in the ink?
Thanks, just bought the same or very similar keychain blanks, this tutorial helps immensely
Thank you ❤️
Hi Delonda, I love watching your videos, I've learned so much from you 🥰 thank you for that. But I would like to ask you a question, why when you did the logo, you flattened it on the design space but not the fotos, is there a reason for that? I want to do fotos on Christmas ornaments, and want to make sure I don't mess up, so can you help me out? Thank you so much again 💓
I probably did that because the photo was already a print then cut image and the logo had layers. I would have to go back and watch it again; but this is my best guess. If you are using a photo it's already print then cut.
@@CraftingwithDelonda thank you so much for helping me, I understand now ❤️
I love your videos and the content you put out. You have a great way to teach. The only thing is the distracting music in the background while you are talking. Can you maybe not have the music while you are talking? Thanks for the time you take to create all of this great content! Keep up the good work!!
Thank you for the feedback! I will certainly reconsider the music 🎶.
I don’t have a heat press but i do have the cricut heat press can i use that one?
Absolutely!
This is probably a dumb question….
Do I have to use sublimation ink or can I use regular ink on the sublimation paper? I have an Epson 8550. I haven’t bought the paper yet, so I don’t know what the specs are. Just want to make sure before I purchase it and not be able to use it.
Not a dumb question. You would need sublimation paper because the ink has to be transferred to the paper with a heat source up to 400 degrees.
@@CraftingwithDelonda THANK YOU! By the way, started following you today. Sat and watched A LOT of your videos. Very informative!
Wow! Thank you so much 😊
Great job
Thank you!
I did everything you did but my image won’t print mirrored please help. I turned mirror on in cricut design space and in the printer setting. It’s still printing without being mirrored
Oh no!! I only mirror in my printer settings. I don't mirror in both places.
you are double mirroring. you need to mirror either on design space or the printer. not both.
THANK YOU!!! You helped me SO much with this video.
You are so welcome!
So you have to use the same picture on both sides or can you use different pictures
You can use different pictures. That's a great idea ❤
Hello… what is that large tweezers called?
They are called broad-tip tweezers and they only come in a set with the brayer.
Thank you for sharing. I love the easy to follow directions!
Thank you so much ❤️
Can this be done with regular ink on sub paper ?
I haven’t tried that but I have done photo keychains with printable vinyl.
Question why when i take off the clear has sticky blurry stuff on it before i put the picture or should it be fine
Hello, that is just the clear plastic that comes on top to protect the material before it is pressed.
@@CraftingwithDelonda ok good to knw i was wash it off now ik not to do that
This was real helpful and I had success in my sublimation
That is phenomenal!
Is butcher paper the only paper you can use?
It's the best option; but if you can't find any it would be okay to use white cardstock.
Thank you for making this video.. exactly what i need! 😊
That's awesome 💙
That is special for you to put her link up…. So awesome
Thank you 😊
Thanks for the shout out and for all that you do!!!
Thank you for being you and for inspiring me to get started!
I liked doing these on the sublimation and the phone cases!!!
I love it too! Thanks so much for watching!!!
Love your cool and comforting voice..
Hey there! Thank you very much 😊
I so love your spirit and personality
Thank you ❤️
Great tutorial thank you so much 😊
Thanks for watching!
Wow it’s been 2 years?! I had to revisit this one since I haven’t done my keychains in awhile. I can’t believe you said trying to hit, what was it, a thousand? Delonda you’re doing so great! I’m glad I was with you in the beginning! God bless you and your family!
Thank you very much for still being here.
New Subbie! Great tutorial
Thank you very much and welcome aboard 💙
Thank you!!! Thank you!!! Love this tutorial!!
You're welcome 😊
♥️
What's the size for rectangle?
The squares are 2.1 x 2.1
@@CraftingwithDelonda thank you
Just made a purchase and can't wait to see the outcome.
I am sure yours will be beautiful. Make sure to follow the recommended time and temp settings from the package that you purchase. Also, don't forget to remove the plastic on both sides.
Thanks! Not sure about pricing. Any suggestion would help.
Check the going rate on Etsy. I really don’t do sales like that.
Thanks awesome work
Thank you ❤️
Nice video. Great job
Thank you very much!
Hi, I made similar keychains and I'm having issues with chipping on the edge, do I need to seal them or try another brand?
Hey there! What brand did you use? Is there chipping on more than one?
@@CraftingwithDelonda Cruzix Sublimation Blanks from amazon.
One sec, let me check mine. I ordered several different packages and one of them was poor quality. I'll get back to you in a few minutes.
@@CraftingwithDelonda Thank you!!
Ok, I have ordered from 3 different vendors on Amazon. The ones I used in the video were good quality. I also like the ones I ordered from a vendor called Salifuy. They are good quality too, I just wanted a larger surface. The last package that I ordered was not too good and I am returning them. I will not mention the name of the company; but it is not the same as the name you ordered.
Absolutely beautiful❤
Thank you very much!
Very nice
Thanks!
Awesome 😍
Thank you 😊