Its educational for people to watch and learn construction techniques. Sometimes the biggest hurdle is the first attempt, people fear to make mistakes. If somebody is making a loudspeaker for the first time and they don't work 100% , rip em apart and tinker with the design. The finale cosmetic covering will hide the attempts and versions...
I believe you would need a crossover for the speaker to only drive the lower frequencies for it to actually be a dedicated subwoofer. Even then you still need a woofer (speaker) that is rated down to 20hz or at least down to 50hz for it to be classed as a subwoofer.
I wonder what the theory is? Why do you need such a long duct? After all, we all know how the tube distorts any sound. If the emphasis is on amplifying low frequencies due to resonance in the pipe, then I would like to see a method for calculating the diameter of the pipe, its length and the number of elbows, which are highly undesirable in acoustics. Otherwise, there will be no amplification compared to a conventional phase inverter, but we will only get a distorted, colored sound that is very far from the sound engineer's idea.
Similarly, I was wondering if you calculated the overall length of the ducts, to make sure that their output is perfectly in phase with the output of the woofer.
I think after a certain amount of tube the gains are diminished. We use to build subwoofer boxes,use different diameter and length of pipe to tune the boxes.
A few things come to mind. 1. The Xmax of that speaker is likely not sufficient to handle the wavelength desired by such a port. 2. There will be all sorts of unusual resonant frequencies heard with this un-reinforced construction method: tubes, ports, cabinet. 3. The enclosure and the desired port tuning frequency do not appear to be well matched. 4. The port length and diameter do not appear to be well matched. 4. There are bound to be phase issues, here.
I remember putting my cassette player (I know, I'm old) into an empty dresser and opening the drawers. this was in 1970 something and the sound was amazing.
I still have a cassette deck. But your idea of the doors is not new. I have a Kriesler stereogram from 1968 with sliding doors at ends over the speakers. So it looks just like a nice cabinet when not in use.
You are not old.... I had an 8 track in my first car. 😉 I still use an 8 track in my workshop. I have an old stereo from early 70s that way I don't have to worry about theft or damage. Many years ago my father would pick up 8 track tapes for me at yard sales for ~$0.10.
I guess the theory is the PVC Tubes funnel the Bass, but the length distance the air travels causes a delay better Bass. In the 80's instead of baffles or tubes, I used two or four woofers in a car in 1982. Never made a box square but they had a few angles if not rounded backs so the bass does not just bounce against a flat area never sounded as good. Woofers that required a large box to perform correctly, I reverse the polarity some how worked great.
@@Alex-yr4qi чтобы звук стал воистину аудиокакафильский, нужно к унитазу огромный рупор как у патефона присобачить, а в унитаз впиндюрить ширик 150 ГДШ. Вот тогда вообще сказка а не звук будет 😝😂😂😂👍
У чела остались обрезки труб после ремонта сантехники и он решил забубенить ролик для впечатлительных. Результат достигнут, суб собран. ХайФая никто не обещал. В мире стимпанка идея прижилась бы 😎
Скинул я этот ролик спецу и однако ... : Я: -"Прокоментируй пожалуйста эту контрукцию. Ты в этом разбераешься." Он: -"Это туннельный фазоинвертор, самый высший класс акустического ящика..." Я: -"Эта конструкция может выдавать красивые басы?" Он: -"Ну типа самые глубокие".
remove the fittings pipes, &all then give 4 inch one pipe length 20 cm locate just bottom of near same woofer ( not back I mean front ), put glass wool inside box all sorround so you Will get more deep smooth bass 🙏
Did you mean, to use only ONE 4" pipe, 20cm long and on the front, lower part of the box? Does it matter the size of the box, as dimensions of this project were not given?
You are all missing the point here, ignorants! This dude deserves credits and respect, for the soul reason alone; He is a maker, a builder! He create on his own terms and skill level, that makes sense to him. This way he achieves valuable experience and knowledge about making a speaker. In the end he will know what really works in practice, in real life and not what most of you guys, think you know about theory from reading a book!
I doubt it really makes it sound better with all that piping, plus if you are going to use piping, have a clear window to show it off with 12 volt led lights connected to the speaker too and make it a show. Kind of like a gamer pc with a clear window, all that bling bling showing off to be a cool guy.
Don't Knock it too Quickly.....This is an Improved (Larger Speaker) version of the very popular & Successful Bose tuned "Sound Waveguide" tabletop Stereo radio design.....When properly Tuned, most casual Non-Audiophile listeners are Impressed & Prefer the amazing Improved Bass sounding performance of this Relatively small size stereo radio !!
Now attach the speaker to the pipe to protect the speaker fully and fill the box around the pipe with cement/concrete/epoxy resin slowly to prevent any air bubbles and to make the pipe as RIGID as possible so that it prevents vibrations that causes the pipe to rattle over a period of time
@@tonywa9343 Once placed in the right place they don't require to be moved a simple wheel board would help to find out the right place The point is purity of sound clarity not your sarcastic remarks which you are accountable for because that is your responsibility
Pulled the words right out of my mouth. Hoewever, simple sand will do. Finally, just using a long tube "waveforming" is not enough. The tube has to be tuned, if not, you get lower but smeared bass. Also, the ports need to be tapered, if not, it will also "chuff". Its easier to simply make a bass reflex enclosure, the bigger the box, the lower the bass. You can also add a passive radiator for additional extension.
the vent should be on the front... the box is huge you can put the mid and high range as well, insides of the box should have the sound absorber too you can use carpet or foam material. The effort is brilliant....
Specs and dimensions? For different sizes speakers say like 10 or 12 inches? Ty for the video. I’d probably use different adhesives in my opinion. What about the vibration after time? The PVC will generate rattling sounds correct? if the PVC isn’t properly secured or braced? Sorry for all the questions just curious on the science of it all. Very interesting. Thank you again.
Have you never heard of pvc glue? Hot melt in not going to stand up to the vibration of a subwoofer. As far as shaping the porting of the speaker, it could have been achieved with wood panels that would have strengthened the cabinet and taken less time. And where is your baffling to stop those large panels from resonating? Sorry dude, but you have a lot to learn about speaker design.
mendingan pake dekat Dari kayu aja... mungkin jangka pendek sangat bagus tapi Kalo jangka panjang suatu saat pipa Akan buat getaran Yang mengganggu.. tapi overall mantap Dan mampir ya
I am missing the insulaton troughout the box, under the rim of the speaker, the connector, around the pipe exhoust. Everywhere where it can wistle/blow. Otherwise this is a great build with much details around the woodwork :) (I also would use a bit thicker cable, i am not sure about the power of this speaker, but it doesnt cost much) I also built speakers without any calculations when I was young, but propably its worth it. Anyway the satisfaction of listening to a speaker which you built on your own makes it the best in the world :)
I use this same type of tube system for my car. But the chamber where the speaker goes is also tube. The guy here still used a box though. It’s my favorite and best for anything below 25Hz! My tube complete tube system is about 25lb compared to a conventional bulky square box that needs bracing would be 80lbs which for a daily vehicle sucks. Ever since I discovered tube systems, it’s all I use for Bass systems!
Brilliant strory telling. Much respect and admiration. First time I have viewed your instructions. Subscribed. Would donate if I could. But you get prayers either way.
Интересно сделано, но из за такой длины труб фазоинвертора и большого количества изгибов вместо хорошего баса получится искажённое бубнение. Лучше бы вы сделали тот же короб со щелевым фазоинвертором или четвертьволновым резонатором, в крайнем случае с трубой Войта
I would call it a rattling wave damper. Look at the device of the pipe of the old gramophone. 📯 Gradual diameter transition and proper swirl to gently remove other noises. The volume of the box must be in proportion to the room so as not to create resonance. And some polyurethane foam inside
Gran trabajo! sólo hubiera preferido que las salidas de aire sean hacia el frente, para que no rebote el aire expulsado si se coloca el equipo cerca de una pared quedando limitados. Felicitaciones!
Happy 2023. Good luck to us all. I did this using a 3" PVC pipe with the same 3 u-joints and 2 L-joints and I am pleased with the outcome using an 8 inch mid-bass.
That's an enthusiastic build. The extremely long ports will create excessive planar drag. Group delay will be high. Get a copy of some good software and speak with someone who understands it. If you can model port velocity, mutual coupling, group delay & other easily overlooked parameters, your results will improve dramatically.
There's a reason that deeply tuned sub boxes are big. The tuning on this is no doubt low, but at any volume, the ports will be noisy, and because of the multiple non-smooth curves, they won't be very effective... But hey, it looks cool.
Так вот почему каловая масса из рф в Украине в первую очередь унитазы срывает и домой везет. Акустику создавать стало быть. Прав был Герман Греф, ох прав
If you cut the MDF on a cnc machine, why do all the sanding and grinding? Why the last bend on the port? It only directs the opening chose to the front... Why not place the port openings on the front and not the back? Why make two ports and not just one? Did you do ANY calculations to the port and the length? I have NO suggesting as to what you should make next, but I would suggest anything else than a speaker enclosure!😝
What is that subwoofer tuned to? I ask because it looks like quite long ports for a box that big, although in a small box you end up needing a really long port just to get a low tuning with adequate port area, which is why many use passive radiators. I've made boxes for 6 x 9 speakers and with 1.1 to 1.2 cubic feet each and 2 2.5" ports I think that were about 8 inches long, the tuning came out around 50 Hz which was low enough for a bass and mid woofer like a 6 x 9. I've also accidentally tuned a big PA speaker to 11 Hz when messing around with ports I had no idea of Helmholtz frequency calculations for (which means it wasn't providing significant boost in the useable range).
@@jasonmelo1974 in this big a box, you don't need that long a port to get low, especially if it's not particularly wide. The "11 Hz" PA speaker was an H//H Pro 150. I added a piece of cardboard pallet wrap tube to the hole where the bullet tweeter was. Later I entered the paramaters in Hornresp, given the box was just over 100 litres (4 cubic feet). This enclosure will function as a large sealed box, although maybe in the single digits there might be some boost, although the displacement of this driver is likely not enough to take advantage of it. You'd get better SPL just tuning to 40 Hz. Edit: I just did the calculations for 4 cubic foot box with a 4" wide pipe 12" long and it comes to between 24 and 25 Hz in half space. Still too low though for the type of speaker I wanted, which was a party/PA speaker for maximum punch above 50 Hz. Quadrupling or maybe 5 or 6 x port area would have got me there.
The bass is equivalent to that of a semi-open box in which the front sound waves stand out. Rear waves are attenuated by the ultra long ducts (acting as a very low pass filter), so not cancelling frontal ones. This is why most of the sound energy is delivered frontally and centered around the high bass (40 - 60 Hz), close to the natural resonance frequency of the speaker. In this frequency range the box behaves close to a big closed box. The ducts aimed at very deep bass (lower than 30Hz) have no main function in this system, neither the speaker is able to deliver it. All this is a waste of time and plumbing, in my view. And lack of knowledge of minimal speaker building principles either. I will not leave a like which is of course the main aim of this misleading video.
It is far less expensive to simply buy two drivers, put them in an appropriately sized sealed box and equalize the bass response. You get a bass response that rolls off less than this design does below the port resonance and you get accurate bass with low group delay that a ported design can never have. Modern accurate hifi speaker designs don't use ports, open transmission lines or passive radiators.
Yes that is the downside with all pipes/ports. Everyone is used to that sound quality degradation when it is the norm when most of the speakers due to space constraints and the wish of having something small that should sound bigger.. If we on the other side want no compromise and with sound quality. Then skip the ported enclosure go with open baffle and big driver!
I feel like you would want to separate the tube chamber from the speaker because the vibration would be on the outside of the tube and the inside therefore canceling out resonance.
Nice job construction, but you should invest a bit more into the quality of the woofer and definitely add a Tweeter with the crossover and put more thick cables plus the finiture design outside then you good to go...
Such type of speakers were made by Sonodyne Company but instead of plastic pipes they filled the box with coir and thermocol and cotswool and the output was astounding.
Assalamualaikum, Maaf ya, tayangan nya menarik, tetapi bagi saya orang awam.. yang belum pernah membuat seperti ini, bisakah anda memperjelas dengan sedikit lebih detil, Anda menggunakan Lem apa bagusnya, dan di tembak dengan apa itu supaya lengket.. ,, ini adalah sebuah inspirasi yang sangat bagus.. untuk mereka yang ingin berkarya,, Terima kasih atas informasinya.. Sukses Selalu ya,,
Hey, I love the spirit, creativity and enthusiasm, great job, I send you greetings and respect. Acoustically speaking it's a disaster. You have creativity, obviously, but you would be missing the other 50%, which is information, I think you're on the right track, but study! Greetings.
Nhìn thấy co ống Bình Minh là biết bạn người Việt Nam. Tôi là một người thợ điện tử đã nhiều năm (60 t) nhận xét: bạn có sáng tạo, nhưng loa sẽ nghe không hay đâu vì lượng không khí bên trong loa số với ống hơi không được cân. Lưu ý là ống hơi nếu dài phải đi tù nhỏ ra lớn như saxo và phải có thể cắt ngắn hay thêm độ dài. Chúc bạn vui.
Awesome design of your enclosure!!! It would really Kick with a slightly larger Sub or at least a better quality variation of what you placed in it, something that has dual voice coils and a better magnet and basket even if it was kept the same diameter speaker wise would be a huge benefit to take advantage of your great design.
My trading strategu
www.scalpxau.pro/
Biggest success of this project is the near 10millions view.
you can buy a lot of speakers with that many views.
😂😂😂 nos engañó a todos
Its educational for people to watch and learn construction techniques.
Sometimes the biggest hurdle is the first attempt, people fear to make mistakes.
If somebody is making a loudspeaker for the first time and they don't work 100% , rip em apart and tinker with the design.
The finale cosmetic covering will hide the attempts and versions...
I believe you would need a crossover for the speaker to only drive the lower frequencies for it to actually be a dedicated subwoofer. Even then you still need a woofer (speaker) that is rated down to 20hz or at least down to 50hz for it to be classed as a subwoofer.
I wonder what the theory is? Why do you need such a long duct? After all, we all know how the tube distorts any sound. If the emphasis is on amplifying low frequencies due to resonance in the pipe, then I would like to see a method for calculating the diameter of the pipe, its length and the number of elbows, which are highly undesirable in acoustics. Otherwise, there will be no amplification compared to a conventional phase inverter, but we will only get a distorted, colored sound that is very far from the sound engineer's idea.
Yes. I do agree with you. But, you should also appreciate his creative idea.
Similarly, I was wondering if you calculated the overall length of the ducts, to make sure that their output is perfectly in phase with the output of the woofer.
Arinjudenki mindathirunnu kaanu
I think after a certain amount of tube the gains are diminished. We use to build subwoofer boxes,use different diameter and length of pipe to tune the boxes.
The size of box determined how many elbows he needed for the length of duct he wanted to produce his desired resonance...
I take it, there's no crossover, so it's a full range speaker. Very nice construction. Very soothing to watch
Thats a woofer not a midrange
obviously, it's not even a subwoofer
A few things come to mind. 1. The Xmax of that speaker is likely not sufficient to handle the wavelength desired by such a port. 2. There will be all sorts of unusual resonant frequencies heard with this un-reinforced construction method: tubes, ports, cabinet. 3. The enclosure and the desired port tuning frequency do not appear to be well matched. 4. The port length and diameter do not appear to be well matched. 4. There are bound to be phase issues, here.
My first intuitions were something similar. If you want a TL, you'll build that. :)
for best results the port should be in the face of the box and a certain length and width,
this person has good craftmanship and designs but doesnt have a clue how speakers and subwoofers work,
how do they appear unmatched? doubt he just winged it for the sake of views.
Wow you must be an expert,,, Not!!!
I remember putting my cassette player (I know, I'm old) into an empty dresser and opening the drawers. this was in 1970 something and the sound was amazing.
toi ngi la lam de cho vui thoi chu thuc te la lam ong hoi bang ong nhua nhu vay theo toi ngi la khong hay.day la y kien chu qoan cua toi thoi
I tried that as well and it did make a difference.
I still have a cassette deck.
But your idea of the doors is not new.
I have a Kriesler stereogram from 1968 with sliding doors at ends over the speakers. So it looks just like a nice cabinet when not in use.
I still have my cassette tapes and players in my house. Surprisingly, they still play. 😅😅😅
You are not old.... I had an 8 track in my first car. 😉 I still use an 8 track in my workshop. I have an old stereo from early 70s that way I don't have to worry about theft or damage. Many years ago my father would pick up 8 track tapes for me at yard sales for ~$0.10.
Didn't hear the subwoofer sound.
That's the point
What is that? 6”?
@@NickkaDUBthat's what she said
@@mridulkrishansharma5394😂😂
@@mridulkrishansharma5394 For me it’s more like she says, “What is that, 6” soft”?
Прекрасный , пластиковый звук😁😁
они тупые. как говорил Задорнов.
I guess the theory is the PVC Tubes funnel the Bass, but the length distance the air travels causes a delay better Bass. In the 80's instead of baffles or tubes, I used two or four woofers in a car in 1982. Never made a box square but they had a few angles if not rounded backs so the bass does not just bounce against a flat area never sounded as good. Woofers that required a large box to perform correctly, I reverse the polarity some how worked great.
Прикольно получилось..... теперь можно взять резиновые тапки и сыграть на этих трубах что то из Blue Man Group!)))))))))
I feel love!!!!!
Такой системы из каланизационных труб я еще не видел :)
Потому что смысла нет, только для таких видео... Задержка из-за большой длины трубы будет и возможно сопение
@@ДенисКачко-ж8о да и ящик тоже великоват. Для такого динамика хватило бы и сливного бачка (как раз в тему видео было бы)
@@adambisultanov76 думаю унитаз будет хорошим объемом для динамика, а выпуск унитаза фазоинвертор
@@ДенисКачко-ж8оthings probaly tumed to -20hz😂
BBBravoooo, bravo you are a big master, very pleazure for me to see this, tnx. and ful respectfull from old BG.
This video is a great example on how McDonald’s sells the most hamburgers of any hamburger joint, but they’re the worst hamburgers.
Чугунные трубы сделали бы звук гораздо винтажнее!!! Верьте мне!
Дарю идею!
чугунная секционная батарея !!!
А если мощный динамик вставить в унитаз, вообще сабвуфер получится😂
@@Alex-yr4qi чтобы звук стал воистину аудиокакафильский, нужно к унитазу огромный рупор как у патефона присобачить, а в унитаз впиндюрить ширик 150 ГДШ.
Вот тогда вообще сказка а не звук будет 😝😂😂😂👍
Всё это замечательно! Но вместо лабиринта нужно подключить канализационную систему всего дома!
На ютубе уже есть видео, как парень ставит динамик вместо канализационного люка 😂
У чела остались обрезки труб после ремонта сантехники и он решил забубенить ролик для впечатлительных.
Результат достигнут, суб собран. ХайФая никто не обещал. В мире стимпанка идея прижилась бы 😎
А фанэру - подобрал на свалке
Скинул я этот ролик спецу и однако ... :
Я: -"Прокоментируй пожалуйста эту контрукцию. Ты в этом разбераешься."
Он: -"Это туннельный фазоинвертор, самый высший класс акустического ящика..."
Я: -"Эта конструкция может выдавать красивые басы?"
Он: -"Ну типа самые глубокие".
@@JR-nh4kb ну то есть эта фанерная штука типа крутой фазоинвертор ?
@@keramzitJo
Это мне сказал человек, который сам ещё ~25 лет назад собирал подобное на заказ.
Very creative interesting concept worth it I doubt it.
Посвящается фетишистам лампового звука😀
A skilled plumber
remove the fittings pipes, &all then give 4 inch one pipe length 20 cm locate just bottom of near same woofer ( not back I mean front ), put glass wool inside box all sorround so you Will get more deep smooth bass 🙏
Did you mean, to use only ONE 4" pipe, 20cm long and on the front, lower part of the box? Does it matter the size of the box, as dimensions of this project were not given?
I agree. I did the same thing with my Kicker ES 12" . It really produced a deep soothing bass.
@@fiqueporaqui4" port on a 4" speaker lmao
Watching here idol sending my love and support
You are all missing the point here, ignorants!
This dude deserves credits and respect, for the soul reason alone; He is a maker, a builder! He create on his own terms and skill level, that makes sense to him. This way he achieves valuable experience and knowledge about making a speaker. In the end he will know what really works in practice, in real life and not what most of you guys, think you know about theory from reading a book!
You're the OP with an alternative account.
Thanks for sharing 👍+🔔✔️new friend🙏
Thank you very much!
Thank you for donating $
m.ruclips.net/video/2XAiuqrHkK0/видео.html
ĺk0popo
Hey. Well worth the trouble. Sounds great
Sounds great
Думал, что посмотрю ролик про аудиофила. А посмотрел ролик про плотника.
Из всего ролика мне понравилось как он аккуратно собрал корпус )))
@@АлександрФадеев-ю5т Вот-вот )
+ сантехника
I doubt it really makes it sound better with all that piping, plus if you are going to use piping, have a clear window to show it off with 12 volt led lights connected to the speaker too and make it a show. Kind of like a gamer pc with a clear window, all that bling bling showing off to be a cool guy.
Don't Knock it too Quickly.....This is an Improved (Larger Speaker) version of the very popular & Successful Bose tuned "Sound Waveguide" tabletop Stereo radio design.....When properly Tuned, most casual Non-Audiophile listeners are Impressed & Prefer the amazing Improved Bass sounding performance of this Relatively small size stereo radio !!
Its called Boom/sizzle. As everyone in the industry knows, Bose is a marketing company, not an audio company.
You are so amazing
Làm cái ống hơi cho đã đi r cuối cùng cái loa nghe còn thua cái loa ống hơi bth nửa😂
Good job bro..👍👍
Now attach the speaker to the pipe to protect the speaker fully and fill the box around the pipe with cement/concrete/epoxy resin slowly to prevent any air bubbles and to make the pipe as RIGID as possible so that it prevents vibrations that causes the pipe to rattle over a period of time
И главное - никакой музыки🤣
And then buy a engine hoist, so you move it about the room
@@tonywa9343
Once placed in the right place
they don't require to be moved
a simple wheel board
would help to find out
the right place
The point is purity of sound clarity
not your sarcastic remarks
which you are accountable for
because that is your responsibility
Pulled the words right out of my mouth. Hoewever, simple sand will do. Finally, just using a long tube "waveforming" is not enough. The tube has to be tuned, if not, you get lower but smeared bass. Also, the ports need to be tapered, if not, it will also "chuff". Its easier to simply make a bass reflex enclosure, the bigger the box, the lower the bass. You can also add a passive radiator for additional extension.
@@tonywa9343 😂😂
That Good Kreasi...I Like your kreativitas 👍
Dadi Arep Pesan seng koyok Mini Compo Ono layar sentuh e👍👍👍
the vent should be on the front... the box is huge you can put the mid and high range as well, insides of the box should have the sound absorber too you can use carpet or foam material. The effort is brilliant....
It makes no difference, bass is not directional.
@bobverney4903 it does make a difference for group delay and when you put the speaker against a wall to use room gain.
Make your own vid
Необычный фазоинвертор. Несколько странно, что он имеет выход в тыл. Фронтально, было бы много выигрышнее, думаю.
If you use a compression bit vs just up or down spiral fluted bits, you can get much cleaner cuts, in less time.
bro fix the table 😃, nice project!
Specs and dimensions? For different sizes speakers say like 10 or 12 inches? Ty for the video. I’d probably use different adhesives in my opinion. What about the vibration after time? The PVC will generate rattling sounds correct? if the PVC isn’t properly secured or braced? Sorry for all the questions just curious on the science of it all. Very interesting. Thank you again.
So nice... 🇨🇺🌹
Have you never heard of pvc glue? Hot melt in not going to stand up to the vibration of a subwoofer. As far as shaping the porting of the speaker, it could have been achieved with wood panels that would have strengthened the cabinet and taken less time. And where is your baffling to stop those large panels from resonating? Sorry dude, but you have a lot to learn about speaker design.
mendingan pake dekat Dari kayu aja...
mungkin jangka pendek sangat bagus
tapi Kalo jangka panjang suatu saat pipa Akan buat getaran Yang mengganggu..
tapi overall mantap Dan mampir ya
I am missing the insulaton troughout the box, under the rim of the speaker, the connector, around the pipe exhoust. Everywhere where it can wistle/blow. Otherwise this is a great build with much details around the woodwork :)
(I also would use a bit thicker cable, i am not sure about the power of this speaker, but it doesnt cost much)
I also built speakers without any calculations when I was young, but propably its worth it.
Anyway the satisfaction of listening to a speaker which you built on your own makes it the best in the world :)
Nothing better than to hear your own design of a speaker actually work and sound sweet.. I make car sub enclosures . Good work
I use this same type of tube system for my car. But the chamber where the speaker goes is also tube. The guy here still used a box though.
It’s my favorite and best for anything below 25Hz!
My tube complete tube system is about 25lb compared to a conventional bulky square box that needs bracing would be 80lbs which for a daily vehicle sucks. Ever since I discovered tube systems, it’s all I use for Bass systems!
It's bullshit ....
Systems has valves are stoves I use integrated amplifiers stable on two hom By car
@@zip.gianni4045
You are ignorant.
Where can I learn about this? There has to be more people doing that.
@@zip.gianni4045 what?
Without using T/S parameters everything is a guessing game. Thats why the specs are there. Gotta love the wood working CNC machine.
Also a transmission enclosure will work the same way, and no tube have to be purchased and rigorously worked.
Olá. O profissional em epígrafe deveria trabalhar com COMPENSADO, no lugar desse papelão, chamado MDF. A acústica ficaria muito mais substancial.
Brilliant strory telling. Much respect and admiration. First time I have viewed your instructions. Subscribed. Would donate if I could. But you get prayers either way.
Lol
Интересно сделано, но из за такой длины труб фазоинвертора и большого количества изгибов вместо хорошего баса получится искажённое бубнение. Лучше бы вы сделали тот же короб со щелевым фазоинвертором или четвертьволновым резонатором, в крайнем случае с трубой Войта
Turning the port around would put the throat far from the sub and place the mouth on the front,,that's a win,win
PARABENS !! eu aqui consegui sentir a QUALIDADE dos GRAVES .. muito bom imagina ai perto da Genial caixa de SOM .. PARABENS !!
As the loudspeaker is a full range one, I would have used a low and high frequency crossover in parallel to the speaker .
Thanks for job, looks excellent, but not sure about plastic pipes, idea so so
Just imagine the bass if you used an actual woofer!
Lol
Stuff a dd 506 or 606 in that bastard and watch it rattle the hot glue loose
And maybe a crossover to filter out anything over 100 hz
I would call it a rattling wave damper. Look at the device of the pipe of the old gramophone. 📯
Gradual diameter transition and proper swirl to gently remove other noises. The volume of the box must be in proportion to the room so as not to create resonance. And some polyurethane foam inside
It's the Best creation.
Gran trabajo! sólo hubiera preferido que las salidas de aire sean hacia el frente, para que no rebote el aire expulsado si se coloca el equipo cerca de una pared quedando limitados. Felicitaciones!
wow awesome sounds like a can drum
Happy 2023. Good luck to us all.
I did this using a 3" PVC pipe with the same 3 u-joints and 2 L-joints and I am pleased with the outcome using an 8 inch mid-bass.
बेहद शानदार वीडियो सिंपल और सावधानी के साथ पूरा देखने की जरूरत प्रदान किया
That's an enthusiastic build.
The extremely long ports will create excessive planar drag. Group delay will be high.
Get a copy of some good software and speak with someone who understands it. If you can model port velocity, mutual coupling, group delay & other easily overlooked parameters, your results will improve dramatically.
There's a reason that deeply tuned sub boxes are big. The tuning on this is no doubt low, but at any volume, the ports will be noisy, and because of the multiple non-smooth curves, they won't be very effective... But hey, it looks cool.
Well, nice box. As for the sound quality it's exactly as it should sound out of a sewage pipe.
А ЕСЛИ ТУДА ЗАСУНУТЬ УНИТАЗ , ЖЕЛАТЕЛЬНО ПОСЛЕ 25 ЛЕТ ИСПОЛЬЗОВАНИЯ В ОБЩЕСТВЕННОМ ТУАЛЕТЕ, ЗВУК БУДЕТ ПРОСТО ШИКАРНЫЙ. НУ ПРОСТО КОСМОС.
Они так и делают. Только нам не показывают, думают что мы им завидовать будем.
@@ZiminRZ
кто такие "они" и кто такие "мы"?
Jajajajaja... You're absolutely right ! ...
Так вот почему каловая масса из рф в Украине в первую очередь унитазы срывает и домой везет. Акустику создавать стало быть. Прав был Герман Греф, ох прав
Great sound, just one question, Why did you cut the conections?
If you cut the MDF on a cnc machine, why do all the sanding and grinding? Why the last bend on the port? It only directs the opening chose to the front... Why not place the port openings on the front and not the back? Why make two ports and not just one? Did you do ANY calculations to the port and the length?
I have NO suggesting as to what you should make next, but I would suggest anything else than a speaker enclosure!😝
I've seen this guy do some things that leave me scratching my head, always.. But it's a good way to kill time 🤣
Waste time you mean..?
he is legend in his own way🤣
Die komplette Konstruktion ist absoluter Schwachsinn! … 👎
Wow! it sounded like Blue Man Group Drumbone!
What is that subwoofer tuned to? I ask because it looks like quite long ports for a box that big, although in a small box you end up needing a really long port just to get a low tuning with adequate port area, which is why many use passive radiators. I've made boxes for 6 x 9 speakers and with 1.1 to 1.2 cubic feet each and 2 2.5" ports I think that were about 8 inches long, the tuning came out around 50 Hz which was low enough for a bass and mid woofer like a 6 x 9. I've also accidentally tuned a big PA speaker to 11 Hz when messing around with ports I had no idea of Helmholtz frequency calculations for (which means it wasn't providing significant boost in the useable range).
With a port that long I assume it's tuned to 5 Hertz 🤣🤣🤣
@@jasonmelo1974 in this big a box, you don't need that long a port to get low, especially if it's not particularly wide.
The "11 Hz" PA speaker was an H//H Pro 150. I added a piece of cardboard pallet wrap tube to the hole where the bullet tweeter was. Later I entered the paramaters in Hornresp, given the box was just over 100 litres (4 cubic feet). This enclosure will function as a large sealed box, although maybe in the single digits there might be some boost, although the displacement of this driver is likely not enough to take advantage of it. You'd get better SPL just tuning to 40 Hz.
Edit: I just did the calculations for 4 cubic foot box with a 4" wide pipe 12" long and it comes to between 24 and 25 Hz in half space. Still too low though for the type of speaker I wanted, which was a party/PA speaker for maximum punch above 50 Hz. Quadrupling or maybe 5 or 6 x port area would have got me there.
Thank you for a good video
the phase inverter output must be in front, otherwise it will dampen the bass in antiphase with the speaker
в данном чюде, это без разницы😆😂😂😆😂чисто столярно-канализационное видео...
just a waste of materials... no sense video...
The bass is equivalent to that of a semi-open box in which the front sound waves stand out. Rear waves are attenuated by the ultra long ducts (acting as a very low pass filter), so not cancelling frontal ones. This is why most of the sound energy is delivered frontally and centered around the high bass (40 - 60 Hz), close to the natural resonance frequency of the speaker. In this frequency range the box behaves close to a big closed box. The ducts aimed at very deep bass (lower than 30Hz) have no main function in this system, neither the speaker is able to deliver it. All this is a waste of time and plumbing, in my view. And lack of knowledge of minimal speaker building principles either. I will not leave a like which is of course the main aim of this misleading video.
Maybe with transparant board and color led will look nice.. good job
It is far less expensive to simply buy two drivers, put them in an appropriately sized sealed box and equalize the bass response. You get a bass response that rolls off less than this design does below the port resonance and you get accurate bass with low group delay that a ported design can never have. Modern accurate hifi speaker designs don't use ports, open transmission lines or passive radiators.
சிறப்பு தம்பி 👍 💐
Valeu irmão ficou top e já apreendi parabéns
Mantap kak... 👍luar biasa...
the downside of such a long bass pipe is that the sound out of the pipe is delayed in relation to the sound out of the bass speaker
Yes that is the downside with all pipes/ports. Everyone is used to that sound quality degradation when it is the norm when most of the speakers due to space constraints and the wish of having something small that should sound bigger..
If we on the other side want no compromise and with sound quality. Then skip the ported enclosure go with open baffle and big driver!
Kesuen luuuuurrr..... ☺️☺️☺️☺️
Que frecuencia lograste sacar con este proyecto? Hay aplicaciones que ayudan a entonar nuestros diseños
m.ruclips.net/video/sAzSEqnM6Yw/видео.html
I have always liked tube equipment 🙂
I had a set of tuned speakers. they use an o-scope , generate a tone , adjust the tube length until the tone is just right.
I like all but the hot glue never had any luck with hot glue putting anything together but overall great video
I feel like you would want to separate the tube chamber from the speaker because the vibration would be on the outside of the tube and the inside therefore canceling out resonance.
Nice job construction, but you should invest a bit more into the quality of the woofer and definitely add a Tweeter with the crossover and put more thick cables plus the finiture design outside then you good to go...
Such type of speakers were made by Sonodyne Company but instead of plastic pipes they filled the box with coir and thermocol and cotswool and the output was astounding.
suggestion for stronger, reliable, fast, and economical next time you may use a solvent cement instead of glue stick.🙂
What frequency is it tuned to?
Shroom frequency
@@nigelm.steele9329 I like it, posting from Colorado, though it has been a minute since I did some.....
Sir pls ek video damage woofer ko tik kisa karay.. Is ka bhi ek vlog shoot karay..
Создание этого ящика стоило 10млн просмотров в ютюбе!
Создай ты действительно классную акустику сюда никто бы не вошел!
Молодец мужик!
Genial parabéns vou tentar fazer um dessa amigo
not good as u people but this system according to me will not boost lf. a folded horn type will be much better option.
Assalamualaikum, Maaf ya, tayangan nya menarik, tetapi bagi saya orang awam.. yang belum pernah membuat seperti ini, bisakah anda memperjelas dengan sedikit lebih detil, Anda menggunakan Lem apa bagusnya, dan di tembak dengan apa itu supaya lengket.. ,, ini adalah sebuah inspirasi yang sangat bagus.. untuk mereka yang ingin berkarya,, Terima kasih atas informasinya.. Sukses Selalu ya,,
Wouldn't pvc glue make this project a lot easier?
Nice video, well done, thank you for sharing it with us :)
Parabéns achei muito interessante
Hey, I love the spirit, creativity and enthusiasm, great job, I send you greetings and respect. Acoustically speaking it's a disaster. You have creativity, obviously, but you would be missing the other 50%, which is information, I think you're on the right track, but study! Greetings.
Not gonna work. Sorry, it's a bad build.
It's poor quality of phone's bandwidth
You're here because you're cheap. Want better, buy better.
Very talented 😊😻😍
Good,nice brother.
Superb.💝💝💝💯💯💯👍👍👍🙏🙏🙏🙏🙏
Nhìn thấy co ống Bình Minh là biết bạn người Việt Nam. Tôi là một người thợ điện tử đã nhiều năm (60 t) nhận xét: bạn có sáng tạo, nhưng loa sẽ nghe không hay đâu vì lượng không khí bên trong loa số với ống hơi không được cân. Lưu ý là ống hơi nếu dài phải đi tù nhỏ ra lớn như saxo và phải có thể cắt ngắn hay thêm độ dài. Chúc bạn vui.
மிக அருமையான தயாரிப்பு
Awesome design of your enclosure!!! It would really Kick with a slightly larger Sub or at least a better quality variation of what you placed in it, something that has dual voice coils and a better magnet and basket even if it was kept the same diameter speaker wise would be a huge benefit to take advantage of your great design.
I like the no port at all approach best (correct if you guessed sealed;).
Cool boi❤️❤️❤️🔥
Mantap kreasinya ka, salam subscribe salam sukses selalu