No, you’re absolutely right. I’ve been a tech since the days of the original Xbox and basically have all revisions down to what capacitors they used in each one memorized. This is 100% a launch model. Another fun fact about launch models, they all had Toshiba Samsung drives. If you ever pop open a Xenon with that trim and you find a hitachi drive, the trim or the drive was switched. 2006 is when they got Hitachi drives. Oddly I see yours has a BenQ VAD6038 so that tells me it’s a warranty console. Also, that would contribute as to why it’s still running. When Microsoft would repair drives on launch consoles that DIDN’T have the RROD, they reinforced both the CPU and GPU edges with epoxy.
Epoxy helped with preventing the RROD? Could you perhaps elaborate on that part, I always thought of it as the result of an internal issue within the CPU
@@bravefastrabbit770 it honestly didn’t, but Microsoft still put it on the outer edges of the CPU and GPU. What really fixed the RROD was when they revised to the Jasper boards that ran cooler. Going from 90nm chips to 60nm made the biggest difference.
i had one working that has this configuration... xenon+benq, in the back i could read 'service date' 2009-01-14 so makes sense that its a warranty console, i was wondering why this xenon in 2009!
@@sie7e yep! I’ve currently got a shelf full of phat 360’s and one of them is a zephyr with a 2011 service date. Popped it open and found it’s got a lite on drive. Also ended up with a completely untouched PAL Xenon as well. Not sure what I wanna do with that one.
Badass. I've got a Japanese launch 360 looking just like this one, with a manufacture date of November 11th 2005. I got it for $10 red ringed, but managed to get it running. It's actually in really clean condition, all things considered! It has the 2010 Kinect dashboard, which it would've been cool to have NXE or Blades but I'll take it. It seems that I have to reflow it again after maybe 5 or 6 times of turning it on which blows. At least I got to play through the entirety of route A in NieR Gestalt on it! I haven't tested it since December when it was working fine. Curious if it'll turn on next time lol
Тоже купил за 10$ с красным кольцом версию 2006 но я догадывался что эта модель xbox 360 не стартует без av и хозяину просто не удалось его проверить. Поэтому мне достался полностью рабочий xbox 360 даже на lt 3.0
Awesome! I just booted a factory sealed, brand new xenon 360 yesterday, video is on my channel of it running if you want to see it. Mine has a date of manufacture April 2006. Mine is so rare being brand new I took it apart before I booted it, had 14 caps replaced, put the upgraded heat sinks on it from later models that had a heat pipe for the gpu, and upgraded the thermal paste to the best I could find, and its working like a champ :)
Owner of a 2005 Xbox 360 launch model here, one that was actually refurbished by Gamestop at some point and had terrible work done to it. (Bolt mod to the heatsink + thermal paste replaced without removing the stock paste) Removed the bolt mod and replaced it with its regular X-clamps, also did a proper thermal paste replacement on it, aswell replacing the GPU heatsink with a newer one with the heatpipe on it, in the end it works fine and gets a occasional gaming session on it tough its mostly a collection system. (also owner of a 2006 xenon running blades and a 2008 Falcon wich is my go 2 system when it comes to playing xbox 360 games on original hardware)
16:30 This disc drawer problem is common when using the console but it is much simpler to solve than beating your video game. Changing the reader's rubber belt solves this problem, and it costs pennies.
Got this in my recommended after just turning on my falcon 360 and finding the ol RROD. It was a birthday present from my uncle, it and a huge box of games. Literally just got it last week, and the power cord a 5 days before writing this comment. I got to play it twice, and it was fucking awesome. Went to turn it on, realized it wasn’t booting, looked down and sure enough, those 3 lights were red and flashing. Such a shame
My Xbox 360 was made in April 2006, and still works, and is in almost 100% perfect condition. It's a premium model too with the original 20GB HDD. It was never serviced, or opened. I did open it up to replace the thermal paste which was concrete.
I have all motherboard revisions except Corona & Winchester but I love Xenon’s. Mainly for the rare early Hitachis & Samsung drives, and the Chrome HDD & side grilles with the OG Chrome Trim controller
I have 2 launch consoles in my collection. 1 is a Japanese region with mfr: 11-03-2005 on dashboard 1888, its never been taken apart. It came with full auto, one of the launch titles, and the original controller. Even has a demo of hexic HD, they most likely touched it a few times and never played it again. The 2nd one is a 10-05-2005 xenon on dashboard 2255.The case is original, but it must've had a bad drive as it has a 2006 series drive and its missing the original hard drive, but it did come with the original controller. It works good though, i put fresh thermal paste. Unfortunately the holes for the case screws(long screws) broke off, these cases are deteriorating with time.
Awesome console man. I wish I had one of these, especially The Xbox 360 Launch Team Console (Lime Green, Gray and White) with the controller. So bad ass man.
nice, i have a december 2005 manufacture date u.s model myself. works fine & has metro ui, but it runs abnormally loud. edit: never red ringed before :)
I absolutely hated Xenon after my launch 360 was sent in its cardboard coffin for "repairs" because DVD's wouldnt load, games worked fine but when I got it back all they seemed to have done is reset the system to factory settings and DVD's still would load. So admitted defeat and left it as i played games fine but after just 4 months or so I got "the ring" after looking at all the horror stories online about the xenons I just threw the f'ing thing in the bin and bought a JTAG'ed Jasper (NOT RGH) and here I am years later still lov'in it... recently discovered a huge library of indie games online im trying out. The $1 Zombie Game anyone? lol
The thing is that it’s only a true survivor IF the console still has the original silver warranty sticker intact. Lots of Xenons got new GPUs and resold by MS and you’ll know this if it has a square white sticker behind the faceplate. I’ve found many Xenons with newer GPU chips. It’s possible that this console had red ring before but put a better GPU in it lol
@@arpwcos2011 what does it matter I meant the specific system in the video not the actual release date of the console as a whole. I'm well aware it was released November 22nd 2005 but a few systems have manufacture dates before that
Sweet to see those still working, I got lucky, I got, well not a launch model but is a Xenon from 2006, off ebay in mint condition marked as untested, turns out is working as expected given is good condition, it also has the NXE dashboard
The painted silver trim on the 360 lasted from November of 2005 to around February of 2006 give or take. I have a launch edition system from 2005. It was rebuilt by Microsoft in 2009, so it has a new non-defective GPU and newer model disk drive. Unfortunately I can't tell what its manufacture date is because the original sticker was removed and replaced with a service sticker, however the serial number still identifies it as a 2005 model.
I agree with you on the tv's. I hate samsungs. I have an LG thin Q and a SONY Bravia XR and I will never go back to non OLED yes they're more expensive but I'm sure everyone will agree that OLED is better than QLED any day I mean SONY uses LG panels for God sakes because they're good! Nothing beats pixels that are turned off for blacks rather than pixels trying to make the color black. If you have the money, go LG or SONY.
Put double taped soda caps underneath this model so the vents at the bottom can breathe. It's how I kept mine alive. However, I recently bought a slim because this model doesn't do hdmi and while it's a cool model and my first 360 it's annoying how it doesn't support hdmi. It also sounds loud like a vacum cleaner.
so i do have a 2005 360, but its got gray sides instead of dark silver. it still works great, but it will have the red ring of death when you first turn it on, so after about five minutes of it flashing, turn it off then back on again and itll work! still on the blades dashboard too. :D
I agree that those are launch models, However. I have seen dark silver 2008 HDMI serviced/refushbished unites that were opened directly from microsoft! :) Extremely rare though.
release date for uk was 2nd Dec 2005 mine is dated 19th December 2005 as i say silver seal still in place, id say mine is a true survivor, i have another early one but a bit later, i also have a release day 360S in gloss black and a release day xbox one with box and day one 2013 controller.
"Launch model" refers to the first batch of consoles released on launch day, Zeypher PSU don't exist. They're Xenon PSU (Really doesn't matter, just sounds dumb.).
@@tcscomment There are revised Xenon GPUs like the Elpis. You can retro fit a Jasper or Kronos GPU to a Xenon and Zephyr. But the board requires some work in order to make it work. Look up Josh Davidson Jasper retrofit
No, you’re absolutely right. I’ve been a tech since the days of the original Xbox and basically have all revisions down to what capacitors they used in each one memorized. This is 100% a launch model. Another fun fact about launch models, they all had Toshiba Samsung drives. If you ever pop open a Xenon with that trim and you find a hitachi drive, the trim or the drive was switched. 2006 is when they got Hitachi drives. Oddly I see yours has a BenQ VAD6038 so that tells me it’s a warranty console.
Also, that would contribute as to why it’s still running. When Microsoft would repair drives on launch consoles that DIDN’T have the RROD, they reinforced both the CPU and GPU edges with epoxy.
Epoxy helped with preventing the RROD? Could you perhaps elaborate on that part, I always thought of it as the result of an internal issue within the CPU
@@bravefastrabbit770 it honestly didn’t, but Microsoft still put it on the outer edges of the CPU and GPU. What really fixed the RROD was when they revised to the Jasper boards that ran cooler. Going from 90nm chips to 60nm made the biggest difference.
i had one working that has this configuration... xenon+benq, in the back i could read 'service date' 2009-01-14 so makes sense that its a warranty console, i was wondering why this xenon in 2009!
@@sie7e yep! I’ve currently got a shelf full of phat 360’s and one of them is a zephyr with a 2011 service date. Popped it open and found it’s got a lite on drive. Also ended up with a completely untouched PAL Xenon as well. Not sure what I wanna do with that one.
@@50ne50 What really fixed the RRoD was revised chip underfill
I found a launch model today was red ringed unopened clean af inside fixed it up powerd it on too see blades absolutely love it
Badass. I've got a Japanese launch 360 looking just like this one, with a manufacture date of November 11th 2005. I got it for $10 red ringed, but managed to get it running. It's actually in really clean condition, all things considered! It has the 2010 Kinect dashboard, which it would've been cool to have NXE or Blades but I'll take it. It seems that I have to reflow it again after maybe 5 or 6 times of turning it on which blows. At least I got to play through the entirety of route A in NieR Gestalt on it! I haven't tested it since December when it was working fine. Curious if it'll turn on next time lol
Тоже купил за 10$ с красным кольцом версию 2006 но я догадывался что эта модель xbox 360 не стартует без av и хозяину просто не удалось его проверить. Поэтому мне достался полностью рабочий xbox 360 даже на lt 3.0
Awesome! I just booted a factory sealed, brand new xenon 360 yesterday, video is on my channel of it running if you want to see it. Mine has a date of manufacture April 2006. Mine is so rare being brand new I took it apart before I booted it, had 14 caps replaced, put the upgraded heat sinks on it from later models that had a heat pipe for the gpu, and upgraded the thermal paste to the best I could find, and its working like a champ :)
Crazy to see a 2005 running GTA 4. A lot of new PCs struggle to run that game 😂
because GTA 4 on PC has awful optimization compared to the console versions
Yes 100%@@EvoStarIX
@@EvoStarIXGTA 4 PC runs perfect on my computer max settings, yes its the steam version.
@@R3TR0--93i recommend using radio downgrade or the downgrader for mod support
It was optimized for console
I really enjoyed this video brother. I had fun man. I love anything Xbox!
My Xenon has Silver dark and the release date was 10 March 2006.
With 2.0.2241.0 dashboard !
Nice!
My childhood Xbox 360 console
Owner of a 2005 Xbox 360 launch model here, one that was actually refurbished by Gamestop at some point and had terrible work done to it. (Bolt mod to the heatsink + thermal paste replaced without removing the stock paste) Removed the bolt mod and replaced it with its regular X-clamps, also did a proper thermal paste replacement on it, aswell replacing the GPU heatsink with a newer one with the heatpipe on it, in the end it works fine and gets a occasional gaming session on it tough its mostly a collection system. (also owner of a 2006 xenon running blades and a 2008 Falcon wich is my go 2 system when it comes to playing xbox 360 games on original hardware)
16:30 This disc drawer problem is common when using the console but it is much simpler to solve than beating your video game.
Changing the reader's rubber belt solves this problem, and it costs pennies.
That is the proper solution of course. But until then just give it a lil smack
@@IntellitechMobile No, don't give it a smack, just replace the belt.
@@vdochev as a TEMPORARY solution give it the lil smack
have 2 working launch models, i just love them
Got this in my recommended after just turning on my falcon 360 and finding the ol RROD. It was a birthday present from my uncle, it and a huge box of games. Literally just got it last week, and the power cord a 5 days before writing this comment. I got to play it twice, and it was fucking awesome. Went to turn it on, realized it wasn’t booting, looked down and sure enough, those 3 lights were red and flashing. Such a shame
My Xbox 360 was made in April 2006, and still works, and is in almost 100% perfect condition. It's a premium model too with the original 20GB HDD. It was never serviced, or opened. I did open it up to replace the thermal paste which was concrete.
I have all motherboard revisions except Corona & Winchester but I love Xenon’s. Mainly for the rare early Hitachis & Samsung drives, and the Chrome HDD & side grilles with the OG Chrome Trim controller
I had a launch 2005 that lasted until 2022. It red ringed and I had it fixed. Lasted another 5 months so it’s gonna get fixed again for free lol
I have 2 launch consoles in my collection.
1 is a Japanese region with mfr: 11-03-2005 on dashboard 1888, its never been taken apart. It came with full auto, one of the launch titles, and the original controller. Even has a demo of hexic HD, they most likely touched it a few times and never played it again.
The 2nd one is a 10-05-2005 xenon on dashboard 2255.The case is original, but it must've had a bad drive as it has a 2006 series drive and its missing the original hard drive, but it did come with the original controller. It works good though, i put fresh thermal paste. Unfortunately the holes for the case screws(long screws) broke off, these cases are deteriorating with time.
I got a 1888 console too, it actually originally had 2858 but if you have 2858 or under, you can have it downgraded
Awesome console man. I wish I had one of these, especially The Xbox 360 Launch Team Console (Lime Green, Gray and White) with the controller. So bad ass man.
nice, i have a december 2005 manufacture date u.s model myself. works fine & has metro ui, but it runs abnormally loud.
edit: never red ringed before :)
I absolutely hated Xenon after my launch 360 was sent in its cardboard coffin for "repairs" because DVD's wouldnt load, games worked fine but when I got it back all they seemed to have done is reset the system to factory settings and DVD's still would load. So admitted defeat and left it as i played games fine but after just 4 months or so I got "the ring" after looking at all the horror stories online about the xenons I just threw the f'ing thing in the bin and bought a JTAG'ed Jasper (NOT RGH) and here I am years later still lov'in it... recently discovered a huge library of indie games online im trying out. The $1 Zombie Game anyone? lol
yeah id like to see a repair video cracking open a xenon for sure!
The thing is that it’s only a true survivor IF the console still has the original silver warranty sticker intact. Lots of Xenons got new GPUs and resold by MS and you’ll know this if it has a square white sticker behind the faceplate. I’ve found many Xenons with newer GPU chips. It’s possible that this console had red ring before but put a better GPU in it lol
Mine still has the og operating system! 🥰
I have one on 1888 Kernel along with a 2858 new in box system. Only ever been powered on to check what kernel it was running
@@OPUS_TV that’s rad!
DON'T ACTIVATE ITERNET IN IT!
Do not play games after that dashboards year
do. not. connect. to. internet. please
December 26th 2005 was my 2nd birthday... This system has the same birthday as me
The console did not come out on December 26th 2005 💀
@@arpwcos2011 what does it matter I meant the specific system in the video not the actual release date of the console as a whole. I'm well aware it was released November 22nd 2005 but a few systems have manufacture dates before that
@@RyneMcKinney if you mean 2005 itself then correct, but if you mean christmas 2005 no. Unless yours must have been made at that time lol
@@arpwcos2011 u kinda came off brutal
@@Vascularityisgood70 I was sorta being stupid in the comments lol. I get it now. The console in the video was made on the main commenter's birthday.
Sweet to see those still working, I got lucky, I got, well not a launch model but is a Xenon from 2006, off ebay in mint condition marked as untested, turns out is working as expected given is good condition, it also has the NXE dashboard
I still have my modded slim working great still after cleaning it freaking love this thing. planning to buy older 360
The painted silver trim on the 360 lasted from November of 2005 to around February of 2006 give or take. I have a launch edition system from 2005. It was rebuilt by Microsoft in 2009, so it has a new non-defective GPU and newer model disk drive. Unfortunately I can't tell what its manufacture date is because the original sticker was removed and replaced with a service sticker, however the serial number still identifies it as a 2005 model.
I agree with you on the tv's. I hate samsungs. I have an LG thin Q and a SONY Bravia XR and I will never go back to non OLED yes they're more expensive but I'm sure everyone will agree that OLED is better than QLED any day I mean SONY uses LG panels for God sakes because they're good! Nothing beats pixels that are turned off for blacks rather than pixels trying to make the color black. If you have the money, go LG or SONY.
thats crazy, my 2013 360 slim died in 2019.
Put double taped soda caps underneath this model so the vents at the bottom can breathe. It's how I kept mine alive. However, I recently bought a slim because this model doesn't do hdmi and while it's a cool model and my first 360 it's annoying how it doesn't support hdmi. It also sounds loud like a vacum cleaner.
Imagine putting xbox one hardware in a 360 shell? That would be cool.
Might as well do a series X or S at that point
so i do have a 2005 360, but its got gray sides instead of dark silver. it still works great, but it will have the red ring of death when you first turn it on, so after about five minutes of it flashing, turn it off then back on again and itll work! still on the blades dashboard too. :D
just looked at one of mine, still has the microsoft silver seal in place and its day release, purchased it off ebay boxed complete
I have the same background on my LGTV
I agree that those are launch models, However. I have seen dark silver 2008 HDMI serviced/refushbished unites that were opened directly from microsoft! :) Extremely rare though.
That was exactly 3 years before my birthday
I have a xenon 360 that is absolutely mint but it has the grey hard drive, is it still rare or just normal, it never had the red ring or anything
Is there a way ro prevent a rrod
How quickly after launch did the Xenons get the updated GPU heatsink that had the heatpipe?
You never unboxed the mw2 console I was looking forward to it
I still am!
release date for uk was 2nd Dec 2005 mine is dated 19th December 2005 as i say silver seal still in place, id say mine is a true survivor, i have another early one but a bit later, i also have a release day 360S in gloss black and a release day xbox one with box and day one 2013 controller.
"Launch model" refers to the first batch of consoles released on launch day, Zeypher PSU don't exist. They're Xenon PSU (Really doesn't matter, just sounds dumb.).
Not sure what I picked up recently. Non HDMI, 16.5 volt version?
if you meant 16.5 amps instead of volts, it's likely a Xenon
i have a 360 from october 2005 but gamestop did a bolt mod on it and its on metro so ;/
bolt mod, I am sorry for you
@@tcscomment lol oh well
The gpu will die soon because
On off
On off…
The gpu hate this
yeah, fixing it with a towel or without the fans will work for 1/2 days if you are lucky. These fixes are basically killing the Xbox.
@@buzzulinifrancescoэто не ремонт. Это просто запуск скажем так. Там надо reballing делать
is 2006 3 28 considered release model
And you can play the Catherine game on the 2011 Dashboard
i found a working launch model in box the other day, i refuse to turn it on again lol
I'm getting a Xbox 360 from November 25th 2005 I don't really know it was yellowed and was $12.00
I have a 2005-10-31. Now THAT'S a lunch model. It doesn't work of course.
honestly if u have the equipment id reflow it. make it last longer!
nvm just finished the video. haha the old reflow method. just let that puppy burn
Reflow doesn't fix RROD permanently. Replace the GPU for a revised unit.
@@OPUS_TV uh, is it even possible to put a Jasper GPU in a Xenon or Falcon? because on PS3 it's actually possible now
@@tcscomment There are revised Xenon GPUs like the Elpis. You can retro fit a Jasper or Kronos GPU to a Xenon and Zephyr. But the board requires some work in order to make it work. Look up Josh Davidson Jasper retrofit
When they removed the blades for the 360, they started the downfall of xbox. It wasn't the xbox one and kinect fiasco.
Xbox fell off so early
10yrs of success
2000 - 2010 .
Ive got one that works perfectly, rare or nah
Definitely
MY DAD HAS ONE THAT HE CLAME WAS DEAD BUT IT WAS JUST THE VGA
it's a launch model but not a launch unit ;)
hi my name is k
Don’t break it lol
Can we play Gta 5 in this?
Yes
It’s nothing but a Metro dashboard… so it’s kinda worthless…
But at least it’s a launch model.
I still play GTA V on 360!!! 😂😂😂
no uno
Clean your desk
Ok
360 likes lol