Thanks. The laser cut Guillow's kits have a lot better balsa than the older ones. It was a fun kit to build. I hope to post some more flight vids shortly.
Hats off to the wives that have to follow us to the field to try for photographic evidence... Himagine if we had to film them while they're working in the garden... or trying their just finished dresses...🙂
Thanks. You're probably right about the completion rate. I'm trying to disprove the notion that Guillow's kits won't fly. LOL All my builds so far have flown at least 20 seconds which is the FAC minimum. If I had a bigger field I could really crank 'em up. Maybe one day.
Hi so I’m building this kit now.. seems like I’ve punched and cut out every you did. Not sure I’m going to make 24g. I’m at 20 now. With no prop no rubber and no covering. What am I missing?
The wood Guillows uses can be very heavy to almost acceptable. My kit had decent wood but you must have gotten some heavy stuff. It's too bad but I guess that's how they keep the price down. Yours will still fly ok though. I've built some real heavy ones that did ok.
@@me262a1 well I’ve been doing surgery on it all night. Think I’ll make just under 26 with out rubber. Left off the gear. No guns. No antenna. No paint. Just a light dope. And some real rubber for the motor. Not the in box junk.
@@hondaxl250k0 I used a 15 inch loop of 1/8th fai. The prop is from easy built and I really like it a lot. Bigger rubber will work but I like mine to fly low and slow if I can. I use this method for braiding. ruclips.net/video/7r61CkY2aQM/видео.html
Any weight that can be removed aft of the center of gravity is helpful. A lighter model will fly longer. It doesn't have to be done though. These kits a pretty hard to get to fly so don't get discouraged. If you use facebook, "Guillows Flying Models" group will help you out greatly. They are very supportive and any questions you have they know the answers. Good luck!!!
I love your videos! Can you tell me what the little red kit with the black (???) tools inside is? Are they for making holes in the balsa to lighten the model? If it is where can they be purchased?
Thanks. The kit is an Owden hollow punch set. It's for punching holes in leather. It's not the best for balsa but I go slow and twist it. It can easily split the wood. I got it off Amazon. If you know were a gun range is empty shell casings would make better punches. Just sharpen them up a little.
Fantastic build! All those holes you make to lighten it make it look even better. In credible detail with the hammer and sickles! How did you make them so small?
Every bit of weight saving is helpful. I downloaded a picture of the flag and reduced it in photoshop and printed it on decal paper. I sprayed a few coats of clear acrylic before I cut the decals out to add a little strength. It works pretty good.
@@me262a1 The whole decal paper approach seems to be a good one. I notice that as I struggle to hand paint markings. I need to get to that level at some point. Thx!
I'll be honest these kits are way harder to build then any of my big rc balsa kits i have built tiny parts very delicate and takes lots of time to get pieces to fit perfect before gluing if not it's gonna be full of ugly gaps pueces not glued properly and the airframe wont be straight I gave up on my first guillows model
I'm new to building flying models and it started with a contest by a Guillows specific facebook group a couple years ago. I figured if I could get these to fly I'm doing something right. I just can't seem to stop building them. LOL
@@me262a1 please post how to build videos it would help me and thousands of us who dont know how to build a guillows rubber motor plane the correct way to make it fly good. And your tips and tricks on how you build them. I saw your contest video entry great job on that btw
Keep on building my friend once you build one balsa plane be that it is either a full rc plane or a guillows free flight rubber plane it's addictive cuse you built something with your two hands that actually flies and performs
@@me262a1 there is a guy on RUclips that has very detailed how to videos on rc conversion on these. I bought a p51 mustang looking balsa plane soneone built I gotta say in the mid 90s due to the type of micro servos in it cuse they was discontinued in 1998. I think the builder enlarged tge plans a little but Idk hard to tell and has teansparebt light weight monokote. Idk if it is a guillows kit but sure does look lile one and it mayches up just barley to the guillows plans for this plane. It's a very beautiful plane and a blast to fly. I dont fly it much unless I'm at a rc fly in day at airfield cuse ppl love to see it fly and it goes 75 mph with the micro drone brushless motor on a 4s micro Lipo 100c
I think you did a great job! Congratulations on your first flight! And you got some quality time with the family as well- priceless!
Beautiful flight with the family 👨👩👧
Nice build! Looks like she's definitely a flyer. My future project list just got a little bit longer:) Thank you for posting the video.
Thanks. The laser cut Guillow's kits have a lot better balsa than the older ones. It was a fun kit to build. I hope to post some more flight vids shortly.
Great model! Thanks for posting this video!
nice, clean build
Hats off to the wives that have to follow us to the field to try for photographic evidence... Himagine if we had to film them while they're working in the garden... or trying their just finished dresses...🙂
Nice to see one fly. I bet less than 1% are ever finished and 0.1% are actually flown.
Thanks. You're probably right about the completion rate. I'm trying to disprove the notion that Guillow's kits won't fly. LOL All my builds so far have flown at least 20 seconds which is the FAC minimum. If I had a bigger field I could really crank 'em up. Maybe one day.
Hi so I’m building this kit now.. seems like I’ve punched and cut out every you did. Not sure I’m going to make 24g. I’m at 20 now. With no prop no rubber and no covering. What am I missing?
The wood Guillows uses can be very heavy to almost acceptable. My kit had decent wood but you must have gotten some heavy stuff. It's too bad but I guess that's how they keep the price down. Yours will still fly ok though. I've built some real heavy ones that did ok.
@@me262a1 well I’ve been doing surgery on it all night. Think I’ll make just under 26 with out rubber. Left off the gear. No guns. No antenna. No paint. Just a light dope. And some real rubber for the motor. Not the in box junk.
@@me262a1 what rubber did you use for the motor?
@@hondaxl250k0 I used a 15 inch loop of 1/8th fai. The prop is from easy built and I really like it a lot. Bigger rubber will work but I like mine to fly low and slow if I can. I use this method for braiding. ruclips.net/video/7r61CkY2aQM/видео.html
Nice well done
how important is it to drill holes in the model? i am building one right now and want to make it fly with the included rubber
Any weight that can be removed aft of the center of gravity is helpful. A lighter model will fly longer. It doesn't have to be done though. These kits a pretty hard to get to fly so don't get discouraged. If you use facebook, "Guillows Flying Models" group will help you out greatly. They are very supportive and any questions you have they know the answers. Good luck!!!
Good job man ,
Thanks. I already had to make a repair video!!
Great Flyer! Loving the Ukrainian markings and the kill marks!
Did ever convert the plan to RC?
No. I'm a dedicated rubber power flyer.
I love your videos! Can you tell me what the little red kit with the black (???) tools inside is? Are they for making holes in the balsa to lighten the model? If it is where can they be purchased?
Thanks. The kit is an Owden hollow punch set. It's for punching holes in leather. It's not the best for balsa but I go slow and twist it. It can easily split the wood. I got it off Amazon. If you know were a gun range is empty shell casings would make better punches. Just sharpen them up a little.
@@me262a1 I like the idea of using empty shell casings I will try that method. Thanks for your input.
Fantastic build! All those holes you make to lighten it make it look even better. In credible detail with the hammer and sickles! How did you make them so small?
Every bit of weight saving is helpful. I downloaded a picture of the flag and reduced it in photoshop and printed it on decal paper. I sprayed a few coats of clear acrylic before I cut the decals out to add a little strength. It works pretty good.
@@me262a1 The whole decal paper approach seems to be a good one. I notice that as I struggle to hand paint markings. I need to get to that level at some point. Thx!
Nice work. I working on this particular model. Is been a year jajajja. Can you help me?? My instruccion are to damage can you send me a pdf scan ??
The bass wood is to thin, it's hard to put thin balsa wood together
What? You can turn clothespins inside out?!? (See 1:45) Changed my life.
I know, right!!! I first saw this on the "Guillow's Flying Models" facebook group. They make wonderful little clamps.
I'll be honest these kits are way harder to build then any of my big rc balsa kits i have built tiny parts very delicate and takes lots of time to get pieces to fit perfect before gluing if not it's gonna be full of ugly gaps pueces not glued properly and the airframe wont be straight I gave up on my first guillows model
I'm new to building flying models and it started with a contest by a Guillows specific facebook group a couple years ago. I figured if I could get these to fly I'm doing something right. I just can't seem to stop building them. LOL
@@me262a1 please post how to build videos it would help me and thousands of us who dont know how to build a guillows rubber motor plane the correct way to make it fly good. And your tips and tricks on how you build them. I saw your contest video entry great job on that btw
Keep on building my friend once you build one balsa plane be that it is either a full rc plane or a guillows free flight rubber plane it's addictive cuse you built something with your two hands that actually flies and performs
@@me262a1 there is a guy on RUclips that has very detailed how to videos on rc conversion on these. I bought a p51 mustang looking balsa plane soneone built I gotta say in the mid 90s due to the type of micro servos in it cuse they was discontinued in 1998. I think the builder enlarged tge plans a little but Idk hard to tell and has teansparebt light weight monokote. Idk if it is a guillows kit but sure does look lile one and it mayches up just barley to the guillows plans for this plane. It's a very beautiful plane and a blast to fly. I dont fly it much unless I'm at a rc fly in day at airfield cuse ppl love to see it fly and it goes 75 mph with the micro drone brushless motor on a 4s micro Lipo 100c
@@youknoweverything7643 Wow! Your plane sounds like a monster for sure. I'd like to see her fly.