Im done ripping burnouts in my GT500. I want a lowrider so badly. In my 40s now and ive always been in love with hydraulics and wire wheels awesome paint jobs. Wanna hit three wheel coming around the corner to my work. Great video brother and God bless.
I’m right where you are. I’m in my 40’s and I’ve been wanting to get back into lowriding for a while now. I haven’t owned one since I was in my late twenties..Good luck brother!
Go for it. I sold my built Z06 and bought my 63 Impala right before I turned 30. Best decision I made. 3 pumps 8 batteries I been beating her up it’s full frame time now
I'm 50. I've stayed in a Lowrider since my twenties. I used to build them for ppl. I live in the country now where no other Lowriders. Mine stays in the garage a lot.. But I got it tho
finally a good video, also, im a young guy im only 19 yrs old, but i like lowriders a lot but im going to be fully honest, i have absolutely NO CLUE where to even go to get all these parts installed, ive always seen people have them but how tf or where tf do they go to, a mechanic shop?? (Sorry if i sound dumb but i genuinly dont know sht and i only recently bought a car so i have no idea how anything works)
No worries. This is how you start. Ask ask ask and do research and a lot of it. You'll get there. Find where they have shows if you can. I don't have one either but want one. I have some knowledge on cars but only very limited on hydraulics and that stuff. You'll get there. ❤
It kinda depends where your located , but do your research you might have to travel a bit but look for pwople with experience and knowledge! Instagram is a good resource!
Remember to go with your heart and add stuff you like . There is no right or wrong way to build one . We all have different budgets and likes . The best thing is to enjoy it and make memories . Lowridering is in the heart . 👊🏼
Hell yeah ima put your link on my video so people can see this , Lowriding is missing stuff like this ! 20k to build a Lowrider what I been seeing lately fram reinforcing, paint interior chrome yeah money 💰 to play around. Buts it’s THE FUN OF IT
What up! Just came across this video ! Love the content, and I can't wait to dig into your past videos... at 41 years old iv been in love with lowriders since I was old enough to turn pages in a lowrider magazine. Over time I came super close so many times with making my dream come true..close to the poiint i had 13x7 wires and a reds hydro ump kit to install but never got the chance .. I had a 76 seville, 79 seville, and my favorite.. 81 cutlass supreme... all in mint condition, but something always came up, and I had to let m go... I'm currently looking to get back into it because I gotta achieve my goal b4 ya boi checks out, lol. this video sets a sum of what number I can look forward 2 when getting this ball rolling again. Thanks for your content, and I can't wait to watch your other videos
@@Lowridersdoggs yeah eazy.... Show cars are on a complete different level right now. I doubt there's a show lowrider out there for less than 100k.... And that's super conservative especially depending on where you live too.
I like your videos. I'm just coming into the lowrider scene. Do you have or could you create a video of every hydraulic component needed to build. I'm lost when it comes to Kits, Gears, Cylinder & cup size. Front coils & power balls? I'm totally lost.. Thanks in advanced
AHHH!!! Bought my first Cadillac, a white 94 DeVille. She is mint. Came with extra rims too!!! I sooooo want to get into this! Im a single mom with no job atm but im glad we found this gem of a car!!
I didn't see you mention anything and reinforced frame? If you plan on it being a working lowrider that is a must. To many people forget that and after a few hops you bust the frame. That alone is the most expensive part.
i have a regal i bought already cut with three pumps. i just have it primed . all i want it to do is three wheel and hop a little bit and a partial reinfocement. how much would that run
For the cost of the Buick. Could of went with a clean ass TC. That would have cut your interior cost, and some of your beat cost. Set Chrome D's and Juice with a touch of Pinstriping ...Total $15k
A boss I have a question and need your opinion so I always loved lowriders I always had lowrider bikes and I had a 93 Lincoln towncar 78 Cutlass and a 82 Buick regal but never with hydraulic and since I was deep in gangs and drugs never got the chance to really do anything with them now that I'm a lil older with family I really want a lowrider to cruise with my wife and boys don't want a show car just something nice to cruise and three wheel and have fun i found a grandma car witch is a 83 Cadillac coupe DeVille super clean all it would need is the hydraulic old gentleman is asking 6,000$ witch I think it's a good deal but i also think of a newer 2003 and up Lincoln town car would be good If i look i can get a clean one with low miles for around 10,000$ and all it would need would be the hydraulic system as well witch one do you suggest is best for my dollar now and for the long run as well? And I do know a good set up would cast me around 7,000$ it's self plus 1,500$ for rims
Myself I would go with the Cadillac. The town car would be nice but something about those Cadillacs that’s more of a classic lowrider to me. Plus I think that’s a great deal. Thanks for the comment I appreciate it .
I'm in north tampa customs Learning how to do hydraulics and air suspension suicide doors, Lamborghini doors and so on how a help er should get paid and got job corps knowledge
@@anthonycordova74 in Montana their relatively cheap tuners anyway not to many people search them out and you can get engines for 200 or less and Mazda's for around 1000 and Lexus sc300 for around 800
Anthony i want your opinion redarding a 2008 cadillac CTS Sedan. I want to put airbags on my car or hydro's but was told since it does''nt have a frame. What do you think? Is it too difficult to be done on the Cadi? Love on your videos though Homie.
Thanks for tuning in. If you’re building a lowrider I would go with hydraulics but you could honestly do either. You would have to reinforce the strut towers if you’re going with hydraulics or at least I would.
@@anthonycordova74 Thanks for the respose Anthony. Even though there is no frame it is still possible to do hydros just reinforse the strut towers? I would really love to to go withnhydros just concerned with safety.
@@mrmusic9892 I would definitely do some more research I know there is more you could probably reinforce to make it stronger. I have never had to lift a unibody car but I know it can be done. There was thousands of euro lowriders like Hondas and Toyotas done and they’re all unibody chassis.
@@anthonycordova74 Anthony, I apreciate your input thank you. Let me tell you something from the heart. Everyone of your videos are authentic, no gimmic or "like me and subscribe" to them. There are very few people who upload content and let the content speak for itself. Your work is amazing and the talent you posess is priceless. At 52 born and raised in Los Angeles I only watch those who are true to themselves and express it that way. Do you have a donation or patreon site set up? Let me know. If you don't, i would like to encourage you to do so. The time it takes to record a video, sit and edit it in real time as well as the free information you give deserves conpensation. Once again thank you!
@@anthonycordova74 Fa sho Especially if you all the people that do the jobs. Paint 500 and up Interior 1k and up Suspension/Switches 4K and up Engine/Transmission 2k and up Car - 3k and up Body work 1k and up Add it up. My list comes to about 15k That’s cheaper than 23k
Me too bro me too. I built my first car for cheap in the 90s. I couldn’t even buy that car these days for what I paid for the entire build back then . SMH!
Me personally I wouldn't never put that much into a G-body to start off wit to each its own maybe a elco ? bac in the day we could get a grandma clean G - body anywhere from a $1000-1500 in the 90s etc but now a days these prices is crazy real talk but whatever somebody enjoys just do a little more diggin you be suprised on how much you can save like they say sometimes it aint what you know its who you know but it's cool you given some game to some who just trying to get they feet wet real talk
Randomly got the urge to build a beauty, with almost 0 knowledge on any of this… Came across this video in hopes to learn of the startup, thanks! Almost 1k follows too 💪🏼
Got entertainment but no value. This hypothetical build was built around your confirmation biases and preferences. You can absolutely find a cheaper Regal. You can absolutely spend less on interior. You can absolutely get a set of China's for with tires for $1,200. Who is paying $1,100 for sounds. WTH?? And hydros, no way fully installed by a third party with additional suspension components would cost $5300. That's more in line with an air ride suspension. Depending on setup. Your opinion of Lowriding on strictly hydraulics is trash. The real kicker here is you imagining paying $23k and still ending up with a boring copy/paste G_body. Take my view regardless. No like or sub.
even if lay and play i would think you need some minimal reinforcements done at least the rear end and back arches etc. especially if planning on three wheeling. but yeah i see where you're coming from. @@anthonycordova74
@@anthonycordova74 if you don’t go 5.20’s then 155/80/13. I had them on my Lincoln Continental Mark V with 8 Batteries in the back! So any car can take them. I was all over OC, Los and IE in them.
To me it's strange when people put in all that money for the paint, Interior, hydraulics, sound system but then you pop the hood and the engine and engine bay looks like absolute shit lol
$23,500 for a budget build smh. That’s why mfers be jacking to afford this stuff. Or stealing a budget built one lol. You can buy a funny car sans engine for that.
I love it. The basics of building a solid Lowrider. Detail work is a never ending job.
Thanks for tuning in! Yeah you’re right it never ends.
Im done ripping burnouts in my GT500. I want a lowrider so badly. In my 40s now and ive always been in love with hydraulics and wire wheels awesome paint jobs. Wanna hit three wheel coming around the corner to my work. Great video brother and God bless.
Go for it! Thanks for the comment.
I’m right where you are. I’m in my 40’s and I’ve been wanting to get back into lowriding for a while now. I haven’t owned one since I was in my late twenties..Good luck brother!
I got one for sale if anyone is interested lmk
Go for it. I sold my built Z06 and bought my 63 Impala right before I turned 30. Best decision I made. 3 pumps 8 batteries I been beating her up it’s full frame time now
I'm 50. I've stayed in a Lowrider since my twenties. I used to build them for ppl. I live in the country now where no other Lowriders. Mine stays in the garage a lot.. But I got it tho
finally a good video, also, im a young guy im only 19 yrs old, but i like lowriders a lot but im going to be fully honest, i have absolutely NO CLUE where to even go to get all these parts installed, ive always seen people have them but how tf or where tf do they go to, a mechanic shop?? (Sorry if i sound dumb but i genuinly dont know sht and i only recently bought a car so i have no idea how anything works)
No worries. This is how you start. Ask ask ask and do research and a lot of it. You'll get there. Find where they have shows if you can. I don't have one either but want one. I have some knowledge on cars but only very limited on hydraulics and that stuff. You'll get there. ❤
It kinda depends where your located , but do your research you might have to travel a bit but look for pwople with experience and knowledge! Instagram is a good resource!
Cool, you got the car. You are 30% there. What did you manage to get? And if you don't mind me asking, what kind of work do you do?
I’m working on an 86 Monte Carlo so I’m finding this video helpful.
Remember to go with your heart and add stuff you like . There is no right or wrong way to build one . We all have different budgets and likes . The best thing is to enjoy it and make memories . Lowridering is in the heart . 👊🏼
Thank you! I appreciate the support and I’m glad I could help!
I remember when you could buy a car like that in the mid 90’s for $800.
Yeah I got my first car in 95 the good ol days! Lol
Fagettaboutit!!!!! Never again!
Hell yeah ima put your link on my video so people can see this , Lowriding is missing stuff like this ! 20k to build a Lowrider what I been seeing lately fram reinforcing, paint interior chrome yeah money 💰 to play around. Buts it’s THE FUN OF IT
That’s what’s up! I appreciate the support!
What up! Just came across this video ! Love the content, and I can't wait to dig into your past videos... at 41 years old iv been in love with lowriders since I was old enough to turn pages in a lowrider magazine. Over time I came super close so many times with making my dream come true..close to the poiint i had 13x7 wires and a reds hydro ump kit to install but never got the chance .. I had a 76 seville, 79 seville, and my favorite.. 81 cutlass supreme... all in mint condition, but something always came up, and I had to let m go... I'm currently looking to get back into it because I gotta achieve my goal b4 ya boi checks out, lol. this video sets a sum of what number I can look forward 2 when getting this ball rolling again. Thanks for your content, and I can't wait to watch your other videos
Thanks bro! Keep at it, you got this!
i just want me a 63 or 68 candy apple red impala on some daytons, no need for switches, just air cruising LOW 🔥
That’s a good plan! ✌🏼
You might as well buy it built for 23k full show
You ain’t finding full show ready for 23k
Good luck 😂😂😂😂
@@gladememmott3001 lol right! Just a show level paint job alone, looking at around 12k
@@Lowridersdoggs yeah eazy.... Show cars are on a complete different level right now. I doubt there's a show lowrider out there for less than 100k.... And that's super conservative especially depending on where you live too.
You can buy street car for that for sure!
You need to add what you think the rebuild would sell for that puts all the hard work in perspective my man
Ok thanks for your input
I like your videos. I'm just coming into the lowrider scene. Do you have or could you create a video of every hydraulic component needed to build. I'm lost when it comes to Kits, Gears, Cylinder & cup size. Front coils & power balls? I'm totally lost.. Thanks in advanced
Thanks for the comment! I can make that happen!
AHHH!!! Bought my first Cadillac, a white 94 DeVille. She is mint. Came with extra rims too!!! I sooooo want to get into this! Im a single mom with no job atm but im glad we found this gem of a car!!
Nice! Little by little! Good luck on the job search!
U can save more money, if u weld,do mechanic work, interior,body work & paint!!! 💵💰
That’s is 💯 percent correct! I say do it all yourself and save money too!
That’s how I’m building mine one thing at a time
Great video homie
Appreciate it. Thanks for checking it out!
Hey good lookin out on the pricing run down. I've been planning on building a Lowrider but haven't done the math.
Good rough estimate.
Glad to help. Thanks for turning in! It
I have a 1983 Cadillac coupe deville.
That’s what’s up. Those are sick lowriders!
If my tapes and my CDs just don't sell, bet my caddy will!
-afroman
back in 1996 i bought my super clean oldsmobile
cutlass salon 5.0 t-top for $3000!
I’m a girl and I love lowriders. I want to start on a project but I don’t know crap about cars. Where do I start? 😩
Find a network of car people, youtube tutorials, buy a done car it will be cheaper in the long run.
Hey bud, how much to restore that 58 Impala
A lot more than 24k 😂
I’m getting a 88 S10 Blazer can’t wait too build it up
Nice, always liked those blazer lowriders!
I didn't see you mention anything and reinforced frame? If you plan on it being a working lowrider that is a must. To many people forget that and after a few hops you bust the frame. That alone is the most expensive part.
This was for a budget lay and play set up.
Thank you for this. I wanted to build a LR but had no one to talk to about it. I'm from Philly but live in Texas.
Glad I could help. I plan on doing more lowrider content soon as well
I ended up getting that cadillac you show in the video. The one in Santa Rosa
That’s what’s up! Good luck on the build!
What about wrapping the frame. I thought that was important??
If your gonna be hoping a lot i would say thats a great idea. this was just for lay and play.
Im just looking up lowriders for the suspension for my 4x4....
Sounds good man.
i have a regal i bought already cut with three pumps. i just have it primed . all i want it to do is three wheel and hop a little bit and a partial reinfocement. how much would that run
All depends on where you take it or how much you can do yourself. I’m sure it would be over a couple thousand.
For the cost of the Buick. Could of went with a clean ass TC. That would have cut your interior cost, and some of your beat cost. Set Chrome D's and Juice with a touch of Pinstriping ...Total $15k
I want to do a more classic lowrider, but your right you could do a Town Car and cut out interior costs!
Yes sir lol I jus got my TC ain't gotta do too much interior work I jus wanna make that bitch bounce and 3 wheel lol
I build a Cutlass 2 pumps and 6battiers I measured npre fix
Bought a 79 regal about a year ago still haven’t built it but when I do it’s gonna be dope
Nice. Those are my favorite regals! Keep us updated!
I'm still looking.. thank you.
Good luck!👍
What about the ford crown victoria
Maybe next time! Thanks for commenting.
What website do your recommend purchasing the hydraulic system from?
Hoppos , Black Magic hydraulics all good companies look for someone thats been around for a while and has good reviews!
dam I never noticed how expensive it is to take it shop just been lucky to build them myself alot of youtube
Hell yeah. It’s expensive as hell. If you can do it yourself you can save!
what a straight dawg man i love it
Thanks for the comment appreciate it!
Great vid but I think u should've have mentioned frame reinforcement
Yeah, maybe in another video! This was a budget build scenario!
That regal is the second gen of Regal not first , its the with that body style but not gen
I realized that after I filmed it . I meant that body style. Thanks for confirming it. Lol
I like the regal
Thanks for the comment!
Hell yeah!
A boss I have a question and need your opinion so I always loved lowriders I always had lowrider bikes and I had a 93 Lincoln towncar 78 Cutlass and a 82 Buick regal but never with hydraulic and since I was deep in gangs and drugs never got the chance to really do anything with them now that I'm a lil older with family I really want a lowrider to cruise with my wife and boys don't want a show car just something nice to cruise and three wheel and have fun i found a grandma car witch is a 83 Cadillac coupe DeVille super clean all it would need is the hydraulic old gentleman is asking 6,000$ witch I think it's a good deal but i also think of a newer 2003 and up Lincoln town car would be good If i look i can get a clean one with low miles for around 10,000$ and all it would need would be the hydraulic system as well witch one do you suggest is best for my dollar now and for the long run as well? And I do know a good set up would cast me around 7,000$ it's self plus 1,500$ for rims
Myself I would go with the Cadillac. The town car would be nice but something about those Cadillacs that’s more of a classic lowrider to me. Plus I think that’s a great deal. Thanks for the comment I appreciate it .
No problem and thank you
You can’t be hitting switches on a 2003+ TC, they have an aluminum sub frame and fwd offset.
I'm in north tampa customs Learning how to do hydraulics and air suspension suicide doors, Lamborghini doors and so on how a help er should get paid and got job corps knowledge
There just aint no shops near me that can install hydrualics :(
Do them yourself! I did my second set up by myself, learned by watching and problem solving!
So I suppose I cant do a 63 drop top for this much?!!
You could do anything you put your mind to. Except that ! Lol
This reminds me why I never built a lowrider expensive and I stuck with just a muscle car or tuner
Muscle cars and tuners are expensive too!
@@anthonycordova74 in Montana their relatively cheap tuners anyway not to many people search them out and you can get engines for 200 or less and Mazda's for around 1000 and Lexus sc300 for around 800
@@anthonycordova74 i build a Honda on 5 k not 500k haha
Is that a '58 Chevy on the lift?
Yes it is. It’s a featured build on my channel, if you want to see more of it.
9:07 😂😂😂 one day ✨🙏🏾✨
Thanks I appreciate it!
Anthony i want your opinion redarding a 2008 cadillac CTS Sedan. I want to put airbags on my car or hydro's but was told since it does''nt have a frame. What do you think? Is it too difficult to be done on the Cadi? Love on your videos though Homie.
Thanks for tuning in. If you’re building a lowrider I would go with hydraulics but you could honestly do either. You would have to reinforce the strut towers if you’re going with hydraulics or at least I would.
@@anthonycordova74 Thanks for the respose Anthony. Even though there is no frame it is still possible to do hydros just reinforse the strut towers? I would really love to to go withnhydros just concerned with safety.
@@mrmusic9892 I would definitely do some more research I know there is more you could probably reinforce to make it stronger. I have never had to lift a unibody car but I know it can be done. There was thousands of euro lowriders like Hondas and Toyotas done and they’re all unibody chassis.
@@anthonycordova74 Anthony, I apreciate your input thank you. Let me tell you something from the heart. Everyone of your videos are authentic, no gimmic or "like me and subscribe" to them. There are very few people who upload content and let the content speak for itself. Your work is amazing and the talent you posess is priceless. At 52 born and raised in Los Angeles I only watch those who are true to themselves and express it that way. Do you have a donation or patreon site set up? Let me know. If you don't, i would like to encourage you to do so. The time it takes to record a video, sit and edit it in real time as well as the free information you give deserves conpensation. Once again thank you!
@@anthonycordova74 Anthony i messaged you something from the heart 2 days ago. Answer it and let me know where i can donate.
What's up with the 58 I'm building one myself how's it going for you.
It’s coming along. It’s a huge undertaking so it’s taking some time but I’m on it everyday.
$7100 for that, yeah, prices are definitely high these days. That used to be a $2k car several years ago.
Yeah times have definitely changed.
@@anthonycordova74 Unfortunately
Cool vid, good info, & funny. 👍
Glad you enjoyed it, thanks for the feedback!
Gonna spend 90k on 62impala ss convert
Easy to do! 💯
I seen full blown built low riders for cheaper than 23k
On multiple occasions In Seattle Washington.
I’m sure you could do it for cheaper if you’re resourceful.
@@anthonycordova74
Fa sho
Especially if you all the people that do the jobs.
Paint 500 and up
Interior 1k and up
Suspension/Switches 4K and up
Engine/Transmission 2k and up
Car - 3k and up
Body work 1k and up
Add it up.
My list comes to about 15k
That’s cheaper than 23k
Smh remember when we could go grab a car a kit some wheels and some metal slap it together grab some batteries and hit the streets for 5k.
Me too bro me too. I built my first car for cheap in the 90s. I couldn’t even buy that car these days for what I paid for the entire build back then . SMH!
@anthonycordova74 I still have my lowrider I built in the 90's
@@kdsboosted4954 nice, unfortunately I sold mine. It was all Kandy painted when I sold it! 😑
Me personally I wouldn't never put that much into a G-body to start off wit to each its own maybe a elco ? bac in the day we could get a grandma clean G - body anywhere from a $1000-1500 in the 90s etc but now a days these prices is crazy real talk but whatever somebody enjoys just do a little more diggin you be suprised on how much you can save like they say sometimes it aint what you know its who you know but it's cool you given some game to some who just trying to get they feet wet real talk
Im not a huge G body fan but it made sense for the video , thanks for the comment!
Great vid!!!
Thank you!
thanks for the video
You're welcome. Thanks for the comment.
If this is the going rates I need to open a shop,this is crazy high...
Yeah prices are crazy these days !
The homies car on the thumbnail 🔥💯
That’s what’s up. Thanks for the comment ✌🏼
What currency is it?
Dollars! Thanks for the comment!
@@anthonycordova74 like aud or USD I meant sorry
@@FroggyJumpyLegsUSD bro
Randomly got the urge to build a beauty, with almost 0 knowledge on any of this… Came across this video in hopes to learn of the startup, thanks! Almost 1k follows too 💪🏼
Glad I could help! Yes sir almost!
Car ?
Hydros?
Knock offs ?
Lotion/chrome?
Installation/reinforcement?
Interior?
Engine?
Not a cheap sport!
Paint? Lol
Batteries? Lol
Sounds if any or if room enough? Lol
Charger for batteries? Lol
Club plaque? Lol
Where u located
Northern California
$2600 for paint?? More like $4-8k for street quality
Just for Pinstriping.
It cost more then that for hydros alone
This was meant for a budget lay and play set up.
Hell yeah brother
Right on brother!
Great video
Thanks! I appreciate it!
Facts 💯💪🏾
Thanks for the comment.
Got entertainment but no value. This hypothetical build was built around your confirmation biases and preferences. You can absolutely find a cheaper Regal. You can absolutely spend less on interior. You can absolutely get a set of China's for with tires for $1,200. Who is paying $1,100 for sounds. WTH?? And hydros, no way fully installed by a third party with additional suspension components would cost $5300. That's more in line with an air ride suspension. Depending on setup. Your opinion of Lowriding on strictly hydraulics is trash.
The real kicker here is you imagining paying $23k and still ending up with a boring copy/paste G_body. Take my view regardless. No like or sub.
At least you got some entertainment! Every body knows airbags are for mini trucks! Lol
What do you think of baby Lincolns
Subscribed
Thank you!
Dude!! Idk what you doin, but you aint no good shopper bro! Straight up!!
I thought I did pretty good. 😂
@anthonycordova74 maybe so..i might not know them prices that good out there ,lol
08:59
😑🤣
@@anthonycordova74😁😁
hi dude, im from indonesia (asia) 🙏
@@TAM_TAM57 thanks for tuning in.
im only 15 but I already want a lowrider so badd
Thats whats up, lowriding is addicting!
really good.
Thanks! I appreciate the feedback
Im cool I will just throw some lifts on ot with some 24 inch rims😂
Nice ❤
Appreciate it!! Yeah that year is a good one!
I want to import this car to India but idk how…!!!
Lowriders in India!
I’ve always wanted a low rider and now I’m 46 and still wanting one😂😢
The feeling never goes away!
IT COST TO BE THE BOSS AND YOU GOTTA PAY TO PLAY. FASHO. THIS SHIT AINT CHEAP.....
Fasho and that’s on the cheap side. Thanks for your input.
@@anthonycordova74 yeah. You didn’t mention reinforcement work which is also a pretty penny. Even if not full frame.
@@thegoodlifemia yup that’s just lay and play no reinforcements!
even if lay and play i would think you need some minimal reinforcements done at least the rear end and back arches etc. especially if planning on three wheeling. but yeah i see where you're coming from. @@anthonycordova74
I'd say definitely ½ half to a ⅓ third to a ¼ quarter of his price...
Maybe? If you can salvage up some used parts and do all the work?
100k minimum.
For full show, for sure!
20 and UP🎉
Yes sir!
Tires are too big.
What size would you recommend?
@@anthonycordova74 if you don’t go 5.20’s then 155/80/13. I had them on my Lincoln Continental Mark V with 8 Batteries in the back! So any car can take them. I was all over OC, Los and IE in them.
Right on thanks for the info! I’ll check it out.
To me it's strange when people put in all that money for the paint, Interior, hydraulics, sound system but then you pop the hood and the engine and engine bay looks like absolute shit lol
I’ll do a video on a full build soon! Lol
Is that a 58 Impala on the rotisserie?
Yes it is.
55k
That’s minimum full build build for everything I mentioned, paint and more!
I wish I was rich
Give away a rolls royce
She’s having a baby right now!
too much small talk. keep tobthe topic.
Sounds good!
So much cheaper in the states
Yeah depending on where you live. Where are you located?
Australia my man
5,000 for hydraulics 😂 your shit will be smokin and catching on fire
Basic setup and some elbow grease could get it done for that if you know what your doing.
Find you a fixer upper
Interesante 😎👊👀
Gracias ✌🏼
More then it would ever be worth. 😂
4 doors sux brah
Lol! You gotta start somewhere Brah!
@@anthonycordova74
yeah but only 4 door worth having is early to mid 90’s big body Caddy/Buick brah
🙏🏼
✌🏼
This fool is hilarious 🤣
Thanks!
$23,500 for a budget build smh. That’s why mfers be jacking to afford this stuff. Or stealing a budget built one lol. You can buy a funny car sans engine for that.
Everything has gone up for sure. It’s pretty insane.
Bullshit
Horse shit
I build a lowrider with an air suspension just to piss off the purists
Yeah Ive been seeing a lot of airbag setups lately.
too much and still
not done 😂
It cost to floss for sure!
Why cops take your sh_t? Drug dealing brah?
No license Brah!
@@anthonycordova74
hardcore brah
😂😂😂
🤣👍