I have been doing my best to complete the labs on my own, but sometimes just hit a brick wall. You have been a life saver! Thank you so much for these videos!
You are such a great teacher ! I enjoy how you explain the process . I watch your videos for my packet tracers and i leave feeling much more confident and knowledgeable
Another great and very helpful instructional video. Whoever hit the "thumbs down" button is an idiot. These are great videos and you are an excellent teacher.
How you are coping the ipv6address from the packet tracer and pasting in PC s ipv6 ...I am unable to copy and paste ..can you tell the command that you're using at 3:37
Actually I worked with old packet tracer and it was possible to copy the address from the activity window. Now in the new version 8.0 and above, it is not allowing to copy any text/address. Thanks for your great support and sharing my dear friend!
For the question "What filtering command would you use to display only the interfaces with addresses assigned?" The answer is: show ip int brief | include up The result is: R2#show ip int brief | include up GigabitEthernet0/0/0 10.0.4.1 YES manual up up GigabitEthernet0/0/1 10.0.5.1 YES manual up up Serial0/1/0 10.0.3.2 YES manual up up Serial0/1/1 209.165.200.225 YES manual up up
What’s interesting is that the up/up status doesn’t have IPv4 addresses all I see is we configure IPv6 addresses and prefixes with serial port and gigabit Ethernet ports. Do you know we can’t we configure the IPv4 address?
hello, great video, i have a problem understanding when is the "cisco" password for vty used? ( it says " Assign cisco as the vty password") since we just use username and password SSHadmin and 55Hadm!n when connecting in ssh.
21:01 C:\>ping 2001:db8:acad:5::10 Pinging 2001:db8:acad:5::10 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 2001:DB8:ACAD:5::10: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\> this is what mine said.
I have been doing my best to complete the labs on my own, but sometimes just hit a brick wall. You have been a life saver! Thank you so much for these videos!
Great to hear!
You are such a great teacher ! I enjoy how you explain the process . I watch your videos for my packet tracers and i leave feeling much more confident and knowledgeable
You are so welcome!
I JUST LIKE ALL YOUR VIDEOS BECAUSE YOU HELPED ME THE ONE TIME I WAS DESPERATE
Glad it helped!
Another great and very helpful instructional video. Whoever hit the "thumbs down" button is an idiot. These are great videos and you are an excellent teacher.
Glad you like them!
Thanks to share it, my friend! Regards from Spain
Thanks for watching!
thanku so much, your videos have helped me a lot in college.
Glad to hear that
well explained thank you for the support
Great tutorial sir
Glad you liked it
And thanks for your great support and sharing my dear friend.....!!!
Thx for helping! Great stuff
Happy to help!
Thank you very much, it is very helpful
How you are coping the ipv6address from the packet tracer and pasting in PC s ipv6 ...I am unable to copy and paste ..can you tell the command that you're using at 3:37
Actually I worked with old packet tracer and it was possible to copy the address from the activity window. Now in the new version 8.0 and above, it is not allowing to copy any text/address.
Thanks for your great support and sharing my dear friend!
Excellent, excellent video!
Glad you liked it!
thank you so much
That video help me so much
Glad it helped!
subscribed!!! thanks a lot
Thanks for the sub!
Thanks very much
You are welcome
amazing best and best
Hi friend I need your help to increase the size of my screen on my Addressing Table for my packet tracer what can I do? please
You have the preference in option menu, where you can change the font and screen size!
For the question "What filtering command would you use to display only the interfaces with addresses assigned?"
The answer is:
show ip int brief | include up
The result is:
R2#show ip int brief | include up
GigabitEthernet0/0/0 10.0.4.1 YES manual up up
GigabitEthernet0/0/1 10.0.5.1 YES manual up up
Serial0/1/0 10.0.3.2 YES manual up up
Serial0/1/1 209.165.200.225 YES manual up up
What’s interesting is that the up/up status doesn’t have IPv4 addresses all I see is we configure IPv6 addresses and prefixes with serial port and gigabit Ethernet ports. Do you know we can’t we configure the IPv4 address?
hello, great video, i have a problem understanding when is the "cisco" password for vty used? ( it says " Assign cisco as the vty password") since we just use username and password SSHadmin and 55Hadm!n when connecting in ssh.
You can contact us for further assistance!
Thank you for your great support and sharing my dear friend!
I got a bad mask error for the s0/1/1 any solutions to that
Please make sure that you given the correct details!
can you tell me step by step make this topologi ?
We have similar videos done from the scratch!
21:01 C:\>ping 2001:db8:acad:5::10
Pinging 2001:db8:acad:5::10 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 2001:DB8:ACAD:5::10:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\>
this is what mine said.
I am putting in the command transport input ssh but I keep receiving an error that says invalid input detected at '^' marker
make sure that you given this command in the line mode
line vty 0 15
why when i write 2001:db8:acad:4: :10 its invalid ipv6?
?
In PC or in Router
If you give in router you have to give the prefix also.
Thanks for your great support and sharing us with your friends too!
@@TechAcad mm im not explaint correctly. I write these in pc3 not problem Whit ipv4 . The problem its when i try ipv6.
sir can u help me with the lab ?
Yes!
You can contact us!
Did they respond you with the help from them?
when i ping to pc4 im getting error destination host unreachable
ive done everything like youbut cant ping now.
What's the password for the R1 i used cisco for the first one but I can't get the second password? PLS HELP
Try letmein or itsasecret or class
What is the password for R2 when i enter enable then i enter cisco then it shows agian password so what i have to do
Terima Kasih
Sama sama kk
I couldn’t get through pipe |
Hi this symbol called Pipe (|) used to filter the show commands.