I appreciate all of the great camera angles that you used so we could really see all the intricate work that you did on this amazing piece. Stunning repair work - so intricate and well-thought out.
This was my first job after University in Viet Nam. Toluene is quite toxic and I had to use it to soften glue all day and inhale it. This video brings back a lot of memories 👍👍
Честно скажу, очень здорово когда такие как вы даёте вторую а может и третью жизнь вещам, на которые многие люди уже не возлагают никаких надежд, за ролик большое спасибо.
это лишено смысла. это изначально дешманский и посредственный был саб. если изначально на заводе в эту голову и вкладывались хоть какието технологии, то как видим подвес, центрирующая и сам диффузор уже просто от фиг знает чего. в итоге у вас голова стала самой конченой, с толстенным подвесом и бумажным диффузором никакущей жосткости - самый смак для саба =)
Was erwartest du? Er baut die chancis ( lautsprecher) völlig falsch zusammen. Die können nicht gut gelingen. Mir würde so was nicht ins Wohnzimmer kommen. Nicht mal in den Party Keller
In throw away world, thisnis refreshing to see. Most ppl these days do not have the skills or patientce to do anything like this so they say " easier to buy a new one". This guy does great work. May not be financially cheapet to rebuild but is alot better than new
@@kamaumike6873 its not that its "better" its that he has the skills to do what he does. Im sure ypu couldnt do what he did, i can and do as much as possible. Throw away society now days. Ive been installing car stereo for the last 28 years , trust me when i say there are alot of amps and subwoofers that are older that are much better than brand new ones. Kids are raised to just throw stuff away now, no one even cares to try and fix anything, its kind of a lost art. I remember when there were shops to repair tvs and stereos, now they get tossed and a new one bought. The throw away generation has created shitty build products thay are designed to last a short time and be thrown away. Its a bad cycle, make trash, throw in trash, buy new trash. Fills our landfills
@@erik120719 I fixed an old work clock I found in a bin once. Took me 2 hours haha. Rust on the "motor" contacts. All those quartz clocks use a resonant crystal stepped down through a digital counter to a "motor" that flips 180 degrees of rotation every second. This is then reduced through a 30:1 reduction to run the second hand, a further 60:1 to run the minute hand, and a further 12:1 to run the hour hand.
Great job. However, it would be very useful for your viewers if you could let us know what you are doing (some narration or sub-titles), what chemicals you use, etc.,
I'm speechless seeing this attention to details work you've done. It's very professional, love it. I'm watching from Nigeria, please where in the world are uploading this video? Will like to get in touch with you ❤❤❤❤🎉
Anyone in the business seeing potential of something others dont is priceless. Hopefully you can pass this on to others who will be your successors. The gift stays intact because you create a legacy
Excellent work! I love seeing your videos of saving electronics, so satisfying! I just blew my JBL W12GTi- MkII 12" woofer yesterday and was thinking of sending it to you for a new voice coil if possible. I loved that sub.
No worry about the interior mold who will be dislodged by the vitrations and mixed with the ambiant air by the speaker movement... Why not sand the interior or at least clean it while the side is opened!
The cost of such a restoration clearly exceeds the cost of a new subwoofer. It was easier and cheaper to buy a new one. Besides, even the best restoration will not return the factory characteristics. Therefore, if the device is so badly damaged, the right way out is to buy a new one.
Excelente trabalho. Adorei o barulho da chuva. Há restauradores e construtores que usam fundo musical em seus vídeos nos tirando o prazer da interação, do compartilhamento, da imersão quase total na atividade executada pelo profissional.
Great work. But as many restaurations, i ask to myself : why not buying a New one or a second hand ? Parts, products, time cost much money. Pleasure to do, of course.
Sometimes with vintage gear like this, new ones are just not available, and used ones can be prohibitively expensive because of their unique sound. In that case, the restoration absolutely makes financial sense. I myself once had a bass amp speaker reconed so as not to lose the unique sound of the amp.
Awwah man, this was great! I am extremely impressed with the amount of work and effort that went into this restoration. You do excellent work. Superb job!
Bonjour, déjà bravo pour la restauration. Mais j'ai une question, est-ce la même qualité que du JBL d'origine ? Car là vous avez utiliser quoi comme matériaux ? Du bas de gamme ? Car JBL est quand même une marque reconnue et faite pour durer, cette restauration aura t elle la même qualité ? En tout cas très bon boulot, dommage que l'on ne sache pas quel produit vous utilisez et ce que vous faites détail par détail.
I appreciate all of the great camera angles that you used so we could really see all the intricate work that you did on this amazing piece. Stunning repair work - so intricate and well-thought out.
O
This was my first job after University in Viet Nam. Toluene is quite toxic and I had to use it to soften glue all day and inhale it. This video brings back a lot of memories 👍👍
It works great though. Almost any kind of adhesive is no match.
Toluene? And you went to university? You know that’s not just runny nose toxic but highly cancerous, right?
Честно скажу, очень здорово когда такие как вы даёте вторую а может и третью жизнь вещам, на которые многие люди уже не возлагают никаких надежд, за ролик большое спасибо.
exactly you are right sir❤👌⚙️👍🏻
@@electricsolution6330Сэр Алекс Фергюсон 😂😂😂😂
это лишено смысла. это изначально дешманский и посредственный был саб. если изначально на заводе в эту голову и вкладывались хоть какието технологии, то как видим подвес, центрирующая и сам диффузор уже просто от фиг знает чего. в итоге у вас голова стала самой конченой, с толстенным подвесом и бумажным диффузором никакущей жосткости - самый смак для саба =)
Что он дал?
В нутри не почистил,контакты от динамика не перепаял,прилепил старые ржавые😂
😂ебать починили бочка
Ini sangat menarik buat belajar untuk memperbaiki.....barang yang sudah Rusak...keren
Super 🎉
Great job, the only thing that worries me is that mould all over the box that stayed.
It lets the sub play down to 15Hz.
@@o0Donuts0o As a 90s car audio enthusiast, I approve this statement lol hahaha.
He sanded it off
Lastima la prueba de sonido 😢
Got covered with a blanket
Bravissimo, veramente un ottimo lavoro 👏👋❤️
PERFEITO ! só o Sound ficou a desejar. Mas talvez esse não era o objetivo. Mas creio que 100%❤👏🏻👏🏻👏🏻👏🏻
Was erwartest du? Er baut die chancis ( lautsprecher) völlig falsch zusammen. Die können nicht gut gelingen. Mir würde so was nicht ins Wohnzimmer kommen. Nicht mal in den Party Keller
What liquid are you using to remove the adhesive from the driver?
Мне тоже интерестно! Вы узнали или еще нет ?
100% Acetone works best for Disolving adhesive.
Thineer!
Pure acetone (Acetona pura)
gasoline working also well
that sub had seen some life. nice restoration
In throw away world, thisnis refreshing to see. Most ppl these days do not have the skills or patientce to do anything like this so they say " easier to buy a new one". This guy does great work. May not be financially cheapet to rebuild but is alot better than new
😂😂😂"rebuild better than new"😂😂😂😂. You for real,cuz?
@@kamaumike6873 its not that its "better" its that he has the skills to do what he does. Im sure ypu couldnt do what he did, i can and do as much as possible. Throw away society now days. Ive been installing car stereo for the last 28 years , trust me when i say there are alot of amps and subwoofers that are older that are much better than brand new ones. Kids are raised to just throw stuff away now, no one even cares to try and fix anything, its kind of a lost art. I remember when there were shops to repair tvs and stereos, now they get tossed and a new one bought. The throw away generation has created shitty build products thay are designed to last a short time and be thrown away. Its a bad cycle, make trash, throw in trash, buy new trash. Fills our landfills
I wish I had his skills for electronics I rebuild machanical stuff and tools saves allot of money
@@erik120719 I fixed an old work clock I found in a bin once. Took me 2 hours haha. Rust on the "motor" contacts. All those quartz clocks use a resonant crystal stepped down through a digital counter to a "motor" that flips 180 degrees of rotation every second. This is then reduced through a 30:1 reduction to run the second hand, a further 60:1 to run the minute hand, and a further 12:1 to run the hour hand.
I have just rebuilt 4 x 7” speakers for my home AV system
Never seen speakers repaired and refurbished before, pretty cool. Subbed.
அருமையான வேலைபாடு தாங்கள் மிகவும் திறமையானவர்
Really love the whole process you did on this. I restore subwoofers too and this was great!
I have a question... What do use to remove old glue from repro ?
With Butanone
🥰 WUAO 😍 EXCELENTE, TRABAJO, FELICIDADES 👍
I would also like to know the same thing
it's a joke no???
That was incredible, you don't get to see stuff like this very often.
Przepięknie jest to odrestaurowane ta stara kolumna pozdrawiam serdecznie 👍👍👍👍
Super importante ,reciclar nem tudo é lixo ,sua dedicação de Mestre pelo . Parabéns pelo trabalho brilhante
I really enjoy watching this.
Rất ngưởn mộ .. ông bạn thật là chăm chỉ đã chủa lành lại chiếc loa
Great job. However, it would be very useful for your viewers if you could let us know what you are doing (some narration or sub-titles), what chemicals you use, etc.,
No English.
ASMR, no speaking
Ok - no speaking - what do you speculate is the solvent he is using to loosen the glue? Isopropyl alcohol? Acentone?
Projects 😊😊@@fractology23
This is an asmr channel
Крутая перделка))))
Great Job on the restoration
Excellent 👌 work on the box though. The paint work is wicked bruh!
Good job, What spray paint you were using on the box after painting it.
Das nennt man dann wohl nachhaltig. Prima❤
Mantab, luar biasa, terampil, dan sangat cerdas.
Dari barang rongsok, menjadi indah, bermanfaat kembali.
Matur nuwun bro💪
Increíble 😮una reparación exelente creo ya son profesionales en esta aria pues impecable una calidad perfecta
I'm speechless seeing this attention to details work you've done. It's very professional, love it. I'm watching from Nigeria, please where in the world are uploading this video? Will like to get in touch with you ❤❤❤❤🎉
*Great ! Awesome !!! Congrats my friend !!!!!* 🙋🏻♂️👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Incrivel. Parabéns, nota 10.
Clean installation.Very well professionally done.Enjoyed video
Excellent restoration 👍
Anyone in the business seeing potential of something others dont is priceless. Hopefully you can pass this on to others who will be your successors. The gift stays intact because you create a legacy
Bhiya txc ese interesting vdio keliye dilse spport❤❤🎉
Looks very nice. You did a fantastic job at restoring that subwoofer.
Nice music played at the end. 🎉
:the artist might be "carpenter"
😅
This man has great skills
very good work, i have a question for you, what's the liquid you use to remove the adhesive??
Any reply on these?
Try acetone
I here look restoration of power full..subwofer.good
Love what you do. But please do narrate to us step by step what you are doing, what tools and chemicals you are using so that we learn also..
Excellent skills and job !!
Excelente trabajo 👍
This is calming
I wish I had a magical junkyard to pull stuff out like these guys do🤷♂️
And a magical liquid that repairs circuits by washing them.
@@IlBiggo그것은 락카시너 일겁니다
@@이바름-u3e yeah, I hear lacquer thinner is perfect for restoring copper tracks XD
Done skillfully watching from Kenya
Браво мастеру. Реставрация с востоновление просто улёт. Спасибо за видео. 🎉🎉🎉
Wow amazing.appreciation..incredible relife those deteriorate things..luv it ..
У Вас золотые руки
Beautiful job and very skilled great video keep up the great work 👍 😊
nice work man. good to see you are bringing these written off items back to life. DO you have a shop where you sell these?
Ddung
😮
Felicidades! Muy buen trabajo, ya solo el hecho de reparar el cajón es genial
Excellent work! I love seeing your videos of saving electronics, so satisfying! I just blew my JBL W12GTi- MkII 12" woofer yesterday and was thinking of sending it to you for a new voice coil if possible. I loved that sub.
If you live in the States, many large cities have repair services.Or try simply speakers.
It's not hard to replace a coil u can most likely do it yourself..
@TheBeast-thj9qo have you ever did it ?
so interesting it almost hypnotizes me. cheers
Can you list all the liquids you used? Thanks
🔥🔥🔥
glue, and glue remover.
I think this is amazing work. I don't take it for granted the skill and patience needed to do this kind of work. Great job.
Класс!!!👍
helal olsun on numara oldu
No worry about the interior mold who will be dislodged by the vitrations and mixed with the ambiant air by the speaker movement... Why not sand the interior or at least clean it while the side is opened!
Doesn't matter, YT views check out.
Nice video. Where did you find the PCB board you replaced.
Was thinking the same thing
I have a feeling that the inside is dirty asf...I wish he clean it
тонкая работа! молодец
Well these restorations you guys do are the most awesome things I have ever seen. Excellent work.
Amazing, I miss the days of subs and mps in cars. Great resto job 👍
You sir are an artist an a master!!!!Great, beautiful job!!
I love restoration, may you be restored too anytime you wear out.
Just ask the Cybermen... :)
සුපිරි බන් සින්හලෙන් මම කමෙන්ට් දාල අමුතුම ආතල් එකක් ගන්නවා ❤😂😂
The cost of such a restoration clearly exceeds the cost of a new subwoofer. It was easier and cheaper to buy a new one. Besides, even the best restoration will not return the factory characteristics. Therefore, if the device is so badly damaged, the right way out is to buy a new one.
It's probably cheaper for him to repair it, hence he is doing it. Or maybe he owns the repair and restoration shop.
I wouldn't dismiss the fact that this got 1.8m views..
The views is what matters
Or it's special to someone and they want it
You’d be surprised how cheap the parts are at wholesale.
Very nice 👍🙂 god job 💯💯 watching from Kenya 🇰🇪🇰🇪
Excelente trabalho. Adorei o barulho da chuva. Há restauradores e construtores que usam fundo musical em seus vídeos nos tirando o prazer da interação, do compartilhamento, da imersão quase total na atividade executada pelo profissional.
No início estava achando chato... Mas gostei assisiti até o final
Parabéns pelo serviço 👏🏻 👏🏻 👏🏻 👏🏻
Fine restoration 👍✌️ greetings from Ukraine 👋🇺🇦
You are a genious,,,, better i bet than the original from factory :) well done
Great work.
But as many restaurations, i ask to myself : why not buying a New one or a second hand ?
Parts, products, time cost much money.
Pleasure to do, of course.
Sometimes with vintage gear like this, new ones are just not available, and used ones can be prohibitively expensive because of their unique sound. In that case, the restoration absolutely makes financial sense. I myself once had a bass amp speaker reconed so as not to lose the unique sound of the amp.
What is the solvent
from India, perfect work ....
Which Type of glue do you use for the foam edges etc ?
Excelente restauración
А в конце видео включил стук отбойных молотков вместо музыки)) капец😂 просто молодец
Man, alot of work! Nice job!
...Super Man... From ThaiLand 26 October 2023
Wow I am so speechless that for what you doin is amazing…. Awesome, Great video… (subscribed). 😊
Este pata es.tecnivo y carpintero tiene todo su maquina
Well done in restoration the subwoofer. I just wonder how it sounded like compare to the orginal one. It's more important than the look!!
Big Like 🖐️👏👍👍
Good luck...🙋
A RUclips restoration video that isn't fake? A rare thig these days. Lovely job fellas!
100% real video,
😊😂😢😊😊😊😊😢😢😢🎉🎉🎉😂😂 1:04 1b.
😊😊,
P
Ты наверное первый мистер Чау которого я похвалил,достойная работа,молодец!
Awwah man, this was great! I am extremely impressed with the amount of work and effort that went into this restoration. You do excellent work.
Superb job!
Wish all RUclips videos were like this. Great work. And NO TALKING! Like sub click the bell all that bs.
Good work brother!!!
Please what type or name of the liquid you used in the removal
Thinners
Existe um tipo de tynner para remover colas, inclusive PU de parabrisa.
Probably acetone
Bon boulot 😮
Parabéns pelo ótimo trabalho
Great job guys, it goes to show what can be achieved with the skills you have.
What is the paint???
Black color))
Thank you very very good...
Все хорошо. Работа профессионала. Удивило, а почему внутри колонки не убрал мусор и паутину ? 😅
С панчами на пару пакистанских киловатт всё вылетит само
O Melhor
What chemical is being used to eat the glue? I like how it just wipes right off
Если узнаете подскажите пожалуйста?
Probably lacquer thinner, or break cleaner.
IPA - Isopropyl alcohol
@@atulchanda9713 I'll be putting that to the test on some Optimus Speakers
Love your videos, great job. Regards from Australia.
Bonjour, déjà bravo pour la restauration. Mais j'ai une question, est-ce la même qualité que du JBL d'origine ? Car là vous avez utiliser quoi comme matériaux ? Du bas de gamme ? Car JBL est quand même une marque reconnue et faite pour durer, cette restauration aura t elle la même qualité ? En tout cas très bon boulot, dommage que l'on ne sache pas quel produit vous utilisez et ce que vous faites détail par détail.
unbelievable work bro❤⚡👌⚙️👌👍🏻👍🏻
Where did you get all the speaker parts?
...no, no, no, no... otra cosa, Hermoso Trabajo amigo, Hermoso Trabajo mis FELICITACIONES ENORMES!!! GRACIAS, BENDICIONES.
And that's why I don't buy anything like this off of eBay...
You use Craigslist huh. Lol
@@DIANOMICS hah!! Good one.