UR Shop Tour: Behind the Scenes at Ultimate Reloader
HTML-код
- Опубликовано: 26 июл 2024
- Full Story: bit.ly/2D2ZH1d
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
You've asked for it, and here it is! The Ultimate Reloader shop tour (August 2019). This started out as a training exercise for my new cameraman, but I love how it turned out so I decided to publish it!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RUclips channel (gavintoobe).
Any reloading data supplied on this RUclips channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RUclips channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RUclips channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RUclips channel (gavintoobe) or in this video.
I am supremely jealous of this space.
Thanks- you guys need to come and visit... :)
@@Ultimatereloader whoa for realz ??? man I would love to come for a visit, and work a project of some kind .. .you know, kinda earn my keep while sticking around a day or so :-) I feel the same about Wranglerstar, too ... you guys are inspiring!
dunno if you guys gives a shit but if you're stoned like me atm then you can stream all of the new series on instaflixxer. Been streaming with my gf these days xD
@Paul Kayden definitely, I've been watching on InstaFlixxer for years myself =)
this looks like northeast WA. awesome set up!
While I love your shop I love everything about your story.You are truly blessed to be able to do what you like. You are a very rich man and I hope you know it. What is best is you are doing it while you are young and can enjoy it. I am afraid I waited too long. My wife and I always dreamed about living like you and have even bought a large amount of land in north Florida with plans to build there. The problem is, time passes faster then you think. I am afraid I spent too much time making money to enjoy it. Now I am old, in poor health with money to burn and what the F good is it. My biggest hope is you have inspired others to reach for a dream and do it, as time waits for no man.
Thanks.
john price: Yeah - bro, you told my story, you must be reading my mail. You ain't alone.
Sorry to hear about your poor health. To some degree I'd wager the grass is not greener on the other side. My shop is good enough. I'd rather pay a gunsmith to build me a rifle. Although I only have a couple of acres, it borders thousands and thousands of acres of state game lands and wildlife conservation territory that I do not have to pay taxes on-LMAO. Mr. Toobe engages in marketing and I'd wager
he benefits from it. Enjoy your life and don't feel like you've missed out. Best wishes to you and your wife.
john price;
For god sakes Man, take an apprentice.
A bright young man with ambition, and a thirst for knowledge.
An honest soul with little future to look forward to.
Then give it to him when you can teach him no more.
Give him the future he deserves.
@@socalgeek93 lol bum, you're exactly what's wrong with the world. What a sleeze
I'll be launching an FFL 06 with production scheduled to begin January 2021.
I will remember these words, and strive to learn from your experiences.
Thank you.
I've been watching you for a long time and I must say you are living the dream . I'm a lifelong outdoorsman brought up in a machine shop my dad was a machinist which led me into that career. To accuracy gunsmithing target shooting competitor several different disciplines. Kind of wondered about you at first but you really got it together looks good. keep up the good work
Your early videos got me into reloading and yes your shop was very spartan in the beginning. It’s nice to watch someone’s hard work pay off and grow.
Thanks 👍
I hope you're not boomer. I hate to stereotype, but boomers will go down in history as generation that ruined America. Sorry to some of you boomers out there (my dad was one) but I feel like I inherited a world in decay.
My favorite thing is your grandfather's work bench. You are surrounded by great beauty and a lot of really nice machinery, but your grandfather's work bench to me, is something that is priceless and you have stewardship of it. The Chevrolet truck is cool too. I am happy for you. Thank you for sharing this with all of us. Really cool tour.
One of two things will happen in time when you rewatch this. You’ll laugh at yourself for having something where it was or you will be surprised that something hasn’t moved since haha. What a great looking shop you have there man. Definitely inspiring, thanks for the tour hopefully I can make it up sometime!
you have an amazing shop.
Absolutely blown away by your setup. Seeing “behind the curtain” I can now see your passion and obsession with the details. I’m glad you get to do what really drives you.
Cool old truck! Love the shop and your location too!
Great area, great workshop, friendly owner.... Wow! If I ever travel to the USA, I would love to stop there. Many greetings from Germany and happy reloading, Dennis
This was a great video. Thank you for giving us a window into your life. You have an amazing shop with so much potential ( which you already know). I frequent your channel for inspiration. Keep up the hard work.
Awesome mad scientist lair Gavin! Thanks for letting us in to see it
Sweet tour of the shop, ty... side note: I once saw a passive solar hot water set up with a south facing fence, manifold , black garden hose encased behind acrylic, hot water quantity depends on length of hose after initial cost it runs free spring, summer, & fall.
You sir are living the ULTIMATE Dream!
Love it and envious doesn’t come close to describing how I feel!
Amazing space and design, not to mention true freedom living on acreage. Definitely inspired me to design and build something similar on my property, now that I’m in the country. Thx for all you do!!!
Thank you so much for inviting us into your domain, I loved it man! Keep up the good work!
Just absolutely awesome! I find pleasure in imagining you in your shop reloading and testing guns. Best of luck with that shop.
This was a very fun tour. Thank you for sharing it with us.
You just gave me something to strive for again, BEAUTIFUL setup !!
What an inspirational experience its been to watch the videos, the informative tips, and above all, the earnest and dedicated passion. Very best wishes Gavin, for making a burgeoning success of it all. John Weigel - Australia
Glad you enjoyed it!
I’m so jelly!!! Great property and reloading room!
Thanks for doing this! Been looking forward to it for a while!
Love the shop! Unfortunately I possess none of the 3 "T's" - time tools, or talent, lol. I'll have to continue to live vicariously. Keep up the great work!
What a dream Gavin ... Awesome man ... you gotta love it! Thank you
Awesome shop/residential paradise! You do an amazing job on all of you're videos. I'm just starting to get my feet wet in reloading and enjoying your reviews and information passed on to us. One other plus after watching the walk threw of you're amazing shop is you keep it real for people starting out to the more experienced reloader's.
Very cool. Thanks for the tour!
I am green with envy. Congratulations for having such a first class set up in such a terrific location.
Sweet set up. You made mention about your shop air. Let me make a couple suggestions. First, do not use PVC pipe for a couple reasons, first being safety. If and I hope this never happens to anyone, you were to have a fire, the PVC will naturally melt which is opening the flow of air, which is going to help fuel the fire until your tank is empty, and if you didn’t shut the compressor off, you now have a pump sending air. Part 2, is fitting joints failing which can blow the joint apart and could injure someone. I gave this exact advice to one of my associates when he built his shop a few years ago. Just recently he told me that he has to replace the piping do to clue joints are popping apart. Use Black pipe and do a loop system to minimize pressure drop. Again sweet set up, thanks for sharing.
love the shop but you need a metal shaper( cut dovetails- inside keyways- t-slots)- die filer- keyseater ( cut raceways to make rifle actions)-and a vertical slotting machine (make ar-15 barrel extensions)
Way cool! I did enjoyed. Yes, inspired. Thanks for posting!
What a dream shop seriously. Thanks for sharing man!
Awesome tour of the Shop! Thanks Gavin!
Absolutely amazing
Thanks for sharing all of your content Gavin. I’ve been new to reloading this year and seriously appreciate how much you nerd out on this stuff. Very helpful for the rest of us.
Simply amazing. Congratulations.
So awesome! Living the dream!
Love your shop! You're giving me some ideas.
Glad you finally did this video! I aspire to have a similar setup someday! You were a huge help when I was beginning reloading!
Awesome to see the UR Ranch!! Thank you so much for sharing this Gavin.
You are welcome Dan! :) Glad you enjoyed the tour!
Yea heck of a Nice shop. Beautiful property too.
Without viewing the entire vid, I am already liking it very much! Now to return to the vid. Many thanks!
Thank you for sharing!
Awesome location, and shop, two thumbs up
Great tour man, I look forward to more videos on the mill and lathe.
It's more of a gun "lab" than just a gun shop. Sweet!
Gavin is really well educated in terms of engineering, scientific research and gunsmithing. He has combined it all to the betterment of all the rest of us. Thanks Gavin!
Thanks for the tour, nice to see the setup.
Thanks for the tour Gavin!
A small electric on demand water heater could supply enough warm/hot water for your sink; it only uses juice when heating water and to prevent freezing.
Cool shop! When we built our house we built a 3 car garage and closed one 'bay' in as my reloading room. It's my Oasis. Heated and air conditioned (mini split) with 3 walls covered in bench space with cabinets. I like it being attached to the house so it's not like I'm leaving the family to go 'work in the shop'. Been a subscriber for a loooong time. Keep up the good work!
Little piece of heaven!!
Thanks for sharing Gavin.
Dude, that's a great setup you have. Keep at it! Love the show - learning a lot thank you !
I have had this same idea for building a garage for awhile now, only difference is I was thinking of using 4 shipping containers, and Burying two of them then stacking the other two on top of those then digging out the dirt between them to create a kind of in ground garage that Extends out of the ground, it would allow you to have a pretty tall garage that doesn’t stick to far up off the ground
very cool. amazing setting
Living the "Dream"...awesome!
Bad Ass Shop in Mountain Dreamland! VERY Inspirational! Rock On Gavin!
Incredible Shop / Lab! I have even more respect for you now that I have seen your setup. You are the Most "ULTIMATE RELOADER"
Thanks for the tour , my shop is about half that size and I have that same feeling of freedom and the capability to create.
Great set-up Gavin, I just hope you never decide to move!! Cheers from Australia.
I'm new to your channel and learning a lot- I know this is one of your older videos but what a shop absolutely incredible, thank you for being there for us and teaching
Awesome setup! Definitely a bit jealous, especially of the tooling!
Nice tour. Thanks for sharing.
I just love the way you think and do things....
Gavin, my Dad sent me a link to one of your videos and I just think you are awesome! Thank you for your time and effort in doing this. You are doing a really good job.
Love it! Been watching your channel for a while now and I’ve been intrigued with the shop space. Inspired to replicate what you have built. Keep pouring it on us!!!
Awesome, glad you liked it! Good luck with your build if you do one...
Good video, thanks for the insight of your shop.
That’s an awesome shop. So much high precision plus machines from WWII. Grandpas work bench is probably my favorite part.
Heaven on Earth. I am so happy for you Gavin.
Awesome. One day when I grow up I to shall have a shop like this one. So nice to see someone being able to do what they want when they want and how they want. Thank you for sharing. Waiting for more vids.
WOW. So Amazing.
Really cool . Nice work Gavin.
Merica, looks like your living your dream. Keep it up, love your content
SWEET! I really enjoy your channel. Thank you.
Liked, shared, commented
Awesome tour!
Enjoy each and every video. Chuck full of useful information and data for the shooting enthusiast. Thanks for this shop video. Very informative.
Great man cave! Needs tidying but that’s part of the fun!
BEST set up & I enjoy your videos The 1000 yd range is extreme !
Excellent video. Love the shop .
Perfectionistic overkill! Words to live by!
Definitely looking forward to your 8’ bench kit!
Awesome set up there Gavin . I’m sure I speak for everyone of your subscribers when I say that we love your passion and enthusiasm and admire your machining skills , your technical knowledge of all things firearms and reloading related that you share with us . Keep up the great content.
Thanks so much Jim!
Just keep up the good work!
You are a great teacher!
I will be giving some serious thought to building a container-based shop now that I have seen yours. I now have a shop with a parts washer, bench grinder, inspection/layout area, a 14 1/2 "x 72" South Bend lathe, a 9" by 30" S.B. lathe, same size Clausing lathe, an Enco bench mill, welding area with gas, stick, MIG, and TIG, all in a 12'x 26 ' shed. Can't keep it clean or organized. Have to move a bunch of crap whenever I do anything. Love your ideas.
Hey Gavin! Enjoyed your video. As a young child back East I have always wanted wide open spaces and like yourself I always associated it FREEDOM! Stay healthy.
Bardzo inspirujące doświadczenie. Masz świetne warunki. Faktycznie tak można wyobrazić sobie prawdziwą wolność. Trzymaj się, i rób dalej swoje. Jesteś niesamowity! Pozdrowienia z Polski! 🇵🇱
Incredible shop!,
Ok. You've achieved great strides in life. What's most impressive is you share what you've learned. That is impressive.
Thanks for showing us around.
Happy to :)
REALLY nice!!!!
Awesome setup !!!
Great setup man!
Gavin, as a Truss / Engineered beam designer, I say way to go man!!!
living the dream Gav! NICE!!!
Love your setup! As John below indicated, you are blessed to have your youth along with your dream setup and be able to enjoy it. I am middle aged and have a few years yet, God willing. It is my dream, as I am sure most others, to have the land and facilities to do what you do. I am very into firearms and building them. I am loosely an "amateur machinist" with very little formal training but like to dabble and try stuff. My wife and I are trying to work towards a larger land purchase in the woods to either build or fix up a fixer upper and where I can shoot without any worries. Both of our priority is to have an outbuilding for my collection of tools, pew pews, and hobby stuff. :) Always good to have the blessings from my better half on that part. The shipping container method you used seems to be a very good affordable option, thank you for showing us that. Thank you for all your content and I look forward to more videos.
Thanks for the tour. Very nice shop. I lived in a shipping container in Papua New Guinea for a while. Pretty nice accommodations.
Wow, amazing property- I'm inspired!
My dream set up! Awesome!
Great setup! 👍
You sir, live in total freedom.
That’s a awesome garage bro I really like how you build it 👍👍👍
Love your definition of Freedom... agree entirely. Thanks for what you do. I enjoy it thoroughly, and have learned much watching the channel.
Thanks, nice to talk to another person that has the same definition of freedom :)
@@Ultimatereloader I'm not as 'far out' from the world as you seem to be cuz I still have to work and have fast internet at home, but I have some land, some privacy and almost verbatim share your words about liberty. I need to go ahead and get some suppressors now .... then my three neighbors wouldn't know a thing :-)