You guys have created exactly what I need. Have mustang seats sitting to the side and have been trying to make mounting brackets. This is perfect, will 100% be ordering a set of these. 👍🏾
I made mine out of a bunk bed frame the neighbors threw out, welded them together once level and used the old brackets on the 40/20/40 93' seats for adjustment. Went on Car ID and bought some black and tan Covers. Fancy Dirty old man Truck!. ;)
Great video. I've been trying to figure out how to put 2000 Ford mustang seeds into my 1995 Ford F-150 XL. If you guys sold brackets for that I would totally buy it.
You'll find this to be funny. I recently bought a 1969 Ford F350 27 foot Vista Liner Olympus C Class Motorhome, for my husband's Christmas/birthday, and it only has 35,000 miles on it,. So yes,...it has a hole cut in the back of the cab, and Ford included a pair of (pure white Wimbledon white )bucket seats, that are in perfect condition. The funny part? I'm probably the only one the has factory installed buckets for my F350,...so you not in danger of losing any customers over this! However, you can say, that you know for a fact, that Ford did install buckets in an "F" series bumpside,...from the factory! I think there were three overall in 69, and at least one of them is long gone. Guess what!? In 1969 Ford used larger trucks, ( like the F350 390 Fe) to do research on high performance products, ( such as carburetors, intakes, etc,...) At least, that's what Ford told my husband, when he called to find out why three two barrels were included on the build sheet he found in the truck! Thanks for listening, we'll subscribe immediately! Merry Christmas dear, and I loved your video.
That truck look's awesome I have a 1977 .By the way I'm looking for the rear window wide chrome just like the one on your video do you know where I could get one in mint condition or new ?
Hey Jason, I'm wondering if the mustang seats give you any more leg room than the bench seat. Us tall guys aren't exactly comfortable in these older trucks. Good video! Keep them coming 😎
I hear you,,,hard to get any leg room in older trucks,,, l built a 45 dodge pickup and had to use a 3 seat option from a mini van to have enough,,,I'm building a 66 ford pickup and used bucket seats and I hate the leg room,, expecially with a clutch for manual transmission
@@FatFenderGarage the holes 🕳 for the 3/8-16 🔩, to mount to the cab floor are smaller than 3/8. I sent images to info@gmail.com. They don’t seem to be drilled to the correct diameter.
I like it except for cutting down the seat backs. Lots of torque in that beautiful beast gonna be tossing your coconut around and slamming the back window.
Love any 73-79 truck content keep up the awesome vids!
You guys would make a KILLING making these brackets for the Areonose F-150s. (1992-1996 Single Cabs) I'd for sure buy a set.
Me as well!
You guys have created exactly what I need. Have mustang seats sitting to the side and have been trying to make mounting brackets. This is perfect, will 100% be ordering a set of these. 👍🏾
I saw some one selling a 1980 ford truck in Phoenix and they installed 2013 mustang seats and the dashboard as well very cool what you guys do
Do you guys have much experience upgrading these older trucks from a lap belt to a 3point? I would love to see something about that with tips/tricks.
I made mine out of a bunk bed frame the neighbors threw out, welded them together once level and used the old brackets on the 40/20/40 93' seats for adjustment. Went on Car ID and bought some black and tan Covers. Fancy Dirty old man Truck!. ;)
im sitting on a deer stand watching youtube.
That's dedication!
Freezing your ass. Nope. Not for me......and shooting Bambi. LOL.
uhuuuu I like your work I am in Africa re building my F100 I
will send video when I am done supper work good go a head
Great video. I've been trying to figure out how to put 2000 Ford mustang seeds into my 1995 Ford F-150 XL. If you guys sold brackets for that I would totally buy it.
I'd love something like this for my 1997 f150. Any chance you guys plan on making them?
You'll find this to be funny.
I recently bought a 1969 Ford F350 27 foot Vista Liner Olympus C Class Motorhome, for my husband's Christmas/birthday, and it only has 35,000 miles on it,.
So yes,...it has a hole cut in the back of the cab, and Ford included a pair of (pure white Wimbledon white )bucket seats, that are in perfect condition.
The funny part?
I'm probably the only one the has factory installed buckets for my F350,...so you not in danger of losing any customers over this!
However, you can say, that you know for a fact, that Ford did install buckets in an "F" series bumpside,...from the factory!
I think there were three overall in 69, and at least one of them is long gone.
Guess what!?
In 1969 Ford used larger trucks, ( like the F350 390 Fe) to do research on high performance products, ( such as carburetors, intakes, etc,...)
At least, that's what Ford told my husband, when he called to find out why three two barrels were included on the build sheet he found in the truck!
Thanks for listening, we'll subscribe immediately!
Merry Christmas dear, and I loved your video.
That truck look's awesome I have a 1977 .By the way I'm looking for the rear window wide chrome just like the one on your video do you know where I could get one in mint condition or new ?
Could you let us know, what’s the console out of?
What year seats are those, did the seats have air bags and how do you handle that...
What about that console...
Good job
Good stuff Jason. Ready for Tanner to hand mine off to you.
Yes sir. I’ve got the guys ready as soon as Tanner is.
Will this work in the 78/79 bronco?
Hey Jason, I'm wondering if the mustang seats give you any more leg room than the bench seat. Us tall guys aren't exactly comfortable in these older trucks. Good video! Keep them coming 😎
I put Mustang seats in my '62. There is no extra room. To have extra room, the seat would have to be thinner front to back. They aren't.
I hear you,,,hard to get any leg room in older trucks,,, l built a 45 dodge pickup and had to use a 3 seat option from a mini van to have enough,,,I'm building a 66 ford pickup and used bucket seats and I hate the leg room,, expecially with a clutch for manual transmission
I got some 99 mustang seats laying around if I buy those brakets will they bolt up too that bracket too??
How much for the center console? Can you build one for a manual transmission and 4 wheel drive?
Cost varies depending on a bunch of factors. If you want a custom one, hit us up at info@fatfendergarage.com
@@FatFenderGarage where did you get the seats and console
Will this bracket work for a 1993 f150 I want to put my foxbody seats in it
Need some for a 2002 F 150
Do these brackets only work for the s550 seats only, or do they work with s197 seats as well?
If there are old junkyards around you can take the brackets out of late Broncos or Vans.
How did you hook up the power to these seats?
Not to be left out... What would you all recommend for a 55 F100. Would something similar work?
We have a kit for a 53-56 coming soon
Do you make brackets for a 1962 F100 Unibody?
What console is that? Mustang or something else ?
how about the console any details on it?
We made it here in house. Our upholstery team can hook you up if you want.
Where u guys located
Very nice!!!
Does this work for a 1966 Ford F100? Thanks
How much for a set for a 1994. Ford Bronco?
Can you do a swap on a 95 ford f150 4.9?
So I just received my brackets and doesn’t look like my holes on any of the plates were drilled out to the correct diameter for the bolts. Any help? 🤨
What seats are you using. Also take plastic parts off too.
@@FatFenderGarage the holes 🕳 for the 3/8-16 🔩, to mount to the cab floor are smaller than 3/8. I sent images to info@gmail.com. They don’t seem to be drilled to the correct diameter.
Hey does this work with f150 seats as well or are they a different set up??
Works with F150.
That truck is still being worked on? I thought it was completely done long time ago?
It’s done. Client has been driving it. Old video.
Slow to get the part finished for retail.
Fat Fender Garage gotcha..., That’s my favorite trucks btw that you guys have built so far!
What door panels are in that truck?
Nice but I would prefer something in high back.
Price for this seats?
1:17 you have a white truck up on stands??? What are those & who makes them??
Those wooden stands? We just make em here at the shop.
Wait a second! can I get a video just on the door panels?
Are those factory door panels
We made them in house! We sell the same ones on our website. fatfender.com/products/custom-made-1973-1979-ford-truck-door-panels
Someone needs to make a kit to square up the steering column coming out of the dash.
"its a part we made" this needs to go somewhere maybe merch idk
Surprise surprise 😂
Are those custom door panels?
They are. You can customize them however you want. We sell them here: www.fatfendergarage.com/product/custom-made-1973-1979-ford-truck-door-panels/
How about the 66 F100 ? Should be the same?
Not sure, haven't tested it
Problem with putting seats in older trucks is having leg room
I have the same project do you fabricate parts ?
To sell*
Send us an email with more info and we can help you out. max@fatfender.com
Will that bracket work on a 54 f100 also
We have those coming out soon also.
Okay I'll be on the lookout is this something rhat will be added to the website or do i have to call in for this type of order
Website added.
For sale
I like it except for cutting down the seat backs. Lots of torque in that beautiful beast gonna be tossing your coconut around and slamming the back window.
It’s better than a bench seat. And it’s fine, works well.