hey thunder i have been following you for a long time now and i said to you about a year or so ago that you were the best driver i have ever seen, im here to tell you you are the best basher to ever walk the planet. your skill to get a truck completely out of control n flips in the air and manage to land on all 4 is just insane!! love watching your videos and will continue forever!! would love to come to meet you and hit the death ramp and just chill for a day with you. rock on man and keep bashing away!!
Brother I am truly honored to receive a comment like this! I really appreciate it man! I try to do my best out there and hope for the best! Anytime you want to come down and jump off the death ramp you are welcome💪⚡️⚡️⚡️🏆 More action coming soon!😱🚀💯⚡️⚡️⚡️⚡️
Great video Thunder! Ya push them cars to their limits! My buddy picked up a non exb Kraton 6s and ran into a light pole at a slow speed. Probably less than 20mph? The whole car was destroyed. He needed to buy a roller. So many parts were busted. This was the Kraton's first and only crash. Legit, I was at his house when he unboxed it My maxx has hit trees, walls, and rocks at full pin. It has only ate trough that thin hub bearing that was rough since the day I bought it. That bearing took the end of the drive shaft. Less than a 15 dollar fix and 5 mins at the bench it was good to go.
⚡️🏆⚡️🏆⚡️🏆⚡️🏆⚡️🏆⚡️ NO WAY!!! That was absolutely Gnarly!!! I think the front and rear wheels touched each other! Incredible driving as usual buddy! And the little XRT that could! Awesome Thunder!!!⚡️🏆🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Haha yeah brother that was world record slam for the books 😂😂😂😂 Funny thing is I ordered a new chassis a week ago and it showed up yesterday 😂😂😂 I rebuilt the truck in a hour and 30 minutes and it is fixed 😱😱😱💯👍
Only thing we have consistently broken on the XRT is the Steering bellcrank, but that was only when THEASHING it to death with huge air and BAD landings. Problem has been resolved with the one available from M2C racing. Some guy we didn’t know broke the hex on one of the wheels, said it happened when he smashed into a light post in a parking lot. I have stuffed the X-MAXX and XRT into the ground or straight into rocks, trees, light posts etc. I’m not going to lie & say they never break, of course they break, but more often than not they are fine. Parts are cheap enough to keep a good selection of spares on hand. In the end it’s the brand and model that puts the smile on your face.👍🏼🔥🏁
Dude that was gnarly for sure!😆Killer jumps with both rigs! The Traxxas took some nasty's too but damn Dude the Outcast breaking in half was rough!! Looks like you need a M2C chassis on that one now! Driving the rear half was hilarious!!
Thank you so much brother! Haha man that was some serious carnage yesterday for sure😱😂😂😂 Yes the chassis needs upgrading no doubt but I do have to say I am very impressed with the new Arrma parts on this truck. This thing has definitely taken a major kicking 💪⚡️ Hope you and the family are doing awesome bro! I need to get over to your channel and see your new vids! Been so busy lately with life, you know how it goes.
My outcast gets here tomorrow. The new king!!! Now you flipped back to all it drives good but the xrt is a better basher? 🤦♂️ why do I even bother watching. People come to the channel because you put the trucks through the paces but once you start flip flopping people stop watching because they get confusing info. Now I’m torn, was a xrt a better basher? I wanted something 5th scale. The best but now I’m clueless!! I’m about reliability in as bashing toughness
@@luisfontanez1770the Outcast and Kraton are better bashers. I’ve broken tons more parts on my Xrt than my Kraton. Literally had to put $3k into it to just equal the durability of the K8s exb. I didn’t have to swap my chassis on my K8 but I did for sh!ts N’ gigs. All in all I have $2100k into my Kraton and $3200+ into my XRT.
@luisfontanez1770 For Good landings I'd give the advantage to the arrmas for speed height and Maneuverability. But when it comes to horrible bad landings the xmaxx/ xrt will walk away way more often than a Arrma. I always tell people if you enjoy dumping money into your rc cars and enjoy major overhauls and making regular repairs (basically ever big air session) pick Arrma. If you don't plan on big air or death ramps. Traxxas will give you almost a maintenance free experience. I'm a Arrma fan boy and enjoy big air. I always build x-maxxs and end up selling them. I always keep Arrmas around. But I also understand I will be breaking them and working on them. But it's also what I enjoy doing almost as much as the bashing aspect.
2 and a half months,sledge outcast exb 8s just unboxed and xmax 8s. I’m googling how to bind remote. So yeah haven’t land a backflip yet with my sledge and I’m over 4k $ In the hole 😂 🤦♂️
It was hard to watch you "robocop" that Outcast!! 😢 Poor unit... But holy crap, it took literally like 1000 monster smacks off the death ramp!💪 What a rig!! 💯🤘
After dozens of hours of brutal bashing and jumping harder than anyone else on YT, you finally managed to seriously break something, thats some absolutely insane durability.
That was worse than the Hindenburg accident. Seeing the wreck in slow-mo was horribly gut-wrenching; you can see the energy shockwave pass thru the Outcast. Well, time to get a new chassis. I guess the outcast is out of commission for a little while. And that was more like you snapped the front Quarter of the RC. She snapped at the weakest point where all those endpoints converge at the thinnest spot and there are so many bolt holes. But it looks like you had a lot of fun out there with our newest friend from Germany. Tell our friend: "Hallo, guten tag!?!" for us please. As Bill and Ted would say: "I hope y'all are having a most excellent day." If he is still there this weekend, maybe we 3 can get together for a crazy bash session. Of course, Mama Thunder is invited, too. Lol. Ha ha ha.
it might have snapped but chassis still looked straight 💪 always one thing i turn off on any kind of rc car, the AVC! i call it the AFC - Anti Fun Control 😅
Wow brother this carnage❗⚡❗⚡❗ Rip Outcast V2💥 XRT Is a beast 💪🏆 Mdr Driving the Outcast V2 half 😂 Great extreme bash session guys it was great Thanks mom Thunderrc for these crazy images 👍🌒
Jesus is Lord forever! Praise Him👑🏆 Yes it was brutal out there today man! Haha that was not my plan for this bash but oh well 😂😂😂 Death Ramp won today 😂😂😂
Have to add one more comment. In all fairness that poor Kraton took MAJOR abuse before it gave up the ghost. That chassis snap is from fatigue. Like bending the tab on a soda can back & forth, back & forth until it breaks off. I personally prefer Traxxas (sorry people) but the Kraton 8S V2 “AINT NOOO JOKE” so if you own one, your rollin with one of the very best. Another awesome vid⭐️⭐️⭐️⭐️⭐️
Man for the amount of beating that outcast took over again and for it being stock I’d definitely go with the outcast for sure best bang for your buck by far buddy!
Lawn dart onto pavement off death ramp...death landing. Not sure many stock chassis would survive that! It did survive a lot of big jumps from previous vidoes tho! I wonder if fatigue of the aluminum helped lead to that chassis snapping 🤔
#NotReal7075 😂😂 I KNOW a M2C Chassis would have maybe just bent... Who knows.... That was brutal took chunks of Concrete out😱😱 That 7075 Arrma uses us better than stock, but nothing close to even what Corally uses, and M2C is next level with the certifications they have to the quality.... But EVERYTHING has its limits. Bro that was insane, that avc was causing some crazyness... And that ramp, you gotta send it without a risk to concrete landing....reposition or something. That XRT took some crazy hits though to be fair. You pulled some crazy front flip recoveries😎👍.... Some of that was the avc helping but AVC is like 80% it's gonna screw ya when pulling wild stuff like that..... It's guessing what your trying to do and can be often wrong as you know, we all never use it when sending sucks that you caught after some brutal hits. Great video, your bro was landing some suck stuff as well, that's always fun!
Haha thank you my brother! You are exactly right my dude! M2C chassis would have bent for sure but maybe not have snapped. That hit was like Thanos with the gauntlet slamming down on the outcast!😱😱😱😂😂😂😂🤣🤣 Good news is that I had a new chassis and I have already fixed it my dude! Arrma tough 💪🔥😂😂😂🏆I hope you have an awesome day!
7:04 Agreed Julia😊😊 7:50 "Yes way","Yes way","Yes way" he sure did.😜😆😜😆 8:09 But take into consideration that crash didn't break the plate it actually looks like it broke off from the front that wasn't protected by that plate Rocky it sure took a ton of abuse and eventually the impact had to go somewhere?😢 10:03 Interesting enough it could be your "Wheelie" only truck? 😂 15:32 Exactly seeing is believing It snapped off at the weakest part of that plate.😮 Both you&Thomas put both of car's through their limits on the Death Ramp 👍😎👍 Also I must say another fantastic"AWESOME!!"&"GNARLY!!" job for your camera lady Julia AKA MAMA THUNDER for the epic footage and editing on this video👍😎👍😎👍😎👍👏👏👏👏
Thank you so much bro! Haha that poor Outcast has been through so much abuse man, I’m not even disappointed. The truck has way past my expectations and I love it 💪🏆⚡️⚡️⚡️
I still think the outcast is the top dog! I can’t believe the slams that xrt took though. I thought it woulda been broken off that first one he did!! Very surprised actually haha. Glad you got er fixed bro! Can’t wait to see more of this thing. Honestly from all the bad slams not too much broke. The chassis was surprising but it ain’t m2c so who knows what it’s actually made of lol
Your Chassis Broke after such little soft jumps? I would call Arrma and use the warranty! And show them your video to proof that it was not your fault !! 😆
Thunder babe was right! "You can't blame it on the remote" Blame it on the thunder ramp !!! You need to look into a "thanks" button for donations 🫣 I've given " earl moorhead" a couple hundred by a push of the button
Thank you brother! Yes I love my Outcast too! I need to order more shirts. I will be starting a merch soon 👍 I need to do some wrenching videos soon as well
This is a great video, kinda shows the massive difference between you and a regular person too. I dont know what it is but im feeling less impressed with the XRT now. just seems like a big lump thats very tough. Feels like the two options now are outcast or Xmaxx
Dam ! No car would of took a direct nose landing that hard ! For the chassis to have a a clean snap like that without any other bow or bend anywhere else proves to me that they have definitely improved the quality !. Its a shame you misread that landing bro itherwise she would be still kicking.
That controller on avc was making you look like you forgot how to drive 😅glad you noticed it was on got to see the real thunder skills your friend was struggling with the death ramp that xrt took some hard hits I'm impressed that it survived fun stuff brother thanks for the intertainment 👊
OMG you are the MASTER BASHER mate 😂 The back wheels actually touched the front wheels on impact - this is a first hahaha Then driving it with the rear wheels only had me in stitches - man I am on your channel now every day without fail
If i had the drawings of that chassis i could design and machine one that wouldn't break. Make it a few pounds heavier but it wouldnt break. It be spendy. Id use 1/2" or 1" aluminum perhaps. Ill look for cad drawings for solidworks. I have a haas vf3 just sittin here atm. I make billet dh ebikes from hell. Cha-ching!
Sounds like the motor mount got bent and The mesh was rubbing hard on the XRT. Or just the mesh got jacked. You can definitely hear it rubbing hard. Too bad we aren’t closer, i want to try my XRT and K12 exb on your death ramp.
You need to level out the top of your ramp. It's at an angle in which it turns the truck when you want to flip, making the truck wants to land sideways ish.
I know people will talk trash about the arrma chassis, but I doesn't matter traxxas or arrma or whatever...you send cars hard over and over....you're bound to have issues. Add a bad day of driving which we all have...and you get catastrophic breaks. It's the way it is. I don't care what you have in your car....asphalt nose landings will usually be the nail in the coffin to at least a few parts on a car. The ultimate definition of high risk high reward.
XRT for the win..! Say what you want about Traxxas and their rigs, but you cannot deny their durability. Had an outcast EXB 8s and it was a good handling rig, but could never take abuse like my XMAXX could. Sold the Outcast and got the XRT and never looked back. Throw some better tires on the XRT, stiffen the shocks and you’ll have the handling similar to the Outcast but with Traxxas durability. I put sledgehammers on mine and it’s ridiculous..!!
hey thunder i have been following you for a long time now and i said to you about a year or so ago that you were the best driver i have ever seen, im here to tell you you are the best basher to ever walk the planet. your skill to get a truck completely out of control n flips in the air and manage to land on all 4 is just insane!! love watching your videos and will continue forever!! would love to come to meet you and hit the death ramp and just chill for a day with you. rock on man and keep bashing away!!
Brother I am truly honored to receive a comment like this! I really appreciate it man! I try to do my best out there and hope for the best! Anytime you want to come down and jump off the death ramp you are welcome💪⚡️⚡️⚡️🏆 More action coming soon!😱🚀💯⚡️⚡️⚡️⚡️
A 50' lawn dart directly onto pavement would kill anything. Carnage like that is always fun to watch..... as long as it's not mine! 😅
Holy cow I've never ever seen anything this insane. I'm lost for words. RIP OUTCAST😮
Haha me either man! Good news is that I have already fixed the Outcast with a new chassis 👍⚡️⚡️⚡️⚡️
Brutal!.. not sure if anything would have took that without damage. Wow! Rebuild time!!❤
Haha yes that slam would have killed anything 😱😂😂😂😂
Great educational video on AVC! I didn’t know it would affect a jump that much! Learn some new today!
Thank you so much!🏆😱😱💯💯⚡️
Crazy video so much carnage, can’t wait to see the Outcast EXB V2 in action again once fixed.
Dang AVC 😡
Thanks brother!😱😂😂😂 Yeah man that AVC killed me out there 🤣🤣 learned my lesson bro
Thomas..”it will still pop wheelies” hahahahahahahahahahaha
Haha 😂😂😂😂
That was nuts! I don’t think anything could survive that landing but good grief! Sick video!
Xmaxx some of the time can
Thank you so much brother! Man this session was brutal 🤣🤣🚀⚡️⚡️⚡️
The headless Outcast LoL 🤣. Dayyyum! Bruh! That was nuts!😂. Crazy session brother.
Haha yes it was such a brutal smack down bro! Definitely one for the books 😱😂😂😂😂
Great video Thunder! Ya push them cars to their limits!
My buddy picked up a non exb Kraton 6s and ran into a light pole at a slow speed. Probably less than 20mph? The whole car was destroyed. He needed to buy a roller. So many parts were busted. This was the Kraton's first and only crash. Legit, I was at his house when he unboxed it
My maxx has hit trees, walls, and rocks at full pin. It has only ate trough that thin hub bearing that was rough since the day I bought it. That bearing took the end of the drive shaft. Less than a 15 dollar fix and 5 mins at the bench it was good to go.
Thanks so much brother! 🔥🏆🏆⚡️ Yeah man the Maxx is a super tough truck! One of the worlds strongest for sure!
⚡️🏆⚡️🏆⚡️🏆⚡️🏆⚡️🏆⚡️ NO WAY!!! That was absolutely Gnarly!!! I think the front and rear wheels touched each other! Incredible driving as usual buddy! And the little XRT that could! Awesome Thunder!!!⚡️🏆🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Haha yeah brother that was world record slam for the books 😂😂😂😂 Funny thing is I ordered a new chassis a week ago and it showed up yesterday 😂😂😂 I rebuilt the truck in a hour and 30 minutes and it is fixed 😱😱😱💯👍
@@thunderrc Dude your an animal! You inspired me to go shred! Amazing how fast you are at building! Your Epic!⚡️🏆🚀🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
@SpeedSyko Thank you brother!⚡️⚡️⚡️⚡️⚡️⚡️⚡️🏆🏆🏆🏆🏆🏆🏆 Go shred it today my bro!🔥🔥🔥
Almost a yard sale day 😂👍👍 great video ! Oh ,!!! Nice shirt !
Haha yes it was a yard sale day 🤣🤣🤣🤣🏆 Thank you brother!
Some gnarly hits taken today ... Wrench time , then rite back at it ... keep makin these rad videos ....
Arrma tough baby... but the chassis didn´t bend. That means quality! Poor outcast, poor Thunder... I feel you!
Haha yes that Outcast is awesome 💪⚡️⚡️⚡️
It’s true if it just bent like a pretzel , that would mean that Arrma is not heat treating their 7075 / T6 chassis.
Only thing we have consistently broken on the XRT is the Steering bellcrank, but that was only when THEASHING it to death with huge air and BAD landings. Problem has been resolved with the one available from M2C racing. Some guy we didn’t know broke the hex on one of the wheels, said it happened when he smashed into a light post in a parking lot. I have stuffed the X-MAXX and XRT into the ground or straight into rocks, trees, light posts etc. I’m not going to lie & say they never break, of course they break, but more often than not they are fine. Parts are cheap enough to keep a good selection of spares on hand. In the end it’s the brand and model that puts the smile on your face.👍🏼🔥🏁
Arrma doesn’t use 7075 thay use some Chineseium😂😂😂
Haha 😂😂😂
Brutal bash session 👍
Pound for pound Rocky N Thomas
The XRT has never taken such a beating before and it held up Wicked tough🆗💯💯 wicked bash session
Yes the XRT slayed it out there bro! Thanks my dude! It was an awesome
Bash!⚡️🏆🏆💯💯💪
Dude that was gnarly for sure!😆Killer jumps with both rigs! The Traxxas took some nasty's too but damn Dude the Outcast breaking in half was rough!! Looks like you need a M2C chassis on that one now! Driving the rear half was hilarious!!
Thank you so much brother! Haha man that was some serious carnage yesterday for sure😱😂😂😂 Yes the chassis needs upgrading no doubt but I do have to say I am very impressed with the new Arrma parts on this truck. This thing has definitely taken a major kicking 💪⚡️ Hope you and the family are doing awesome bro! I need to get over to your channel and see your new vids! Been so busy lately with life, you know how it goes.
Crazy how the difference between a clean landing and total destruction is one Milla second of throttle.
Haha yes time is everything 😂😂😂🤣
My outcast gets here tomorrow. The new king!!! Now you flipped back to all it drives good but the xrt is a better basher? 🤦♂️ why do I even bother watching. People come to the channel because you put the trucks through the paces but once you start flip flopping people stop watching because they get confusing info. Now I’m torn, was a xrt a better basher? I wanted something 5th scale. The best but now I’m clueless!! I’m about reliability in as bashing toughness
@@luisfontanez1770the Outcast and Kraton are better bashers. I’ve broken tons more parts on my Xrt than my Kraton. Literally had to put $3k into it to just equal the durability of the K8s exb.
I didn’t have to swap my chassis on my K8 but I did for sh!ts N’ gigs.
All in all I have $2100k into my Kraton and $3200+ into my XRT.
@luisfontanez1770 For Good landings I'd give the advantage to the arrmas for speed height and Maneuverability. But when it comes to horrible bad landings the xmaxx/ xrt will walk away way more often than a Arrma. I always tell people if you enjoy dumping money into your rc cars and enjoy major overhauls and making regular repairs (basically ever big air session) pick Arrma. If you don't plan on big air or death ramps. Traxxas will give you almost a maintenance free experience.
I'm a Arrma fan boy and enjoy big air. I always build x-maxxs and end up selling them. I always keep Arrmas around. But I also understand I will be breaking them and working on them. But it's also what I enjoy doing almost as much as the bashing aspect.
2 and a half months,sledge outcast exb 8s just unboxed and xmax 8s. I’m googling how to bind remote. So yeah haven’t land a backflip yet with my sledge and I’m over 4k $ In the hole 😂 🤦♂️
EVEN broke in HALF it still RAN,,,,,insane...great Vid ...thanks Momma Thunder and friends to...
Haha yes that Outcast put up an insane fight!😱🤣🤣🤣 Thank you bro!
It was hard to watch you "robocop" that Outcast!! 😢 Poor unit... But holy crap, it took literally like 1000 monster smacks off the death ramp!💪 What a rig!! 💯🤘
Absolutely Nailed the shot of the nose dart into the concrete! That was a nasty hit brother! good work!
Haha yeah bro that slam was not my plan at all 😱😂😂😂 but hey it happens to the best of us. That is one slams for my record books 😂😂😂💪
@@thunderrc indeed it was!
After dozens of hours of brutal bashing and jumping harder than anyone else on YT, you finally managed to seriously break something, thats some absolutely insane durability.
Yes it speaks volumes for the new Outcast 8s V2 💪🚀⚡️⚡️🚀 This truck is a true champion!
Give props to the XRT.. Took a helluva lot much more punishment and left in one piece. EXB: EXtremely Broken! 🤣😂🤣 Arrma tuff baby!!! 🤭
You have clearly never watched RCdude 81
That was worse than the Hindenburg accident. Seeing the wreck in slow-mo was horribly gut-wrenching; you can see the energy shockwave pass thru the Outcast. Well, time to get a new chassis. I guess the outcast is out of commission for a little while. And that was more like you snapped the front Quarter of the RC. She snapped at the weakest point where all those endpoints converge at the thinnest spot and there are so many bolt holes. But it looks like you had a lot of fun out there with our newest friend from Germany. Tell our friend: "Hallo, guten tag!?!" for us please. As Bill and Ted would say: "I hope y'all are having a most excellent day." If he is still there this weekend, maybe we 3 can get together for a crazy bash session. Of course, Mama Thunder is invited, too. Lol. Ha ha ha.
Haha bro it was the gnarliest bash yet man!!! We wish you would have been there man! Will do brother! See you soon!💪🏆⚡️⚡️💯🔥🔥🔥🔥🔥🏆🏆
He is here for 2 weeks brother 👍💪⚡️⚡️⚡️
I can’t wait to watch this! I’ll tune in later! Have a blessed day y’all! Happy bashing!
Thank you brother! I hope you have a great day bashing man! I’m a work grinding away trying to pay for parts 😂😂😂😂😂😂
@@thunderrc haha yeah I feel yah. Things didn’t look good from the thumbnail😂
That's the hardest part of rc. When you break your toys and have to watch your friends play with theirs
Haha yes it truly is 🤣🤣🤣
That was so brutal but died laughing at the end. Looked like the zombie version of an rc! 😂
Haha yes it was like a zombie crawler 🤣🤣🤣🤣🤣
Very fun! The gal add a lot to it❤ Love the sound effects!
Thank you so much!😱🚀🚀🚀
Hello Germany, guten tag 😊
Couple great crashes, 👍
🚀💯💯💪⚡️
This is the equivalent of watching the Pain Olympics.😂
😂🤣⚡️💯😂⚡️
Brutal bash on the big beast ... took it well up to that point .... 🔥🔥
Yes it surely did! That truck is amazing!🏆⚡️⚡️💯💯
That’s a day of destruction right there! That was one heck of a show!👍👍😁😎✌️⚡️⚡️⚡️⚡️⚡️⚡️⚡️💥💥💥 great job to all of you!👍😁
Haha yes it surely was bro 😱😂😂😂🤣 Thank you brother!
That is CRAZY!!! Cant blame the remote on that one haha. Glad you got it fixed back up in the end! Awesome video!!!
Haha yes 😂😂😂😱😱😱😱
it might have snapped but chassis still looked straight 💪 always one thing i turn off on any kind of rc car, the AVC! i call it the AFC - Anti Fun Control 😅
Haha no doubt bro 🤣🤣🤣 I learned my lesson on that 😂😂😂
Wow brother this carnage❗⚡❗⚡❗
Rip Outcast V2💥
XRT Is a beast 💪🏆
Mdr Driving the Outcast V2 half 😂
Great extreme bash session guys it was great
Thanks mom Thunderrc for these crazy images 👍🌒
Haha it was a crazy session brother 🤣🤣😱🏆⚡️⚡️ Thank you man!
Yay!! You’re welcome! It was great fun!
The fact that it still ran afterwards makes it more insane!!! I think on the next round it’ll be unstoppable
Haha yes I love this truck bro! The thing is a complete monster😱⚡️⚡️⚡️💪😱
Insane! Wow. O8lasted after all the destruction previous vids though too. That seems like cumulative fatigue on the chassis.
Haha yes most definitely brother. This truck is a true champion 😱⚡️⚡️💯💯
Your mom’s like Shucks. 🤣 😂 lmao
🤣🤣💯💯⚡️⚡️
Wow, that Arrma got destroyed really good. Nice jumps again. ⚡⚡⚡
Jeeeesus 😳 That was some insane carnage bro 🔥
Jesus is Lord forever! Praise Him👑🏆 Yes it was brutal out there today man! Haha that was not my plan for this bash but oh well 😂😂😂 Death Ramp won today 😂😂😂
That’s called a Varial bro. I used to pull that trick off the diving board at our local complex. 👍😊
Have to add one more comment. In all fairness that poor Kraton took MAJOR abuse before it gave up the ghost. That chassis snap is from fatigue. Like bending the tab on a soda can back & forth, back & forth until it breaks off. I personally prefer Traxxas (sorry people) but the Kraton 8S V2 “AINT NOOO JOKE” so if you own one, your rollin with one of the very best.
Another awesome vid⭐️⭐️⭐️⭐️⭐️
That is one of the most brutal hits I’ve ever seen 😂
The Outcast will return, faster stronger!
Yessir it was so brutal! 😱🤣🤣🤣 She is already back better and stronger than ever!🏆🏆🏆
Damn! You hammerd them bro. I felt the sad vibes through the video on that last outcast hit! Hope you get it fixed soon 👊
Haha yeah bro Thunderstruck down hard!🤣🤣😂⚡️😱 All good man, it is called the death ramp for a good reason
Greetings from Bavaria/Germany
Thank you for watching 👍🚀🔥💯⚡️⚡️
That sound it made. SPLAT!!!!
That sounds was horrible 🤣🤣🤣
Man for the amount of beating that outcast took over again and for it being stock I’d definitely go with the outcast for sure best bang for your buck by far buddy!
Yes it is an amazing truck bro! I love the Outcast!⚡️⚡️⚡️⚡️⚡️🏆🚀
Outcast has a beat up history on it
we had such a blast. Round 2 coming up today.
Yes we did! You did awesome out there my brother!💯🏆⚡️⚡️🔥🔥🔥🔥🔥
Lawn dart onto pavement off death ramp...death landing. Not sure many stock chassis would survive that! It did survive a lot of big jumps from previous vidoes tho! I wonder if fatigue of the aluminum helped lead to that chassis snapping 🤔
😂😂😂she said, "You can't blame that on the remote 😂😂😂 make those t-shirts
Haha yes that is Guinness brotha!🤣😱😱🚀🚀💯
#NotReal7075 😂😂
I KNOW a M2C Chassis would have maybe just bent... Who knows.... That was brutal took chunks of Concrete out😱😱
That 7075 Arrma uses us better than stock, but nothing close to even what Corally uses, and M2C is next level with the certifications they have to the quality.... But EVERYTHING has its limits.
Bro that was insane, that avc was causing some crazyness... And that ramp, you gotta send it without a risk to concrete landing....reposition or something. That XRT took some crazy hits though to be fair.
You pulled some crazy front flip recoveries😎👍.... Some of that was the avc helping but AVC is like 80% it's gonna screw ya when pulling wild stuff like that..... It's guessing what your trying to do and can be often wrong as you know, we all never use it when sending sucks that you caught after some brutal hits.
Great video, your bro was landing some suck stuff as well, that's always fun!
Haha thank you my brother! You are exactly right my dude! M2C chassis would have bent for sure but maybe not have snapped. That hit was like Thanos with the gauntlet slamming down on the outcast!😱😱😱😂😂😂😂🤣🤣 Good news is that I had a new chassis and I have already fixed it my dude! Arrma tough 💪🔥😂😂😂🏆I hope you have an awesome day!
Honest straightforward thank you . Arrma is still using bad quality 7075 aluminum for these chasis. Really unfortunate
The chassis is super tough bro. Trust me, nothing would have survived that man 💪🏆😂😂😂😂
Playing pavement darts is obviously mass destruction... my my my what a torture session lol
Haha yes you are right 🤣🤣⚡️⚡️⚡️ It was crazy out there!
awesome bash 💯👍👍💥🔥
Ouch what a landing 😳
Just one more he says.......gets me Every. Single. Time lol
😂😂😂
7:04 Agreed Julia😊😊
7:50 "Yes way","Yes way","Yes way" he sure did.😜😆😜😆
8:09 But take into consideration that crash didn't break the plate it actually looks like it broke off from the front that wasn't protected by that plate Rocky it sure took a ton of abuse and eventually the impact had to go somewhere?😢
10:03 Interesting enough it could be your "Wheelie" only truck? 😂
15:32 Exactly seeing is believing It snapped off at the weakest part of that plate.😮
Both you&Thomas put both of car's through their limits on the Death Ramp 👍😎👍 Also I must say another fantastic"AWESOME!!"&"GNARLY!!" job for your camera lady Julia AKA MAMA THUNDER for the epic footage and editing on this video👍😎👍😎👍😎👍👏👏👏👏
Thank you so much bro! Haha that poor Outcast has been through so much abuse man, I’m not even disappointed. The truck has way past my expectations and I love it 💪🏆⚡️⚡️⚡️
Haha you’re welcome my friend!!! And nope !! He can’t blame that nasty crash in the remote hahahaha Have a great evening!👍😊📸
@@juliachatwell You too Julia😘😁😘
Go on Rocky💥🤩 get another Xrt🤩😃
And let’s see what it do
Yes I want too!⚡️⚡️💯🏆🏆
Just wondering was the rest of the chassis still straight?
Haha yes it actually was 🤣🤣🤣
I still think the outcast is the top dog! I can’t believe the slams that xrt took though. I thought it woulda been broken off that first one he did!! Very surprised actually haha. Glad you got er fixed bro! Can’t wait to see more of this thing.
Honestly from all the bad slams not too much broke. The chassis was surprising but it ain’t m2c so who knows what it’s actually made of lol
Haha thank you brother! Yes I love that Outcast man! The truck is pure awesomeness bro🚀🏆⚡️⚡️💯💯
@@thunderrc ya bro it looks awesome! I’m excited! Will be a good day when she comes :)
Hey thunder that V2 OUTCAST 8S is crazy insane, it seems way above the V1 bro 👍
Well done to your mate as well he had a mad bash with the xrt too 💯
Its the same as the v1 buddy ( Read EXB Roller ) you get new electronics, bigger tires.
Yes it truly is a beast bro!😱⚡️⚡️⚡️⚡️
Your Chassis Broke after such little soft jumps? I would call Arrma and use the warranty! And show them your video to proof that it was not your fault !! 😆
Haha yes I should 😱😂😂😂
F that! 🫣🍻 not crappy driving! They just can't physically take that . ⚡
Thunder babe was right! "You can't blame it on the remote"
Blame it on the thunder ramp !!!
You need to look into a "thanks" button for donations 🫣
I've given " earl moorhead" a couple hundred by a push of the button
Haha yes you are right 🤣🤣🤣 Death Ramp is gnarly bro
Have the v1 and love it with the 800kv hobbywing. Where can we get the shirts?
Also can we get a rebuild video I’d love that.
Thank you brother! Yes I love my Outcast too! I need to order more shirts. I will be starting a merch soon 👍 I need to do some wrenching videos soon as well
This is a great video, kinda shows the massive difference between you and a regular person too. I dont know what it is but im feeling less impressed with the XRT now. just seems like a big lump thats very tough. Feels like the two options now are outcast or Xmaxx
Yes the Outcast and Xmaxx are awesome. Both of my favorite trucks right there 💪🏆🏆🚀⚡️⚡️
The XRT content was sick to watch
Yes it truly was!😱😱😱⚡️⚡️⚡️
Dam ! No car would of took a direct nose landing that hard ! For the chassis to have a a clean snap like that without any other bow or bend anywhere else proves to me that they have definitely improved the quality !. Its a shame you misread that landing bro itherwise she would be still kicking.
Yes you are exactly right bro. No car would have survived that hit 😂😂😂😂😱 I love this Outcast man!
That controller on avc was making you look like you forgot how to drive 😅glad you noticed it was on got to see the real thunder skills your friend was struggling with the death ramp that xrt took some hard hits I'm impressed that it survived fun stuff brother thanks for the intertainment 👊
Haha I felt like I lost my skills out there 😱🤣🤣🤣 Thanks AVC
Thunder RC Winner First in the world for crushing outcast 8S 😂 👍
Haha thank you brother!🚀🏆⚡️⚡️⚡️⚡️
This makes me want a outcast now 😂😂
I have the best outcast on yt hands down and everything else come on over to BKF racing much LOVE TO THUNDER RC ❤🏁
I’m sure your outcast is amazing bro! That is awesome to hear! 💪⚡️⚡️💯💯 Thank you so much brother!
When you look at the money 💰 that’s involved to buy and to repair and do this as fun is mind boggling
Yes it truly is, good thing RUclips pays me and funds it 👍😂😂
Well, I guess it’s time for an M2 C racing chassis😂💯🇺🇸👊
Haha or just another stock chassis 🤣🤣 it’s cheaper
@@thunderrc i’ll go for that and no hard nose bones on asphalt Nomo😂😂😂😂⚡️⚡️⚡️⚡️💯⚡️⚡️💯👌👊🍻
Epic crazy ,love it, so damn cool
Thank you so much!🏆⚡️⚡️
Time to weld that heavy thing together
Haha that’s a great idea 🤣🤣🤣
Feel the thunder⚡️⚡️⚡️😂
That was narly Thunda, but it looks like u will be getting a m2c chassis from here on. 😂
Thank you brother 💪🏆⚡️⚡️ Already fixed it man!
Hell yeah brother 👍⚡⚡⚡
Thank you so much my brother! Hope your having an awesome day!😱⚡️⚡️🚀💯💯
Plastic is fantastic.
Yes it surely is!⚡️🏆💪⚡️⚡️⚡️
I think this might be your most insane session…EVER!!! I managed to flinch about 30 times and laughed enough to pee my shorts. 🚗 💨 🩳 💦
Haha yea it was insane! Thanks so much bro! 😱😂😂😂⚡️💯💯 More action coming soon!
only XRT or XMAXX for jumping, greetings Thunder
Morning grate beat down
Thank you 👍⚡️⚡️⚡️
Such a beautiful day
Yes it was, and hot!😂😂😂⚡️⚡️⚡️
OMG you are the MASTER BASHER mate 😂
The back wheels actually touched the front wheels on impact - this is a first hahaha
Then driving it with the rear wheels only had me in stitches - man I am on your channel now every day without fail
Haha it was wild out there yesterday brothA 🤣🤣🤣😱 Thank you for watching and the support! More action coming soon!💯💯💯⚡️🔥
Viele Grüße aus Deutschland 🎉
Geiles Video
Thank you bro! Appreciate you watching!⚡️🏆🏆🔥🔥
That was nuts 😀
Yes it was 😂😂⚡️⚡️
Super cool to have a German guest! What is his take on the two trucks?
Thank you! Yes is like both but XRT is his favorite
dude outcast trike!
Haha yeah!😂😂😱
If i had the drawings of that chassis i could design and machine one that wouldn't break. Make it a few pounds heavier but it wouldnt break. It be spendy. Id use 1/2" or 1" aluminum perhaps. Ill look for cad drawings for solidworks. I have a haas vf3 just sittin here atm. I make billet dh ebikes from hell. Cha-ching!
Sounds pretty rad bro!🏆💯💯💯💯😂
@@thunderrc you are solid my brother.
what’s the main difference u think bet the two rig mate.. I’m deciding which to get.. Ths a lot .. yr videos are always dope
To be honest you can’t expect a car to survive being dropped hood first into the road at that height 😂
Haha yes you are right 🤣🤣🤣 Nothing is going to survive that
Sounds like the motor mount got bent and The mesh was rubbing hard on the XRT.
Or just the mesh got jacked. You can definitely hear it rubbing hard.
Too bad we aren’t closer, i want to try my XRT and K12 exb on your death ramp.
Yeah man that XRT was making funny sounds for sure 😱😂😂😂
You need to level out the top of your ramp. It's at an angle in which it turns the truck when you want to flip, making the truck wants to land sideways ish.
Yes the ramp definitely needs some work
That'll polish off 😂😂
Haha oh yeah 😂😂😂😂🥹
I know people will talk trash about the arrma chassis, but I doesn't matter traxxas or arrma or whatever...you send cars hard over and over....you're bound to have issues. Add a bad day of driving which we all have...and you get catastrophic breaks. It's the way it is. I don't care what you have in your car....asphalt nose landings will usually be the nail in the coffin to at least a few parts on a car. The ultimate definition of high risk high reward.
Haha yes this is very true bro 💪😱🏆⚡️⚡️💯😂
Got the Germanic dude in the house. I have some German in me
Awesome brother!🏆⚡️⚡️🚀
That was crazy😮 so what’s the plan for a new chassis?
I already put a new chassis on and she is back bashing like new💪⚡️⚡️⚡️🏆
XRT for the win..! Say what you want about Traxxas and their rigs, but you cannot deny their durability. Had an outcast EXB 8s and it was a good handling rig, but could never take abuse like my XMAXX could. Sold the Outcast and got the XRT and never looked back. Throw some better tires on the XRT, stiffen the shocks and you’ll have the handling similar to the Outcast but with Traxxas durability. I put sledgehammers on mine and it’s ridiculous..!!
Yes both cars are amazing! Sounds like you have an awesome XRT!💯🏆⚡️⚡️