I just ordered my first kit : ) This is the one I ordered. TAM58625a glad to see your body work. Great video! I wasn't sure how to do it. I just ordered an hr ago from Horizon Hobby. I think they will be ok. I had to wean myself from Amazon. They treat me like a step child.
@@ShockwaveTheLogicalTamiya body set #1584. My rear seems to sit a little forward in the wheel wells. Have to check that I have all the control arms correct for the 257mm wheel base
Just ordered my first kit as well… did you use anything special to set your decals? Soapy water?… anything like that… if not, you did an outstanding job brother!!
I've built four TT-02 cars so far (you know because you just keep ending up with almost spare parts enough to build another and another... 😂) and my first build was a kit Autech Motul R35 ! Good choice btw! Anyway i have a TrackStar 13.5t, 9.5t and 7.5t. In my third build (affectionately dubbed "3Rd Da Turd" since was made of all spare parts.😆) I'm using a TrackStar Turbo 80a ESC w/ the 13.5t. It moves well on 2s.. and on 3s its just mean. I wanted to remove the 80a Turbo and use the kit included TBLE-02S since its a correct turn motor and sensored is required for that ESC and the ESC is just sitting there doing nothing! Grrrr! That way I can move the Turbo 80a to the 5th build waiting! I was wondering how you found that 13.5t & ESC combo to perform? On the TrackStar 80a Turbo the 13.5t is fantastic, surprisingly so. Do you think the TBLE-02S will let me down much? I read it produces only 30amp in brushed mode and 60amp in brushless. But absolutely NO 3S capability! Thats ok, and i have a LiPo alarm so no sweat there, but wanted to hear what you think , I will be using it onroad only, no drift, just a leisure basher for friends to use really. P.s. i have that exact model Surpass 60a esc from 3 years ago from Amazon. Its been on an F540-4370kv in my original belt drive Optima and on a F540-3930kv in my other original Optima with chain drive. Both needed custom wheelie bars added! I've had that 60a in a 1/8 Vaterra Glamis Fear on a Spektrum 3652-3300kv and it loved it, been a rock-solid, budget, performance machine; even ran it 3s (obeying the directions of course) and it's still kicking in a Mega Senton turned Brushless on a 3660-H.P.I. FLUX 4000kv using 8.4NiMh! ESC loves it! Been wet, been dirty, but it's still pumping the juice!
TBLE-02S is actually pretty punchy on a 10.5T in a rally car, just give it a cooling fan if you're worried, and if it burns out then you have a perfect excuse for number 6 🤔
Hey man, love your videos, I ordered the same motor and esc except mine is 2200kv, I got the highspeed gear set and yeah racing mount, which pinion should I get? going to be used in a rally car so wont be trying to break any speed records, just go with the hard coated? or what would you recommend?
@curtisprice5678 Was thinking the same thing, as they caught my eyes right away. Probably just some $12 e b a y specials. Nothing specials just a nice style.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Just getting back into RC and bought a TT02 kit. Nice build and nice detail on the body.
Awesome job!! I just got the same shell, I hope mine turns out as good as yours! Thank you
I like those stone plates! Going to get some of those for my TT-02 chassis!! Good find 👍🏻🙌🏻 Great video too
Thanks 👍🏼 yes such a simple idea which just works! 👍🏼
Are for protection from dirt and gravel ?
Great upgrades and a nice job. The colour's awesome, too. I enjoyed watching💪👍
Thank you 😊 👍🏼
I just ordered my first kit : ) This is the one I ordered. TAM58625a glad to see your body work. Great video! I wasn't sure how to do it. I just ordered an hr ago from Horizon Hobby. I think they will be ok. I had to wean myself from Amazon. They treat me like a step child.
Nice TT02 and upgrades. Bodyshell looks really good as well!
Thank you 😊
Where'd you get it from?
@@ShockwaveTheLogicalTamiya body set #1584. My rear seems to sit a little forward in the wheel wells. Have to check that I have all the control arms correct for the 257mm wheel base
@@cheagle464 cheers dude. Got a skyline body on mine but the wheel arches are a little big 😅
@@ShockwaveTheLogical mine too, my hobbie shop guy is a big Tamiya fan. He may have an idea about wheel and tire maybe(?) also
I have the same kit..although I did mine in black with no stickers. That's gotta be the best looking tt02 I've seen. Great job!
Ah thanks 😊 great body shell isn't it 🔥🔥🔥
the R&D Sport Fuji 2014 BRZ is a close second
Just ordered my first kit as well… did you use anything special to set your decals? Soapy water?… anything like that… if not, you did an outstanding job brother!!
Those plastic covers for the webbing are cool, but I found it limited the servo arm when steering left.
Uhmm how is going to a 40 euro brushless combo a upgrade if only the motor that came off is a 60 euro sensored motor. And way more precise
❤❤❤❤
Nice build🏁🏁🏁🏁🏁💪🏿💪🏿💪🏿
Thanks pal 👍🏼
Good job.😉
Thank you 😊
I've built four TT-02 cars so far (you know because you just keep ending up with almost spare parts enough to build another and another... 😂) and my first build was a kit Autech Motul R35 ! Good choice btw! Anyway i have a TrackStar 13.5t, 9.5t and 7.5t. In my third build (affectionately dubbed "3Rd Da Turd" since was made of all spare parts.😆) I'm using a TrackStar Turbo 80a ESC w/ the 13.5t. It moves well on 2s.. and on 3s its just mean. I wanted to remove the 80a Turbo and use the kit included TBLE-02S since its a correct turn motor and sensored is required for that ESC and the ESC is just sitting there doing nothing! Grrrr! That way I can move the Turbo 80a to the 5th build waiting!
I was wondering how you found that 13.5t & ESC combo to perform?
On the TrackStar 80a Turbo the 13.5t is fantastic, surprisingly so. Do you think the TBLE-02S will let me down much? I read it produces only 30amp in brushed mode and 60amp in brushless. But absolutely NO 3S capability! Thats ok, and i have a LiPo alarm so no sweat there, but wanted to hear what you think , I will be using it onroad only, no drift, just a leisure basher for friends to use really.
P.s. i have that exact model Surpass 60a esc from 3 years ago from Amazon. Its been on an F540-4370kv in my original belt drive Optima and on a F540-3930kv in my other original Optima with chain drive. Both needed custom wheelie bars added! I've had that 60a in a 1/8 Vaterra Glamis Fear on a Spektrum 3652-3300kv and it loved it, been a rock-solid, budget, performance machine; even ran it 3s (obeying the directions of course) and it's still kicking in a Mega Senton turned Brushless on a 3660-H.P.I. FLUX 4000kv using 8.4NiMh! ESC loves it! Been wet, been dirty, but it's still pumping the juice!
TBLE-02S is actually pretty punchy on a 10.5T in a rally car, just give it a cooling fan if you're worried, and if it burns out then you have a perfect excuse for number 6 🤔
What camera? Looks perfect for rwd drift rc.
I burnt 3 of those on 3s 2s there fine but they can not handle 3s they did fly but then a huge smoke shows
Sehr schön. Wie bekommst du es hin dass die Karosserie so schön tief sitzt? Bei mir sind es ca 2 cm zwischen karosserie und Reifen 😅
Hey man, love your videos, I ordered the same motor and esc except mine is 2200kv, I got the highspeed gear set and yeah racing mount, which pinion should I get? going to be used in a rally car so wont be trying to break any speed records, just go with the hard coated? or what would you recommend?
I would just try a hard coated one to start off with maybe the same size as the kit pinion 👍🏼
Unreal! Where did you get the wheels and stickers for the tires?
Thanks 👍🏼 they were both off ebay! The wheels came from China and the tyre decals somewhere in the UK
😎👍🤙
Hi I’m playing without sound so not sure whether you said or not but how many coats of paint did you give and and which paint was it?
It was 4 coats of paint of gun metal and 3 coats for the black parts 👍🏼
I'm kinda stupid, What's the blue tape for on the clear body masking.
Can i ask for the link for black plastic cover on the steering. Thanks
If i use a 3650 brushless motor,does it need a different mount or uust use the stock plastic one?
That looks great , well done
Sub 300 for ya
Thank you 😊 🙌🏼
What's the white wheel/tire combo you have here?
What did use to mark your wheel arches?
can you tell me where you buy sticker for tire wheels ?
How come you went with a 3650 and not a 540. Pinion should of tryed a 23t🤷🏿🏁🏁🏁
Just wanted to try something different tbh thanks for the comments 🙌🏼
Really enjoyed watching your build 💪🏿💪🏿🏁🏁🏁
To 9:38 : Wheel spacer: I still had rubber rings (front and rear on the axle)
Whats the name of those rc rims and what offset are they
@curtisprice5678 Was thinking the same thing, as they caught my eyes right away. Probably just some $12 e b a y specials. Nothing specials just a nice style.
the combo u alreadychad was absolutely amazing and far better quality than that cheap combo u just installed, u downgraded the car
What were the parts at 9:10 the standard ones keep popping out
They're the universal shafts in the description
🤪😎😎😎😎💥💯💯💯💯
Revise Japan
ニッポンを元気に