ACURA TSX CL9 : How Much Horsepower Will The Stock K24 make?

Поделиться
HTML-код
  • Опубликовано: 5 дек 2021
  • Its time to dive in to the TSX, but first we need a baseline to find out how healthy the car is.
    For those looking to buy the CT air box for their TSX click the link below:
    www.heeltoeauto.com/comptech-...
    If you would like to get in contact with Serge Bo here is the facebook link to their profile:
    / serge.bo81
    For the part numbers for all the HardRace Suspension parts you can visit:
    hardraceusa.com/collections/t...
  • Авто/МотоАвто/Мото

Комментарии • 77

  • @qamarnadhir
    @qamarnadhir 2 года назад +12

    whoever kept asking for tsx content, thank you

  • @thesilentsk3471
    @thesilentsk3471 2 года назад +11

    When the VTEC hit, I felt that.
    I can tell you stepped up quality of the content. Keep it up 👍🏼

  • @emiliosegarra8864
    @emiliosegarra8864 2 года назад +2

    Been looking forward to more video on this car

  • @DanKlar
    @DanKlar 2 года назад

    Great vid. Impressive power output. Looking forward to seeing next steps. I just picked up my own ASP3. Hoping to install in March after we thaw out a bit here in the northeast.

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      The winters out there are no joke I'm sure. I hope go throw my trans in whenever I stop working so much 🤣.

  • @MrMike8300
    @MrMike8300 Год назад

    Subscribed! Looking forward to a follow up with more mods!

  • @k24in31
    @k24in31 2 года назад +12

    Woohoo! Tsx content!!

  • @Tacticoolpapi
    @Tacticoolpapi 2 года назад +4

    Great vid. .Just picked up a 6 speed 07 a couple weeks ago for a daily. Really a bargain car for the whole package. Its going to be really hard to keep it stock.

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +1

      Keeping it stock is a struggle as the car gets more and more rewarding to drive as you add quality upgrades.

  • @Nanaehhco45
    @Nanaehhco45 2 года назад +9

    190whp is decent for the tsx, especially the powerband how it continues on. These K engines are very impressive! I'm sure with a better intake mani, headers, full exhaust, a CAI, and a tune will bump it up to 215-220whpx which is more than enough for a TSX! Map props!

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +1

      I intend to modify it further at some point. But I just enjoy it so much as is I hate to mess with it 🤣.

    • @jesselee4405
      @jesselee4405 Год назад +1

      My RSX-S with a K24a and a Z1 head put down 224hp. You bet he can squeeze some more love out of that engine. Honda is the BEST!

  • @jimvang6012
    @jimvang6012 2 года назад +1

    Awesome video! I need to dyno mines to see how much power I'm making. Mines a 06 AT with Serge's reflash with I/H/E. Not expecting much gains but hopefully near 200 😂

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      It would definitely be good to know. I'm sure the additional mods will put you over 200whp.

  • @Kantoh22
    @Kantoh22 2 года назад +6

    You are correct. Its an ASP3 trans, and it basically has the same gearing as an RSX Type S, and is a direct swap. The speedo will read a little bit higher the more it climbs, but trust me, you will enjoy the gearing, LSD, and reliability, since the casing is aluminum, instead of magnesium.

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +1

      Thanks for the confirmation! We completely expect the transmission to make one of the most dramatic changes in the driving experience of the car. The magnesium case is one of the reasons why I wanted to pull the transmission out for the aluminum Euro R one.

    • @hondalove42484
      @hondalove42484 Год назад +5

      Look up Honda part #21200-rap-000, (the 03-07 USDM Accord 2.4 5 speed manual case, same case as the Euro-R 6 speed Accords) and the clutch case from USDM Accord 2.4 5 speed manual is the same as well, just all aluminum, not the like TSX or CL9 Accords, which are aluminum/magnesium. Honda clutch case part #21000-RAP-315...Just swap over the 6 speed guts from an SI/RSX and you have a ''Euro-R tranny that will drop in all 04-08 TSX's. I am building an all aluminum case for my backup for my 06 TSX, essentially the exact same tranny as the CL7, no difference, same case, clutch case as well...KEEP THESE GEMS ON THE ROAD PEOPLE !!!!

  • @speedshack3366
    @speedshack3366 Год назад +1

    Dope ass content make more tsx videos one of my favorite platforms 🛸🛸🛸🛸 K24 all motor daily

  • @sunsetcliffs98
    @sunsetcliffs98 Год назад

    I have a 2007 Acura TSX and wondering if there is one thing I can do to jump the Horsepower? Chip? Hard to find a garage that does that type of work.

  • @tylerwill5250
    @tylerwill5250 2 года назад +5

    I wish there were more parts for the gen 2 tsx. I love mine but alot of stuff has been fitted custom so far. I want a tune but idk if serge has one for the 09’s

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +2

      Contact him directly. He does have a flash for the 2nd gen TSX.

    • @banlmao1707
      @banlmao1707 2 года назад +1

      The gen 2 tsx is ugly

  • @waltercatalan1294
    @waltercatalan1294 2 года назад

    Will you be upgrading the final drive as well? It will be the best time to do so. I’m sure there is a lot of options for that Honda transmission, lol

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +2

      That I won't be doing. From what I've read the Euro R gearing is just right. Hopefully we can get to it soon.

  • @christophertorres1940
    @christophertorres1940 2 года назад +2

    Hey man if you got some time what are the part numbers for all the hard race stuff? I picked up a set of fortune autos for my cl9 and want to do the suspension mods deemed necessary after lowering it for daily/spirited driving use

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +1

      We can certainly do that. Check in 24hours. I will make sure to add them to the video description.

    • @andersonadrian69
      @andersonadrian69 2 года назад

      @@blipshiftapex9047 yea maybe another option for a budhet version that's better than oem

  • @Tantium
    @Tantium 2 года назад +1

    have you dynoed it with the serge header? I'm looking at getting one curious how it does : )

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +1

      Not yet. Still waiting on a couple of additional bits to come in first.

  • @htyyc
    @htyyc 2 года назад

    Hey did you get the header from Serge recently? like in the last few months?

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      It's been 4-5 months. Plenty of people have received them recently as well.

  • @andersonadrian69
    @andersonadrian69 2 года назад

    So I hit a curb recently and ruined my passenger side suspension. Bent lower ca and upper spindel. What kits would you recommend for changing out the whe front suspension? Aftermarket not oem. But also not racing/expensive. Just wondering

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +2

      Moog brand control arms and suspension bits are high quality aftermarket parts.

  • @CortesGamingPR
    @CortesGamingPR 2 года назад

    How come you didn’t do a cold air intake? That’s what I did to mine and got a couple of more HP

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      Commiefornia cops would be less likely to care about a airbox that looks stock. CAI gains HP but loses TQ most times. But this is in the interest of seeing where the car is at not making max HP.

  • @zaytyga
    @zaytyga 7 месяцев назад

    Hace you ever did a 0 to 60mph run? If so what were your numbers?

    • @blipshiftapex9047
      @blipshiftapex9047  7 месяцев назад +1

      No, I've never been interested in straight line numbers.

  • @moonship1946
    @moonship1946 Год назад +1

    I have a 05 tsx engine in my 98 civic 230 whp

  • @beasona9
    @beasona9 2 года назад

    Question 🙋‍♂️
    How do I get in contact with serge Bo so I can get those headers?

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      Facebook only from what i know.

    • @craiggreen4388
      @craiggreen4388 2 года назад

      He does use some of the Accord forums also. There's an agent operating in the UK on Serge's behalf.

  • @frankflores1917
    @frankflores1917 2 года назад

    Where did you purchase the trans and what did it cost if you don’t mind me asking?

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +2

      We found the transmission right before prices sky rocketed last June for $900. It was purchased from someone who bought it from HMO here in SOCAL.

    • @frankflores1917
      @frankflores1917 2 года назад

      @@blipshiftapex9047 Oh, I see. I feel like the same thing is going to happen to the k24. I need to buy one soon before they go up in price.

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      @@frankflores1917 yes. These transmissions now go for $1400-1600

  • @PLUTORUSKI
    @PLUTORUSKI Год назад +1

    What’s the wheel size and tires and suspension?

    • @blipshiftapex9047
      @blipshiftapex9047  Год назад +1

      All that info and more is in our previous TSX videos. 😉

  • @athiam152
    @athiam152 2 года назад +1

    Is that 190whp? How many crank horsepower would then be?

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      I'm sure if you put it in some sort of calculator online it would give you an estimate. But I'm sure it would be close to 200-210hp. Which is close to what it was rated when new.

  • @DreEzed
    @DreEzed 2 года назад +1

    Hehe i dynod my tsx on that same dyno. I was at 169 at the hubs

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +2

      Nice, I hope to see more people comment so that we can get a general consensus of what a completely stock TSX would be. I am very happy with 190hp. We hope to see close or over 200whp with the header and exhaust.

    • @DreEzed
      @DreEzed 2 года назад +1

      @@blipshiftapex9047 yeah i wonder how different the mainline dyno compares to others. Ill be taking my car to chris for tuning too.

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      @@DreEzed they can vary for sure. But the more important thing is to go to the same one consistently so that you can measure actual gains on the same Dyno. Glad to see more TSX people comment 👌

  • @6N2GTI
    @6N2GTI 2 года назад

    May I know your tcf value in your dyno?

  • @felixosorio4644
    @felixosorio4644 2 года назад

    Does Serge Bo ha a contact besides Facebook?

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      Not that I know of.

    • @felixosorio4644
      @felixosorio4644 2 года назад

      @@blipshiftapex9047 he sure is hard to get a hold of I’ve texted him on FB no response that was about a month ago 😔

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +1

      @@felixosorio4644 it can be slow goings with him. Understand hes gone through health issues before so be patient.

  • @kietquach5230
    @kietquach5230 2 года назад

    Where you get a sergebo header?

  • @luisaguilar9907
    @luisaguilar9907 2 года назад

    Could I run a k24a instead of the k24a2??

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      In your tsx, yes you can.

    • @luisaguilar9907
      @luisaguilar9907 2 года назад

      @@blipshiftapex9047 witch is better k24a or. K24A2? Would I loose power or something and would I need to tune

    • @luisaguilar9907
      @luisaguilar9907 2 года назад

      Greatly appreciate you for your time.. gracias

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад +2

      @@luisaguilar9907 the 06-08 TSX K is the highest HP Stock K series motor for U.S. cars. Its really a matter what your are going for. I'm sure mods will make up any difference.

    • @luisaguilar9907
      @luisaguilar9907 2 года назад +1

      @@blipshiftapex9047 I appreciate your feedback back bro...much love and congrats on ur build...tsx squad

  • @beasona9
    @beasona9 2 года назад

    The weapon r are too expensive and I’d rather support a normal person

    • @blipshiftapex9047
      @blipshiftapex9047  2 года назад

      I agree. For what they are, the cost does not outweigh the benefit for me.