Using the purple linkage preload tool | 2021/2020 Orbea Occam suspension linkage service
HTML-код
- Опубликовано: 4 июл 2021
- In this video we take a look at a full service of rear suspension linkages on the Orbea Occam and show you how to use that awkward purple tool that you received with your new bike.
To find out how to do the 50 hour air sleeve maintenance of you shock, watch our other video:
• Fox Float DPS Performa...
Partners of this video:
duffler.com/
www.espoontorinpyora.com/
Official importer of Duffler bags to Finland is MTP Enterprise:
holvi.com/shop/mtpenterprise/
Subscribe to our channel and stay up to date with our trail videos, Trip Tips or race highlights on the Finnish mountain biking scene.
If you'd like to help us translating this video into your language, you can do it via this link ruclips.net/user/timedtext_cs_p...
MTB Suomi on Facebook / mtbsuomi
MTB Suomi on Instagram / mtbsuomi
MTB Suomi's website www.mtbsuomi.com/
Mine didn't come with the purple tool. I thought it was missing until I realised that it came as a little grey plug that was already screwed into one side of the linkage axle. Thought I'd share that in case anyone else doesn't have the purple tool and is wondering. Cheers again for the video, top work 👍
This is amazing so clear and helpful - now I feel confident I could service my Occam thanks!
The clearest and most helpful video I have seen to date. you are excellent. I did exactly as you explained. Thanks
Absolutely fantastic video. Thank you for such a thorough breakdown.
Thanks. Great video. I have a Rise so the linkage is exactly the same. This helps a lot with doing a service on my frame bearings and just giving everything a clean.
I got an used Orbea Occam and the previous owner rode a lot on very dry terrain. I really feel I need to clean like you did, thanks for the video
Great video. So easy to follow along
Thank you very much for the wonderful explaination!
Really helpful, thanks!
Thanks for all your Occam videos. I have a similar bike and for some time my Occam has started creaking from the area of the main linkage. Despite the bearings being serviced, the situation did not improve. Have you had a similar problem? Bye!
Super vidéo ! Merci
Very good, thanks.
Thanks for this, and your other Occam vids for that matter, I've used them all.
I literally just got my bike up on the stand today and wasn't sure how to take the chain stays apart. This video is great and tells me everything I need to know! Cheers!
Excellent video and many thanks for putting it up.
Just a tip, don't forget the green loctite on the spindles of the linkage axle! Otherwise they will loosen over time, creating play.
@12.05 you need to put threatlock on that bolt to... It can come loose and give play on the suspension setup. 👍
Thanks for that video, it's very helpfule. But is there a way to put it all back without purple linkage preload tool?
Thanks for the video, I have the preload tool but I'm missing the preload washer.Can you help me, what size is the preload washer and what is the material.
The Collet wedge (expander cone which holds the bottom pivot inside the bottom bracket) is really tight in there on mine - once the expander bolt has been removed - any ideas for removing a tight expander collar (cllet wedge)?