Hey I was having the same issue with a Paperang P2 thermal printer that connects to a smartphone. You showed the use of alcohol in a pen. I didn't have any but I was able to clean mine with a little hand sanitizer on a piece of tissue and before I cleaned it there was this black stuff on the head and after cleaning, the black gunk was gone and my printer works as good as it did when I made my first print out. Thank you.
Very good day, first of all, congratulations on the videos you upload, they are always very useful and have particularly helped me a lot. Please keep uploading videos like this. Please if you can help me with the following: I have a TM-T20ii that sometimes prints perfectly and other times it stops on the first line, check the motor, sensors, clean the head. When it prints the print is of good quality. I have tried it with the startup test by turning off and holding down the “Feed” button and sometimes it prints the entire report, sometimes only the first lines, sometimes up to half and it throws an error. When I turn it on normally, the error light comes on for a second and then goes off (I don't know if it's normal). I have another similar printer and it was working perfectly, but when I cleaned the head (with a cotton swab and isopropyl alcohol, printer turned off and then I blew to evaporate all the alcohol) the same thing started happening to it (I have seen some people do it). They clean with WD40, I don't know if it is recommended). I don't know if after cleaning you have to reset something. Both printers have less than 4Km of head usage (they last 150KM), when they print the quality is good. However, I don't know if cleaning damages the head, but I followed the steps that the website recommends doing for this purpose. It would help me a lot to know your opinion, if something similar ever happened to you and how you solved it, thank you very much in advance for everything.
Hi I m facing a problem on client side on POS when He printing an invoice on Receipt Printer the printer will print Half bill then a blank gap and then remaining items will b print ......what is its solution
This is the only instruction that solved my problem! I didnt know the paper had only one "right" side! Thanks!
Short, sweet, simple, and fixed exactly what I needed. Thank you so so much!!
Hey I was having the same issue with a Paperang P2 thermal printer that connects to a smartphone. You showed the use of alcohol in a pen. I didn't have any but I was able to clean mine with a little hand sanitizer on a piece of tissue and before I cleaned it there was this black stuff on the head and after cleaning, the black gunk was gone and my printer works as good as it did when I made my first print out. Thank you.
Thank you. I learned a lot watching this.
This was so helpful! Thanks so much for the great walk through
Thanks. Had a label fold and leave glue on the head. Alcohol and a soft edge got it clean.
Very good day, first of all, congratulations on the videos you upload, they are always very useful and have particularly helped me a lot. Please keep uploading videos like this. Please if you can help me with the following: I have a TM-T20ii that sometimes prints perfectly and other times it stops on the first line, check the motor, sensors, clean the head. When it prints the print is of good quality. I have tried it with the startup test by turning off and holding down the “Feed” button and sometimes it prints the entire report, sometimes only the first lines, sometimes up to half and it throws an error. When I turn it on normally, the error light comes on for a second and then goes off (I don't know if it's normal). I have another similar printer and it was working perfectly, but when I cleaned the head (with a cotton swab and isopropyl alcohol, printer turned off and then I blew to evaporate all the alcohol) the same thing started happening to it (I have seen some people do it). They clean with WD40, I don't know if it is recommended). I don't know if after cleaning you have to reset something. Both printers have less than 4Km of head usage (they last 150KM), when they print the quality is good. However, I don't know if cleaning damages the head, but I followed the steps that the website recommends doing for this purpose. It would help me a lot to know your opinion, if something similar ever happened to you and how you solved it, thank you very much in advance for everything.
Hi I m facing a problem on client side on POS when He printing an invoice on Receipt Printer the printer will print Half bill then a blank gap and then remaining items will b print ......what is its solution
My work needs to do this!
Hi awet use this printing haw Mach the price cani use for plastic?
Thank you. I was able to serve my client today.
Thanks a lot I’ll try tonight
Thanks for sharing! Just know there is thermal printer cleaner... nice info!
Thanks for the infor👍
When the printer is printout and balance paper goes inside what’s the issue
epson tm-t88iv why keep going out of paper
Great useful video, thank you for sharing.
Thank you
Nice video, please help me for essae thermal printer head, button setting
Memerlukan lebih ramai orang jadi sebarkan video ini lebih banyak
What a shit printer having to mess with dip switches