How to: Install PRE-WIRED Original Monkey Bars
HTML-код
- Опубликовано: 8 сен 2024
- Paul Yaffe's Bagger Nation Original Monkey Bars now PRE-WIRED!
Enjoy your ride with a custom set of bars fitted to your needs and enjoy your install with our pre-wired Monkey Bars. Paul Yaffe breaks down exactly how to install the all new pre-wired bars, he's taken all the guesswork and frustration out of your install and made you look like an expert!
Available on baggernation.com after Friday, August 2nd or call the shop now to place an order.
So this might be an older video, however thank your trick WRT to pulling the wires worked for me very well, my bars are the dominator 12 inch (prewired (no TGS) had to use mine) miter bars and the wires were getting stuck at the second bend at the bottom. I used the shrink wrap and wrapped some 0010 guage wire just like you showed, worked, used some lithium grease and adjusted the other wire loom so i could move both at the same time. No codes this time, first try did. Had to purchase another TGS since i did something to the original. 2023 SGS, cost of the TGS, aprox $180.00 plus tax PN: HD number, 32700050A
Met Paul Yaffe many years ago at an Easy-rider rodeo in Chillicothe Ohio and what a really cool guy.
Great bars. Excellent quality. Definitely worth the pre wired. The throttle by wire was not easy at all to run. Took me a long while. You all should offer a set with the throttle by wire installed as well. Charge a core fee and we'd send you the old ones back. Idk if I'd do this again, but then again I hope I don't have to for a long time! Definitely happy with the quality and look on my 2019 road glide.
Outstanding video Paul. I appreciate you taking the time to do a video like this. I'm sure you are extremely busy managing Bagger Nation but making this video says a lot about your character, love of motorcycles, and customer care you and your company offer. Great job and thanks for your support! Definitely buying the handlebar now.
Watched this before doing mine and have to say if you do exactly as Paul says in his tip for doing the throttle by wire. It is that easy, took maybe five minutes to run wires through the bars. Give more of these install videos.
Thank you, Kevin!
Glad it helped! We are working on more videos so stay tuned. If you are interested in the new videos and haven't already subscribed, please do and ring the bell for updates.
Thank you!
Great job , I'm doing my own pre wired bars this coming weekend. Thanks for sharing
He should do a video of how their Monkey bars have a problem of the grips not fitting because of to much chrome on the 1" grip end of the bar.
I've had two sets that don't fit the grips, They want me to grind the bars to get them to fit.
Great video since I sidnt get any instructions with my monkey bars. Thank you!
You either?
Wish they had this set up for 2011 bagger
Excellent video!
A 2019 street glide CVO with a 12 inch bars Will you have change out your brake and clutch cable?
So they are pre wired but I have to run wire?!
i have a set of these on my ultra classic a major improvement but would like the grips just a bit farther back with the up bend higher. i am looking to put bars on the 2012 tri glide for wife so grips are farther back and up, how much for a set ready to put on, the extended wires, cables, break line, reveres controller and put heated grips on? chrome bars, chrome switches, black housings?
how come u have to cut the trotte wire caseing then shrink wrap it after ?
Checked your website for ordering info but there are no prices listed and says you must call to order. Will you be making these available to order online from your website?
What size heat shrink did you use? I’m getting ready to re-wire my monkey bars. Thanks.
For specific questions call Phil or Brady and they can go over what you need! 602-840-4205
Can’t wait..... I currently have your bars on my 2011 RG. And I own a pair of your sport bars for a future custom build.
Awesome! If you have any questions or are looking for anything in the future don't hesitate to reach out or call our sales team.
I have headed grips on a 14 limited is wiring in the bars for those?
I see the pre wired ones that'd for my 2014 CVO Limited. They say on Bagger Nation they'll fit my bike, but then of course you get ads and such and when I tap on them they say not compatible. Just want to make sure the pre wired one's for 2014 touring will work on my CVO Limited (2014).. Would it be possible to reply with a link of the exact pre wired 14"monkey bars that'd fit my bike? Thanks much!!
Hello Brandon,
No problem It would be alot easier if you contacted Brady I mentioned you this morning and he has some additional pics, tips and tricks. Oh... By the way Out Thanksgiving special kicks off to day. SO... Good timing! Brady can be reached 602-576-8309 or bpitmon@paulyaffeoriginals.com
Thank you!
will the brake and clutch cables be long enough for the new bars
Really depends on what height of bars u get
What's the tallest bar you can get pre-wired?
16" just like our Original Monkey Bars but the pre-wired helps with easy/fast install!
I didn't get any instructions or shrink tube either. Awesome looking bars though!
Not true plug and play with the throttle by wire , a bit of a click bait!! But with that said I'll buy Paul yaffe all day lol!
I love your shirt. Inclusion dealing with special needs people is so important. Is that why you’re wearing it?