You have definitely earned my sub, the knowledge and effort put into these videos are second to none. You and Kevin Talbot are my top 1, (both share number one) in watched videos. Whoever's is out first I watch instantly. Keep up the great content!
Just ordered mine. Strangley it cost me less than I originally paid for my 144001. Loved my original (despite some teething problems). Can honestly say had just as much fun with it as I have with my Arrmas. Only downside is, something breaks then your left waiting on parts as they arent readily available here.
Cool vids as always. I have been surprised that this brushless one got very little fanfare after everyone raved about the original brushed so much. I wanna see if you guys smoke it or not on 3s.
Try a 100c 2s you'll get nearer 45mph. 3s and you'll need to reduce the steering rate quite a bit, good luck the wheelbase makes it super twitchy with the extra punch
I've ran a 124017 V2 daily for several months. It eats rear diffs on occassion (every few months) and bends the crap out of front axles in hard wrecks...but overall has been solid.
I'd love to see a compairison between the 144010 and the 124017. I know it's 1/14 vs 1/12th scale, but that also steps up to a 550 brushless and a better length to width ratio. I personally play with a highly modified 959A. I've swapped in a brushed 550 with cooler, changed the spur and pinion gears. It also has an aluminum chassis, shock towers, central drive shaft, steering linkage, all the suspension components, shocks, and new bearings everywhere. This thing is a BEAST. I'm working on sorting out a cooler to attach to the integrated ECS. The ECS/Rx has been swapped out to the newer model and the battery leads were swapped for heavier cables with a Deans T connector. Running a 3S is doable for a short time, but the FETs get really hot. Even running an 80C 2S is so much better than the stock 20C 2S. I've had it up to 48MPH with a 19/27 gear ratio, but the ECS only hangs on for about 45 seconds before the FETs overheat.
Where's the 3s vid with the tweaked suspension? Go through the drive train make sure the diffs and bearings are running smooth. I've had one for about 10 runs on grass and got significant wear on the drive cups in the rear. Also got a bent dog bone, when wife launched it over a limestones wall and into the sand pit. Not sure how much of the wear is from the impact, but it's significant wear. I think there's too much binding in the read, I don't think they lubed it well, the front seems fine. I also think the high punch setting and driving on grass contributed to the excessive wear.
I think the extra $ paid for the original LC Racing platform these are all based off of is worth it. The performance and better quality parts they are equipped with, along with the US based parts distributors makes them more worth the extra money, in my opinion. That being said, sweet video and thank you for the review! Looks fast and fun!
get the 124016 , trust me that roll cage is not just for looks , i have a 124018 and my friend got a 124017 and he got a roll cage for his since it saves A LOT from heavy rolls . 144010 is nice but short wheelbase makes it really hard to control and the speed is identical a.k.a crazy on 3S . but if you ask strictly between 144010 and 124017 it's the 124017 hands down - better handling and more space inside for mods/battery.
This car is just amazing even in 2023 had mine for a year only have to oil my shocks up every once in a while and it gets a little hot but apart from that it’s amazing
Yea! I'll be havin one of those soon. Been waiting for the brushless conversion. All that youtube hype and wl toys listened. Hell yea!! Let's get it!!!!!!
6 yrs ago youdda paid double to go 40 mph & not long ago ,WLT Helicopters had Flybars. XK/WLT stuff is always innovative & affordable. The 110 Blast Heli just gotta a facelift & good just got better .
I’m not sure. I think the origin problem was the input gear not being meshed well with the outer ring gear of the diff. I never experienced that problem with mine though…. We stripped the spider gears in the rear diff. We just jammed some shoe goo in it, locked it up, and now it does wicked wheelies.
@@10thScaleGarage same here. With the locked diff, they don't turn as well and tend to spin out a lot too. I've been through about 10 of those diff over the last 2 years. Ive shimmed them and all that stuff but they always wear down. I wonder if the brushless motor will mess up those little gears even more
I have the 144001 i did a speed test on it with a 2s lipo dude im not giving u know bull how in the hell I get 42 mph I even checked the GPS in the car its dead on can u get the same cars some be faster im new at this stuff just curious I won't put a 3s in I don't waunt to take a chance of burning it up.yea bro 42 im not joking
Great video again! But… I’m still not sold on these brushless wltoys. 1/2 the fun is upgrading them yourself. I loved the journey my 124017 took me on. She now runs laser straight at +70mph, for less then the v2 brushless :)
Great video bro I've got a wltoys 124019 buggy I just made an 83mph pass with on 4s that I put together out of my parts bin the only money I spent was on a set of contact foams she runs stupid smooth and fast
I’ve seen 55+ on 3s with stock electronics and better tires. Prob only wanna do that for a few speed runs though, can’t imagine it can handle that consistently without burning up like you said.
XLF made a brushless clone a long time ago. I can say from personal experience it was insufferable rubbish!!! XLF is the kind of garbage budget RCs at an unreasonably high price.
Please don't buy this u got to buy it then send 60 on it to get it to work no point buying this just buy something that's going to work when u get it new
@@10thScaleGarage Well Considering YT has made Video's ( on my end ) that are under a Minute Look like they are on a Cellphone ( me being on a home computer ) with only Play and Pause. No Comment Section below the video because if you scroll down, the video stops and another random Video starts playing, Scroll back up and the one you were watching starts over again... So you can't read the comments while the video is playing. WHY The Fuck they started doing this?? Who the fuck knows.
I definitely want to see 3 s in that! MAXIMUM BERRIES!!!!!!
10TH SCALE GARAGE GANG FOREVER!!!!
You have definitely earned my sub, the knowledge and effort put into these videos are second to none. You and Kevin Talbot are my top 1, (both share number one) in watched videos. Whoever's is out first I watch instantly. Keep up the great content!
Just ordered mine. Strangley it cost me less than I originally paid for my 144001. Loved my original (despite some teething problems). Can honestly say had just as much fun with it as I have with my Arrmas. Only downside is, something breaks then your left waiting on parts as they arent readily available here.
Cool vids as always. I have been surprised that this brushless one got very little fanfare after everyone raved about the original brushed so much. I wanna see if you guys smoke it or not on 3s.
Give those front tires a Mohawk trimming a couple of rows off either side. Then see if it helps the track cornering 👍
Bro I love it when you said.. I DID NONE OF THAT!! 🤣🤣
Try a 100c 2s you'll get nearer 45mph. 3s and you'll need to reduce the steering rate quite a bit, good luck the wheelbase makes it super twitchy with the extra punch
I've ran a 124017 V2 daily for several months. It eats rear diffs on occassion (every few months) and bends the crap out of front axles in hard wrecks...but overall has been solid.
Definitely need one, love the look and everything else, thanks for the awesome content brother 😉👍🏼💯
I'd love to see a compairison between the 144010 and the 124017. I know it's 1/14 vs 1/12th scale, but that also steps up to a 550 brushless and a better length to width ratio.
I personally play with a highly modified 959A. I've swapped in a brushed 550 with cooler, changed the spur and pinion gears. It also has an aluminum chassis, shock towers, central drive shaft, steering linkage, all the suspension components, shocks, and new bearings everywhere. This thing is a BEAST. I'm working on sorting out a cooler to attach to the integrated ECS. The ECS/Rx has been swapped out to the newer model and the battery leads were swapped for heavier cables with a Deans T connector. Running a 3S is doable for a short time, but the FETs get really hot. Even running an 80C 2S is so much better than the stock 20C 2S. I've had it up to 48MPH with a 19/27 gear ratio, but the ECS only hangs on for about 45 seconds before the FETs overheat.
Where's the 3s vid with the tweaked suspension?
Go through the drive train make sure the diffs and bearings are running smooth.
I've had one for about 10 runs on grass and got significant wear on the drive cups in the rear.
Also got a bent dog bone, when wife launched it over a limestones wall and into the sand pit.
Not sure how much of the wear is from the impact, but it's significant wear.
I think there's too much binding in the read, I don't think they lubed it well, the front seems fine.
I also think the high punch setting and driving on grass contributed to the excessive wear.
As soon as the weather allows it.
@@10thScaleGarage awesome can't wait :)
Almost 500 within the first day ,God bless nice video
Always wanted one ,40mph on 2s is insanely AWESOME 🤠🤟🇬🇧⚡
Definitely a great RC to start.
But I out grew mine quick .
Team corally asuga is king !!
I think the extra $ paid for the original LC Racing platform these are all based off of is worth it. The performance and better quality parts they are equipped with, along with the US based parts distributors makes them more worth the extra money, in my opinion. That being said, sweet video and thank you for the review! Looks fast and fun!
Great content as always!
Question for you,
144010 or 124017 v2? Never had a wltoys before.
get the 124016 , trust me that roll cage is not just for looks , i have a 124018 and my friend got a 124017 and he got a roll cage for his since it saves A LOT from heavy rolls . 144010 is nice but short wheelbase makes it really hard to control and the speed is identical a.k.a crazy on 3S . but if you ask strictly between 144010 and 124017 it's the 124017 hands down - better handling and more space inside for mods/battery.
@@darkki94 thanks man I appreciate it!
Yup, @darkki said it perfectly. Not as quick, but you’ll drive faster.
@@10thScaleGarage thanks!
thanks for your honest and precise review!!! better than others
Time to see that 3S vid!
Nice slide into R
You could try 10k in the front diff, 7 or even 5k in the rear diff, that should calm the cornering down.
I dint think the diffs are sealed. That's why grease is the only option.
Seems pretty sweet! I'd be surprised if it can handle 3s. It would certainly be interesting to see what kind of speed it'll give you.
It says it can... it didnt...
New subscriber and aye you rockin the merry’s!
This car is just amazing even in 2023 had mine for a year only have to oil my shocks up every once in a while and it gets a little hot but apart from that it’s amazing
We're almost there! Get that 3S ready!
Ready!
Yea! I'll be havin one of those soon.
Been waiting for the brushless conversion. All that youtube hype and wl toys listened.
Hell yea!! Let's get it!!!!!!
They’re following in Traxxas’s footsteps. The entire community instantly modifies them, so they make a RTR version of the thing everyone builds.
Good question
I started back RC because of Wltoys lol
Welcome back :)
@@10thScaleGarage Thanks :)
I love your videos bro. great ideas consistently
Hey thanks!
Nice! Well, it is a Wltoys.👍🏾👊🏾✌🏾
I have mine on ordwr in transit. Can't wait
6 yrs ago youdda paid double to go 40 mph & not long ago ,WLT Helicopters had Flybars. XK/WLT stuff is always innovative & affordable. The 110 Blast Heli just gotta a facelift & good just got better .
yea remember that this can use 3S no problem and do 50-60mph !!!
Well said.
Thanks for sharing my brother🤙🤙🤙🤙
More interested in the Wltoys 104002 that is coming.
I couldn’t wait.
Can you controll it in the air by accelerating or breaking?
Good evening brother great video enjoy the weekend cool cars
Pool jump 👍🏻😎
set it up with the a arms level and it would work better.
cool rc and great overview,have a great weekend bro
Thanks buddy!
3s lets go this!
COME ON 50. CAN'T WAIT UNTIL I GET MINE
Man she's a screamer.
Very cool.
Can you rebind the remote to eliminate throttle lag i got one coming in a few weeks and wanna avoid buying a new remote if possible.
Yes.
Let’s see this!!
Car looks insane
My son just got done running his great little car out the box
Nice!!
I get 67mph on my cheap Hyper Go 16BM brushless with a 3s 2200MaH battery. 61mph uphill, 69 downhill.
Dang! That’s bookin!
Oh and I live in the Best State for R/C. What State is that? Floor-it-dah.... For those who don't speak Southern.. Florida.
Me too.
I love Florida! It’s the sunshine state!
We want to see 50!!
Me too.
Would the longer wheel base version be better handling??
500 likes reached 🤔would love to see the 3s rip in it
The shocks are weak, and bend easily, since there's no front bumper
Very promising....trust. ,I'll be picking one up🤠🤙🏼
I fully support this decision
Do it! 3s all day!
What battery are you running in it?
The one thing I hate about the wltoys 144001 is the spoiler it literally just snaps
Do It!!!
Hello from southeast alaska.
Nice colors
Did they ever figure out the diff stripping issue with the 144001? Those bevel gears were always grinding down to nothing
I’m not sure. I think the origin problem was the input gear not being meshed well with the outer ring gear of the diff. I never experienced that problem with mine though…. We stripped the spider gears in the rear diff. We just jammed some shoe goo in it, locked it up, and now it does wicked wheelies.
@@10thScaleGarage same here. With the locked diff, they don't turn as well and tend to spin out a lot too. I've been through about 10 of those diff over the last 2 years. Ive shimmed them and all that stuff but they always wear down.
I wonder if the brushless motor will mess up those little gears even more
@@otinelmeszaros9885 Me too.
I have the 144001 i did a speed test on it with a 2s lipo dude im not giving u know bull how in the hell I get 42 mph I even checked the GPS in the car its dead on can u get the same cars some be faster im new at this stuff just curious I won't put a 3s in I don't waunt to take a chance of burning it up.yea bro 42 im not joking
Yeah definitely. Plus there will be small changes like the surface you’re using, temps, gear lash, etc.
@@10thScaleGarage thanks
Gracias por el vídeo
Enjoyed 👊🏻👍🏻
Thanks for watching
Lets go 3s with some streets! Im guessing 47mph!
We’ll see!
3s it without a doubt 🙏👍
What is this size comparison to a losi mini-B
This is bigger in every way.
509 likes now, get working on that 3S video!
On it!
I really like the 124019 better personally.
Theses car break easy!
Always like wltoys still do great video friend sunscribe you kinda inspired us
Great video again!
But…
I’m still not sold on these brushless wltoys. 1/2 the fun is upgrading them yourself.
I loved the journey my 124017 took me on.
She now runs laser straight at +70mph, for less then the v2 brushless :)
I have one of those, but gave it to Ethan. I don’t know if he ever put a speedometer on it.
Like your channel 👍
Great video bro I've got a wltoys 124019 buggy I just made an 83mph pass with on 4s that I put together out of my parts bin the only money I spent was on a set of contact foams she runs stupid smooth and fast
Put 3s in it!!!
I can smell the smoke already
it may handle 3s, or it may burn up lol.....but I am guessing 45 mph on 3s
I’ve seen 55+ on 3s with stock electronics and better tires. Prob only wanna do that for a few speed runs though, can’t imagine it can handle that consistently without burning up like you said.
This isn't 1/10 buggy, it's a 1/14 buggy, pretty dang small!
Did I say it was 1/10 scale? Sometimes I make mistakes.
not to be mean but just asking, why is the quality to low on the vid
Its the theme.. “budget” 😂🤣
You’re the second person that mentioned that. It says 4K 60 on my end…. The audio quality sucks on the video. I was battling the wind. Sorry buddy.
Go for it 3 s
I gotta!
If it's windy, do a voice over instead of making us suffer to hear the info.
My 144001 upgrade does 45mph
Nice!!
I did none of that 😂❤
I like it
Might be faster, I think the GPS module adds weight which kinda slows it down a bit. Maybe use a speed gun instead
My 124017 55mph on 3s
Dang!!
I have the wltoys 144001 not the 144010
Subtítulos please
just run a arrma typhon lol
I have one. I love it. It’s also like 3x more expensive than this.
3S 50mph only ? Some dude got 60-62mph on stock one ! It's a pocket rocket for sure.
Nice!
XLF made a brushless clone a long time ago. I can say from personal experience it was insufferable rubbish!!! XLF is the kind of garbage budget RCs at an unreasonably high price.
Yeah. Eachcine made one, too. Wasn’t as good as this.
this guys teeth are nuts
Cashews.
Please don't buy this u got to buy it then send 60 on it to get it to work no point buying this just buy something that's going to work when u get it new
Mine works great. I haven’t done anything to it. Just rips
@@10thScaleGarage I must have the only one in the world that's a load of shit
Wow, So Early, it's still in 360p mode. Unless you used a shit camera?
Sorry. It says 4K 60 on my end, but it’s RUclips so who knows? Filmed on an iPhone, so yeah… $H!T camera depending who you ask. Haha.
@@10thScaleGarage Well Considering YT has made Video's ( on my end ) that are under a Minute Look like they are on a Cellphone ( me being on a home computer ) with only Play and Pause. No Comment Section below the video because if you scroll down, the video stops and another random Video starts playing, Scroll back up and the one you were watching starts over again... So you can't read the comments while the video is playing. WHY The Fuck they started doing this?? Who the fuck knows.
Who's everyone? Lol I'm not buying that Chinese knock off nor do I buy a thing from banggood or wish. Rc or not lol
WL toys sucks. 🤷🏼♂️
You must’ve hD a bad experience. They definitely make some crap.
@@10thScaleGarage yeah, the 14401 did not do the same for me as it has done for others. LC racing!!! That's where the quality is at!!