hi Warren this video brings me back to the late 60s when I was a diesel mechanic things were alot simple then it was actually a lot of fun then the government screwed up everything my hats off to you for working on the newer crap
Listening to you talk about the degree of control California agencies have to exert on people reminds me why I moved to Idaho eight years ago. I lived just north of Sacramento for sixty years and finally couldn't deal with it anymore. Never have been sorry I left, even though there are a lot of good people there.
Hello, Warren. I worked building Freightliner cabovers in 1971. One of the first things we learned was always to check what was in the cab before lifting it - stuff left loose in the cab would fall forward and break something, sometimes even the windshield. Also, the dangling licence plate holder in front of the cab would sometimes hang up on the bumper and get bent all out of shape. When putting the cab back down, you had to make sure the clutch linkage was engaged properly, or you could have a truck that could not disengage the clutch. Most trucks went out equipped with 350 horsepower GM 8-71s or Cummins inline 6s, some went out with 903 cubic inch Cummins V8s or GM 12-71s. A few went out with 500-horsepower CAT inline 6s, but the CATs did not have Jake brakes. The GMs were said to need an inframe rebuild after about 300,00 to 350,000 miles, and the Cummins could last to 400,000 to 450,000 miles before an inframe, since the engine oil available was not yet improved to allow million-mile engine durability.
That is what I was told about the CAT engines by the guys at the plant. These engines were big motha inlines, but not overly tall since they had no Jake heads on them. I assume they were from CAT bulldozers or earth-moving machinery, but I was not told anything else about what machinery they came from. I was told that they had a rather ineffective retarder system that threw engine oil against a flywheel, and that there was no Jake or Pacbrake system available for them at the time. The trucks with GM or Cummins engines went out with Jake brakes installed, and almost all with Roadranger transmissions. A few (very few) went out with some other sort of manual transmission installed, and a few went out with air conditioning. I was surprised that trucks would be ordered with fancy paint jobs or extra chrome but not with air conditioning. @@timcanizares5240
The good old days I used to work for a Matlack tank lines in the 80s fleet Mack’s And freightliners that’s when you had a real trucks and real drivers no crybabies. Thanks, Warren.
Welcome to the world of being shit on ! It's always the working man that is on the bottom of the outhouse hole !!! You are a great man, keep up the good work !
3:11 yeah, when I seen that headache rack so close to the cab I remember those jam points on the locks. Good times.😂. I also recall about 50% of those pumps with leak like a siv so you had to pump them like you stole them until the locks kicked in. I was so grateful when they finally came up with an air over hydraulic pump for those units.
Pumping that cab up would be a good alternative to the gym for your wife lol. I've heard you saying she likes to go to the gym, and have told her she should come work with you and she'll get a workout, this immediately came to mind. Thanks for the video, and you are right about that electric truck bs, but they also want people in general crammed in a city using public transportation, a train, but mainly walking. They'd like us in a smartass city for control. G-d bless.
Warren,I see the Pete’s gone, I couldn’t think of one soul other than you that would tackle it until it was right,I appreciate your work,right now I see this cab over,jus like you said ,easy money, catch me in next vid.
That Freightliner brings back a lot of memories. First time i watched someone jack up a cab a two quart Stanley thermos rolled off the bed and broke both sides of the windshield. I didn't like driving them because it felt like the left steer axle shock absorber was mounted to the bottom of the drivers seat. I wasn't thrilled with the notion of being the first person to an accident either. Best Wishes to You and Your Family for the Holiday Season Warren. Thanks for sharing.
We all have to suffer because California has an ingrown toenail. Always had a anti smoke fitting plumbed into tank when BC 4 was in shop. Sad to see the junk that is replacing these old work horses. Thanks again for sharing Warren. Merry Christmas and a Happy new year to you and your family.
I love seeing you work on the old classic stuff! I bet it’s a nice change from the Paccar. Cool story to hear about being a kid watching it. There were trucks around home I remember too.
A lot of us really appreciate you making these videos, Warren. They are incredibly informative and vicarious. When I was younger, I operated equipment, and turned wrenches, but with nothing like your experience. If one has never worked on equipment, especially big heavy dangerous equipment, one has no idea the strength, energy, tenacity, and resourcefulness required. You rock. By the way--your rant: Yup!
Another Great Video, Warren. Those Old Cabover Trucks were pretty cool and all over, now they are highly sought after and bring big money. The only electric truck I would own is an Edison Motors truck, still qualifies as electric, but has a diesel generator. They seem to be a great group of guys behind the company and make common sense. I appreciate the videos and the common sense rants. California is getting rid of some good old reliable trucks, you couldn’t pay me enough to go all electric for a service vehicle. Electric may be a good idea but the battery technology is not there yet. The infrastructure that is needed to make that move is also nowhere near ready. Leave it to Government to mess up a wet dream. Thanks Again, Warren. You and your family have a Merry Christmas and a Happy New Year.
Thank you for the video Warren, 👍 your happy times are good times in the 80s. mine's were mixed, especially mom, struggling to afford to look after me and my sis in the 80's.
Hey Warren, gotta love "old school", get in, getter done and get out. No laptops or cam buss crap just simple skills and knowledge (books help...lol). Thank for the share, stay safe Sir!
See Warren you just taught me something, using a laser temp gauge is brilliant. I'm not afraid to admit I don't know everything. I learned on this channel period, can't wait till you put up a new one. FLD parts will fit those old cabovers usually.
Warren, love your videos. I am surprised that you haven’t packed your stuff and left Commifornia yet. I suppose its family and I understand. But man they are trying hard to not make it livable there any more. You would not have a hard time making a living anywhere in the country with your skills
What a beautiful old Freightliner, Warren. The owner looks like he takes very good care of that truck. Thanks for sharing such an awesome piece of trucking history.
Hey Warren, probably fun working on the old stuff huh. Easy to diagnose but maybe a little hard to find parts for. Great job. Thanks for sharing your video.
My atate is opposite, they allowed huge trucking companies to exist on residental land, without variance or zoning change. In addition to all of that they didn’t even require a buffer zone. Thats my state for you!
Thanks for sharing another great episode Warren, that old cab over is my year model. Like you said they don't make em like they use to. Go like hell until your all wore out and then go some more.
Supposedly the next couple years in California the biggest motor you can get is a 13 litre. Without paying some 20,000 dollars fine. You’re 100% right, just to suck more money outa people. Glad I ordered another 16 liter a few months ago.
I have a 71 cab over and the jack would leak down faster than I could pump it up, tried to fix the pump and resealed the cylinders still had trouble finally bought an aftermarket pump and put on it works great now
First thing you do before you jack up a cabover is check the cab for shit that will go through the windshield. Then you can jack it up. My first truck was 72 freightliner cabover with 8v 71 318 with a 13 speed and 44.4 rears big bunk. 22 years old, and I was in tall cotton. 69 now man alot has changed. I had Cummins 444 with the step timing control. I always set the overhead like the old big cam 1 engine. Never had any problems and was running coast to coast.
Enjoyed seeing you working on a good ol big cam I just love them motors lol always enjoy your videos man and have learned some tips and tricks. Thanks for sharing keep up the good work God bless
I appreciate guys like u still working on this old stuff I like to see more that does this Like to see more engine detail on big cam 3 motors adjustments and such not to many out there anymore Thank you
Yep...jus like my old '74 Chevy Titan with a 335 Cummins and a 13 speed. I tore it down and put head gaskets, injectors, and a thermostat in it once....learned a lot about protectin them injector tips. 🙄 Wuz a good old truck with a differential lock which wuz right handy. It made a few trips up your way haulin drill pipe. Don't see too many of em anymore. Anyway Warren, we wanna see that smoke gone and see it haul that hay. 😁
Rode in one of these trucks in 1978 from LA to Phoenix in August. Hot miserable bumpy ride pulling a set of doubles through the California/Arizona desert. Temps in the hot time of day was about 120 with afternoon thunderstorms to cool the place down to around 95. The truck ran fantastic the entire way even the trip back to LA. I think it was a road ranger trans 18 speed. It was super hot in the cab during the heat of the day, I removed my shirt and pants and drenched myself with a canteen of water to get some relief. It had 260 air, 2 windows down at 60 mph.
On some of the freightliner trucks the air system has to have pressure before the air comes out of the vents in dash I have run in a bunch of them that way when I am fixing air conditioning systems and will air system messing around with the bad air dryer it may not maintain the right pressure. I was taught with the big cam 855 Cummins to set the valves just like any other 4 stroke diesel engine on number 1 TDC you can set half of the valves and then turn a full turn to number 6 TDC and set the other half and then go thru and set the injectors exactly like you did I had a big cam 4 non STC industrial engine that sounded and smoked like that truck and I put new injectors and I had to hunt around to find a old Cummins diesel mechanic and he came and showed me his method and it just purred nice when I was done and it went from 20 gallons of fuel per hour down to 16 under full load it was in a John Deere self propelled corn chopper and with 8 rows of corn going thru it was all it could handle set at 400 horsepower. Keep up the great videos
Great video Warren really enjoy watching you work on this Freightliner and troubleshoot the list of problems with it. Looking forward to your next video stay safe Warren.
Always amazed me how better they would run after a top tune , I can't remember which engine it was maybe NTC350 you gently pried down the injector to empty it of fuel before setting it with the inch pound torque wrench. At least with the COE nice easy access on all cylinders. Always check what's in the cab first before tilting and what's in front of it once it goes over center. Cheers.
if trouble with "inner base circle " pull out your inch pounder and work outter base circle . that makes certain the plunger is fully DOWN as these injector have no Poppet to close end of injection , just pintle at or near fill bottom
Warren is the type of dude I'd work for. I'm surprised you actually need a book all top stop injectors are tuned the same you do it at the valve overlap setting or top dead center
Mornin feller...was just watching an old video of yours...not that anyone gives or should give a f@#k about what i was doin.....and you're exactly correct..have a good day man👊
Thank you sir, enjoy the trouble shooting aspect of your videos. Years ago I talked to a cab over driver and he loved the cab over and the only thing he wasn’t fond of was that if he were in a head on or any collision involving the front end the idea of literally being the first one to the scene of the accident didn’t really appeal to him.😊
Those blower motor switches are still available from Freightliner, although the typical parts guy probably can't figure out how to look them up. I just replaced one in my FLC last year, same switch that cabover uses. That old iron is good stuff, it just works. Cheaper to pay the ticket for running it into Cali than to buy a brand new truck you can't keep on the road.
Your not ranting! Your speaking facts!!. People in this country need to put there petty differences aside stand up join together and put a stop to these tyrants we call leaders (on both sides). Oh and by the way im not speaking about violence so dont even try it (message to the feds watching).
Hey Warren, I had a old guy learn me that your thumb and index finger is worth 5 to 6 inch pounds ,I bought a snap on tougemeter dial type wrench and I was suprized ,it was so ,,hope this helps and don't piss anyone off
I have a small cam Cummins used in a 250kw generator with 1300 hours. It was installed in a tv transmitter for CBS in 1968. Spent entire life in climate controlled environment. Never had a cold start is anybody interested in the engine and or generator. It resides in Pennsylvania .
I remember these I started in a 64 and 65 with 318 Detroits in them. Also saw several jucked up in the back row of the truck stop and the driver and the lot lizards rolled out on the windshield 😂😂
I'll always have a soft spot for these old cabovers, good to see'em still on the road. Back when a truck was built to do a job, not be a computer powered, rolling air purifier that costs more to maintain and fix than it makes. 👍
Hello Warren. I used to live out in the stick's and when I retired I had to move in to town. I keep a low profile and I keep out of the way of people. Otherwise they tell you what you can and can't do. I hate having live in town. It's because of being a diabetic and having bad legs. If it wasn't for my condition. I would be out of the town tomorrow. I don't know why people can't leave me alone.
I was taught when setting valve lash to have the min and max feeler gauges out, test the small first if it doesn’t fit adjust till it does, and the max doesn’t and the opposite if the max fits, that way you only need to adjust valves that are out of spec. Though I guessed it doesn’t hurt to be thorough
Hi, IF you get chance over the holidays, watch this guy Warren .... Bruce Wilson he play's about with some Scania's over in Sweden when he visits from the US.
I completely agree, it is all about control man. You aren’t free to do whatever you want, you must obey big brother is watching you. We are only as free as they want us to be. Thanks for the video, I’m working on my 1980 Freightliner Cab Over and unfortunately my front drive axel has some milky gear oil and slight metallic residue in towards the bottom of the fluid, been sitting for awhile so hopefully everything is okay in there, going to run some good fluid in it and go from there. Do you know if the meritor rears need limited slip additive with the gear oil by chance? I was told I have hard to find parts type of rears being the 10 smaller bolt axels 😞
hi Warren this video brings me back to the late 60s when I was a diesel mechanic things were alot simple then it was actually a lot of fun then the government screwed up everything my hats off to you for working on the newer crap
Listening to you talk about the degree of control California agencies have to exert on people reminds me why I moved to Idaho eight years ago. I lived just north of Sacramento for sixty years and finally couldn't deal with it anymore. Never have been sorry I left, even though there are a lot of good people there.
Hello, Warren. I worked building Freightliner cabovers in 1971. One of the first things we learned was always to check what was in the cab before lifting it - stuff left loose in the cab would fall forward and break something, sometimes even the windshield. Also, the dangling licence plate holder in front of the cab would sometimes hang up on the bumper and get bent all out of shape. When putting the cab back down, you had to make sure the clutch linkage was engaged properly, or you could have a truck that could not disengage the clutch.
Most trucks went out equipped with 350 horsepower GM 8-71s or Cummins inline 6s, some went out with 903 cubic inch Cummins V8s or GM 12-71s. A few went out with 500-horsepower CAT inline 6s, but the CATs did not have Jake brakes. The GMs were said to need an inframe rebuild after about 300,00 to 350,000 miles, and the Cummins could last to 400,000 to 450,000 miles before an inframe, since the engine oil available was not yet improved to allow million-mile engine durability.
I hope there was nothing left loose in the cab at the assembly plant of brand new trucks…
Was wondering about that
500 hp CAT??
That is what I was told about the CAT engines by the guys at the plant. These engines were big motha inlines, but not overly tall since they had no Jake heads on them. I assume they were from CAT bulldozers or earth-moving machinery, but I was not told anything else about what machinery they came from. I was told that they had a rather ineffective retarder system that threw engine oil against a flywheel, and that there was no Jake or Pacbrake system available for them at the time. The trucks with GM or Cummins engines went out with Jake brakes installed, and almost all with Roadranger transmissions. A few (very few) went out with some other sort of manual transmission installed, and a few went out with air conditioning. I was surprised that trucks would be ordered with fancy paint jobs or extra chrome but not with air conditioning. @@timcanizares5240
The good old days I used to work for a Matlack tank lines in the 80s fleet Mack’s And freightliners that’s when you had a real trucks and real drivers no crybabies. Thanks, Warren.
I had a 1989 Freightliner Cabover with a 350 big cam II with a 15 speed it was that exact green as the one in your shop.....it was a beast
Welcome to the world of being shit on ! It's always the working man that is on the bottom of the outhouse hole !!! You are a great man, keep up the good work !
3:11 yeah, when I seen that headache rack so close to the cab I remember those jam points on the locks. Good times.😂. I also recall about 50% of those pumps with leak like a siv so you had to pump them like you stole them until the locks kicked in. I was so grateful when they finally came up with an air over hydraulic pump for those units.
Pumping that cab up would be a good alternative to the gym for your wife lol. I've heard you saying she likes to go to the gym, and have told her she should come work with you and she'll get a workout, this immediately came to mind. Thanks for the video, and you are right about that electric truck bs, but they also want people in general crammed in a city using public transportation, a train, but mainly walking. They'd like us in a smartass city for control. G-d bless.
Warren,I see the Pete’s gone, I couldn’t think of one soul other than you that would tackle it until it was right,I appreciate your work,right now I see this cab over,jus like you said ,easy money, catch me in next vid.
That Freightliner brings back a lot of memories. First time i watched someone jack up a cab a two quart Stanley thermos rolled off the bed and broke both sides of the windshield.
I didn't like driving them because it felt like the left steer axle shock absorber was mounted to the bottom of the drivers seat. I wasn't thrilled with the notion of being the first person to an accident either. Best Wishes to You and Your Family for the Holiday Season Warren. Thanks for sharing.
We all have to suffer because California has an ingrown toenail. Always had a anti smoke fitting plumbed into tank when BC 4 was in shop. Sad to see the junk that is replacing these old work horses. Thanks again for sharing Warren.
Merry Christmas and a Happy new year to you and your family.
I love seeing you work on the old classic stuff! I bet it’s a nice change from the Paccar. Cool story to hear about being a kid watching it. There were trucks around home I remember too.
A lot of us really appreciate you making these videos, Warren. They are incredibly informative and vicarious. When I was younger, I operated equipment, and turned wrenches, but with nothing like your experience. If one has never worked on equipment, especially big heavy dangerous equipment, one has no idea the strength, energy, tenacity, and resourcefulness required. You rock.
By the way--your rant: Yup!
i hope everyone at carb walks to work to set an example!! or walk the plank either or! warren god bless merry christmas !
Another Great Video, Warren. Those Old Cabover Trucks were pretty cool and all over, now they are highly sought after and bring big money. The only electric truck I would own is an Edison Motors truck, still qualifies as electric, but has a diesel generator. They seem to be a great group of guys behind the company and make common sense. I appreciate the videos and the common sense rants. California is getting rid of some good old reliable trucks, you couldn’t pay me enough to go all electric for a service vehicle. Electric may be a good idea but the battery technology is not there yet. The infrastructure that is needed to make that move is also nowhere near ready. Leave it to Government to mess up a wet dream. Thanks Again, Warren. You and your family have a Merry Christmas and a Happy New Year.
1st company I worked for after high school in the mid 80s ran only Cummins running the valves was the 1st thing I learned love them Ole Cummalongs
Really nice looking Freightliner 😊
first for once! im not a truck mechanic but looked forward to your vdeos for years to learn more bout automotive systems etc.
Thank you for the video Warren, 👍 your happy times are good times in the 80s. mine's were mixed, especially mom, struggling to afford to look after me and my sis in the 80's.
Hey Warren, gotta love "old school", get in, getter done and get out. No laptops or cam buss crap just simple skills and knowledge (books help...lol). Thank for the share, stay safe Sir!
California, UNBELIEVABLE
engine serial number is stamped on the driver side rear of the engine block near the last head on a flat machined surface.
It’s nice to work on something simple for once! Thanks Warren!!
as allways another great vid, from the fixer
See Warren you just taught me something, using a laser temp gauge is brilliant. I'm not afraid to admit I don't know everything. I learned on this channel period, can't wait till you put up a new one. FLD parts will fit those old cabovers usually.
Well, it's really a passive IR temp gauge. The laser is just to help you aim, it has nothing to do with measuring the temperature.
Can’t wait to learn how rebuild the jake’s. My big cam jake’s are terrible too
Warren, love your videos. I am surprised that you haven’t packed your stuff and left Commifornia yet. I suppose its family and I understand. But man they are trying hard to not make it livable there any more. You would not have a hard time making a living anywhere in the country with your skills
He doesn’t live in California,lives in Oregon
You fixed the sound warren your the man I've missed watching your channel keep up the good work man
What a beautiful old Freightliner, Warren. The owner looks like he takes very good care of that truck. Thanks for sharing such an awesome piece of trucking history.
Great to see you work on the old cabover Warren thanks for the video
Hey Warren, probably fun working on the old stuff huh. Easy to diagnose but maybe a little hard to find parts for. Great job. Thanks for sharing your video.
My atate is opposite, they allowed huge trucking companies to exist on residental land, without variance or zoning change. In addition to all of that they didn’t even require a buffer zone. Thats my state for you!
Thanks for sharing another great episode Warren, that old cab over is my year model. Like you said they don't make em like they use to. Go like hell until your all wore out and then go some more.
Supposedly the next couple years in California the biggest motor you can get is a 13 litre. Without paying some 20,000 dollars fine. You’re 100% right, just to suck more money outa people. Glad I ordered another 16 liter a few months ago.
California is a joke
I love watching you on this old stuff that is what I cut my teeth on they are simple
Thanks for the video Warren. just love watching your videos.
I have a 71 cab over and the jack would leak down faster than I could pump it up, tried to fix the pump and resealed the cylinders still had trouble finally bought an aftermarket pump and put on it works great now
First thing you do before you jack up a cabover is check the cab for shit that will go through the windshield. Then you can jack it up.
My first truck was 72 freightliner cabover with 8v 71 318 with a 13 speed and 44.4 rears big bunk. 22 years old, and I was in tall cotton. 69 now man alot has changed.
I had Cummins 444 with the step timing control. I always set the overhead like the old big cam 1 engine. Never had any problems and was running coast to coast.
You are the last of a dying breed Warren, none or few left like you with your work ethic and problem solving ability. 👍🏼
Enjoyed seeing you working on a good ol big cam I just love them motors lol always enjoy your videos man and have learned some tips and tricks. Thanks for sharing keep up the good work God bless
I appreciate guys like u still working on this old stuff I like to see more that does this
Like to see more engine detail on big cam 3 motors adjustments and such not to many out there anymore
Thank you
Yep...jus like my old '74 Chevy Titan with a 335 Cummins and a 13 speed.
I tore it down and put head gaskets, injectors, and a thermostat in it once....learned a lot about protectin them injector tips. 🙄
Wuz a good old truck with a differential lock which wuz right handy.
It made a few trips up your way haulin drill pipe.
Don't see too many of em anymore.
Anyway Warren, we wanna see that smoke gone and see it haul that hay. 😁
Rode in one of these trucks in 1978 from LA to Phoenix in August. Hot miserable bumpy ride pulling a set of doubles through the California/Arizona desert. Temps in the hot time of day was about 120 with afternoon thunderstorms to cool the place down to around 95. The truck ran fantastic the entire way even the trip back to LA. I think it was a road ranger trans 18 speed. It was super hot in the cab during the heat of the day, I removed my shirt and pants and drenched myself with a canteen of water to get some relief. It had 260 air, 2 windows down at 60 mph.
Every time I see one of those Cab over's I think of the one in the Terminator movie lol.
always enjoy the video's those cabovers were great
They are worried about truck emissions meanwhile they give zero worry about all the private jets doing 100x the emissions.
Totally correct on your philosophy. I agree,100%
That cab goes up pretty quick in fast forward.Anyone working for the CARB should be embarrassed to be seen in public.
On some of the freightliner trucks the air system has to have pressure before the air comes out of the vents in dash I have run in a bunch of them that way when I am fixing air conditioning systems and will air system messing around with the bad air dryer it may not maintain the right pressure. I was taught with the big cam 855 Cummins to set the valves just like any other 4 stroke diesel engine on number 1 TDC you can set half of the valves and then turn a full turn to number 6 TDC and set the other half and then go thru and set the injectors exactly like you did I had a big cam 4 non STC industrial engine that sounded and smoked like that truck and I put new injectors and I had to hunt around to find a old Cummins diesel mechanic and he came and showed me his method and it just purred nice when I was done and it went from 20 gallons of fuel per hour down to 16 under full load it was in a John Deere self propelled corn chopper and with 8 rows of corn going thru it was all it could handle set at 400 horsepower. Keep up the great videos
Thank you. I enjoy watching you troubleshooting the older stuff.
Great video Warren really enjoy watching you work on this Freightliner and troubleshoot the list of problems with it. Looking forward to your next video stay safe Warren.
Thanks Warren for the good advice on how to adjust the injectors and valves.
Did just the overhead on my Kenworth w900a with a Big cam 3.
Always amazed me how better they would run after a top tune , I can't remember which engine it was maybe NTC350 you gently pried down the injector to empty it of fuel before setting it with the inch pound torque wrench. At least with the COE nice easy access on all cylinders. Always check what's in the cab first before tilting and what's in front of it once it goes over center. Cheers.
if trouble with "inner base circle " pull out your inch pounder and work outter base circle . that makes certain the plunger is fully DOWN as these injector have no Poppet to close end of injection , just pintle at or near fill bottom
also , may need run a dertergent we use to call the "beerball" before doing further injector adjustment
Warren is the type of dude I'd work for. I'm surprised you actually need a book all top stop injectors are tuned the same you do it at the valve overlap setting or top dead center
I was kinda waiting for a pistol to fall out and go off on the floor....😂
Must have use the good tape to secure it to the bottom of the seat
About time you had a nice easy job warren .
Working through the fault list .
Don't disappear in all that smoke 👍👍👍
Mornin feller...was just watching an old video of yours...not that anyone gives or should give a f@#k about what i was doin.....and you're exactly correct..have a good day man👊
Merry Christmas my friend everybody have a merry Christmas thank you❤
Warren, you can see through all the bullshit, but I others could. We are going through all of this electric bullshit in New Zealand.
I use my tee handle torque wrench to also set my valves, it's more uniform
My Cabover Freightliners had an air operated control that was plumbed into the water manifold up near the front.
Thank you sir, enjoy the trouble shooting aspect of your videos. Years ago I talked to a cab over driver and he loved the cab over and the only thing he wasn’t fond of was that if he were in a head on or any collision involving the front end the idea of literally being the first one to the scene of the accident didn’t really appeal to him.😊
Boy ya never know what you’re gonna get pumping a cab up lol I got a chuckle when the coffee cup fell.
Hey Warren ,thank for another great video. You got recognition from Chris, @ Professional Struggler from the UK..
Those blower motor switches are still available from Freightliner, although the typical parts guy probably can't figure out how to look them up. I just replaced one in my FLC last year, same switch that cabover uses. That old iron is good stuff, it just works. Cheaper to pay the ticket for running it into Cali than to buy a brand new truck you can't keep on the road.
Your not ranting! Your speaking facts!!. People in this country need to put there petty differences aside stand up join together and put a stop to these tyrants we call leaders (on both sides).
Oh and by the way im not speaking about violence so dont even try it (message to the feds watching).
Hey Warren, I had a old guy learn me that your thumb and index finger is worth 5 to 6 inch pounds ,I bought a snap on tougemeter dial type wrench and I was suprized ,it was so ,,hope this helps and don't piss anyone off
Warren, no mosquitos in your shop today. Great video, never seen under the hood in a cabover before.
love the rants!
Nice unit ,a friend of the family had one if those cab overs when I was a kid .
Great video Warren
Best of the season to you and your kin
Safe travels
Amen on the control brother. Sorry about your finger.😎
You have a switch right next to you in the old green freightliner with the cab jacked over. Bill
Thanks for sharing buddy have a great weekend I agree with you on how bad California and the emissions crap is commie as 🤬
I have a small cam Cummins used in a 250kw generator with 1300 hours. It was installed in a tv transmitter for CBS in 1968. Spent entire life in climate controlled environment. Never had a cold start is anybody interested in the engine and or generator. It resides in Pennsylvania .
I remember these I started in a 64 and 65 with 318 Detroits in them. Also saw several jucked up in the back row of the truck stop and the driver and the lot lizards rolled out on the windshield 😂😂
western truck and tractor repair right on 👍
nice truck i agree with you tell them to stick it where the sun dont shine 🤣🧐👌🤟
I'll always have a soft spot for these old cabovers, good to see'em still on the road.
Back when a truck was built to do a job, not be a computer powered, rolling air purifier that costs more to maintain and fix than it makes. 👍
Awesome video thanks Warren for the update have a great Christmas and new year bud 🚛🚛🚛🚛😎🤠
Secure items in Cab - Before you jack it up or they fly and brake the windshield... Rule No. 1
Merry Christmas Warren and hope you have a wonderful new year
Have a merry Christmas
LUV THE VIDS HOPE 1 DAY YOU SAY HI BACK...😅😅😅
Truckers just need to quit fighting California with there rules , haul freight somewhere else and let them figure it out for themselves.
good vid warren
Good job. Much enjoyed...Thanks...
I love the big cam videos..
I agree with you !
Hello Warren. I used to live out in the stick's and when I retired I had to move in to town. I keep a low profile and I keep out of the way of people. Otherwise they tell you what you can and can't do. I hate having live in town. It's because of being a diabetic and having bad legs. If it wasn't for my condition. I would be out of the town tomorrow. I don't know why people can't leave me alone.
I was taught when setting valve lash to have the min and max feeler gauges out, test the small first if it doesn’t fit adjust till it does, and the max doesn’t and the opposite if the max fits, that way you only need to adjust valves that are out of spec.
Though I guessed it doesn’t hurt to be thorough
They are going to ban classic cars also any vehicle with out a shut down connections to satellites- moved my family years ago
Hi, IF you get chance over the holidays, watch this guy Warren .... Bruce Wilson he play's about with some Scania's over in Sweden when he visits from the US.
I completely agree, it is all about control man. You aren’t free to do whatever you want, you must obey big brother is watching you. We are only as free as they want us to be. Thanks for the video, I’m working on my 1980 Freightliner Cab Over and unfortunately my front drive axel has some milky gear oil and slight metallic residue in towards the bottom of the fluid, been sitting for awhile so hopefully everything is okay in there, going to run some good fluid in it and go from there. Do you know if the meritor rears need limited slip additive with the gear oil by chance? I was told I have hard to find parts type of rears being the 10 smaller bolt axels 😞
There's no limited slip in that.
Warren, it's called O'BIDENomices!!
👍👍👍👍👍
Maybe cover the turbo outlet, and the after cooler air inlet. Ounce of prevention is a pound of cure.
Some *ich I felt that through the camera!
Politicians are completely out of control. I hope we don’t become Canada or England ….. spineless wonders.
i think increase the rpm will make big difference on the fuel injection and automatization on the injector
19:35 There lucky you have the soul you have to still help them after talking their sh** you keep on keeping on!