I'm strongly considering a set of these foams inside a set of J concepts Hold tires on my Gen 8v2. A lot of the rocks here in my area are covered with moss, dirt or mud and it seems like a good combo. Thank you for taking the time to do the blue and the reds!
Hey thanks for the feedback! I like them both but for the Gen 8 especially I prefer the blues over the reds. I have more on order as I liked them that much to use in other tires on different trucks. Check back and let us know if you try them what size and how they worked for you 👍
I have the blues with a set of km2 knock offs on aluminum bead locks. Works really well on my gen8 v2. I do have some brass portal covers and 8mm brass hex extensions. The blue center works perfectly in wet or dry rocks and light mud.
Great video. I watched the video where you introduced these tires and just ordered a set. There are many different sellers on Amazon that sell this particular tire and the cost is still less than $30. With that being said, I have a set of the Pro-line KM3 tires but in the G8 compound. I am running the Pro-line single stage closed-cell foams. I have ran the dual stage in the past but the outer foam becomes a sponge if any water gets inside the tires. I am very happy with the single stage foams. There is enough room inside the tire to still create a realistic "bulge" at the point of contact with a rock surface and allow the tire to grab as it should. I am not knocking the dual stage type foams; just reminding folks that the single stage foams can be a good option.😀
I have been testing the injore red rubber tpu inners with a medium hair bun as the outer. Never going to a open cell foam in duel stage again. The upper side and edge grip is insanely good.
I used them in the Louise Rowdy. In those Tires the Foams ahve to much movement to the Sides and it sometime looks Ugly. I think they are better in a Smal Tire mabey max around 42mm the Rowdys have 49mm.
It's been 5 months. How about an update on these foams now that they are fully broke in. Most foams I've used need 3-4 runs before they really start to work as intended.
Hey buddy nice info vid. I just ordered the Injora 2 Stage foams at Ebay from the Injora store...Injora has good products I've been buying them for my rigs. Btw I got the red ones, what's the difference between this and the blue ones since you made videos with each of them. Thanks
I personally like the blues better. The red is a solid rubber inner ring and the blue is a contoured closed cell foam. They both are better than most cheap single stage. Enjoy the testing👍
The red is in reality rubber rather than foam. Personally I prefer the blues as they are true 2 stage foam, soft outer and dense blue inner. With the reds the outer is extremely soft and inner red is rubber, one advantage of the red could be they are heavy?
These would be way too big for the tires that come with the 136100 unfortunately. The RGT stock tire is a strange one…….close to a 4” tire on a 1.9” wheel, along the lines of a class 1 size. However they do make a ton of different sizes for these under a half dozen different LLC brand names on many websites. If you can find them in the appropriate size then yes……i think they would be great in the RGT. In fact if you do find them lmk so I can order for mine as well! Check out our RGT footage too 👍
@@SonoranScaleStudios There is an option injora dual stage foam with 100mm (outside diameter). 136100v3’s tire has 100mm too. Which should be better for my rgt? Blue or red version?
I'm strongly considering a set of these foams inside a set of J concepts Hold tires on my Gen 8v2. A lot of the rocks here in my area are covered with moss, dirt or mud and it seems like a good combo. Thank you for taking the time to do the blue and the reds!
Hey thanks for the feedback! I like them both but for the Gen 8 especially I prefer the blues over the reds. I have more on order as I liked them that much to use in other tires on different trucks. Check back and let us know if you try them what size and how they worked for you 👍
@Sonoran Scale Studios Will do thanks for the great content!
I have the blues with a set of km2 knock offs on aluminum bead locks. Works really well on my gen8 v2. I do have some brass portal covers and 8mm brass hex extensions. The blue center works perfectly in wet or dry rocks and light mud.
for heavy body red or blue ? thanks
Personally I’ll take the blue. The inner is stiff but they help keep the tire from deforming and look pretty real.
Great video. I watched the video where you introduced these tires and just ordered a set. There are many different sellers on Amazon that sell this particular tire and the cost is still less than $30. With that being said, I have a set of the Pro-line KM3 tires but in the G8 compound. I am running the Pro-line single stage closed-cell foams. I have ran the dual stage in the past but the outer foam becomes a sponge if any water gets inside the tires. I am very happy with the single stage foams. There is enough room inside the tire to still create a realistic "bulge" at the point of contact with a rock surface and allow the tire to grab as it should. I am not knocking the dual stage type foams; just reminding folks that the single stage foams can be a good option.😀
Yup, I'm running them with the Injora beadlocks and Jconcepts Ruptures, they're working out pretty good!
They’re a lot better than I expected. I think they’re going into most of my rigs now. Did you order the ruptures? I’ve been unable to source locally
@@SonoranScaleStudios I was able to find them at a local hobby shop called Superstition Hobbies, they're located in Queen Creek AZ!
I have been testing the injore red rubber tpu inners with a medium hair bun as the outer. Never going to a open cell foam in duel stage again. The upper side and edge grip is insanely good.
That’s a cool combo 👍 hair buns in the right size sure can be some of the best, nice idea to make into a 2 stage. Thanks for sharing!
What is a hair bun? A hair net?
@@72twist it's a donut looking ring made out of a plastic open mesh cell material
What size is the medium hair bun please?
Thank you 👍
I used them in the Louise Rowdy. In those Tires the Foams ahve to much movement to the Sides and it sometime looks Ugly. I think they are better in a Smal Tire mabey max around 42mm the Rowdys have 49mm.
It's been 5 months. How about an update on these foams now that they are fully broke in. Most foams I've used need 3-4 runs before they really start to work as intended.
Waiting on your new secret danchee video 👀
Literally working on the trucks last changes at this moment before finishing up some run footage. Some new hardware and huge rubber. Love this truck 👍
@@SonoranScaleStudios Can't wait!
Hey buddy nice info vid. I just ordered the Injora 2 Stage foams at Ebay from the Injora store...Injora has good products I've been buying them for my rigs.
Btw I got the red ones, what's the difference between this and the blue ones since you made videos with each of them.
Thanks
I personally like the blues better. The red is a solid rubber inner ring and the blue is a contoured closed cell foam. They both are better than most cheap single stage. Enjoy the testing👍
What's the difference between the red and blue injoras? Softer, harder foam?
The red is in reality rubber rather than foam. Personally I prefer the blues as they are true 2 stage foam, soft outer and dense blue inner. With the reds the outer is extremely soft and inner red is rubber, one advantage of the red could be they are heavy?
Where can I find the tires?
I own a rgt 136100v3. I’m considering a Set of these foams inside of original tires. What do you think?
These would be way too big for the tires that come with the 136100 unfortunately. The RGT stock tire is a strange one…….close to a 4” tire on a 1.9” wheel, along the lines of a class 1 size. However they do make a ton of different sizes for these under a half dozen different LLC brand names on many websites. If you can find them in the appropriate size then yes……i think they would be great in the RGT. In fact if you do find them lmk so I can order for mine as well! Check out our RGT footage too 👍
@@SonoranScaleStudios
There is an option injora dual stage foam with 100mm (outside diameter). 136100v3’s tire has 100mm too.
Which should be better for my rgt? Blue or red version?
Except these are not Injora
My Injoras look totally different in dimensions…
👍👍😁😁
These are timtin not injora...