How To Test Crankshaft and Camshaft Position Sensors With a Multimeter

How to test crankshaft and camshaft position sensors with a multimeter
step 1 turn on the multimeter to the on position
step 2 switch the resistance to 20k ohms
step 3 connect the multimeter terminals to the sensor pins once you have done that wait for the multimeter to read and you're good to go
step 4 if the multimeter did not read that means the sensor is not good which requires replacement to get the correct start watch more videos on this channel on how to use the multimeter in the video description below thanks for watching
Grow your RUclips channel with: www.tubebuddy....
For business:[e-mail]
Kindly support Patreon account:www.patreon.co...
Learn how to for your car's rough idle problems at high rpm
• How To fix Rough Idle ...
#FACEBOOK: ERIC AUTO TV
#TWITTER: @ERIC AUTO
#INSTAGRAM: ERIC AUTO CENTRE
#RUclips: ERIC AUTO CENTRE
#WEBSITE:www.ericautocenter.blogspot.com
#WHATSAPP: [phone]
Must watch...
The Causes Of High Fuel Consumption and...
• The Causes Of High Fue...
I LOVE THIS .....DAMMM!!!!!!!!!!!!...
DON'T TRY THIS, YOU WILL SPOIL YOUR TRANSMISSION & TCM...
• DON'T TRY THIS, YOU WI...
Ghana's Local Car Manufacturing Company 2021
• Ghana's Local Car Manu...

[@ERICAUTOCENTER]

*I am your car doctor,Hello guys upcoming video has scheduled to live tomo*rrow at 3:00 pm local time exclusive make a date to watch thank you all.

[@gyanato4458]

Thank you your content are very informative

[@capitalerose6410]

If there werent any muffles in the sound of the video i would have given you a 10/10 🙏🏽 smart man.. just need louder settings thank you

[@ERICAUTOCENTER]

Thank you

[@Behold876]

Thank you bro

[@ERICAUTOCENTER]

You welcome don’t hesitate to share the video and leave highlighted comments

[@Snickls]

I read that a crank position sensor could be tested with the multimeter set to AC voltage, while cranking the engine a reading of .3 to 1 v/AC should be present coming from the sensor.
Is this a legitimate alternate method of testing, or is it garbage?

[@georgeasante2303]

Have hit the sub bottom fast powerful video content 🇬🇭💪

[@johnlungu7368]

Hello bro I have a hyundai it starts by after some time it cuts what could be the prob

[@ERICAUTOCENTER]

Find a professional technician to diagnose it on your end it may be possible causes

[@angelcedeno26]

I'm getting an ohms reading of 0.95 on a crank sensor I removed and replaced with a new one because the car kept stalling,is the reading of 0.95 bad? Should there be any periods before the numbers? Or should it be a full number for example 200 with no periods before it?sorry for the questions, I'm trying to learn this.

[@ERICAUTOCENTER]

Literary, a good working crank sensor should have an internal resistance of 200Ω to 2000Ω. If the sensor shows a 0Ω value, that indicates a short circuit, and if the value is boundless or million ohms, there is an open circuit.

[@angelcedeno26]

@@ERICAUTOCENTER ok thanks for your help.

[@robertcristian1942]

brother i have tested my sensor, on 200 ohm setting it says 00.4, and on 20k setting it stays at 0.00. is it defect?

[@ERICAUTOCENTER]

If the sensor is good there must be a continuity 0.01 0.02 0.03 0r 0.04 hence your sensor can give you wrong readings base on the type of multimeter you used. So recheck it well

[@bobdeengineer7396]

Thank you for the explanation

[@ERICAUTOCENTER]

Welcome

[@tajudeenabayomi3925]

Greetings brother, we shoukd set the multimeter to 20k ohms or 20m ohms. Please which ohms. Thanks

[@ERICAUTOCENTER]

kindly read the video description everything is there thanks.

[@e90gabe]

Great Video👍👍

[@ERICAUTOCENTER]

Thanks my niga

[@isaacdzokoto-jnr6306]

Hi boss, please how can use multimeter to check ford transit key

[@ERICAUTOCENTER]

Please wait. You can’t text the whole key to figure out whether it’s working or not but best of my knowledge there is an expire time for that particular key and when it happens you need to program it before it will work again. However if you want check the key open it and text the resistance if there’s continuity or replace the battery 🪫. I have done a lot of videos how to test resistance with multimeter check them out on my channel. A lot of useful videos if not see to smart key expect to assist you.

[@ebenezerbamflo2546]

what power come on 2 pine sensor

[@olivermutukudzi7914]

I have 3 pin sensor bmw how do I test

[@ERICAUTOCENTER]

The video is on my channel scroll into my RUclips channel you will found it

[@enockchikaka502]

@@ERICAUTOCENTER what of if the ckp of a Hino700 is reading 0,12

[@starlitetvgh]

Woow....this is good

[@ERICAUTOCENTER]

Thanks bro

[@solaomotola]

Thanks for the video . Please how can I contact you directly?

[@ERICAUTOCENTER]

Welcome. contact us on our website ericautocenter.com or on RUclips main page

[@generalgriphineworldboss1811]

please which input voltage comes from ecu on a two pin crankshaft position sensor

[@ERICAUTOCENTER]

±0.25 V minimum up to ±60 V

[@generalgriphineworldboss1811]

thanks so much

[@ojuelegba-id8rm]

Why didn't you use 3 pin sensor like Nissan

[@ERICAUTOCENTER]

I you need that check on my page videos are many

[@AmusedCamperVan-lx6qr]

Oam but won't put out vts.

[@ERICAUTOCENTER]

I don’t get what you are saying make it clear

[@sadikiballack1631]

You didn't turn the allo to ohm to test continuity ity

[@ERICAUTOCENTER]

Explain well so I can help with the answer

[@muhammedfatty82]

❤

[@robertoesparza3498]

What is a MultiMitAa??😮

[@ERICAUTOCENTER]

I have answered your question in the new video which i scheduled to premiere tomorrow 4am Ghana time stay updated.

[@AmusedCamperVan-lx6qr]

You can't ck ccs with ohm meter!

[@ERICAUTOCENTER]

Your question again?

[@joeboch348]

see my video on how to replace AA battery and rehang clock😂

[@ERICAUTOCENTER]

Make your comments clear bro if possible retype again.

[@frundlemud]

crap sound switched off

[@AmusedCamperVan-lx6qr]

No way with ohm

[@ERICAUTOCENTER]

Check your multimeter

[@ramatuali5037]

I am first here let's join the feed in numbers

[@ERICAUTOCENTER]

Thank you. much appreciated