Changing the restricted boss and rollers of a Kymco Agility 50cc. This will increase your bike speed my 5-10mph. Check out my channel for more derestriction videos.
easy and well displayed video but tell us how manny gram the rollers and the inpakt it has i have a kymco super 8 only modified cdi(when i bought )it so 50 cc 6.5 gram vario rollers and drive 70 km a 65 when i got wind against me
What size rollers do I put in 50cc to make faster up hill its going 15 miles sometimes slower please help it was faster before I swapped the variator. Old variator kept destroying belt
Wont loctite just seal it so hard it will be hard to open again? And does the agility RS have the same parts? So this tutorial includes agility RS too?
blue loktite can be overcome easily enough by a bit more force. red loctite is supposed to require heat to remove altho ive broken red loctite by hand several times.
not necessarily, it just makes the work easier and quicker but you can also do it by hand, i did it with my old 2-stroke that uses the same drive system, and working without an impact wrench, will mean you have to buy a special tool to immobilize the starter wheel so you can apply the strength to undo it
Will this destroy your piston quickly? already de-restricted it from 28mph to 40mph with the CDI unit, after some googling seen this upgrade will make it do 48mph.
I derestricted mine and I sometimes see 45 already. Im waiting on putting this in with the a9 camshaft because my understanding is you need to upgrade the valve springs as I've heard someone blowing theirs to hell when they hit 50. I've already hit 50 momentarily with just the cdi and it didn't sound too good :edit valve springs not piston springs
@@joshkaylor3250 yes I bought a new one. I initially pulled the wire and then cooked my whole wire assembly dropping the wire to ground and to boot the wire cutting method didn't even work
checkout this link:www.virijavara.fi/kauppa/data/Variaattorirulla_koot.pdf this gives you the standard fitted size and weight of the rollers for your type of bike, the agility 50cc 4-stroke is fitted standard with 16x13 6,5 gram rollers
I kinda took this apart for no reason when I found out that it's a lathed edge, and not a loose ring. fuck. also I forgot to put the washer back behind the bolt. Should I put it back?
What weight of rollers are you suggesting? I have a Kymco 50cc Super 8 50x... I see that the smooth boss is a 38mm... I just need to know what weight of rollers. Thanks
Michelle Blau it depends what you are trying to achieve m, fast takeoff or faster overall speed. Lighter I better for faster takeoff but for a more reliable and faster speed heavier is better
this must be how my jonway 50cc is restricted... thx for the vid, Ive been looking for this info.
Hey mate great video, are you able to provide links to where you ordered the parts from?
where do you find the 10 screw like the smallest one?
Or What is the optimal deristricted roller weight?
Thank you!
I had to watch this on mute so I wouldn't start screaming
:D :D :D
Which weight rollers did you go with and top speed?
easy and well displayed video but tell us how manny gram the rollers and the inpakt it has
i have a kymco super 8 only modified cdi(when i bought )it so 50 cc 6.5 gram vario rollers and drive 70 km a 65 when i got wind against me
What do the grounds of drive rounds
Good god this music is killing me
Dude I was about to comment the same f*cking thing when I saw your comment. Terrible track selection, lol. MUTE.
It sucks. Not worth watching his video
@Nasir Ameer no one does give a shit so stfu.
So what does replacing these parts do to the scooter?
Did you change the variation or did you just clean it?
U have the link to buy the rollers
what torque power for putting the nut back on at 5:10.....and I'll not mention the music...lol.
Kymco new like II 50i??? same ???
What size rollers do I put in 50cc to make faster up hill its going 15 miles sometimes slower please help it was faster before I swapped the variator. Old variator kept destroying belt
how much increase your speed on your scooter ?
Hizli gitmesi icin nekadar ağırlık takmamış lazim ?
Wont loctite just seal it so hard it will be hard to open again? And does the agility RS have the same parts? So this tutorial includes agility RS too?
blue loktite can be overcome easily enough by a bit more force. red loctite is supposed to require heat to remove altho ive broken red loctite by hand several times.
Hi, what is the size for the tool used to remove the casing at the start of the video? Can anyone help
Joe Ceppetelli 8
where is the pipe 0:50 connected? i haven't such a pipe attached at this casing.
It's just an air inlet for the fan in the CVT housing.
Is there a link to where you bought the new parts from?
AliExpress
what is it with the restriction boss does he replace it? pulls it out of nowhere?
mitchel asscheman he pulled it out of his ass
When he removed the variator he also removed the boss
كيفية نزع الروداج kymco agility 50c fr
Do you have to use an impact gun ?
not necessarily, it just makes the work easier and quicker but you can also do it by hand, i did it with my old 2-stroke that uses the same drive system, and working without an impact wrench, will mean you have to buy a special tool to immobilize the starter wheel so you can apply the strength to undo it
What does the rollers weight?
7g
what size and weight are the rollers, i have the exact same bike, even down to the colour are they 15x12,or 16x13? or 18x15?
Colin Shard 16×13
What size were those new Rollers?
7.0g
how mutch grams is it
Got the same question
Did you do anything with the cdi?
Have you even watched his channel
better loctite it than the variator flying off whilst riding
Will this destroy your piston quickly? already de-restricted it from 28mph to 40mph with the CDI unit, after some googling seen this upgrade will make it do 48mph.
I derestricted mine and I sometimes see 45 already. Im waiting on putting this in with the a9 camshaft because my understanding is you need to upgrade the valve springs as I've heard someone blowing theirs to hell when they hit 50. I've already hit 50 momentarily with just the cdi and it didn't sound too good
:edit valve springs not piston springs
@@joshkaylor3250 yes I bought a new one. I initially pulled the wire and then cooked my whole wire assembly dropping the wire to ground and to boot the wire cutting method didn't even work
Do you have the new agility 50
And how do you de restrict it with the cdi I can’t seem to find the small black box and I have the 2018 kymco agility
john papajohn f
whats the reference of the rollers ?
checkout this link:www.virijavara.fi/kauppa/data/Variaattorirulla_koot.pdf
this gives you the standard fitted size and weight of the rollers for your type of bike, the agility 50cc 4-stroke is fitted standard with 16x13 6,5 gram rollers
Kymco Agilitiy 50 CC Variator Rollers Weights How many grams help please
Standard rolls are 6.5 grams. For a higher maximum speed 7-7.5 grams are recommended
I kinda took this apart for no reason when I found out that it's a lathed edge, and not a loose ring. fuck. also I forgot to put the washer back behind the bolt. Should I put it back?
Hi nice video however never put lock tight on crankshaft!
does this also work on a kymco agillity 50 16+
6.3 grams
What about Kymco II Like 50i (the new kymco like)????
Is the boss 37 mm or 38 mm?
Claudio Rebeiro 38mm
daand12 Thanks
I barley got to 1:07 didn't realize i was on a radio channel shit I was looking for info
Why is the impact gun so important? I'm sure it can be done without it
Bcs if u do it wrong without you will easily break the moped
I'm trying to do it this min with. A socket got no chance
V/10 A/.007 Hit mute at the beginning of this or .... trust me just hit mute and read through it for a happier life ;)
What weight of rollers are you suggesting? I have a Kymco 50cc Super 8 50x... I see that the smooth boss is a 38mm... I just need to know what weight of rollers.
Thanks
Michelle Blau it depends what you are trying to achieve m, fast takeoff or faster overall speed. Lighter I better for faster takeoff but for a more reliable and faster speed heavier is better
this is the kind of music scooter people listen to
no just this guy
Glad my mute button works...
Good video-----horrible choice of music!
@Jose Alexander LOL!
Where in the H did you get the horrible background noise. PLEEAASSE eliminate it.
Wtf is going on with his music...I cannot make it through the video!!!
My God this music is absolutely fuckin awful. I hope the video is informative.
They gay night club music….
This is the most annoying music to listen to