2019 Camaro Rear Camera Mirror Upgrade Kit Install | Gen5 DIY

Поделиться
HTML-код
  • Опубликовано: 28 окт 2024
  • Have you been in a fully equipped 2019 Camaro with the live vision rear-view mirror and say "Oh I have to have this". Now you can with this kit from Gen5DIY. This kit is available for all 2019 Camaro models (except for the ZL1-1LE), that didn't come with the live rear-view mirror from the factory. For those with 1LE models (Non-ZL1) that have the 3 piece design spoiler, our kit will come with a new center section that has the camera pre-installed into it. For those with the wing spoiler or Blade spoiler the kit will come with a new wing spoiler with the camera. If your 2019 doesn't have a spoiler, please contact us prior to ordering. All spoilers will have to be painted when you receive them.
    The kit comes complete with the following items:
    Correct rear spoiler, with camera, for your VIN#. Spoiler must be painted when you receive it, we do not ship them painted.
    New Rear-View Mirror
    Harness kit
    Please contact us, prior to ordering, with any question's.
    Kits will take approximately 2-3 weeks to ship from time of order.
    Product: www.gen5diy.co...
    Music:
    Great Days by Joakim Karud / joakimkarud
    Music promoted by Audio Library • Great Days - Joakim Ka...

Комментарии • 18

  • @ranmas2004
    @ranmas2004 4 года назад +1

    THAT IS SOOOOO awesome!!!! When I get my 6th gen going to get this!

  • @svo5045
    @svo5045 5 лет назад +1

    Great video. Will the spoiler with pre-drilled camera hole be available to sell for us 2019 2SS owners looking to switch to 3 blade spoiler? Or can you guys make a short video detailing how to retrofit the 3 blade spoiler for the camera hole?

  • @danielkruger4305
    @danielkruger4305 28 дней назад

    Can the camera and mirror display be used with just power and ground or does it need to talk to a computer in the car?

  • @2phast
    @2phast 3 года назад

    What exactly is the green wire for? Is it switched 12 volt, constant 12 volt, LInBus??

  • @Scenicpm
    @Scenicpm Год назад

    why is a power wiring needed from the K33 HAVC Control Module when there is the same power source (Circuit 539) already in the existing mirror cable?? WHy this extra effort to route the power cable to the K33 HVAC Module?

  • @frostreaper4364
    @frostreaper4364 5 лет назад +2

    I have a 2ss but want to replace spoiler with 1le spoiler so can I order just the spoiler with the hole

  • @jamiehernandez8526
    @jamiehernandez8526 4 года назад +1

    How much would it cost to get this installed 😲 I would like this installed

  • @brandhonmartinez7976
    @brandhonmartinez7976 5 лет назад +6

    Can this be done in the 2016 Camaro ?

    • @jellyii8886
      @jellyii8886 4 года назад

      Yes its the same car lol

  • @nick2jones985
    @nick2jones985 5 лет назад +3

    This video was helpful but i was wondering what you had to do to fit the camera in the wing? I have a 19 2ss with the camera in it already but wanted to change the spoiler to the acs gen 6 rear deck spoiler #48. Do you think that would work?

    • @gen5diy738
      @gen5diy738  5 лет назад

      That's a question better left for Ofer. please email info@gen5diy.com

    • @svo5045
      @svo5045 5 лет назад +1

      Hey did you ever get a response for this?

  • @1LN
    @1LN 4 года назад

    Will you guys sell just the wire harness for this set up? Thanks

  • @ParissaKhoury
    @ParissaKhoury 4 года назад

    Any solution for 2020 ZL1 1LE? The 2020 uses Camaro uses the camera to be mounted in the shark fin on top of the roof.

    • @ibraheemmirza1360
      @ibraheemmirza1360 11 месяцев назад

      Did you find anything? I’m having this issue rn with a 19 Zl1 1le

  • @alial-sajad1350
    @alial-sajad1350 4 года назад

    can this be done in 2014 camaro ?

  • @jonnyboy1696
    @jonnyboy1696 4 года назад +5

    It’s cool, not 1800$ cool