Works devine, thank you, from a 63 year old woman who loves to ride, but needed a little more speed to keep up with the rural routes in North Attleborough, MA. I felt the need, the need for speed, lol.
Hey, I cut the cdi on my kymco agility 2009 scooter. And when it accelerate up to 40 km/h it jumps. Does this harm the motor? And is this because i havent change the boss yet? HELP!
Instead of destorying your CDI, just buy a performance CDI with a higher rev limit. It works great for my scooter. Please before you upgrade check what else might need an upgrading to prevent damage.
I just tried this and is fucking worked GREAT it went 54 km on the teller after the adjustment is now goes 62km on the meter. I stil need to get the smooth vario bus i bet it wil go 70km then. Acceleration everything improved. Wich ia great cause now it is decent to drive wile before it just couldnt handle city traffic. Thnx for this greetz from Holland
0.54min - Hey friend, what is the blue tape around the CDI? Does that protect water from getting into the connectors? I have this problem with signal relay and I can residue inside the connector but hard to remove it? I tried alcohol too.
Some body help me, i have a kymco dj50s its a 8 stick cdi. iorder a race cdi but its no start. Can l cut a wire somebody say. the waning wire do l cut. its a 2012 mod
Please help! I did this and destroy my scooter! :( Now scooter hiccough when I drive 10 km/h. When lights are on it hiccough at 20 km/h. What is the boss?
I have change my cdi to a racer cdi, and it goes in about 70 km/h on flat ground. This is without changing the boss. Is it possible that the restricted boss aleready is removed? Because of the speed it goes in, I havent change the boss and dont see why I should.
rather than cutting it tho it works the proper way only costs 35 pounds for a proper naruka racing unrestricted cdi unit with improved ignition mapping on it so advantage over just cutting it
Do you think its a risk to drive the scooter when I have cut the cdi, but still haven`t switch the boss? It really jumps alot when i drive it over 40 km/h. Thanks for answer
just got one for free wont start and owner "didnt know what was wrong". well after diagnosing no spark it led me to the cdi box. low and behold what do i find? a gapped cdi box.
de 45 je passe a 55 et plus ! Merci , on sent la reprise et le scoot qui se traine beaucoup moins. Mon model est un Cary de la Poste FR 2011, J'ai bien du couper un bon cm dans le CDI mais on voit le petit fil de cuivre, hop couper isoler rebrancher et c'est la patate
I`ve send a mail now. Because they dont send to norway. But think it will work out, but dont think I will switch to a bigger main jet, cause im really newb in this :(
before you cut/change cdi, you should check inside variator for restrictions on gliding tube. You change the tube and it will go 55 kmh, then you can first change or cut the CDI and it will go 70-90kmh. There is also a restriction ring on the air intake in your karburator, you can remove it but you will probably have to buy bigger jet to make it work right. also check airfilter, they often stuff allot of crap inside to block the airflow. Good luck.
Maybe no harm but rejetting or at least moving clip on main needle will richen the mixture. IMO the airbox should have a few 1/4" holes drilled in it to get a bit more air to the carb. More fuel plus more air and an engine derestricted to rev higher should provide a little more power and top speed. A smooth variator boss and lighter rollers is done to help the scooter get up to speed faster. Which to some extent it should do anyway since the mods aside from the variator should give a horsepower increase.
I have cut my cdi and it woked fine. later on i went on it and it was only going like 10 mph and then sometimes a huge load of power comes in and goes to 40mph, when i take my throttle down it goes back to 10mph and has like no power.. help??
@@115zombiehuger yeah right 55mph with a stock 50cc? No way dream on...or your speedomoter is crap measure it on gps..mostly you will get 42/43mph on a stock cilinder
I have a 2012 kymco like 50 and I did everything as explained in the video. now my skooter won't start. fuses keep blowing and it will turn over it just won't start. any advice?
000slipknot000 j'ai un 4 temps 2014... j'ose pas trop couper des trucs dessus le mien... il est encore tout neuf!!! Déjà j'fais 53~56 km/hr (moteur pas encore fini d'etre rodé). Dans les zones de 70, c'est vraiment pénible, vive la campagne... :S
they do this in the netherlands all the time to convert 25 kmh scooters intoo 45kmh scooters , they do use an aftermarket cdi , mount a bigger jet and i believe heavier rollers , if there is one they remove the plug inside the exhaust , and mount a smooth bushing , sumtimes you need to remove sumting from the top of the carburator so it can open fully the overreving is mostly from bushing ring still in there
I did this, and I got pulled over for 70 in a 55 mph zone. I told the cop but it's only a 49cc scooter. That made him inspect it. They found this modification and I got 6 months in jail. I'm out now and looking for you. Cheers
Xcrp12 When I asked the dealer to do this on my Agility they told me they can "try" but that they might ruin the bike and they wouldn't take responsibility for it if they did(thus the warning.).
what's the reasoning behind your assertion? How is spending 60 (60 what? 60 potatoes? 60 human brains?) on something and then waiting days for delivery preferable in comparison to the free option where results are not only free and similar in comparison, they are almost instantaneously achieved?
You RLY thought giving a wire some more air to breath that it all will go faster ? then you deserved to destroy it :D it like asking some one to put they're hands into water were steam is coming off.. 😆
Yeah perfect ...overrev youre engine and kill it👍 it doesnt do anything above 8000rpm the standard setting..more rpm is some more speed and revs up to 9500rpm and you shorten the lifespan of your engine rapidly
man, you'd better delete your video, it will be useful for people and for you. don't show something that doesn't work, and something that makes the whole engine crash after this procedure. really thank you for this video, that my engine screwed up due to the incorrect operation of the cdi and the whole electricity in general, that everything immediately overheated and screwed up. Odpri v Google Prevajalniku P
I don’t recommend you do this I tried it and my moped just turned off while riding and my cdi overheated or something, buy a unrestricted cdi online or just upgrade your cilinder
It works, 55 to 63 km/h, thank you bro🤚🏻
Works devine, thank you, from a 63 year old woman who loves to ride, but needed a little more speed to keep up with the rural routes in North Attleborough, MA. I felt the need, the need for speed, lol.
66 now are you still alive????
@@runnerCCskipperCC yes I am, ha ha and still riding to stores and appointments.
68 how about now?
@@aetwefgaargdv9179is dead lol😂🥲
Worked for my Agility Sport 50, Thanks bro ; )
To all those wary, i just tried this 30 minutes ago and took a ride, i can confirm this works with about 7mph+ boost without any other modifications.
What model do u have
Hey, I cut the cdi on my kymco agility 2009 scooter. And when it accelerate up to 40 km/h it jumps. Does this harm the motor? And is this because i havent change the boss yet?
HELP!
I did this with my own bike. without placing a different boss. runs smoothly
I have a Kymco k-pipe.
different setup then a agility
Instead of destorying your CDI, just buy a performance CDI with a higher rev limit. It works great for my scooter. Please before you upgrade check what else might need an upgrading to prevent damage.
I just tried this and is fucking worked GREAT it went 54 km on the teller after the adjustment is now goes 62km on the meter. I stil need to get the smooth vario bus i bet it wil go 70km then. Acceleration everything improved. Wich ia great cause now it is decent to drive wile before it just couldnt handle city traffic. Thnx for this greetz from Holland
0.54min - Hey friend, what is the blue tape around the CDI? Does that protect water from getting into the connectors?
I have this problem with signal relay and I can residue inside the connector but hard to remove it? I tried alcohol too.
Also, Kernow70, thank you very much!
I changed the cdi by my kymco agility 50 2007 its worked for me
Just did it on my scooter thanks:)
hello, does anyone know if this will work on the AC 50cc model?
question is that the same procedure on the Chinese scooter the cdi box looks the same, would it work on them
I have buy me a new racer cdi, and it works really good. But will it harm the motor when I haven`t change the boss? Needed answer
does this exist on the agility city 50cc 2014 model?
Some body help me, i have a kymco dj50s its a 8 stick cdi. iorder a race cdi but its no start. Can l cut a wire somebody say. the waning wire do l cut. its a 2012 mod
Any tips on not getting that thing stolen? Can you just click it out and take it with you?
Please help! I did this and destroy my scooter! :( Now scooter hiccough when I drive 10 km/h. When lights are on it hiccough at 20 km/h. What is the boss?
I have change my cdi to a racer cdi, and it goes in about 70 km/h on flat ground. This is without changing the boss. Is it possible that the restricted boss aleready is removed? Because of the speed it goes in, I havent change the boss and dont see why I should.
rather than cutting it tho it works the proper way only costs 35 pounds for a proper naruka racing unrestricted cdi unit with improved ignition mapping on it so advantage over just cutting it
just bought agility 50 kymco and looking for help information about it
@Kernow70 what year model is ur kymvo agility? and is it AC
Do you think its a risk to drive the scooter when I have cut the cdi, but still haven`t switch the boss? It really jumps alot when i drive it over 40 km/h. Thanks for answer
does this work for 2005 model? :) thanks
Found something now, thanks :)
what did you find out I’m struggling with mine??!!!
If you don't have a pink wire to my your scooter fast. What wire you cut
As you maybe noticed, I am really afraid I have cut the cdi to low and harm it..
does this work for the kymco agility 50 version 2006 too??!
How do i change the boss and where is it located? Can you send me a video on how to do it ? or just help me out please.
just got one for free wont start and owner "didnt know what was wrong". well after diagnosing no spark it led me to the cdi box. low and behold what do i find? a gapped cdi box.
troll don't doo that!!!!!!!
Can you do this on a icebear 50cc rocket
is it in the same place as the super 8?
Sori, it seems I can't place url up.
Okei, thanks :) But how do I get a boss? Cant find anything on ebay..
I doing that and now my bike goes 5-10 kmh up.
My CDI is 2011 model
Ciao ho un agility 50 16+ 4t 2019 e ho intenzione di modificare per velocizzare... quale CDI mi consigli di prendere?.. grazie
Worked on my 2013 kymco agility
Dave Peters 50cc 4T
Hoe kan je zien waar je moet zagen?
i cut into my cdi box now i have no spark??
why change the variator ?
I tried it and I still don't have much power in my Augliy 50
What now
de 45 je passe a 55 et plus !
Merci , on sent la reprise et le scoot qui se traine beaucoup moins.
Mon model est un Cary de la Poste FR 2011,
J'ai bien du couper un bon cm dans le CDI mais on voit le petit fil de cuivre, hop couper isoler rebrancher et c'est la patate
en fait y a juste a couper le boitier ?
Non, le fils est comme moulé dans le plastique, il suffit de faire une entaille de 4 ou 5 millimétres et ca suffit !
My scooter hiccough after cuting CDI. Is that normal cause I didn't put new boss yet? By the way, is this the boss I need to buy:
Please help me where is the boss located? and how do i change it? Please reply to me fast please.
Kernow - could you please post the number of your CDI? I want to make sure that I have the same one
I`ve send a mail now. Because they dont send to norway. But think it will work out, but dont think I will switch to a bigger main jet, cause im really newb in this :(
Work, i have 10kmh more of stock.. Nice job.
I can`t find anyone who send a kymco agility boss to norway. And can`t find someone that sell it here. Anyone that may help?
Only to kymco cdi box's. Or all cdi box's
work whit my agility 50 4t carry 2017. from 45km.h to 52 km.h
Does it work on a agility rs
This didnt work on my Kymco Vitality sport -08 ....There was no wire inside!
Didn't work for my mate, at best he got intermittant unlimited cdi and a weak spark. Picked up an adjustable unlimited unit for £18
have a kymco agility 50 cc trying to un retrict it done the cdi unit not sure what else you have to do can any body help thanks
before you cut/change cdi, you should check inside variator for restrictions on gliding tube. You change the tube and it will go 55 kmh, then you can first change or cut the CDI and it will go 70-90kmh. There is also a restriction ring on the air intake in your karburator, you can remove it but you will probably have to buy bigger jet to make it work right. also check airfilter, they often stuff allot of crap inside to block the airflow. Good luck.
Today I did cut the wire. Now it runs 70km. Before almost 60km. Iam happy
Awesome, me too, I am happy with the results
Did you change the boss etc or just cut the wire? What model do you have?
Me struggling to take the damn thing out lmao
FUK i think my cdi broke when i did this :O engine sound comes when starting but the engine just wont start and sparkplug works so it has to be cdi?
unde este limitatorul de viteze
The further you cut the faster she goes. Poooowwweeerrrrr
Thanks man
Cdi 2012 July got broken, it worked for 1 min. And then the scooter stopped.
what will happen if i don't do the first two steps an only cut the CDI?
Maybe no harm but rejetting or at least moving clip on main needle will richen the mixture. IMO the airbox should have a few 1/4" holes drilled in it to get a bit more air to the carb. More fuel plus more air and an engine derestricted to rev higher should provide a little more power and top speed. A smooth variator boss and lighter rollers is done to help the scooter get up to speed faster. Which to some extent it should do anyway since the mods aside from the variator should give a horsepower increase.
Xpro CDI match nhi raha h
Hi Do you think I could do the same to my Kymco 50 Mongoose ATV?
I have cut my cdi and it woked fine. later on i went on it and it was only going like 10 mph and then sometimes a huge load of power comes in and goes to 40mph, when i take my throttle down it goes back to 10mph and has like no power.. help??
Di che anno è lo scooter?
original cdi box is worth of 40euros when needed so i prefer to buy some DC(direct current)-cdi for you kymco agility gy6
if you living in finland reply me your e-mail, i can sell you brand new cdi for kymco agility or maybe other gy6 scooter?
Mine goes 30mph but i like to go about 45mph, will this get me there or do i have to fiddle with the carburetor?
owen98682 that's weird kymco bikes seem awfully slow my pulse is pushing 55mph on a flat bit of road and i haven't jetted it just rollers and cdi
@@115zombiehuger yeah right 55mph with a stock 50cc? No way dream on...or your speedomoter is crap measure it on gps..mostly you will get 42/43mph on a stock cilinder
on my lance pch 50 I have a kemco ID-411 cdi Is this a stock cdi?
yes
I literally cant find that cdi anywhere and I need to replace it
@Teun jw dw I found it.
I have a 2012 kymco like 50 and I did everything as explained in the video. now my skooter won't start. fuses keep blowing and it will turn over it just won't start. any advice?
It's dead, buy a racing cdi... if you have money xD
Thanks, now my scooter goes 0mph!
Je faisais un peu moins de 50km/h, grâce à ça j'en fais 55... c'est déjà mieux que rien !
000slipknot000 j'ai un 4 temps 2014... j'ose pas trop couper des trucs dessus le mien... il est encore tout neuf!!! Déjà j'fais 53~56 km/hr (moteur pas encore fini d'etre rodé). Dans les zones de 70, c'est vraiment pénible, vive la campagne... :S
they do this in the netherlands all the time to convert 25 kmh scooters intoo 45kmh scooters , they do use an aftermarket cdi , mount a bigger jet and i believe heavier rollers , if there is one they remove the plug inside the exhaust , and mount a smooth bushing , sumtimes you need to remove sumting from the top of the carburator so it can open fully
the overreving is mostly from bushing ring still in there
My uncle wants to know what the point of all this is.
i have a kymco super 8 50cc, would it be the same!?
Have any luck, and is yours 2t or 4t
Also what year model mines 2019
Got a smoked cdi..
It's is 2t
I did this, and I got pulled over for 70 in a 55 mph zone. I told the cop but it's only a 49cc scooter. That made him inspect it. They found this modification and I got 6 months in jail. I'm out now and looking for you. Cheers
@@aprixay4362 She was a scooter hater. They were trumped up charges. She was profiling. I think she was suffering from scooter envy.
@@aprixay4362 Already done. Twin Turbos pushing 30 lbs of boost. My wife says that's the way cops flirt.
🤣🤣🤣🤣🤣🤣 broooo
it does not work my kymco agility will not start after this shit :(
Xcrp12 When I asked the dealer to do this on my Agility they told me they can "try" but that they might ruin the bike and they wouldn't take responsibility for it if they did(thus the warning.).
Xcrp12 lel why would you do this just buy a cheap racing cdi
dont bother doing this, just pick up an unlocked sports cdi for about 60 and ur good to go
yupp
what's the reasoning behind your assertion? How is spending 60 (60 what? 60 potatoes? 60 human brains?) on something and then waiting days for delivery preferable in comparison to the free option where results are not only free and similar in comparison, they are almost instantaneously achieved?
Destroyed my CDI with this manual. Thanks for nothing...
You RLY thought giving a wire some more air to breath that it all will go faster ?
then you deserved to destroy it :D
it like asking some one to put they're hands into water were steam is coming off..
😆
Sorry folks, but maybe you cut to far in the cdi, because I just did mine and it works like a charm, I can go 40mph now.
Szikravan nemindul mihez nulúk
Coman pour démarrer Can ont n'a perdu les clés,et change le démarrer sur se sko
Eso q fue
☝️👌
tu gagne combien de km/h??
Tu gagne rien tu le casse si tu veux le debrider la seule possibilité et d'en acheter un déjà débridées
Dont try, to risky. Just buy a motoforce racing cdi!!!
2t or 4t
4t
thanks but no thanks. I'll just unplug the damn wire instead of cutting it XD
which wire did you unplug
@@mikkor2905 for me it was the bottom far left
👍
@@roynijmeijer4252 ok
is this a joke to destroy cdi of your Kymco..?
It actually derestricts the cdi allowing the bike to achieve a higher rpm
para q se hase eso al cdi
Cut off the terrible music
just cut the correct wire on the connector. you don't need to destroy a CDI
What wire? 07
@@alexberg2934 the pink one
u can’t do that on some cdi
Yeah perfect ...overrev youre engine and kill it👍 it doesnt do anything above 8000rpm the standard setting..more rpm is some more speed and revs up to 9500rpm and you shorten the lifespan of your engine rapidly
not if you instal a dopler preformance crank that does 18000rpm and also a 70cc cylinder:)
No music Damn it
man, you'd better delete your video, it will be useful for people and for you. don't show something that doesn't work, and something that makes the whole engine crash after this procedure.
really thank you for this video, that my engine screwed up due to the incorrect operation of the cdi and the whole electricity in general, that everything immediately overheated and screwed up.
Odpri v Google Prevajalniku
P
I don’t recommend you do this I tried it and my moped just turned off while riding and my cdi overheated or something, buy a unrestricted cdi online or just upgrade your cilinder
Espliquenme soy español