O melhor vídeo que já vi a respeito de alto falante, muito criativo e tem muita habilidade, além de ter um verdadeiro conhecimento para transmitir, meus parabéns.
thank you for the tutorial i made it and it works perfect but the amplifier was way too powerful the speaker heats up and smaller amplifier doesnt give much of bass thanks again it was awesome built
pretty rad video bro, very impressive! make something out of nothing and better then previous, if I didn't know we was talking audio, I would say that's the formula to building a fast Honda.
i measure in terms of the size of the magnet and take into account the high and low of the magnet. and also the sound level we need. if you want high bass, the wire should be quite large. if you want medium, reduce the size of the wire. and many more that I take into account too long for me to tell.
1:32 how did you remove the speaker tray with out damaging it? i tried it many times and busted 4 mini speakers but i damaged the tray while removing the magnet. Pls reply how did you remove it like that
I remove it by using a flat screwdriver and a kitchen knife. but with full precision. do not ever knock. it easily damages the structure of the speaker.
Olá, pra você remover os imãs e todo o anteparo do falante, você coloca ele dentro de uma panela com água fervente, derrete a cola, ou você coloca dentro de uma panela com solvente thinner.
you mean, prepare with the box? if the box is already in the video part 2 in this channel. but I'm selling it. but also if you're near me maybe I'll just give it for free. where are you from?
I have a full range speaker but I want to turn it to a subwoofer for more bass. Will it work well if i transfer the cone to another subwoofer basket which can support a larger voice coil?
Its not a DIY...🤣.. it is how to dostry your money a and time.. if you want some bye a new one.. but if you have all the utilities then you can do this👏👏👏
maybe you use a Spyder with a small indentation. for the subwoofer, it should be a large indentation. if it is small, the vibration is limited. hard or soft Spyder, no problem, the indentation is big or small.
or look at the foam ring, do you use a thick one, if it's too thick your speaker will be hard. use a thin one so that vibration is easily generated. the selection of spyder and foam ring is important it is likened to a spring
I approved this one. I have seen alot nonsense videos on subwoofer but not this one. Good work bro.
This is by far one of the coolest how to videos
This is crazy man! Unlike many videos out there you made a proper woofer!
thank you bro..😉🤝
@@Saiful81 kamu orang mana
@@youtuberssetres3775 Malaysia
O melhor vídeo que já vi a respeito de alto falante, muito criativo e tem muita habilidade, além de ter um verdadeiro conhecimento para transmitir, meus parabéns.
Mantap bos ku 👍👍
Bisa bangkrut pabrik speaker karena inovasi mu
Lanjutkan
Sukses selalu buat mu kawan
😆 ada aja kamu. terima kasih sahabat 😉🤝
I found this video in My recommendations after I bought 15 cheap souround sound systems to tear a part, looks like a new project to me.
How'd it go
so its been 2 years. did it go well?
@@sethunthunder I don’t remember but I don’t think it worked well
This one is amazing..! Scisors.. Coke in can.. And boom..! A upgrade is done..!
👍😊
You have beautiful ideas I like your videos 👍👍👍👍👍♥️👈
fully watched 👍🥰🥰🥰🥰
I appreciate those words. Thank you friend.
thank you for the tutorial i made it and it works perfect but the amplifier was way too powerful the speaker heats up and smaller amplifier doesnt give much of bass
thanks again it was awesome built
thank you bro it was nice please mention the units of coil how much length your takeing please make a video on how to make a two way vice coil
👌👍
Me encentiva a fazer um Também 👏🏻👏🏻👏🏻👏🏻👏🏻 eu vou fazer
can you make 12 inch subwoofer with double magnet and voice coil🙏🏻😅
by the way, I like your video 👍🏻💪🏻🔥🔥🔥
👌👍
वैसे
pretty rad video bro, very impressive! make something out of nothing and better then previous, if I didn't know we was talking audio, I would say that's the formula to building a fast Honda.
Just the fact that works 💪 is amazing
So how do you know the distancing of Coil from the yoke & top plate magnet? there's a standard measurement for it are you just guessing?
Coil should suspended b/w both
Keep making these videos I love them pls make a 1 inch subwoofer
What..😮 1 inch..😅.I will try a little more time. Because it's small ... it's complicated again.
@@Saiful81 thank you bro you can get a 1 inch su woofer in jbl
Very nice, this cool idea.🎉🎉🎉
Salve sou brasileiro ficou muito bom esse alto falante parabéns novo inscrito 🇧🇷
🤝👌
Keren & kreatif 👍
To make coil of speaker in this video bro how much mm used and how much coils wire turn
Mak aih pro giler² tahap mcm ni skali
Terima kasih..sudi menonton..
How much do you evaluate this subwoofer, the wattage in the impedance??
i measure in terms of the size of the magnet and take into account the high and low of the magnet. and also the sound level we need. if you want high bass, the wire should be quite large. if you want medium, reduce the size of the wire. and many more that I take into account too long for me to tell.
Оооочень круто продолжай делать такие вещи.!!!
Woooow 😮so beautiful brother i am required please request mayreliya 2 sound box one sub uffar how to price i am send
what material did you use to make the speaker cone??
cardboard
De que calibre usaste el alambre de cobre?
parece calibre 8 o 10
1:32
how did you remove the speaker tray with out damaging it? i tried it many times and busted 4 mini speakers but i damaged the tray while removing the magnet. Pls reply how did you remove it like that
I remove it by using a flat screwdriver and a kitchen knife. but with full precision. do not ever knock. it easily damages the structure of the speaker.
Olá, pra você remover os imãs e todo o anteparo do falante, você coloca ele dentro de uma panela com água fervente, derrete a cola, ou você coloca dentro de uma panela com solvente thinner.
Или же нагрейте газовой горелкой, но будьте окуратны!!!! , магнит может поменять свою структуру и намагниченнось
So nice power ful subwoofer 😮😮😮
10 inches speeker dable magnet and pepar kattali pls bro Replay me
Can you pls tell me how tinny the copper wire need to be😊
😢how many turns in the coil how much is the depth?😊
with this small magnet can it work for 8 inch speaker ?
How did you get the Eva foam to be in that shape normally Eva foam is flat smd not in that shape of a Sorround
Cool idea with the aluminum can for a metal woofer.
que se usa para poder soldar ese tipo de metal?
Giỏi lắm nha 👍🤯😄
Amazing work Man 👌👌
Istimewa
Where did you get the pole piece?
Which mather board you are using in video to play the music please answer me 🙏🙏🙏
do you want to see it. coming up i will show every video coming up😉😅
Con mayor excursión suena más todavía?
Yes
Very nice 👌👌
👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👍 una obra de arte
Im made speaker similar yours, im use same vire 0.25 but i get 0.3ohm and speaker dot working, please help me
sir do you have finish products that can we buy?
you mean, prepare with the box? if the box is already in the video part 2 in this channel. but I'm selling it. but also if you're near me maybe I'll just give it for free. where are you from?
Mas bro, koilnya brpa x turn (putaran)?
Penutup cone tengahnya dri alumunium ya?
Thx buat kontennya, trs lnjut...
Terima kasih..Ya bro..itu alumunium.Berapa turn itu saya tidak pula kira.😅. hanya mengagak kesesuaian sahaja.
Brother, it's very nice, congratulations , 8:00 If anyone knows the name of the song, please write it
thanks. but all the songs i use. are chosen spontaneously and i don't see the title. as long as it sounds good. i take the song.
what is the thing you used to power it i need one
Whats the first song displayed on the finished speaker in the intro?
What are you using as a glue ?
88
I have a full range speaker but I want to turn it to a subwoofer for more bass. Will it work well if i transfer the cone to another subwoofer basket which can support a larger voice coil?
U need low frequency crossover
You just need to add passive subwoofer crossover (3-6dollar i think)
What the max watt it can hand and can u build a box for it
with a magne as small as, wat is not as big as anything. only 40w
@@Saiful81 that's still impressive for being so small tho
What is the watts
What's the name of song at 8 minutes?
Untuk speaker bluetooth cocok nih
Pasti boleh.. sahabat 👌😉
How to make a subwoofer 🔊
1.First by every single part from online
2.second make it
really cool i would like 2 hear it with a box
ngeriiii lueeeerrrrr josss
ngl its not bad no coil rub some mechanical noise but slap it in a decent box and it shouldn't sound half bad 👍
Can you make 2 inch subs?
please make box for the speaker 🔊
co to jest za klej który używasz do zrobienia cewki?
На вид как супер клей
it's homemade glue, which is made from fiber resin and I use a container of super glue to make it easier to stick to the object.
Where did you get your surround
did you notice at the end of the video I already showed at the end to the back. that's it
Its not a DIY...🤣.. it is how to dostry your money a and time.. if you want some bye a new one.. but if you have all the utilities then you can do this👏👏👏
if there is something wrong with my friend's eyes. I apologize.
@@Saiful81 ok.. i took my words backward dear.. but sometimes the smart work is more efficient than hard work.
@@anupamrathore224 yes .. maybe each other's way.
Bass I love you😍
Muito bom 👏👏👏😌
Amazing!idea
Nice 👍
neat little sub
Its like a monster subwoofer
This is mind blowing
what confuses you
@@Saiful81 its bass 😱 you are a genius man
How many turn for coil bro
I am your new subscriber 🙏 😳😳😳👌👌👌👌
🤝 Thank you for the support😉
Your welcome buddy keep IT up 🔥🔥
Now put that in a enclosure with a 2" port
Good job
Mantap bang sukses selalu 🗿
Dj nya untuk cek sound apa bang
Thanks..Kurang pasti judulnya
such telented person bro
tambah gler rakitane dewe yo bos
Nice job 👌
How to speaker 12" magnet 18" pliss
are you for sale?
😮if you are on my side. I will give it to you for free without any payment whatsoever😅
Ok sayang Nya jauh kak aku di Indonesia
Ooh😊..sayang sekali..cuba lah membuatnya,apa pun brewog musik dihati..👍
Nise video
vc botou o imã contra o outro?
boleh pesen kang?
Jauh 😄
🤣 josssss👍👍👍 spekernya
Boleh di coba.bro
👍
Mantap bang
😉🤝
Soldastes la canasta y los cables no 🤔🤔🤔
Questions
- cone material
Cone material
Luar bias
Wow nice
Pedahal seru videonya tapi sayang perosesnya di percepat
Bro my 4 inch subwoofer not going up and down how to solve it and spider are also hard (Amplifier 6283) and bro how to make our spider smooth
maybe you use a Spyder with a small indentation. for the subwoofer, it should be a large indentation. if it is small, the vibration is limited. hard or soft Spyder, no problem, the indentation is big or small.
or look at the foam ring, do you use a thick one, if it's too thick your speaker will be hard. use a thin one so that vibration is easily generated. the selection of spyder and foam ring is important it is likened to a spring
@@Saiful81 yes bro my spyder is and Ring is too hard
Super project❤❤
Wow 😍😍😍😍😍😍😍
Good👍
I love it
I was done when he wrapped his own voice coil!!
Сделал мусор из мусора, молодец
Wow idol.
mas tutorial buat speaker 10 inch
pakai magnet neo bentuk coin.
Sudah saya membuatnya.anda boleh melihatnya dalam channel ini.terima kasih bro
@@Saiful81 yang sudah pernah dibuat kan magnet neo cuma ditengah
maksud saya
pakai magnet neo berbentuk coin kecil kecil.
Ohh..saya faham..👌 next projek ok.
@@Saiful81 oke ditunggu
@@Saiful81 next time cuba guna lagu brewog bro bagus bass tu
Keren bro