I just sent a listing to my wife for the actuators and told her to order them for me! The machine as is with the clicking plastic gears is a pile of crap! The biggest arm on mine has already failed after 2 months of use. Also, I am in the process of making a huge excavator that will have about a 6' reach and be able to lift about 200 pounds. I want it large enough where I can actually trench a pipe in my yard. I will be using HyperTough cordless drills that cost $10 each from Walmart to drive each part. I wont be using batteries, they wont last long enough. It will be corded, and using a power supply. I plan on making a bucket that will be about 8" wide. I bought all the steel to build it, and threaded rods and nuts. It will not look fancy, but it sure will dig!
verdade, e ele consegue adaptar o controle analógico também de 2 joysticks e as esteiras de metal, fica identica a 1580, esse bicho é um gênio kkkkkkkkkkkkk
Nice job.... I had a go with mine but didn't have a desk top to work on as we live in a tiny flat. So..... I started work on the washing machine with a nice clean white towel on top.. Went to the toilet and in the interim the wife had come in and filled it with laundry and turned it on... I managed to find most of the bits and pieces and rebuilt it as best i could.. Problem is it looks more like Frankenstein's version of a 550 now..... Still.. My pants were clean for the next few days.... Your vid is great but even slowing down playback speed it was too fast for me to try and recover my beloved 550..LOL.
Linear actuators will be a costly affair for us to try in India. But your effort is an appreciable one since many of the toys rc ones are damaged by children while playing which can be reused provided money power needed for purchasing these linear actuators.
Nice Work! Cool results! But you haven´t limiting switches installed, have you? What do you think about replacing the circuit board and the remote of the 1550 by the circuit board and remote of the 1580? Would it fit and would it make sense?
I just sent a listing to my wife for the actuators and told her to order them for me! The machine as is with the clicking plastic gears is a pile of crap! The biggest arm on mine has already failed after 2 months of use. Also, I am in the process of making a huge excavator that will have about a 6' reach and be able to lift about 200 pounds. I want it large enough where I can actually trench a pipe in my yard. I will be using HyperTough cordless drills that cost $10 each from Walmart to drive each part. I wont be using batteries, they wont last long enough. It will be corded, and using a power supply. I plan on making a bucket that will be about 8" wide. I bought all the steel to build it, and threaded rods and nuts. It will not look fancy, but it sure will dig!
Please tell me you did this
I've been following you since 70,000 subscribers. I'm watching from Turkey do not miss any video. All extremely fascinating videos.
Kerem Polat sa
Kerem Polat
@@rohidasborkar2582 efendim
Sir you absolutely done well
You're already genius to me
I'm proud of you😢please give thumbs👍 up for this man💗
Whats so genius about replacing a servo on a simple rc vehicle?
Você é brilhante! Sua inteligência é notável, fico impressionado com seus trabalhos. Parabéns!
verdade, e ele consegue adaptar o controle analógico também de 2 joysticks e as esteiras de metal, fica identica a 1580, esse bicho é um gênio kkkkkkkkkkkkk
ruclips.net/channel/UCiXsJ-qrjJfszkrJWFj7BlQvideos
You are most genius awesome 😘😘 brilliant brother
Rinku Pandey ?
Kp
Nice bro we know you are the best 😍😍😍😍😍😍😍😍😍😍😍😍😘🤩😗😙😚☺️🙂😊
well done excellent video enjoyed it big massive difference make sense .
Suuuuuuuperb video 👏👏👏👍👍👍👍👍🧡🧡🧡🧡🧡♥♥♥♥♥♥♥♥♥♥
Very good 👍
You sir ...are genius ..thank you for making your vids !!!
He really did a number on that excavator! Wow!
Красава!!!! Отличный тренажёр для обучения экскаваторщика!!!
Thanks very much, you did a great job filming and showing us how to do it .
Wow 👍👍👍👍🤝
very nice and cool.
really good.
brilliant........the weighing down of the base alone is a great idea....mine wants to tip often ...will buy a kit and do this,,,thanks..
So more powerful, incredible
Proud to be an indian 🇮🇳🇮🇳🇮🇳 jai DRDO scientists 🇮🇳
But a heavy weight at the bottom underside of the X.. Great job!
Ohh you did :) I wasn't that far into the video
@@TonyS1 I used automotive wheel weights that stick on.
Nice job....
I had a go with mine but didn't have a desk top to work on as we live in a tiny flat.
So..... I started work on the washing machine with a nice clean white towel on top..
Went to the toilet and in the interim the wife had come in and filled it with laundry and turned it on...
I managed to find most of the bits and pieces and rebuilt it as best i could..
Problem is it looks more like Frankenstein's version of a 550 now.....
Still.. My pants were clean for the next few days....
Your vid is great but even slowing down playback speed it was too fast for me to try and recover my beloved 550..LOL.
Very clever. Thanks for the video
Brilliant 👍
nicely done :) loved it 🤩
VERY GOOD DIY !!!!!!
Nicely done
💪💪💪💪Exelent work exevator
Awesome work, bro!!! 😃
Awesome nice
Çok güzel olmuş
Крутотень несусветная!!! Эх, в мое бы детство, да такие игрушки!!!
Гоу беспилотный экскаватор на 0,3 куб метра!!! Поддержите лайками!!!
សុំ ឧស េ
សដដខថវ
EXCAVATORS is very good
Linear actuators will be a costly affair for us to try in India. But your effort is an appreciable one since many of the toys rc ones are damaged by children while playing which can be reused provided money power needed for purchasing these linear actuators.
The best. Very good.
Good video 👍
Nice.
You are really genius!
Very good
Really nice job.
Wow great video
I love this 👍👍👍😘
@Doremon thanks
Canal mais top que eu já vi parabéns, aprendo muita coisa aqui nesse canal.. 👋
Excellent
I liked this edition .
can you DIY another more powerful one with aluminium arms .
Mostafa Alakhreety sahi bola bhai alominium ka jcb powerful aur low bajat me banna mangta
@@SHOIBFIGHTER
sorry I can't understand you .
can you speak English or Arabic ?
Nice video
Very clever with your hands. The only thing I don't like is that the servos are a lttle fast compared to the "real thing"
Bro Iam you're fan
nice tutorial
So much better. Why doesn't huina make them like that? People would gladly pay the money if it worked that good.. id buy one today.
Bro you're awesomely creative👍👌😧👏
I'm the same way. DON'T be afraid!
Muchas gracias por su video,mersy thanks que crack me lo voy hacer gracias a usted☺️
Nice to day video Like
Brain: Пинки нам нужен этот экскаватор чтобы захватить мир!
Pinki: Бряк
You always the best
Thanks fro your video, my friend. With this Upgrade, does the original battery still work? Or you need a more powerful battery?
Very impressive , Wow.
Как корабль назовёшь - так он и поплывёт)
Александр Енергетик точно
Mantap bang 👍👍👍👌
Nice
bravo
I really like it
Mantap pokoke mantap
Nice amigo 😀👍
SUPER INOVATION
Nice Work! Cool results! But you haven´t limiting switches installed, have you?
What do you think about replacing the circuit board and the remote of the 1550 by the circuit board and remote of the 1580? Would it fit and would it make sense?
Awesome idea :)
Good job
Good job👌👍👏
Cara voce e um crak .se eu morassi perto queria que voce comsertaci a minha tambem .parabens
ŞU VİDEONUN GELMESİNİ DÖRT GÖZLE BEKLİYORDUM
Bende beklemiyordum türk
This looks so fragile! can you even get in some water with those tracks?
Love the work you've been done to it! 💪👌
It's nice
Next Huina 580 full metal 🙏🏼
Such a cool video but thats a lot of work for someone like me. Definitely worth the upgrade where do you get the servos from?
There on Amazon, Ali express, banggood, eBay. I got mine on Amazon for $50
Just keep the good work = good ideas
👍👍👍
Just remember to cut the holes a bit bigger as so they can pivot up and down
Nice perfomace
ficou semelhante o 1580.sensacional
🌟Good work🌟
Oloko o cara desmontou o brinquedo para fazer upgrade daora
wow
Keren banget bang senggol dong 👍
Nice work, video speed a bit to fast, i order the motors and now my turn to fix it😁
On my PC, I can change the setting to 1/2 speed. Helpful.
good job bro
Keren kak ❤
Ada perubahan di receiver gak bang? Kan untuk keruknya bila tanpa servo kan cuma butuh 1dinamo penggerak.
Bacana gostei
Wondering if lower arm actuator can be mounted in reverse, the large end down at body end , thanks , great video
Your are supper bro
Awesome!!!
keren
I guess its just a toy after all,, but I wonder about the reliability of these servos when that sand eventually gets into the acme screws!
สุดยอดมากครับ
Видео о том, как из HUINA сделать нормальный экскаватор👌
Good~Good👍
Good
Do one vedio on all tools you having
Very nice moter ka name and price kya hai please conform
Mantap👍
if any body can this dude can