2008 F250 Steering Gear Replacement

Поделиться
HTML-код
  • Опубликовано: 17 ноя 2022
  • Rollin through the pasture and the steering gear let loose. I figure if I am going to replace it, y'all might as well come along. Post any questions below, I try to answer them all!
  • Авто/МотоАвто/Мото

Комментарии • 15

  • @DieselMike
    @DieselMike Год назад +2

    Mike, these trucks do take Mercon V in the Power Steering. You were pointing at the V and saying IV (four) at the 25:46 mark. That is indeed the correct fluid for the 6.4L to my understanding. Have they changed the specs? Because I am about to change all my PS lines and will need to do a flush/refill after.

    • @USAF99
      @USAF99  Год назад

      Nope, you're ABSOLUTELEY CORRECT. That's a good catch. Guess I was pretty tired when I was making this! Going to pin your comment to make sure people see it! Mercon V (five) is the standard specified in the Workshop Manual.

  • @brianarevalos
    @brianarevalos 3 месяца назад

    Awesome video thanks.

  • @zachcrone5070
    @zachcrone5070 Год назад

    This may be a stupid question but why’d you pull the pitman arm off of the new box?

  • @juansebastianlopez8828
    @juansebastianlopez8828 10 месяцев назад

    How many quarts of Mercon V did u end up using?

  • @juansebastianlopez8828
    @juansebastianlopez8828 10 месяцев назад

    Hey did your hydraulic lines sit flushed with the box once you were done tightening them? Mine stopped and have some thread showing. They did screw in nice and easy and obviously I started them by hand.

    • @USAF99
      @USAF99  10 месяцев назад

      Yes, they will only go as deep as the taper at the bottom allows. As long as they didn't bind or cross thread going in and torqued with no issues, you should be fine. Some aftermarket parts store boxes aren't the same as the FoMoCo castings.

    • @juansebastianlopez8828
      @juansebastianlopez8828 10 месяцев назад

      @@USAF99 Thank you, I just installed a Redhead steering box. Test drive felt NICE. Hopefully it stays that way. Also will be doing the upper and lower ball joints. Thanks for all the info in the videos, I play them as I'm doing all my mechanical jobs lol.

  • @juansebastianlopez8828
    @juansebastianlopez8828 Год назад

    Hey bro, did replacing the steering box fix the steering wandering?

    • @USAF99
      @USAF99  Год назад

      It can, but I have more to come on that. Look for another video soon!

    • @juansebastianlopez8828
      @juansebastianlopez8828 Год назад

      @@USAF99 Mine is so annoying and I was hoping that by changing the steering box it would get better.

    • @USAF99
      @USAF99  Год назад

      @@juansebastianlopez8828 hold tight before you do- I will have a video this weekend that might help you.

    • @juansebastianlopez8828
      @juansebastianlopez8828 Год назад

      @@USAF99 Awesome thank you.

  • @Magiqfish
    @Magiqfish Год назад

    Turbo replace when? seqSus

    • @USAF99
      @USAF99  Год назад +1

      Shhhhh.... we already did that and don't want to again soon!