Longer LK4 - 3D Printer - Unbox & Setup
HTML-код
- Опубликовано: 23 авг 2024
- Amazon Links
Longer LK4: geni.us/JMOs01
SainSmart PLA: geni.us/JB12
Recommended: geni.us/JustVlads
LK4 3D Printer is equipped with easy to operate Intelligent operating system, 2.8” colorful touch Screen, which offers brand new UI, on screen model preview, offline printing features.
New Aluminum Frame Design. Stylish novel appearance. Better printing quality and durable with sturdy new frame. Hassle-free leveling.
Safe Power Supply. LK4 printers comes with built-in high quality power supply, more safe, protect your printer from unexpected power surge.
High Quality and Attractive Price. Resume printing technology. No-leaky self-designed nozzle. Setup kits come partially assembled. Best choice for the users who love DIY, Maker, Education, and etc.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....
New Channel: www.youtube.com/@Just_Print
Longer LK4: geni.us/JMOs01
SainSmart PLA: geni.us/JB12
Recommended: geni.us/JustVlads
It would be great if you could show us a cad system and how to use it.
Do you have to level the printing board each time you do a print??
Very cool, I also ordered the same, this is my first reasonable purchase, I hope I will not regret it. 😁
A true hero. Without you, I couldnt put it together
I put mine together and after my first test print, I went for the air spinner. thanks for your calm cool collected instruction on putting it together. Thanks.
Have a friend that's been looking for a good price printer for printing tabletop minis so I directed him to your video. Great job like always, keep it up.
Thank you so much for this. The instructions look like someone who dropped out of the 8th grade
My printer is a bit different than this one, more pieces are assembled, but it's more-or-less the same layout and the original instructions were barely any help. Thank you for this, you saved my sanity!
Thanks, Ordered one and received it today, watched your video to put it together and I am printing within an hour and a half! Thank You!
Any updates on how it worked out for you 1 year later ?
Found this video after I put the 3d printer together. I will go back and adjust some of the things you talked about. Thank you so much. I found the instructions lacking.
New subscriber here -- thank you for the video; very well done! I am looking forward to the LK4; this is my first 3D printer!!
okay after watching alot of videos about 3d printer's for information. you got my attention with this 1. thank you
Thank you so much for this tutorial... super helpful!!!!
Thank you so much this helped me and my mom put this intact
Thank you for your helpful video. It helped me to set up my 3d printer easier than the manual.
This video helped me SO much! Thank you!
Nice work, I followed these instructions for the pro model, they are close enough. Thanks for making the video, instructions that come with the printer are pretty basic...
Questions:
- What are the differences to the LK2?
- What kind of controller board and stepper drivers does it have?
Cant confirm at the moment but the electronics seem identical to the LK2.
Which printer settings did you use in Cura? I have googled for some but haven’t found any.
The sd card comes with a .ini file and you could just load it.
@@peachsucc9831 They are probably asking because they dont have the card, Much like me
Good vid, very helpful. Thank you.
First video i see in you tube of this type !! Nice video , good finishishes , with nice , solid , clean edges , in general looks a good machine , nice description of machine , software and video , thumps up ! 1 question and 1 opinion : you could print a cristal/S of quartz mineral or a specimen , ( a group of various minerals of same specimen in or on association with others specimens of diferent mineral varietys ) , and other is does for make a peace for put in a bottom of a steel bench for protect the wood floor of damages of metal in wood , like the square peace you made , but in a small size for a bar of steel of 10 x 10 mm , may be interior 10,5 x 10, 5 mm x 10,5 mm hole , than make one wall of 1 or 2 mm of wall , i think is enough , sorry for my english and good job !
Hello, a question about leveling. I've gone around all 4 corners and get just a slight tug on the paper. In the middle, it's quite loose so I have to tighten it up. But then, the 4 corners are all to tight. I've done this numerous times, but can't get the bed to level properly. Do you have any advise?
Thank u for ur good information..
I have a question, Is it possible to install bl touch?
Thx so much!
Great video, thank you so much! I can't even get to step one of assembly. The main frame does not sit evenly, and like you show in your video, I loosened the screws on the sides and the frame indeed relaxed. But as soon as I re-tighten the screws, it is uneven again. I tried holding down hard on the side bars while my husband tightened the screws, but as soon as we let go, it wobbles again. Would it be acceptable to put a shim between the leg and the frame at the bad corner? Or do I need to replace the entire main frame?(It almost feels like the bar across the middle that the two outside bars are bolted to is warped or twisted.) Or what? I've sent an email to Longer, but I don't hold out a lot of hope for a response.
Im new to the 3-d printing game, and im trying to set up cura slicing software using this same printer what setting do i put in for x and y min/max allong with g-code flavor? i don't want to damage the machine by putting in the wrong settings
Hallo Vlad. I have some questions about your 3D printers. You have your Ender 3 PRO, and today you told about Longer Lk4, can you answer, which printer is mutch better for startup, can you recomend? I'll saw all your videos about all your printers. Untill today I'll think to buy Ender 3 PRO, but today you demonstrate Longer LK4, and now I don't know, which one is better. Maybe, if you can't answer me here, you can make video when you can compare this printers step by step?
P.S.
Sorry for my English ;)
Creality has a slightly better print quality and is more of a basic machine but the lk4 is alot easier to use for beginners and has more features like touch screen interface, filament detection, and a glass bed. Both are good choices.
@@JustVlads Ok, I understand. Thank you for your answer.
After one year, does this printer is still worth it? When looking for recent videos elsewhere, I see that same model can now be built in fewer steps?
wow 4K
First time 3D printer user here. I got this one for a present and have no idea how to use it. Is it supposed to make that loud jutting sound when I try to level it? It looks like it's pressing into the bed, so I stopped it in order to not damage the tip. I don't know what to do. The plate is as far down as I can get it. Help
Its been a month so maybe you figured it out already but - I believe you can raise the z axis limit switch higher on this printer. Do that, and the hotend won't drop as low (it will stop once the switch is depressed). Probably just need to loosen a screw on the switch and slide it up a little, then re-tighten.
THANK YOU. Just unboxed set up and was floored to see that NOWHERE on the manual, or the website was there any documentation ON ACTUALLY PRINTING SOMETHING. You would think they would describe how to pre-heat, feed, etc. Hell, I didn't even know where to stick the filament. Absurd.
Bonjour 🤝
Peut-on imprimer du filament flexible avec cette imprimante ? Merci
Where you able to locate a printer profile or did you create one from scratch?
Do you know where I can find the software for Mac?
PLEASE HELP!!!! I just unboxed my longer today and set it all up. I did the bed leveling with a piece of paper, then I did some sort of print of thingiverse thats a one layer high square in every corner to tell you how leveled your bed is. My problem is all 4 corners are practically perfect but the center seems as if it’s too close to the bed. How do I fix that?
Put the glass on the bed
Great review. Can you confirm the stepper motor gears are not press fit? Thought I saw grub screws, but hard to tell watching on my phone. Thanks!
The gears are NOT pressed on and are removable. Thanks
Just Vlad awesome! Should make installing dampers a breeze. Thanks!
What software app did you use to print your own designs
is safe to plug this on 240v ?
I've just bought it, I hope I can install everything. Do you use any spray on the table to filament not unglue from the table?
Sorry for my english
Make sure that you use the proper temperature for your plastics. I've been using ABS plastic for a few years and when I picked up the LK4 it gave you the options of using three plastics. When I clicked on the ABS, everything was going great until the parts came undone of the bed. I've tried a few of these parts but no joy. Finally when the reheater was turned on, I noticed that the ABS would extrude at 230 degrees while the bed was at 80 degrees. I checked but when the part was being printed, the extruded temp was 210 degrees while the bed was 60 degrees. I bumped the temperature quickly, 230 extrude by 80 bed, and everything has worked finally.
For the table to click with the printing, I would recommended the Elmer's washable school glue stick. It leaves a purple coat on the table that goes to clear when it is ready to bond plastic to the bed.
I'm having issues with the filament sticking to the glass. Its like the only thing that works are the preloaded files, help!.
What was the name of the vase file
Hey where did you buy that Xbox steering wheel and gear stick
So I'm in the uk what voltage should mine be at? Is it 240v?
My filament holder is different
if you could only buy one 3d printer which would it be the longer lk4 creality ender 3 pro or the creality cr-10
Creality has a slightly better print quality but almost everything else is better on the lk4, like the touch screen interface, filament detection, glass bed, and the price is better also.
Was thinking about getting this printer for a first time user. You helped me make up my mind. I heard there was some issue with the leveling knobs being hard to get to cause they were so small. Curious to know what slicer programs you would suggest for this printer.
Don't
@@Gilgil3784 to late
when I turn it on everything turned on but the screen what's up with that
what do you use to print like website to change it(files) to gcode
im getting error 9 mid temp trigge you have any idea whats that about
Where do you insert flash drive into longer LK4 printer
You don't. There is an sd card slot on the left side. The usb part is for your computer
What is this a clone of again?
Is this open source?
This printer is the same of alfawise U30?
It appears to be so, its also very simaler to the longer lk2.
Is it a flexible bed?
Its not flexible but it is removable.
Just Vlad ok thank you
Can it print tpu or tpe
bobby slick
Why can I smell it
that purple thing you call ""airtoy"" is a gyroscoop
Gyroscope's are quite different than "airspinner's" but based on the same physics.
@@norsevikingsir4932 aah thats why i that it whas a gyroscope
Thanks for the enligtement
Quero uma igual... Você ganhou algumas para PATROCÍNIO... Me dá uma de presente... Eu vou cuidar bem prometo... Me dá uma
How do you convert stl to gcode
You need to use a slicing software like cura
I strongly advise against buying this printer. I purchased it in the fall of 2020 and it was out of order 7 days after purchase.
The support service on the manufacturer's website is silent and does not answer questions. The seller is also silent. The quality of this product is poor. Buy a different model.
Never printed a benchy in this review
Not worth a like
New screen theme for LK4/U30 Pro :github.com/boromyr/LK4-Pro-Screen-Theme