How to install Handle Bars on a 2023 Road Glide 3

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 50

  • @SparkyLittle
    @SparkyLittle Год назад +1

    Really found this helpful ibjust got a roadglide 3 Friday and was wanting to do these same bars on mine.

    • @DrHarley
      @DrHarley  Год назад

      I am so happy that you got some value out of this video

    • @SparkyLittle
      @SparkyLittle Год назад +1

      @DrHarley what size bars did you put on, and what's extensions? Did you use

    • @DrHarley
      @DrHarley  Год назад +1

      They were 14 bars. I did not have to extend the brake or clutch. I did however extend the wires.

    • @SparkyLittle
      @SparkyLittle Год назад +1

      @DrHarley ok thank you that's what I wanna do to mine

  • @ssgveight
    @ssgveight 11 месяцев назад +2

    Love the video. Been looking to swap out my stock bars for a set of meat hooks.
    Only thing about your video I could have done without was the background music. Good music, but distracting.
    Definitely do appreciate you making this video. Love the in-depth step by step.

    • @DrHarley
      @DrHarley  11 месяцев назад

      I agree with the music. I am nl longer putting background music in. Thank you for watching and your input.

  • @thefrogzilla420
    @thefrogzilla420 Год назад +1

    Always appreciate your work👊 Thanks for sharing with us ✌️

  • @titocaraballo3260
    @titocaraballo3260 Месяц назад +1

    Thank you for posting this video. I appreciate your work. I have a couple of questions. I have a 2023 Harley Road glide 3, and I just purchased the 12" Monkey handlebars... Do I have to replace the clutch adjuster, cable extension, and kit isolator when I do the new install?

    • @DrHarley
      @DrHarley  Месяц назад

      When I installed those bars, I did not have to replace anything. I would recommend replacing the stock handle bar bushings.

  • @jasonbreedlove495
    @jasonbreedlove495 Год назад +1

    Great video! Just recently did a bar swap on my 19 Roadglide, and by far easiest process.

    • @DrHarley
      @DrHarley  Год назад +1

      It's easier than most people think.

  • @NKBobcat
    @NKBobcat 4 месяца назад +1

    Doing my bars this week and I am watching this video multiple times to boost my confidence. For the difficult one that you did off camera, can I just unscrew the switch housing and then pop it off?

    • @DrHarley
      @DrHarley  4 месяца назад +1

      Thank you, and i am happy that you found dome value in my videos. As f0ra as the riser bushings go. You can. Be careful that the triple trees done come apart.

  • @deanbedetti
    @deanbedetti Год назад +3

    Doc Harley ... I'm a BUB ...Appreciate your content , always educational .

    • @DrHarley
      @DrHarley  Год назад +1

      Awesome. I am glad that you are enjoying and getting value out of my content.

    • @deanbedetti
      @deanbedetti Год назад +2

      @@DrHarley - Like seeing ya'll on the Monkeys live stream to. Waiting to hear back from Mike over at suspension tech. I wanted to know how much useable travel I will have on the 14" shock for my 2023 tri-glide . ? Maybe H-2 knows idk .

    • @DrHarley
      @DrHarley  Год назад +1

      Reach out to Hellson2wheels. He is the owner of H2 Performance

    • @John-rg24
      @John-rg24 Год назад +2

      Thank you brother 🤘

    • @DrHarley
      @DrHarley  Год назад +1

      Hell yeah. It was fun.

  • @ultraclassic01hd
    @ultraclassic01hd 10 месяцев назад +1

    Just love watching people wrenching on Harley's!

    • @DrHarley
      @DrHarley  10 месяцев назад

      I enjoy wrenching on bikes as much as riding. Thank you for watching

  • @stanwineberg6991
    @stanwineberg6991 7 месяцев назад +1

    Hello brother. can you tell me if I put 14inch LA chopper Thresher bars on my 2023 road glide special. Will the existing cables still work?

    • @DrHarley
      @DrHarley  7 месяцев назад +1

      Yes, they should fit. Might have to re-route the clutch cable and extend the wires. Also there are zip ties around the lower riser clamp and one ferthere down the brake line.

    • @stanwineberg6991
      @stanwineberg6991 7 месяцев назад +1

      Thank you very much sir!!@@DrHarley

    • @DrHarley
      @DrHarley  7 месяцев назад

      Any time.

  • @heybruh3274
    @heybruh3274 Год назад +1

    I've completed several bar swaps on Road Glides and have never removed the ignition switch. I have also helped guys who didn't follow the instructions very well , to fix their ignition locks after watching videos like this.
    Not saying you are wrong, I
    AM SAYING there is a better and more fool proof way

    • @DrHarley
      @DrHarley  Год назад

      I find it easier to remove that than the small trip peice. I have seen alot of the small tabs brake off.

  • @titocaraballo3260
    @titocaraballo3260 Месяц назад +1

    With the 12" handlebar install, do I also replace the harness extension?

    • @DrHarley
      @DrHarley  Месяц назад +1

      There is enough of the throttle twist wire not to extend. But I do extend them for the switch's

    • @titocaraballo3260
      @titocaraballo3260 Месяц назад +1

      Thank you

    • @titocaraballo3260
      @titocaraballo3260 Месяц назад +1

      Hello again! I have another question. Where do I get the power from when connecting the wires for the heated grips on a 2023 Road Glide 3. I'm a little confused by the instructions. Maybe you can help. Thank you

    • @DrHarley
      @DrHarley  Месяц назад +1

      @titocaraballo3260 There should be a 2 wire plug under your gauge cluster. Might have to dig around for it. It should be a black and white wire. Or a red and black wire.

    • @titocaraballo3260
      @titocaraballo3260 Месяц назад +1

      @@DrHarley OK. Thank you. I appreciate it.

  • @acim2228
    @acim2228 9 месяцев назад +1

    you sell that stock bar. I like the pull back like buckhorns. that fit a 2024 low rider ST controls ? thx brah big island.

    • @DrHarley
      @DrHarley  9 месяцев назад

      I don't think they will fit your lowrider ST. They are 1 1/4 diameter at the clamp. Also, not my bike and the bars went home with thre owner.

  • @RonHood-g3z
    @RonHood-g3z Год назад +1

    What bars are those Harley Davidson ? 12" or 14"

  • @WheelsWeightloss
    @WheelsWeightloss Год назад +1

    Enjoyed ya on the live with Pro Monkey.

    • @DrHarley
      @DrHarley  Год назад

      Thank you. That was a fun night.

    • @WheelsWeightloss
      @WheelsWeightloss Год назад +1

      @@DrHarley They are a couple of awesome folks we rode together in the org that shall not be named LOL Love this video btw, going through doing everything on my RG3 after my first RG3 was totaled..... was debating on bars....

    • @DrHarley
      @DrHarley  Год назад

      That person loves his bars. He stated that the ride is more comfortable.

  • @RonHood-g3z
    @RonHood-g3z Год назад +1

    Thank you

  • @joelcarmonajc11
    @joelcarmonajc11 6 месяцев назад +1

    What type handlebar or they and length

    • @DrHarley
      @DrHarley  6 месяцев назад

      Those are KST 12 inch bars.

  • @superduty131
    @superduty131 8 месяцев назад +1

    Calipers are NOT up at the handlebars!! They are down at the wheel 😮