6:01 I wish had found your video sooner. My belt broke, so I didn’t have to remove it. The other tutorials made it so complicated to put the belt on. Thanks for explaining how easy it is to push back the tension bar for the initial & final step.
Guys, Here is our Savior YaH The Heavenly FATHER (Genesis 1) HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF” From the Ancient Egyptian Semitic: "Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3) Ancient Egyptian Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
This video was just what I needed. Too bad it wasn't available three years ago when I put my belt on the last time. This video streamlined the process greatly. My belt didn't break and was not very worn. For some reason it just came off the rear pulley. I did one thing differently from your video. Instead of loosening the nut on the tensioning pulley I put a socket and breaker bar on it. Then I pulled the tension bar from below to release the belt tension. I used a block of wood on the top of the deck to hold the socket and breaker bar which kept the tension loose so I could put the belt back on the rear pulley. This only worked because my belt was already on the mower and I did not have to replace it. Your video was the key though. I am very thankful for it.
Thank you for this video. I have a Z335e and my belt was already broke so I have to take the spring tension to lose the pulley ones I did that the process was easy. Thank you again for taking your time and doing this tutorial.
I wish I had looked at this before I changed my belt today. I droped the deck which is not that hard. But getting the deck back on was a real pain in the butt.
Is there such a thing as “timing” the blades with the Z320R? I just upgraded from a Toro Timemaster 30” and any deck work required ensuring the blades were timed so they wouldn’t collide with each other? I ordered the mulch kit and will be switching out the blades as well. Great videos and TIA!!!
@247parts2 the belt from my Z315E came off and I am having a hard time putting it back on. I can't seem to find a video on the model I have. The belt guard on the right side can't be lifted as the frame is directly over it. Can you help?
6:01 I wish had found your video sooner. My belt broke, so I didn’t have to remove it. The other tutorials made it so complicated to put the belt on. Thanks for explaining how easy it is to push back the tension bar for the initial & final step.
Well I am glad I could help! I'm not sure why everyone makes this look so hard to do.
Guys, Here is our Savior
YaH The Heavenly FATHER (Genesis 1) HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF”
From the Ancient Egyptian Semitic:
"Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Egyptian Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
This video was just what I needed. Too bad it wasn't available three years ago when I put my belt on the last time. This video streamlined the process greatly. My belt didn't break and was not very worn. For some reason it just came off the rear pulley. I did one thing differently from your video. Instead of loosening the nut on the tensioning pulley I put a socket and breaker bar on it. Then I pulled the tension bar from below to release the belt tension. I used a block of wood on the top of the deck to hold the socket and breaker bar which kept the tension loose so I could put the belt back on the rear pulley. This only worked because my belt was already on the mower and I did not have to replace it. Your video was the key though. I am very thankful for it.
Just changed my belt on my z230r, and your video was great. Although the newer model routs the belt a little differently.
I just put a new belt thanks to YOU!! I appreciate your easy to follow instructions! Thank-You!
Nice! I am glad I could help and thanks for watching!
Thanks - perfect for fixing my Z345R
One thing I’d add is to lower the mower deck to the lowest setting to give yourself some extra room to work.
Yes, that is a good point and I should have said that. So you were able to fix your mower with this video?
@@247parts 100% followed step by step (saved time by cutting my old belt out) on installation and was done in 25 minutes.
@@247partswould like to see a belt replacement on a Z520A 60 inch
Thank you for this video. I have a Z335e and my belt was already broke so I have to take the spring tension to lose the pulley ones I did that the process was easy. Thank you again for taking your time and doing this tutorial.
I really like mine 230r very nice and easy to work on and mows great!! Very happy ! Glad I bought .!!
Nice! Always happy to hear of a happy customer!
Thanks!! You saved me alot of time and trouble.
You are welcome and I am glad I could help!
This video really helped me with changing my my z915b belt. Thank you so much!!!
Thank you for the video. It worked just as you said.
You are welcome. I am glad it worked out well for you!
I wish I had looked at this before I changed my belt today. I droped the deck which is not that hard. But getting the deck back on was a real pain in the butt.
Very well explained how to video. Thanks much keep up the awesome videos
Is there such a thing as “timing” the blades with the Z320R? I just upgraded from a Toro Timemaster 30” and any deck work required ensuring the blades were timed so they wouldn’t collide with each other? I ordered the mulch kit and will be switching out the blades as well. Great videos and TIA!!!
Good thing is you do not have to worry about timing your blades. The deck design will not allow the blades to collide.
You're a legend, thanks mate. I wasn't pulling the tensioner back far enough, confirming this works perfectly for a 2021 Z345R
Are the EZT trans serviceable in this model? I know previous 2200's were not, as of 2023 service ports are optional
I will look into this.
Very good video....
This guy allowed me to put my own belly on in one try
What is the belt size for a z320m 42" deck
What’s the belt size for this??
Wish you’d just show a picture of the deck off and belt route
ISO part number for deck belt john deere z315 e
How do you change a belt on a John Deere X350 riding mower 42 inch deck?
This is one I will have to get a video on soon.
@247parts2 the belt from my Z315E came off and I am having a hard time putting it back on. I can't seem to find a video on the model I have. The belt guard on the right side can't be lifted as the frame is directly over it. Can you help?
Is your deck different than the one in this video?
I figured I had to lower the deck to its lowest point. Thanks for the video
Great video. This helped me a bunch. I have a Z345R.😀
I think the 2024 model is different mine doesn’t follow this video
Thanks
the parts number for this Belt Ztrak 42'' please Tanks in advance
What model?
@@247parts 2023 Ztrak 315E
This is the biggest PITA.
Yes, yes it can be.
A conch compared to a Ford Escort timing belt. Nearly the same size engine.
I have a z325e, can you make a video on that 48 in model I can’t find anything about that one.
I will add this to the list!