Hi You can use the show command "show ip interface brief" in privileged exec mode. And still you face trouble, please feel free to contact our team And thank you so much for your great support and sharing my dear friend...!!!
There appears to be a bug in this assignment. Either that or a typo. On the final step, it says configure an IPv6 directly connected floating host route. But it doesn't accept a directly connected route as the answer. It only accepts a next hop route as the correct answer. So either the question is wrong, or the answer is wrong.
@@TechAcad Part 5: Configure Host Routes. Step 2: Configure IPv6 host routes. b. On Edge Router, configure an IPv6 (directly connected) floating host route to the customer sever through the ISP2 router. Use an administrative distance of 5. Why does it takes the next host IP instead of the interface? Must be Packet tracer mistake that took me two days to figure╰（‵□′）╯after watchin your video!!! Thanks by the way. (👉ﾟヮﾟ)👉
Finally !! i got it better ! 🙂 It's a pritty hard one, with a little help I finally finished it. I just wondered sometimes you specify the path to for example s0/0/1 or to the ip adress from the s0/0/1 . But I see it give in both situation a score. Does it matter wich method I use?
on Part 5 last part where they ask to configure Direct ipv6 route but the port u choose is on isp2 router... so does direct route = next hop address? thanks
Hi, Currently we are working with CCNA, we will add CCNP also in future. Stay Tuned And thank you so much for your great support and sharing my dear friend....!!!
Hi Tech Acad I have question regarding the prefex for Step 2 Configure IPV6 Host routes in a. On Edge router configure an IPV6 next hop route to the customer server through the ISP1 router the address is given in the table with no prefix how did it was 128 for the server please explain thank you in adavnce
if i ever struggle or get lost doing an assignment i can always count on Tech Acad to help me! :)
Glad to hear that.
And thanks for your great support and sharing my dear friend....!!
You're the best, TechAcad! Much thanks. May the RUclips algorithm shine brightly upon your faces, for now and forever :)
You're the best!
I watch your videos all the time. They help me a lot with my packet tracert assignments
Keep it up with the great work!
Great to hear!
Hey teacher I have a question, at this part 23:57 why did you put that /128 at the end?
ipv6 route 2001:db8:f:f::10/128 on customer server, where does the /128 come from?
Yes, this is how we have to configure static host route.
Thank you so much for this.. Please keep up the awesome work.
Thanks, will do!
how do you get the prefix mask at 11:56
Thank you Tech Acad
You are welcome
may i know what's the shortcut key for display the interfaces?
without clicking show interface from Preferences window
Hi
You can use the show command "show ip interface brief" in privileged exec mode.
And still you face trouble, please feel free to contact our team
And thank you so much for your great support and sharing my dear friend...!!!
There appears to be a bug in this assignment. Either that or a typo. On the final step, it says configure an IPv6 directly connected floating host route. But it doesn't accept a directly connected route as the answer. It only accepts a next hop route as the correct answer. So either the question is wrong, or the answer is wrong.
4:32 it won’t let me enter this in keeps saying invalid input detected at the first 0
part 6 step 2 b says to use directly connected interface which is s0/0/1, why did you use next hop address instead?
I will check that!
Thank you!
@@TechAcad
Part 5: Configure Host Routes.
Step 2: Configure IPv6 host routes.
b. On Edge Router, configure an IPv6 (directly connected) floating host route to the customer sever through
the ISP2 router. Use an administrative distance of 5. Why does it takes the next host IP instead of the interface? Must be Packet tracer mistake that took me two days to figure╰（‵□′）╯after watchin your video!!! Thanks by the way. (👉ﾟヮﾟ)👉
there are only 5 parts, where do you mean
Finally !! i got it better ! 🙂
It's a pritty hard one, with a little help I finally finished it.
I just wondered sometimes you specify the path to for example s0/0/1 or to the ip adress from the s0/0/1 . But I see it give in both situation a score. Does it matter wich method I use?
Glad I could help!
on Part 5 last part where they ask to configure Direct ipv6 route but the port u choose is on isp2 router... so does direct route = next hop address? thanks
Do you guys have ccnp sample exam questions ?
Hi, Currently we are working with CCNA, we will add CCNP also in future. Stay Tuned
And thank you so much for your great support and sharing my dear friend....!!!
You are AWESOME
Hi Tech Acad I have question regarding the prefex for Step 2 Configure IPV6 Host routes in
a. On Edge router configure an IPV6 next hop route to the customer server through the ISP1 router
the address is given in the table with no prefix how did it was 128 for the server
please explain thank you in adavnce
Perfect! Thank you!
Glad it helped!
Can't get my screen size to shrink so i can access commands at the top. Nothing works. Not preference, fonts, not control = or -, nothing. pls advise.
In Packet Tracer go to Preference menu, so that you can adjust the font size as per the requirements!
Thank you
You're welcome
how to get this Configuration file
thank you as always!!!
My pleasure!
✨✨✨✨✨Five stars !!!!!!
Glad you like it!
thanks dad!!!
Any time!
excellent
Glad it helped!
👍👍👍
Thanks for your great support and sharing my dear friend...!!!
Thankyou
You’re welcome 😊
Perfect
Thanking you .. :)
Glad you like them!
this is crap, my completion rate for this is only 81%
You prolly missed a step
@@pengks9630 yeah, probably
Make sure that the server address starts with 198 not 192
@@a.newman8299 You just saved my ass. thank you homie