Great job in every aspect. I loved the flight where it flew a large circle and landed near you and rolled to a stop almost at your feet. Thanks for all the work that you put into sharing this experience with all of us. Have a wonderful day!
What a beautiful build And such lovely flights. I had this kit as a kid but didn't have the skill to build it and the knowledge to trim and flow it but after watching this I have renewed enthusiasm.
I commend Guillows for still producing kits like this and I've built my share. However, as a scratch builder I prefer to draw my own plans because kits generally produce heavy models. The Neiuport is one of my favorite WWI biplanes. Yours looks great.
This video is perfect in itself. I love this prototype, it's a great model, beautiful work perfect flight and my aesthetic is completely satisfied! Thx!!!
I never knew the Guillow kits could actually fly so well. Looks like the key is lightening up the build. I have this kit in a box in my basement. Not sure if all the parts are still there but I think its time to dust it off :)
Well l’m impressed. l made a couple of these balsa planes in my youth, as l remember they flew a couple of feet, but they did look great. l take it you used the rubber band from the kit, and you seem to be adding some ball bearings to the engine.
Very impressive. I've never seen a Guillows model stay up this long because I guess all I've ever seen fly are the old heavy ones they used to make. I see they finally tright to lighten their ships, because I and many others had complained about their heaviness and bad wood. This is much better, now and is getting competitive for the first time ever
Great job on the removal of excess weight, and you’re braver than me: I would never fly over such short grass! So, I’ll never see such a fabulous landing !
@@TheMwarrior50 The first thing is to make it exactly according to the plan. ・CG ・Dihedral angle ・Down thrust ・Angle of attack And make it light. That's all I can say.
Yes, a shelf is where this one belongs. Beautifully built and finished, it looks great. Fly? Well, not so much. You did a great job lightening it, but you didn’t alter the terrible and inefficient airfoil which does not produce sufficient lift for good flight. You want some up elevator, and/or an increase of top wing incidence (more decalage), and/or some up thrust, and/or a farther forward C.G., or a few prayers to the flight gods, or maybe all of these to get it to climb. All the increase of turns of the motor did was to make it go faster and fly farther away in a larger circle. Even if by some miracle you did get some altitude, once the propellor stopped, this airplane would have “glided” like a stone. Well, at least you’ll never have to fear it catching a thermal and flying away. No D/T wanted for this one. Guillows models do not fly well on rubber power, and any other power makes them fly too fast. With an electric or glow motor they flit around like a drunken mosquito. Such a shame. Try a different brand of kit like Dumas or Dare. These models can actually fly. Cheers.
Спорт
Folks, THIS is how you build and fly a Guillows kit! Absolutely fantastic!
Thank you for watching.
That was absolutely awesome!! Thank you for sharing this with us.
Great job in every aspect. I loved the flight where it flew a large circle and landed near you and rolled to a stop almost at your feet. Thanks for all the work that you put into sharing this experience with all of us. Have a wonderful day!
Thank you for watching. I was happy to land at my feet at the right time.
You really turn this hobby into an art form
Thank you for watching.
What a beautiful build
And such lovely flights.
I had this kit as a kid but didn't have the skill to build it and the knowledge to trim and flow it but after watching this I have renewed enthusiasm.
Thank you for watching. Please make it and fly it.
Absolutely thrilling! Congratulations! Rudolph
Thank you for watching.
Your craftsmanship is superb. A beautiful model and perfectly trimmed.
Thank you for watching.
This was my favorite kit to build when i was growing up.
Thank you for watching.
Absolutely a truly beautiful build and wonderful flights. Thank you so much for posting your video, it is very inspirational :)
Thank you for watching. It will be encouraging.
I commend Guillows for still producing kits like this and I've built my share. However, as a scratch builder I prefer to draw my own plans because kits generally produce heavy models. The Neiuport is one of my favorite WWI biplanes. Yours looks great.
Thank you for watching
Beautiful build- excellent work lightening up the model. Fantastic flyer as well!
Thank you for many evaluations.
Awesome job incredible flight
Beautiful build and looks like it flies great!!! Thanks for sharing it with us!
Thank you for watching.
That's pretty darn nice!
This video is perfect in itself. I love this prototype, it's a great model, beautiful work perfect flight and my aesthetic is completely satisfied! Thx!!!
Thank you for your comment.
That was amazing! Great job.
Thank you
Beautiful build and flights. Some of the best I've seen. I might try a Guillow's DVII now. Your prop is great.
Thank you for watching. I was also impressed with your amazing Fokker D8 build and fly. I'm looking forward to the Fokker DVⅡ video.
Love to see it. Nieuport is one of my favorite model
Thank you for watching. I also referred to various sizes of Nieuport in your video.
Ohh. Thank you ❤️
3:34 Forget the airplane, I want that beautiful motorcycle!
Hahaha😆, that's my son's bike.
@@freeflight7750 WHo made it and what year? Love that old school faring.
@@DARIVSARCHITECTVS Built in April 2022.
@@freeflight7750 VERY nice.
Great job on the build and flight. There aren't many people that can make a Guillows kit fly!!
I never knew the Guillow kits could actually fly so well. Looks like the key is lightening up the build. I have this kit in a box in my basement. Not sure if all the parts are still there but I think its time to dust it off :)
Thank you for watching.
Guillow`s has a lot of good kits.
Well l’m impressed. l made a couple of these balsa planes in my youth, as l remember they flew a couple of feet, but they did look great. l take it you used the rubber band from the kit, and you seem to be adding some ball bearings to the engine.
Beauty! Well done!
Thank you for watching.
Excellent! The cafe racer looked pretty good too.
Thank you for watching.
Beautiful! Nice flights.
Thank you for watching.
Tremendous!!
What a beautifully trimmed out model
Thank you for watching.
Very impressive. I've never seen a Guillows model stay up this long because I guess all I've ever seen fly are the old heavy ones they used to make. I see they finally tright to lighten their ships, because I and many others had complained about their heaviness and bad wood. This is much better, now and is getting competitive for the first time ever
Thank you for watching. And thank you for your comment.
WOW !!--THAT PLANE REALLY GETS ALONG-!!-FLOWN BY THE FAMOUS "GUYNEMER"--BON-JOUR !MON--AMI-!!
Thank you for watching.
Lovely.
Lovely 👍
Thank you for watching. I referred to your channel for this work.
Mantaaap
Great job on the removal of excess weight, and you’re braver than me: I would never fly over such short grass!
So, I’ll never see such a fabulous landing !
Thank you for watching. Wires are embedded in the landing gear for landing on flat ground.
NICE!!!
Oh wow what a perfect plane Guillows would be proud. 😊
Thank you for watching.
Very Nice!
Thank you for watching.
Really nice work
thank you.
Realy good 😊
completely wonderful...i didnt know that Guillows s are so good fyers !!!
Guillow's offers kits that fly well. I like it.
I miss the old Comet kits.
Thank you for watching.
Im going to try making this as instructed, see how well it flies. Its my first balsa wood model kit :)
I'm sure you can build a plane that flies well.
@@freeflight7750 Could you do a tutorial on how you make these models fly well? I am so new to this and I fear im doing something wrong.
@@TheMwarrior50 The first thing is to make it exactly according to the plan.
・CG
・Dihedral angle
・Down thrust
・Angle of attack
And make it light.
That's all I can say.
Nice 👍
Very nice! Love...now I need one!
Thank you for watching. This plane flew gracefully.
lovely......
Thank you for watching.
Nice flyer. May I ask where this was filmed?
Thank you for watching. The shooting location is Hiroshima, Japan.
Beatiful model and fly! The only thing missing is the gun on top of the wing!
Thank you for your advice.
Very nice work. Was the kit rubber used for these flights?
I didn't use the rubber from the kit. I used TAN SUPER SPORT.
I was wondering how you select the size of the propeller for your models-- Thank -you -- Steve
Thank you for watching.
Very nice flyer🎉🎉🎉🎉😊
Thank you for watching.
@@freeflight7750 you are most welcome
What a beautifuly trimmed out model
Thank you for watching.
V/good!
Thank you for watching.
AMAZING ACHEIVEMENT WELLDONE...ANY PLANS TO CONVERT IT TO RC.
Thank you for watching the video.
What "tweaks" did you make to the control surfaces between the first shown gentle glide to nowhere and the final long flights?
Thank you for watching.
This aircraft flew without any adjustments
How did you do such neat holes in the formers and the ribs?
I widened the hole little by little with a file.
Good looking and a good flyer👍🏽👍🏽👍🏽
Thank you for watching.
what covering did you use and how did you apply it
The cover is Ezaki.
Yes, a shelf is where this one belongs. Beautifully built and finished, it looks great. Fly? Well, not so much. You did a great job lightening it, but you didn’t alter the terrible and inefficient airfoil which does not produce sufficient lift for good flight.
You want some up elevator, and/or an increase of top wing incidence (more decalage), and/or some up thrust, and/or a farther forward C.G., or a few prayers to the flight gods, or maybe all of these to get it to climb.
All the increase of turns of the motor did was to make it go faster and fly farther away in a larger circle. Even if by some miracle you did get some altitude, once the propellor stopped, this airplane would have “glided” like a stone. Well, at least you’ll never have to fear it catching a thermal and flying away. No D/T wanted for this one.
Guillows models do not fly well on rubber power, and any other power makes them fly too fast. With an electric or glow motor they flit around like a drunken mosquito. Such a shame. Try a different brand of kit like Dumas or Dare. These models can actually fly.
Cheers.
Thank you for your comment.
@@freeflight7750 YW
Can you make a tutorial on how you built this? Im making one right now and have a hell of a time with it.
Thank you for watching. It took me 170 hours to build this plane. And the information necessary for production uses social media.
@@freeflight7750 Oh ok! What social media is it on?
Nice build. I'd be worried about knocking the wings off the whole time.
Thank you for watching
Да, жаль что у нас не продают такие наборы😢, цена такого набора? Спасибо, удачи.
How many strands of ss rubber?
The rubber is 1/16 10g 7 loops.
飛行機の作り方、オンーラインにのていますか?ありがとうございます
ご視聴ありがとうございます。
私が発信するのはRUclipsのみで、他はありません。
👍👍👍👍👍👍👍
Tremendous! Some day you'll make a kite out of toilet paper!
Trainwreck,Elliot needed better backup band!!!🤣🤣🤣
Thank you for watching.