Thank You. I damaged my radiator when changing the serpentine belt. Yep, I let my breaker bar from removing tension on the pulley, hit the radiator. Feeling dumb. But your video showed me how to remove the radiator and introduced me to your brand.
Are they pressure tested before shipping? Any concerns or instructions for putting steel bolts back into your aluminum rad? How do you justify 4 times the cost of stock?
The radiators are all pressure tested during quality control to ensure the wont have issues out of the box. The bolts used in the radiator are generally stainless and safe to install, if not we will generally include the hardware.
So I just got done replacing a boat load of other parts and my radiator has a leak. So knowing that I'll have to replace it, don't have a choice, I was looking it over. Looks like you could remove the power steering cooler and transmission cooler without removing the intercooler? Zip tie the trans cooler up to the frame and set the power steering cooler on something. Then continue to remove the radiator very easily. Any flaws to this plan? It looks like I've got the room to do it. I also have the radiator over flow tank in the back passenger side corner. Not attached to the radiator. 05 Dodge ram 2500 5.9 here.
Hey 2011mustang5.oh! We'd advise you to follow our install video, and feel free to refer to this install guide: cdn.mishimoto.com/media/productpdf/MMRAD-RAM-03_InstallGuide.pdf if you have any questions, or comments, you can always call our customer support specialists at 1-877-GOMISHI or email support@mishimoto.com! :)
![BRASIL vs. PERÚ [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/tbyOJKXfQnI/mqdefault.jpg)
Going to replace mine today! I have the 2007 5.9L. Cummins.
Thanks for the video!
Thank You. I damaged my radiator when changing the serpentine belt. Yep, I let my breaker bar from removing tension on the pulley, hit the radiator. Feeling dumb. But your video showed me how to remove the radiator and introduced me to your brand.
Thanks for the video. Replaced mine using this video and it went smooth!
05 up cummins! pull accordion shroud piece/ pull fan clutch/drop cac tubes drain radiator /disconnect rad hoses twist out! 1hr its done
You don't have to remove the fan clutch.
Are they pressure tested before shipping? Any concerns or instructions for putting steel bolts back into your aluminum rad? How do you justify 4 times the cost of stock?
The radiators are all pressure tested during quality control to ensure the wont have issues out of the box. The bolts used in the radiator are generally stainless and safe to install, if not we will generally include the hardware.
So I just got done replacing a boat load of other parts and my radiator has a leak. So knowing that I'll have to replace it, don't have a choice, I was looking it over.
Looks like you could remove the power steering cooler and transmission cooler without removing the intercooler? Zip tie the trans cooler up to the frame and set the power steering cooler on something. Then continue to remove the radiator very easily.
Any flaws to this plan? It looks like I've got the room to do it.
I also have the radiator over flow tank in the back passenger side corner. Not attached to the radiator. 05 Dodge ram 2500 5.9 here.
Hey 2011mustang5.oh! We'd advise you to follow our install video, and feel free to refer to this install guide: cdn.mishimoto.com/media/productpdf/MMRAD-RAM-03_InstallGuide.pdf if you have any questions, or comments, you can always call our customer support specialists at 1-877-GOMISHI or email support@mishimoto.com! :)
Mishimoto Automotive
Anyone know if the factory coolant hoses work with this radiator?
Yes, they do
This is not a 2004. Half my stuff is different bolt sizes and in different place's. This kinda helped though
ted s You probably have a 2004.5. There were some changes mid year.
Anyone happen to know if the Ram in the video is a 03?
It sure looks like one (I have an 03).