Harley Davidson 100% plug and play handlebar install from Dominator Industries!

Поделиться
HTML-код
  • Опубликовано: 7 дек 2024
  • I hope you guys enjoyed this project as much as me! I genuinely feel that Dominator is a great, family run, American company. I've personally spoke with the company and I can honestly say that not only do that make great bars, but they are also great people! Check out the links below to all the stuff you need to do this project yourself. And make sure you use the discount code DANSPROSHOP10 for an extra 10% off your order plus free shipping! And don't forget to check out the other video for the stage 1 upgrade! • Harley Davidson full s...
    Discount code: DANSPROSHOP10
    Website: www.dominatorc...
    10" plug and play Meat Hooks (exact kit installed in this video on a 2014 FLHTK)...
    www.dominatorc...
    Anti roll top clamp for bar mount (soooo worth it!)...
    amzn.to/43GtTef
    Wire pulling lube (you definitely need this stuff)...
    amzn.to/4af1L4q
    Heated grip install PDF instructions (the way that Dominator recommends to do it)...
    www.dominatorc...
    Heated grip install instructional video (produced by Dominator)...
    www.dominatorc...
    Plug and play bar kits for 2024 touring models (currently the only company that offers this!)...
    www.dominatorc...
    Harley Davidson tie down brackets ( not OEM, but still good)...
    amzn.to/49jUteq
    Klein TORX screw driver kit...
    amzn.to/4cE47v9
    Sunex TORX bit set, T10-T60...
    amzn.to/3IVJm0u
    Crown Royal bags (five bag set)...
    amzn.to/49gVB2u
    Milwaukee M12, 3/8" ratchet kit...
    amzn.to/3PGtvq8
    Wire pulling lube (you definitely need this stuff)...
    amzn.to/4af1L4q
    Anti roll top clamp for bar mount (soooo worth it!)...
    amzn.to/43GtTef
    Pneumatic motorcycle lift (this thing will change your life)...
    amzn.to/43Cc2oJ
    Looking for some genuine, OEM, Dan's Pro Shop merch? Check out the official website and get yourself some official Dan's Pro Shop merch today! visit, www.dansprosho...
    #tools #howto #motorcycle #harleydavidson #doityourself ‪@dominatorindustries‬ ‪@vanceandhines‬

Комментарии • 79

  • @ItzRazed
    @ItzRazed 6 месяцев назад +2

    After multiple months of debating if I wanna try this myself or not I finally bought some 10” Meathooks and I don’t know why I was so worried, it was the easiest upgrade ever. The fairing makes it seem intimidating but it’s super easy! And thank you for the step by step video it made the whole process super simple!

    • @dansproshop
      @dansproshop  6 месяцев назад +1

      Awesome!!! Glad I could help!!

    • @MichaelGibbs-g1x
      @MichaelGibbs-g1x 5 месяцев назад

      I ordered 16in plug and play bars from dominator on May 25th, on June 5th I emailed for an update, they told me the bars would ship that Friday or the next Tuesday. They did not ship and Dominator will not respond to any of my emails. Turns out, this very issue is a constant complaint on BBB with this company...

  • @randymableson7882
    @randymableson7882 Месяц назад +1

    Excellent explanation and these are the bars I planned for my own bike. Harley here in canada told me I couldn't get them in 10 inch. Thank you for showing me that I can good video.

    • @dansproshop
      @dansproshop  Месяц назад

      Thank you. Good luck with your project!!

  • @kellymchenry1944
    @kellymchenry1944 28 дней назад +1

    Great video. I did 10 la chopper bars on my 15. streetglide. I’m about ready to do the same on my 2020 cvo streetglide

  • @Lilron550
    @Lilron550 2 месяца назад +1

    Thank you!! I have the same bike, color & all!! This is the exact look I was looking for!!!💯💪🏾

  • @michaelpulice6100
    @michaelpulice6100 День назад +1

    Thanks for the excellent video

  • @xghavin
    @xghavin Месяц назад +1

    If anyone can help answer my question, I've been looking at the 12" meathooks pre wired, I've got a '21 48 which is dual cable throttle, do these bars have those built in?

    • @dansproshop
      @dansproshop  Месяц назад

      If your throttle is drive by wire or (electric) you can have internal wires. If your throttle is cables or (manual) you have to run them exterior because cables cannot bend like wires. Hope this helps!

  • @vdubpowered
    @vdubpowered 3 месяца назад +1

    I'm eyeballing a set of 12" all in one for my 08 street glide. after doing a demo ride on the 24 road glide limited with the taller oem bars, it made me want taller bars even more for my 08 SG

  • @davidmatias6239
    @davidmatias6239 7 месяцев назад +2

    Bro attention to details on your video is awesome. Great work

    • @dansproshop
      @dansproshop  7 месяцев назад

      Thank you! I really appreciate that!!

    • @davidmatias6239
      @davidmatias6239 7 месяцев назад +1

      I just ordered the bars for my brother this video is gonna make the installation much easier for me.

    • @davidmatias6239
      @davidmatias6239 6 месяцев назад +1

      I purchase the bars for my brother, and unfortunately they sent the wrong items and I must say dominator industries company has the worst service that I ever had with after several emails I’m still being ghosted. I just wanted to share my experience with that company for future customers to be aware of.

    • @dansproshop
      @dansproshop  6 месяцев назад

      @@davidmatias6239I’m really sorry to hear that. Did you try calling and speaking with someone?

    • @davidmatias6239
      @davidmatias6239 6 месяцев назад

      @@dansproshop yeah, they don’t have any phone numbers the only way of contacting is by via email . Their only response is “I e check with tech and they’ll get you dialed in “
      I know you don’t represent them bud I’m just getting pissed by the whole situation.

  • @jeremyosborne1018
    @jeremyosborne1018 3 месяца назад +1

    When installing the new bars, should I replace the bushings even if I buy the anti roll clamp?

    • @dansproshop
      @dansproshop  3 месяца назад +1

      It’s not a bad idea!

  • @matthiasvonrotz5348
    @matthiasvonrotz5348 Месяц назад +1

    Streetglide cvo 2015 possible???

    • @dansproshop
      @dansproshop  Месяц назад

      I don’t see why not. The cvo is just a fancy street glide. Everything underneath is exactly the same

  • @ronaldo2347843057483
    @ronaldo2347843057483 3 месяца назад +1

    Where did you purchase the 1 .5 riser clamp from im doing 12 inch 1.5 meathooks pre wired on 11 streetglide

    • @dansproshop
      @dansproshop  3 месяца назад

      The clamp location is still the factory OD so the original clamp will work. If you want the better clamp you can use the link in the description of the video

  • @davids7096
    @davids7096 25 дней назад +1

    Did you have any problems with Dominator Industries? Ive read a lot of bad reviews on forums. They are the most affordable 1.5" diameter meathooks I could find, with a decent width. The factory 47's are a little too wide for me.

    • @dansproshop
      @dansproshop  24 дня назад +1

      I absolutely love working with them. You know how things work. People only leave reviews when they are upset. Rarely does anyone leave a review when they are satisfied with service. Best of luck!

    • @davids7096
      @davids7096 12 дней назад

      @dansproshop thank you for replying, bro.

  • @mrnonpc9885
    @mrnonpc9885 2 месяца назад +1

    You did a great job making the video. The only suggestion I have is I would have liked you to show the handlebars side by side. I have a limited like you, but I thought the stock bars were 10” too. What are they 8” bars?? I always thought 12” was the way to go but you made a good presentation for the 10”.
    Do you find the bike easier to handle with the 10” or the same?
    Take care.

    • @dansproshop
      @dansproshop  2 месяца назад

      Thank you! it handles great, no issues at all

  • @jdawg6439
    @jdawg6439 2 месяца назад

    I plan on installing these same bars, they will be 14”, will I need anything additional other than the bars and maybe a riser?

  • @carlosvillanueva7481
    @carlosvillanueva7481 5 месяцев назад +1

    Wonderful job 👏

  • @ronaldreid1058
    @ronaldreid1058 2 месяца назад +1

    what pipes are you running?

    • @dansproshop
      @dansproshop  2 месяца назад +1

      Check out this video! Harley Davidson full stage 1 install!!! Intake, exhaust and tune
      ruclips.net/video/XqPIc3lvRVI/видео.html

  • @torigene30845
    @torigene30845 5 месяцев назад +1

    We were just checking everything to make sure it works and unfortunately our heated grips don’t work and we have front blinkers but no back? Any suggestions?

    • @dansproshop
      @dansproshop  5 месяцев назад +1

      Oh man. There are a lot of potentials there. Did you have any specific trouble?

    • @torigene30845
      @torigene30845 5 месяцев назад +1

      Just a little update we did loosen up all of our mounting and everything started to work (most likely a kinked or squished wire). The only thing we had a problem with was our heated grips weren’t working but found an extra accessory power cable snugged up in the frame and now they work!

    • @dansproshop
      @dansproshop  5 месяцев назад +1

      Awesome!! Glad to hear it. Enjoy your new setup!

    • @torigene30845
      @torigene30845 5 месяцев назад +1

      @@dansproshop thank you! Your video was the best help we found going through this whole process. It really did wonders!

    • @dansproshop
      @dansproshop  5 месяцев назад +1

      That’s awesome! Thank you! I’m glad it helped!!

  • @michaeldunlap6659
    @michaeldunlap6659 3 месяца назад +1

    Great video!!

    • @dansproshop
      @dansproshop  3 месяца назад

      Glad you enjoyed it. Thanks!!

  • @JR-fz5uh
    @JR-fz5uh 6 месяцев назад +1

    If I have to take off brake line and install longer one is bleeding going to be necessary?

  • @wb4514
    @wb4514 6 месяцев назад +1

    I like their products but I'm confused by the pre-wire bars and the all in one add on kit. Do I need both ?

    • @dansproshop
      @dansproshop  6 месяцев назад

      Just get the pre wired and you should be set!

    • @wb4514
      @wb4514 6 месяцев назад

      Thank you from a new subscriber!

  • @LowandSlow567
    @LowandSlow567 7 месяцев назад +2

    Great video 👍

  • @timleo2630
    @timleo2630 3 месяца назад

    What can you do if the new handlebar throttle wire came with a white plug not a green one. ?

  • @Str33tglide_21
    @Str33tglide_21 6 месяцев назад +1

    Amazing love it 😍

  • @kadenrichards2383
    @kadenrichards2383 6 месяцев назад +1

    Hey Dan, I am currently putting 12 inch miter apes on my 2008 street glide. However, I am having a very hard time pulled the slack out of the wires to get the throttle and hand controls in. Did you run into this or do you have any tips or advice?

    • @dansproshop
      @dansproshop  6 месяцев назад

      Lootttsssss of lube. Trust me. lol

  • @randybusse1206
    @randybusse1206 2 месяца назад +1

    Thanks, I thought your video was very good. It was long but thorough. Thanks.

  • @trevorobanion8100
    @trevorobanion8100 3 месяца назад +1

    The only thing I don't like is the tie downs being mounted that high pull the front the forks down so they're compressed while on the trailer going down the road. That's not good for fork seals at all. Thankfully, they make soft straps so you don't have to put all that stress on your fork seals when you trailer. Also, gotta give Kruesi his credit for the Crown Royal bag idea. Haha

  • @bradleyfarmer1344
    @bradleyfarmer1344 5 месяцев назад

    So I was wondering were those the 100% plug and play bars because on their website for the 100% plug and play bars it says, “Factory Harley Davidson twist grip sensor fully installed and PreWired!” So I was just wondering which ones those were like if they were just prewired or the 100% ones.

  • @Jackcj-xq2uv
    @Jackcj-xq2uv 4 месяца назад

    I'm kinda wondering how your bars in this video had plug ins for the throttle? I had to run my wires all the way through.

  • @JR-fz5uh
    @JR-fz5uh 6 месяцев назад +1

    Any different for 09 street glide?

    • @dansproshop
      @dansproshop  6 месяцев назад +1

      Some parts may be different, but the process is the same

  • @RiderTalkHQ
    @RiderTalkHQ 7 месяцев назад +1

    How long did it take to get your bars

  • @didleyhay253
    @didleyhay253 7 месяцев назад +1

    Nice like it mate

    • @dansproshop
      @dansproshop  7 месяцев назад

      Thanks! I think it turned out great!

  • @mr81blues
    @mr81blues 6 месяцев назад +1

    Did you have any trouble with company? Their BBB rating is not good but I really like the bars lol

    • @dansproshop
      @dansproshop  6 месяцев назад

      I can only speak to my personal experience. I had no issues at all and I absolutely love the bars!

    • @justinh9033
      @justinh9033 5 месяцев назад

      Yes they are terrible

  • @IronAngel1958
    @IronAngel1958 3 месяца назад +1

    Only for newer bikes, us guys that have and love our older classic bikes must look elsewhere. There are other shops that do this too, if not better...

  • @alphabety5849
    @alphabety5849 3 месяца назад +1

    Garbage quality bars. Garbage customer service. Buyers beware.

    • @davids7096
      @davids7096 25 дней назад

      That's what I've heard. They are the most affordable 1.5" meathooks I could find. Plus, the width isn't too wide. The Factory 47's are 37" and that's probably a little too wide for me.