My Ford Cabover is Running Again! Full Engine Swap
HTML-код
- Опубликовано: 20 сен 2023
- Check out my sponsor aura.com/goodrich to get a 14 day free trial and see if your personal information has been leaked online!
Follow K2 Express on Instagram: @k2expressinc
I've been posting exclusive content to my Patreon as well if you would like to check that out:
www.patreon.com/HunterGoodric... 
Авто/Мото
My man doing full engine swaps with flipflops. 🤣😎
Super Trucker shit lol
If he starts doing more engine swaps, he may have to upgrade to crocs.
Ya no shit
You can take the man out of Florida but you can't take the Florida out of the man lol
Typical Florida man.
I love how you sped it up and narrated it. I cannot sit through other build videos when they are real time, but this one I actually watched all the way. Great job!
You need to learn patience!
😅😅
Ok red . . How much turbo power . . Question warrenty how many years
Question are they craftmand tools
Oh, well as long as he pleased you, that's all that matters your majesty.
There is something funny about pumping a bucket of oil into an engine, I will never complain about filling a V8 again.
Listen i wish we made cab overs great again.
@@TheAnnoyingBosscome here to europe bro we got best trucks you can get🫡
I give mad respect to this man doing this job by himself. He doesn't need a team of mechanics just milling around-
Never a better time to freshen up the paint than when everything is all apart
I hope you see this man. My eyes light up if I see you, Deboss garage, or watch wess work pop up in my RUclips feed because you all are genuine and just some normal people filming their life wrenching on some stuff. Stay like this man don’t go click baity.
I guess you don't know who Warren from Western Truck and Tractor Repair is!
Little trick to help on heavy trucks when you don't have the clutch alignment tool - Load the clutch onto the input shaft of the trans and mount the trans to the flywheel housing. Then just roll underneath and zip the flywheel bots in through the clutch inspection cover where you would normally reach through to adjust the clutch
I know some people helped you, but watching you do most of this by yourself is very impressive. Keep up the good work. 👍🏻🇺🇸
i adore these old trucks . love the aluminum frame rails , they are a rare find these days . back in the day CLT8000 were a beautiful truck
The joy on his face and absolute happiness is so cool to see. Know the feeling when I built my three motorcycles and got them started, and now love them so much, I could never be without them. They are more than inanimate objects, they become a part of your personality. Good Job Hunter, enjoy the truck, make money with it, and be safe.
Hunter you are a good mechanic and a hard worker….small bit of advice. If your looking to save time, put both engines side by side in your shop, as you take a part off of one(old one) then take two steps and put it on the new one. No lost bolts, spacers, washers etc. No putting heavy things down and picking it back up again. Its also a great way to make sure everything is fitting in real time. Also take it from a 50 something, you are young now but someday you won’t be….your back will thank you….it’s a marathon not a sprint….much love from an old timer
100% on the money, with ya on this from a broken 50 something bloke .
Yep was thinking the same thing (47 years farming)!
كلام في الصميم
Will not work. Certain procession to the job, front to back. Just like taking off your pants then drawers. You go back with drawers then pants.
It is so great seeing someone with so much knowledge and talent talking such a huge project
Something else I just noticed- it has an aluminum frame. Check it carefully for cracks, especially around the suspension attach points (if memory serves correctly). In my time at a Ford truck dealership we had two trucks that had to have aluminum frames replaced under warranty due to cracks.
Ford didn't require that we send the old rails back and one of the guys made ramps to get his Kubota on and off a trailer with the old rails.
>uses shopvac to create vacuum to prevent fuel backflow
ingenius
>uses old oil pump (previously used for burn barrel project), jerry-rigged with a drill and zipties to prime oil in engine
florida engineering
Outstanding Hunter !
Was fun to be along for the swap over.
Looking forward to your next adventure!
( I’m exhausted just watching that)
The Ford cabover was the best looking cabovers. Great find!
Hey I'm impressed with that vaccum idea to keep the fuel in. Nice one!
Fantastic to see the old truck back up and running. I love that air-ride cab setup. The only other truck that had a setup something like that was the Mack MH cabover. I never drove either one, but I worked for a guy who owned a Mack MH with the E9 500-hp motor. He said the truck was one of the best riding cabovers he'd driven once you got comfortable with how they "float", just like that Ford.
Good to see you got it back on the road again Hunter! I have been wanting to get an older truck myself for a while now, my son also want to build one so I'm hoping one day we will be able to be trucking together. Way to go and get outside your comfort zone and tackle that engine.
نحن نريد المساعدة اذا كنت راغب في العمل من رد شاخنة قديمة الى شاحنة جيدة وقوية
Ok, watchcin wrenchin' videos can get monotonous but still be interestin'. I like how you time lapse the wrenchin' while narrating tellin' us what your doin, great work Hunter!
Hunter, the man the myth the legend :D
You made quick work of that even with having to redo some of it! Great job! Look forward to seeing you haul.
wooooo more hunter content!! love what you are doing man keep up the great work!
Hunter Brother , great job on getting this Cab over going but if you can always where your seatbelt!!!! I lost a brother in one , he was ejected from the vehicle straight through the window 🥲 he was only 27 young family man , very sad day but please drive safe and enjoy one of my favourite Rigs ! 👏👍
Hunter, awesome video. Had to laugh at the flip flops. It's kool to see that everything worked out and it started for you.
That tractor is sweet. Heck I'd even enjoy driving it unlike some of the junk they make today.
Roll on dude. 🚛🚛🚛
Hunter giving us perfectly timed content 👌
when i saw u got the new motor , i new it wouldn't be long till this video was out been lookn for it. congrats an keep the vids coming.
Glad to see the ole Cabover back on the road 😎 put a set of stacks on it an put him back to work 💪🏾💪🏾 can't wait to see the future videos to come
You can very easily 3D print a clutch alignment tool for cheap. You can have one for each motor/clutch you work on
Heck yeah man good to see you get that beautiful truck up and going again
Nice job man, it must feel good to get something like that back on the road again! Engine sounds good too, can't wait to hear that thing loaded up pulling hard!!!
Good thing you noticed the seals 👍
Damn good work! Impressed that you knocked that engine out and refitted the new one with ease and so fast! Damn good catch on the front and rear main seal. How did you keep so dang clean?! That’s my question. Hey and dude I was happy to see you were on my main page on here so I seen you posted a video! And dude I could feel your excitement driving your beauty and fun to watch! I felt that same happiness driving my 92 Freightliner COE with forward set steer axle (not the ugly ass rear set steer axle, never understood companies/dudes who bought those) and 425 CAT, LOVED that truck! Soon as you smiled and said “i love this truck so much” I was smiling with you and knew exactly what you were feeling, pure happiness and excitement🤩🙌. Excellent video, dude!
Damm Hunter get busy I want to see the old cab over.
Glade to see another beautiful truck saved and back on the road. I'll find one of those one day. Till then I'll run my w9 till it can't run anymore
sacré travail,félicitation il revient de loin !
Was like did I miss any hunter uploads and then boom a notification.
To be such a young man, I consider you to be brilliant and motivated. Great video. Bring us more.
So fun to see your enjoyment with that truck... and love the safety shoes!
Very happy to see your truck running again well done.
Just watching this video is exhausting. That was a lot of work you did man! Enjoy your new engine. Can’t wait to see what you do with this.👍
I’m trying to keep that kind of enthusiasm going in Life! Yes, and I too Love My Truck!
I took my road-test in a similar old ford cabover 32 years ago...Thanks for the video
Congratulations on the engine. Sounds great 👍can't wait to see more .
A Very cool video! Those big fords were awesome! Great mechanical work! Lookin forward to the next one!
Awesome video. Thanks for speeding everything up
That’s how we primed detroits 2 strokes 318 ‘s and 238’s and it worked great because in the cap were blow out ports and if you would pop one out and car valve stems would pop right in and made life easy .
Wow. You’re the Man Hunter. Great narrating the build. Lot of thing to remember. Great job🤙😎
I loved this! Excellent work and I'm looking forward to seeing this all done up nice 😁👍
Looks like this guy is pretty darn good on that old cat
My new favorite youtube channel. So nice to se a mechanic not trying to be a stand upp comedian 👍
Wow. What an immense amount of work! Good job dude.
Good job, much respect on the work. Good luck on your hualing.
Nice job young man. Stay safe and enjoy the ride.
Great job! Time for new cab air ride shocks. Also, A/C on a CL is extremely problematic (and $$$) especially with a sleeper cab. It has 3 evaporators, lines running everywhere chafing on everything, it's a mess.
Another also- the radiator is very tall and relatively narrow. That means it has relatively few tubes and it doesn't take many of the tubes getting plugged to cause overheating. Cooling system maintenance is a must. Getting the radiator out and back in is NOT a fun job.
Good luck with this. Great to see a CL in such nice shape back on the road.
Thank you for the video and wish you all the best .The truck looks nice.
Nice job on the engine swap- nice thing with a cabover is just tilt the cab and go. Ford was ahead of the times with this cabover with the full air suspension cab. they fell a little tippy but its worth the nice smooth ride it gives- the smoothest riding american cabover. I drove one once and was amazed with the ride empty, even with 24's on the front.
Great content 👍. It is good to see her back on the road, thanks for sharing 😊. Can't wait to see you haul stuff. Thanks 👍 for sharing 😊.
Been there, done that. Having to undo things by cutting corners is not fun. You are the man.
Good for you Hunter! It's awesome to see you so happy and the truck is finally running the way you want it! Keep on trucking!
Did you do this all alone without any helping hand...congrats sir, that's a very good job and huge respect for!
Love that truck... glad to see her up and running again 😎
Awesome video! Great job! The old Ford is badass!
Another old 9000 on the road. I love it! Desperately tried to talk my dad into buying one in about 1979. He declined. LOL. And it is red-white-and-blue!
Man, I really love what you do. My name is Cedar. I’m in Klamath Falls Oregon. I’ve worked on trucks for years about 35. And at this point in my life, I’d like to try to make some money at it and I really love watching you work on tracks. You’re amazing. God bless you.❤
Great work Hunter. Looks like a runner to me!
When you were mounting the gearbox had me a nice maaaaaaaad giggle ,
Hunter "A few words of encouragement" ..........Most mere mortals would've said I swore copious amounts at it we get what you're saying man . Keep kicking goals young fella go live an awesome life .
It’s great that you jumped in the learn how to build the engine but why not take the extra time to repaint everything you took off the original engine? I’ve rebuilt a lot of diesels and we always repainted everything for a couple of reasons. It makes it look good helps against corrosion but more importantly you will notice any leaks almost immediately and will make watching leaks during the break in period.
Hey your looking good mate.. like healthy, relaxed and fit.. Good to see your keeping well.. and good to see you here doing your own thing.. truck is awesome!
Great video love the narration! I farm up near Idaho Falls and just picked up an old K100 cabover to use hauling hay. Wish I had your mechanic skills! If you ever need some content I have a combine I need to pick up in MT next spring!
Dam that was amazing urgent swap almost all by yourself Long time subscriber of everything you do I hope and pray that you make it to the top of RUclips and whatever you want in your life ❤ from Norristown PA 👍🏾👏🏾👌🏾🙏🏾
Goodday Hunter from Australia 🇦🇺
Absolutely mad mad respect to you great to see young strong men of your generation doing a honest hard day's work & deserving all the good luck & fortune coming your way.
Both Australia and U.S.A can use more young Fella's with your drive & enthusiasm.
Here in Australia we are still running brand new Cabover Kenworth's even with a Studio Sleeper.
Always wondered if it worth buying a new Kenworth export it to the U.S.A convert the steering & running them on the highways of your country.
Cheers
Louis Kats 👍
Good job! Especially doing it by yourself.
Im so glad to see You in your beloved truck that happy, it is really fun, i hope it will serve you well. God bless you. Greetings from Poland.
Glad you’re back
Nice work man, congrats on getting back on the road!
Your knowledge and ability to do the job alone is impressive!
Can’t wait to see that unit it all dressed up and working gonna be badass good work man
Damn that kitty cat sounds sweeet !
So stoked for ya man 😊
Love it. Looks like a kid in a candy store once he starts driving it. Keep up the great content. Very talented individual right here!!
That is awesome! What a great video. Looking forward to the next one.
Nice work! And sounds great
great to see it back in the road 👍
Been waiting for this one.
Congrats man! Awesome!
Great work mate!! The feeling of joy, pride and relif when you realised that you got it back on the road again must have been fantastic!
What's a mate?
Super job. Love the old Fords. Keep on truck'n. From the Great State of Maine.
Glad to finally get another video 🤘
O-H-I-O Porter greetings 🇺🇸 A cabover with a Cat engine…WOW! Cabovers Rule! Mine has the Silver 92 Detroit & I still love it! I can’t get over you doing all of this in flip flops. Gotta protect those feet & toes! You plan on repainting the engine? I’m glad that you admitted to taking shortcuts & then doing it right, even though it took you much longer to do it all. A job well done! WOW! Nothing like the sound of a good Cat engine! Thanks for sharing! 🥰🤩✌️
Hunter, what's up, buddy ?? You rock !!
Back when B's were still running OTR I replaced a lot of broken injector lines due to vibration. A set of new ones & a full set of clamps will save you for the long haul. I'm a 72yr old road service mechanic still working. 🤓
I used to drive one of those fords years ago one of the smoothest riding cabovers I've ever been in
A very educational and interesting video. I really enjoyed it.
loved this style of video , explaining things
I got to see alot of these 9000 built in ky at KTP years ago. Then during my senior year summer vac. I got hired to work with the film crew to shoot the training film for Freightliner when they bought the airomax-louisville truck line. It was a sad time seeing them go.
Nice work! I see why you love that truck!
I see how he loves this old truck!
Respect my friend!
Used to work on one of those years ago in NZ.Right hand drive with a all alloy cab i think.Was fastest truck around at that time as it was a double overdrive box.Thats wat they told us anyway.I remember the cab used to shake and rattle lot.Very light weight truck for NZ rough roads.Cab got metal fatigue and had to be welded up and chassis broke and had to be repaired too.Was owned by a company called RAYMAC
The Flipflops Man tearing the old motor apart and putting-in a New motor. great job Hunter.
Good to see its back on the road