Thank you for the video! I'm getting ready to dive into mine as it has started cutting out intermittently. Hopefully just needs a clean, but i may also replace rhe items you recommend. I'll let you know how i go 🤘
Thanks You Mister le pido por favor dar una cátedra de como. Debe llegar y cuando debe llegar las corrientes de voltaje el mio la tierra que llega al cable mas delgado que hay ala hora que enchufo se desaparece en si lldebe llegar un negativo o un pulso negativo como al negativo de inyectores ?
@KillShot ZX14R Thanks for the great video..! My pump is running with ignition on, car not started... Do you think maybe the same transistors causing the issue?
Hi there. Thanks!! I have done extensive research and could find mo other issue for pump staying on with ignition off than the pump itself. So this will solve your issue for sure. If not, its so cheap to repear its worth a shot. Let me know if you fixed it.
Any idea if that cleaning will help for pump to be quieter ? Mine is loud at all times but work as intended. Well sometimes when worm it steering is bit harder but my main concern is noise
Hi, thanks for the video! My mini cooper s r53 pump would not shutdown even if i turn off ignition and remove key. It only stops when battery is removed! Any suggestions on what could be wrong? Also what fluid are u using to clean up, and what soldier should I use to re-attach?!
Good day. Was the same with this pump. And when replacing those resistorsnit worked fine again. On this PCB i just used a normal soldering iron and flux nothing special.
So did this fix your always on PSP? i have same issue and a replacment is hard to get or super expensive... Never mind i read all the replys. seems in Australia cant get the ones you have on the video (FYI its very hard to read on a laptop and the colour you picked) but i can get the IRF3205 110A/55V ones. so will give that a try. beingg its 1 year on from video post, has there been any issues with not using the exact same diode?
hello, you wantedto know if you would like to send me the numbering of diode codes (the small parts) that l publish in the video, l can no longer find them ,they ere the ones that appear in a circle
I first cleaned it to do a test, but was still the same. Then i changed the 2 transistors only and its fixed now! So happy as a new one is really expensive.
![[BLACKSWAN] ‘Roll Up’ Official Music Video](http://i.ytimg.com/vi/ulvCwyKrwqw/mqdefault.jpg)
Wow great video! I didn't think nobody else would have this problem but i guess im wrong but thanks for sending me in the right direction brother!
Complimenti bellissimo video, per noi che possediamo una mini cooper r53 e di grande aiuto per la riparazione fai da te.
Grazie
Roberto
Thank you!
Thank you for the video! I'm getting ready to dive into mine as it has started cutting out intermittently. Hopefully just needs a clean, but i may also replace rhe items you recommend. I'll let you know how i go 🤘
Please do. It's always interesting to know. We can all learn from one another.
any changes after cleaning it?
Hi! Good video, i have a question, my pump got water inside and now it doesn't turn on, could it be due to a condenser?
Thanks You Mister le pido por favor dar una cátedra de como. Debe llegar y cuando debe llegar las corrientes de voltaje el mio la tierra que llega al cable mas delgado que hay ala hora que enchufo se desaparece en si lldebe llegar un negativo o un pulso negativo como al negativo de inyectores ?
@KillShot ZX14R Thanks for the great video..! My pump is running with ignition on, car not started... Do you think maybe the same transistors causing the issue?
Hi there. Thanks!! I have done extensive research and could find mo other issue for pump staying on with ignition off than the pump itself. So this will solve your issue for sure. If not, its so cheap to repear its worth a shot. Let me know if you fixed it.
@@killshotzx14r47 thanks il give it a try 😁🙏
Any idea if that cleaning will help for pump to be quieter ? Mine is loud at all times but work as intended. Well sometimes when worm it steering is bit harder but my main concern is noise
Not sure if it will, if the noise comes from the hydraulic pump side it wont help. It its on the electric motor side then it will definitely help.
Hi, thanks for the video! My mini cooper s r53 pump would not shutdown even if i turn off ignition and remove key. It only stops when battery is removed! Any suggestions on what could be wrong? Also what fluid are u using to clean up, and what soldier should I use to re-attach?!
Good day. Was the same with this pump. And when replacing those resistorsnit worked fine again. On this PCB i just used a normal soldering iron and flux nothing special.
So did this fix your always on PSP? i have same issue and a replacment is hard to get or super expensive...
Never mind i read all the replys. seems in Australia cant get the ones you have on the video (FYI its very hard to read on a laptop and the colour you picked) but i can get the IRF3205 110A/55V ones.
so will give that a try. beingg its 1 year on from video post, has there been any issues with not using the exact same diode?
Hi there. It fixed my problem. And still going so im satisfied. Hope you come right with yours.
What is the diode number?
Hasn't replied and said he'll put it in the description. Guess not.
@@spyder5571 its on the screen the number for the transistors. Only parts i replaced so was the only codes i took note of
hello, you wantedto know if you would like to send me the numbering of diode codes (the small parts) that l publish in the video, l can no longer find them ,they ere the ones that appear in a circle
Mine has the same problem, still on.
Did you change the transistor or just clean all electric parts? And if you just clean it it works after? Thanks.
I first cleaned it to do a test, but was still the same. Then i changed the 2 transistors only and its fixed now! So happy as a new one is really expensive.
@@killshotzx14r47 thanks, I can't find the transistor with that number there are with different A and V, which is right?
@@sebastianop.3052 i could not get the exact needed one but this is the closest. There is a global shortage. Go for the IRF3205 110A/55V
holl