The wltoys 144010 has an annoying delay let’s see if we can fix it. here's a link to the 144010. www.banggood.c... hers a link to the 124017. www.banggood.c...
Also you can turn the controller on pull on the trigger just a little and hold it while turning the car on this fools the ESC no more delay you have to do it a few times to get the correct trigger pull for perfect running with no delay
I heard that if you do the special wltoys dance before you pull the trigger that it's fixed 🙄. Seriously how could they bring this on the market like this?
just got my 144010 today, very dissapointed with throttle delay. swapped over to 144001 controller and heaps better. blue wheel radio 4 digit number, tried that on my 144001 & yep delay as well. so its definitely the radio. this model wltoys car unbeatable for bashing, have done close to 90 charges on batterys & pushing it really hard big jumps landing on concrete plus abuse from my two grand kids. have only had two replace brushed motor & keep screws and bolts tight. My expensive carpet racing cars wouldn,t take the same abuse. cheers
I bought the one ending in 17 version 2 and it is my first "real" rc car. Arrived yesterday, and I noticed the throttle delay. My controller does infact have only 4 numbers like yours that also have delay. Yeah maybe I have to buy another controller. Thanks for the video! Greetings from Sweden!
I believe they advanced the timing on the v2. Which is what got rid of the cogging issue. Great find on this controller issue, as I have not opened my version 2 yet. I will definitely check that out! Thanks my friend! Really awesome channel! Keep up the great content!👊🏼💯🔥✌🏻😃
Been waiting for someone to make this video.. what i did is swap the electronics of an old controller to the stock remote.. makes so much difference.. for the 144010
G'day mate, just watched you show about delay on 144010 , got my new 144010 bloody grouse or what, doesn't have any delay at all, stock controller has a sticker number 2266 where you showed us.WL Toys may have fixed that problem,they sure have taken faults in hand, good on you WL Toys if you read this. Keep up the good and interesting work mate thanks Peter
I got my 144010 v2 yesterday with a four digit number on the tx. Very bad throttle delay is what I get… I will try binding it to my Dx5 tomorrow and see if the delay dissapears
Hi, My new brushless 144010 arrived yesterday and there is a delay on the throttle. Its impossible to make corrections over jumps! I have a blue wheel transmitter with the code "0542". Its a cracking little car once you pull the trigger and it starts moving.
Unfortunately I think it affects them all. I think the cheapest option is to get an original transmitter which should solve the problem. Hope your having fun with it though.
There was also a suggestion made, that rebinding the controller might help. And other yt video claimed its actually an esc fault. They're very cheap components and a person had replaced esc, got delay solved this way. Esc was acting like a working esc
Yeah just got a 144010, it has a delay. It doesn't bother me in the park at all. I did notice it when it tried to test it slowly in the house when I first got it and couldn't drive it slow or smooth. However I don't really drive this car slow anyway.
I think my one is cogging because I put my foot in front of it and it was just like juddering I don't know if you can give me some advice does your one do this thanks
The delay is massively annoying. So I bought a Dumbo radio for it. I have both the 124017 v2 and the 140010 (also v2 electrics) and they both have the delay which is why I completely ditched the factory radio system.
I have a 124016 and it has the exact same issue. I’m not new to re, but I am new to the world of rc cars. I let my friend drive the car and the first thing he noticed was the delay
Mine doesn’t. Have tried many times and different combinations: holding button on receiver then turning it on, then turning on the transmitter. Otter way round. Not holding the button. Etc. no luck. Any ideas?
New update from my 124017 v2 with 4 number controller, finally delay issues have been fix(I'm just select BIND button on receiver😹 you guys have issues with this 4 number controller can tray this method, hopefully can help.
J ai une 144010 et j ai aussi le retard mais en fait il correspond a un "défaut" sur la gâchette, il y a 1cm de jeu sur la gâchette vers l avant et l'arrière. La piste du capteur de la gâchette est de mauvaise qualité
Just got mine today. Indeed a throttle delay. I just start slow and then it's fine. Ran great. At the end, the throttle stopped but the steering still worked. No bashing, had the speed turned down to get used to the delays. Did something break or was the battery just low? Steering was fast but no throttle.
@@noobrccars4392 Yes, I tried it again today after recharging and it worked just fine. My other wltoys rc runs until it's dead dead. No steering with no throttle issue. I'm just glad it's not broken bc I lack Kevin Talbot level repair skills lol.
Thank you so much. I bound my 144001 controller to the 144010 and it worked, no more lag. And when I bound the 144010 controller to the 144001 there's no lag. Win win
I should receive the 144010 in the next few weeks, fingers crossed, so any improvements I can make are most welcome. Could you dial this delay out with a programme card?
Hallo have you try the buttons on the radio the one on the side if you push on that button than his goiing faster when you push the gas on I have try that abd he goes better.respons greetings I have the one with the little number and now his faster when push no relay greetings
I believe, the reason why WLTOYS so cheap, because they put cheap tech transmitter and esc. Been played my Tamiya using Futaba transmitter long time ago with my ex company driver who own China RC model (i don't remember the brand name), the one thing that i got notice, is the quality of their transmitter and esc.
@NOOB RC CARS what is a good value for money WLtoys rc car, also where is better to buy i am from england, banggood or aliexpress ? let me know your top five cars out of the WLtoys range cheers.
Hi there I prefer Banggood and my favourite is the 144002 but it has got a bit of transmitter delay so I’d prob go for the 124017. I’ve got the new 1/10 th coming so we’ll see what that’s like.. any of them are good though.
I just got my first wl toys rc car. 124017. Blue wheel v2. And mine had a terrible delay. This is called latency. Ive been into rc for 30 years and it just wanted a cheap basher buggy. The issue drove me crazy. I ended up just swapping out to another radio and receiver.
@@noobrccars4392 no sorry I worded that wrong,I meant have you tested any other of those cars or know anyone that has and if so did they have problems as well.. If they did then it's clearly a fault with that model car,if they didn't then you just got a faulty transmitter with yours
@@noobrccars4392 hello mate,I don't know if you can help but I know you're a fan of the wltoys 124017 so I have a question as I've just got one ( and wrote it off lol 😆) I went full pelt into a tree and I've snapped the screw in half that goes in at the front ( by the bumper) and goes lengthwise down the chassis ,through the wishbone and it has a nut at the end. Do you know the part number please? Any help would be GREATLY APPRECIATED as I left the instructions at my girlfriends and she's away for 2 weeks. Thanks a lot mate cheers
Hi there I think you mean this I can only find them from Ali express and I’m not near a pc so can’t send a link but it’s listed as.I think the part number is the 2159 part. Hope it helps. WLtoys 124016 124017 RC car spare parts 144010-2159 screw
So i guess there is no fix other than using another radio...i bet someone else knows how to modify the tx to stop the delay..i am sure its a simple fix for many..maybe change or remove a diod on tx board or something..
Has to be a faulty TX. You've tested every other permutation. Frustrating .... It would be good to get code off others with same issue ..eg is 4 digit code an indication of a problem TX
Are you pushing the binding button on the receiver?. It doesn’t bind like the old one. If you look on the receiver there’s a button on the side facing up if you hold it down with something and then turn the power on the car then turn the transmitter on and it will bind.
Also you can turn the controller on pull on the trigger just a little and hold it while turning the car on this fools the ESC no more delay you have to do it a few times to get the correct trigger pull for perfect running with no delay
Yes you're correct I'm just having delay issue on 124017 v2 with 4 number controller,no it's fix💯😊❤️ lol it's s trick
Is this a permanent fix or you have to do it everytime you turn it on?
Yep that works 😉
I just ended up buying a flysky gt5 and a cheap 3 channel reciever for $12...nomore throttle delay.
I heard that if you do the special wltoys dance before you pull the trigger that it's fixed 🙄. Seriously how could they bring this on the market like this?
just got my 144010 today, very dissapointed with throttle delay. swapped over to 144001 controller and heaps better. blue wheel radio 4 digit number, tried that on my 144001 & yep delay as well. so its definitely the radio. this model wltoys car unbeatable for bashing, have done close to 90 charges on batterys & pushing it really hard big jumps landing on concrete plus abuse from my two grand kids. have only had two replace brushed motor & keep screws and bolts tight. My expensive carpet racing cars wouldn,t take the same abuse. cheers
I bought the one ending in 17 version 2 and it is my first "real" rc car. Arrived yesterday, and I noticed the throttle delay. My controller does infact have only 4 numbers like yours that also have delay. Yeah maybe I have to buy another controller. Thanks for the video! Greetings from Sweden!
Great findings. Mine also had the delay and couldn't stand it. Replaced the transmitter and receiver with a flysky, much better.
I believe they advanced the timing on the v2. Which is what got rid of the cogging issue. Great find on this controller issue, as I have not opened my version 2 yet. I will definitely check that out! Thanks my friend! Really awesome channel! Keep up the great content!👊🏼💯🔥✌🏻😃
The cogging in the V2 is fixed with a different kv on the motor and different number of cos in the pinion gears.
Been waiting for someone to make this video.. what i did is swap the electronics of an old controller to the stock remote.. makes so much difference.. for the 144010
G'day mate, just watched you show about delay on 144010 , got my new 144010 bloody grouse or what, doesn't have any delay at all, stock controller has a sticker number 2266 where you showed us.WL Toys may have fixed that problem,they sure have taken faults in hand, good on you WL Toys if you read this. Keep up the good and interesting work mate thanks Peter
Hopefully, mine's coming in a couple of weeks! Fingers crossed
I got my 144010 v2 yesterday with a four digit number on the tx. Very bad throttle delay is what I get… I will try binding it to my Dx5 tomorrow and see if the delay dissapears
Really good observations / detective work! 🕵️♂️
Thank you 🙏
Don't mind how many videos on the same car, if there's a valuable point to be made. Thanks for sharing.
Awesome video. This helps solve a problem that was a mystery to so many. ⭐⭐⭐⭐⭐
Thanks for the info. 👏👏👏👏👏
Marketing at its finest by wltoys very useful video Ben 👍
man i am so confused if i buy this car Wl 144010 brushless or the Wl habile 124016 brushless what do you advise me wich one is better and durableee !!
Hi, My new brushless 144010 arrived yesterday and there is a delay on the throttle. Its impossible to make corrections over jumps! I have a blue wheel transmitter with the code "0542". Its a cracking little car once you pull the trigger and it starts moving.
Unfortunately I think it affects them all. I think the cheapest option is to get an original transmitter which should solve the problem. Hope your having fun with it though.
There was also a suggestion made, that rebinding the controller might help.
And other yt video claimed its actually an esc fault. They're very cheap components and a person had replaced esc, got delay solved this way. Esc was acting like a working esc
Yeah just got a 144010, it has a delay. It doesn't bother me in the park at all. I did notice it when it tried to test it slowly in the house when I first got it and couldn't drive it slow or smooth.
However I don't really drive this car slow anyway.
Good Technical Service bulletin for WLT.
I think you can use a program card and fix it also. Let me know if this helps
I think my one is cogging because I put my foot in front of it and it was just like juddering I don't know if you can give me some advice does your one do this thanks
Is it possible to bind these.. and the 144001, to another transmitter?
Do you have a link to the 124017 controller? As I don't want to mistakenly buy the 144010 controller...
Some people change the radio in the car, and that also eliminates the delay, even if the controller is the same
Damn. I was just about to buy one these buggies. Guess I need to find a different option 🙁. Thank you for the video.
SO what is the mode button for on the transmitter?
Use the programming card and set acceleration to hard!
The delay is massively annoying. So I bought a Dumbo radio for it. I have both the 124017 v2 and the 140010 (also v2 electrics) and they both have the delay which is why I completely ditched the factory radio system.
I have a 124016 and it has the exact same issue. I’m not new to re, but I am new to the world of rc cars. I let my friend drive the car and the first thing he noticed was the delay
How did you bind the remote. I have an old 144010 remote and would like to try that instead of the delay from the new remote …..How ?
Hi there there’s a button on the receiver if you hold it down and turn the car on then turn the remote on it should bind.
Mine doesn’t. Have tried many times and different combinations: holding button on receiver then turning it on, then turning on the transmitter. Otter way round. Not holding the button. Etc. no luck. Any ideas?
Same here, is there solution for this?
Could you please post the link for the controller here?
The delay of my is very bad and it isn't fun so
Hi there this one will work www.banggood.com/custlink/KD3duGnh4S
or for a bit more you could get the dumbo rc
www.banggood.com/custlink/3vmhzkQrpl
@@noobrccars4392 thank you very much
Thanks for sharing Sir👍
I received my 124017 v2 and I get 4 nomber version,get a delay,I will try it soon on field,
New update from my 124017 v2 with 4 number controller, finally delay issues have been fix(I'm just select BIND button on receiver😹 you guys have issues with this 4 number controller can tray this method, hopefully can help.
hi.. may i know what camera using
J ai une 144010 et j ai aussi le retard mais en fait il correspond a un "défaut" sur la gâchette, il y a 1cm de jeu sur la gâchette vers l avant et l'arrière. La piste du capteur de la gâchette est de mauvaise qualité
Hi and thank you for the review!, what is the runtime of the 144010 with stock battery (1500 mAh) ? Thank for the response!
Hi there with the standard battery it’s ruffly 10. Mins depending how you use it.
Only bad thing about changing to the old transmitter is less range? Good testing.
Just got mine today. Indeed a throttle delay. I just start slow and then it's fine. Ran great. At the end, the throttle stopped but the steering still worked. No bashing, had the speed turned down to get used to the delays. Did something break or was the battery just low? Steering was fast but no throttle.
I would say the battery just got low. Charge it up and give it a go.👍
@@noobrccars4392 Yes, I tried it again today after recharging and it worked just fine. My other wltoys rc runs until it's dead dead. No steering with no throttle issue. I'm just glad it's not broken bc I lack Kevin Talbot level repair skills lol.
Thank you so much. I bound my 144001 controller to the 144010 and it worked, no more lag. And when I bound the 144010 controller to the 144001 there's no lag. Win win
I should receive the 144010 in the next few weeks, fingers crossed, so any improvements I can make are most welcome. Could you dial this delay out with a programme card?
You’ll have loads of fun with it. 😁
I just got my 144010 with the blue remote wheel. Sucks with the delay. Now trying to figure out how to change it, frustrating
Hallo have you try the buttons on the radio the one on the side if you push on that button than his goiing faster when you push the gas on
I have try that abd he goes better.respons greetings
I have the one with the little number and now his faster when push no relay greetings
Now do one for the steering delay on the k989
I believe, the reason why WLTOYS so cheap, because they put cheap tech transmitter and esc. Been played my Tamiya using Futaba transmitter long time ago with my ex company driver who own China RC model (i don't remember the brand name), the one thing that i got notice, is the quality of their transmitter and esc.
I have this issue with my 017, I wonder if it’s to do with firmware.
what is your number code at the base?
@NOOB RC CARS what is a good value for money WLtoys rc car, also where is better to buy i am from england, banggood or aliexpress ? let me know your top five cars out of the WLtoys range cheers.
Hi there I prefer Banggood and my favourite is the 144002 but it has got a bit of transmitter delay so I’d prob go for the 124017. I’ve got the new 1/10 th coming so we’ll see what that’s like.. any of them are good though.
@@noobrccars4392 cheers I got two A959-b coming in hopefully I did not get scammed.
Thank you , very good job, You have one more subscribe 👍
Thank you 🙏
How do you put it in binding mode? With cable?
To put it in bind mode there is a button on the receiver if you hold it down and then turn the power on it will be in bind mode.
I just got my first wl toys rc car. 124017. Blue wheel v2. And mine had a terrible delay. This is called latency. Ive been into rc for 30 years and it just wanted a cheap basher buggy. The issue drove me crazy. I ended up just swapping out to another radio and receiver.
Im thinking of doing same, would a dumborc x6fg work well? Would it reduce delay, give better range and benefit from a gyro? Thanks
@@beamboy07 I think any radio/receiver combo would work. I have heard only good things about the dumbo rc systems. Try it. Good luck
Cars with brushed motors do not cog only ones with non sensored brushless motors cog
Have you tested another transmitter? Then we'll know if you just have a faulty transmitter or if it's a problem indicative to the car
I only have the two other ones that I tested in the video but it seemed ok on those.
@@noobrccars4392 no sorry I worded that wrong,I meant have you tested any other of those cars or know anyone that has and if so did they have problems as well..
If they did then it's clearly a fault with that model car,if they didn't then you just got a faulty transmitter with yours
No one I know but I’ve seen a few other RUclipsrs pick up on it.
@@noobrccars4392 hello mate,I don't know if you can help but I know you're a fan of the wltoys 124017 so I have a question as I've just got one ( and wrote it off lol 😆)
I went full pelt into a tree and I've snapped the screw in half that goes in at the front ( by the bumper) and goes lengthwise down the chassis ,through the wishbone and it has a nut at the end.
Do you know the part number please?
Any help would be GREATLY APPRECIATED as I left the instructions at my girlfriends and she's away for 2 weeks.
Thanks a lot mate cheers
Hi there I think you mean this I can only find them from Ali express and I’m not near a pc so can’t send a link but it’s listed as.I think the part number is the 2159 part. Hope it helps.
WLtoys 124016 124017 RC car spare parts 144010-2159 screw
I got the same problem with my 124017 v2. That delay is really annoying especially when you just drove a brushless car with no delay.
It really is annoying it was massively annoying in this video as I was jumping from one to the other
Ohh thanks I hace bien waiting this video from the last video un which I said you what yo do with the delay
Bit of a defeat from the jaws of victory from WLTOYS. I'm after the 1/12 brushed buggy one but prices have gone mad.
It is indeed and yes the brushed ones prices are crazy nearly as much as a brushless one.
Probably factory defect
Could be, someone told me they have put different components inside? To try and save money I guess.
Just got my 124017 v2 from Banggood CZ. Terrible delay. Transmitter Number is 0923.
The delay is such a shame on an otherwise great car.
So i guess there is no fix other than using another radio...i bet someone else knows how to modify the tx to stop the delay..i am sure its a simple fix for many..maybe change or remove a diod on tx board or something..
great tips
Instead of waffling alote you should of go full speed on a straight place
Hola nos gustaría saber lo que dices en los vídeos a los que somos de otros países , activa la subtítulos por favor en español. Gracias
Hi there i've checked the settings and it is saying subtitles are turned on.
Has to be a faulty TX. You've tested every other permutation. Frustrating .... It would be good to get code off others with same issue ..eg is 4 digit code an indication of a problem TX
It would be good to hear if anyone else has the same digits on there controller to see if there’s a pattern.
I have a four digit number on mine and it lags…
Try calibrating esc to transmitter... dude😉
How?
Read instructions...
THE DELAY IS STILL THERE
I got a 144010 and all I had to do to fix the delay is use the controller from my 124019 no delay
My controller has an 0563 sticker on it. It has the delay. Now that I'm fairly used to the car, the delay is starting to become a bit frustrating.
This happens on my v2 124017 too. Think it must a bad batch of controllers.
what is your number code at the base?
I.saw a short video showing the same case on 124017
Thats the video
I have delay too
It’s such a shame really good car other than that.
@@noobrccars4392 yes that true
@@noobrccars4392 yes that true
Please noob RC I need you to ser this I ha e the wltoys 144001 transmisor and they dont conectes ,I am frustrating
Are you pushing the binding button on the receiver?. It doesn’t bind like the old one. If you look on the receiver there’s a button on the side facing up if you hold it down with something and then turn the power on the car then turn the transmitter on and it will bind.
😂😂😂😂😂😂😂 thanks so mucho I LOVE your Chanel do you make a verte good job
Good vídeo.
Pleaase subtítulos spanish
No puedo compartir en mi grupo de coches rc
Yeah got one, the gas have delay start...