@@DvellTechTips well it will work on small speakers because the parts aren't heavy enough to move the coil to a point that it will scrape to the magnet but with bigger speakers good luck lol you will need that piece no matter what they dont put the spider for nothing ya know
hey don't do that with your speakers! First, the spider keeps the voice coil centered in the magnet gap, after cutting the spider, the voice coil will strike the magnet, and the insulating layer on the coil's wire will be destroyed, which will burn it and even damage the amplifier by short-circuiting. no point doing this; good luck;)
At first,Spider sticks the coil to the speaker so it is most important part and the second is coil need to be changed as subwoofer coil has much more layer than the normal speaker.... looks like it worked but not so applicable for permanent buildup for subwoofer speaker
Hey! Whenever you see there's the curtain of the speaker is somewhat blown-like, it means that it **is a WOOFER**. What you converted it into was a subwoofer. So actually, you converted a brand woofer to a mini subwoofer.
@@samannoyb no.. It wasn't.. Its full range. Not subwoofer. Subwoofer plays only low frequency, usually ranged 20hz to 200hz. Subwoofer produce only deep bass, no treble.
I guess this would work, but I don't see a real need nor use case to do this, any woofer below like 4" will not produce significant bass, unless you push some serious power through it, but at 5w you will not get very far. but a cool idea nonetheless!
You have increased the weight by sticking the whole thing instead of the only the coil. 2ndly the depth of the cool is now reduced because the 1st one was deeper and it won't give you full effect.
Hey just letting you know that driver most the time those can take base but the voice calls very small and that that passive radiator is metal I tried the same thing because I had a passive radiator that is the same shape as with my old TV speaker so I put it on there and then the voice goes too small but it's a very powerful voice call and it just crumbled the cone so my idea is to look for a very very shallow speaker with a very tall voice coil because that will help the passive radiator get the direct sound instead of the cone in there flexing I've had it happen and I try to look for a way bigger speaker or look for one that has a large voice coil so if you have any old speakers that are you know disposable check the voice coil size it has a decent size voice coil like a 1 to half an inch I think those would be decent for what you want to use but that voice called there seems like it was severely underpowered well overpowered for what it's being used for at least I had some pretty bad luck when I tried to do that conversion with a TV speaker because the cone crumbled very very quickly as soon as I started playing anything that involved base
Sin "Spider", es muy fácil que quede mal centrada la bobina y que toque el imán, por lo que no tendría buena calidad de.sonido, además esa tela café, es para evitar el polvo entre la bobina y el imán. Y al menos en México más barata una bocina que un radiador pasivo del mismo tamaño. Conclusión, una modificación que no tiene ningún sentido hacerla.
With all due respect but this is NOT real sub conversion. A lot more changes are needed to achieve this... I'll show it how to do this in a proper way on my channel in some time.
Sin el centrador la bobina comenzará a raspar la pared del iman y posteriormente dañarse. Además el cono original y el radiador pasivo tienen la misma suspencion no tuvo sentido hacer el cambio de cono si la suspencion es la misma.
No hagan cosas raras mejor ahorren y comprense un nini amp Aiyima A3001soporta subwoofer activos y pasivos y trae regulador se frecuencias is clean clean tiene un precio muy economico y luego un convertidor alta baja para regular el voltaje de cualquier parlante y que reciba lo necesario.
Você não converteu em subwoofer porque não tem filtro de grave ou seja também passa as alta frequência como um speakrs normal porém este cone que você usou e com uma borracha mais macia por isso dá esse efeito mas o vídeo e bom
mano, é só mais um canal de indiano fazendo qualquer coisa relacionado à auto falante pra gerar view, é obvio q esse cara n tem a minima ideia doq ele ta fazendo
@@the_real_space kkkkkk concordo com você porque não faz o menor sentido isso que ele está fazendo e falando, se você pegar um subwoofer desses de homecinema ou de carro e meter pra funcionar em qualquer amplificador sem filtro neum você vai notar que sim passa frequência alta pro sub pass os médios e os agudos e o grave porém no subwoofer isso fica mais basso como se tivesse uma esponja absorvendo essas frequências pois um subwoofer é projectado para trabalhar com frequência baixa o (sub grave) e não com frequência média e alta por isso não faz sentido agora se você colocar um Woofer esse sim vai reproduzir todas as frequências por ser Woofer e full range o que ele fez no vídeo foi tornar um Woofer (mais macio possiblitando na hora do grave, graves mais macios e aveludados ) não o transformou em subwoofer pois até a bobine de um sub é diferente a de um Woofer.
you could have just glue the new diagrams over the old one and left original voice coil and cone there as will be behind the new flat one,way less work
I LOVE THIS IDEAS YOU ARE SO SMART IN YOUR HEAD
gajab maan gye bhayya ji apko very very very nice 👌👌👌
Without spider it wont work.Rattling sound will come
I did it and it works no noise just bass
@@DvellTechTips well it will work on small speakers because the parts aren't heavy enough to move the coil to a point that it will scrape to the magnet but with bigger speakers good luck lol you will need that piece no matter what they dont put the spider for nothing ya know
@@anxiety1209 it small part doesnt need spider like many companies did to tweeter
Yeap rip voice coil 😂
Voice coil life will be so short 😂
Its working 😍😍. No trable only basssssssss😍
Love from BANGLADESH 🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩❤️🧡💛💚💙
Звуковая катушка !!! Магнитная система!!! , а не подвес!!!
hey don't do that with your speakers! First, the spider keeps the voice coil centered in the magnet gap, after cutting the spider, the voice coil will strike the magnet, and the insulating layer on the coil's wire will be destroyed, which will burn it and even damage the amplifier by short-circuiting. no point doing this; good luck;)
That is what I thought this guy has no idea what he is doing.
@@jimthvac100 i think he know ;p but cost is too hight to make it to your speaker xD
@@jimthvac100he knows what he is doing he know that will be harmful for amplifier
At first,Spider sticks the coil to the speaker so it is most important part and the second is coil need to be changed as subwoofer coil has much more layer than the normal speaker.... looks like it worked but not so applicable for permanent buildup for subwoofer speaker
Nice!
Looking forward to making something a little BIGGER!!!
Don't you say?...
You can stick a passive radiator diaphram on the speaker cone and its will give working like this. And we don't need to wast a speaker
Hey! Whenever you see there's the curtain of the speaker is somewhat blown-like, it means that it **is a WOOFER**. What you converted it into was a subwoofer. So actually, you converted a brand woofer to a mini subwoofer.
Thats a wrong explanation of woofer.by just changing the cone, doesnt make a sepaker into subwoofer. Its still just a full range speaker,
But it was a subwoofer! And he literally destroyed it !
@@samannoyb no.. It wasn't.. Its full range. Not subwoofer. Subwoofer plays only low frequency, usually ranged 20hz to 200hz. Subwoofer produce only deep bass, no treble.
Same coil lol. Anyway adding additional coil winding won't fit inside the magnet gap 👊
Ty for the content hope you get famous🎉❤
Oh man that's a thrash😂
Good video, but I wonder if the coil is not off-center when it comes to replacing the diaphragm.
I guess this would work, but I don't see a real need nor use case to do this, any woofer below like 4" will not produce significant bass, unless you push some serious power through it, but at 5w you will not get very far. but a cool idea nonetheless!
You have increased the weight by sticking the whole thing instead of the only the coil. 2ndly the depth of the cool is now reduced because the 1st one was deeper and it won't give you full effect.
Good job..bro👍👍
This is just wrong in all ways🤦♂️
Hey just letting you know that driver most the time those can take base but the voice calls very small and that that passive radiator is metal I tried the same thing because I had a passive radiator that is the same shape as with my old TV speaker so I put it on there and then the voice goes too small but it's a very powerful voice call and it just crumbled the cone so my idea is to look for a very very shallow speaker with a very tall voice coil because that will help the passive radiator get the direct sound instead of the cone in there flexing I've had it happen and I try to look for a way bigger speaker or look for one that has a large voice coil so if you have any old speakers that are you know disposable check the voice coil size it has a decent size voice coil like a 1 to half an inch I think those would be decent for what you want to use but that voice called there seems like it was severely underpowered well overpowered for what it's being used for at least I had some pretty bad luck when I tried to do that conversion with a TV speaker because the cone crumbled very very quickly as soon as I started playing anything that involved base
Super Bro👍👍👍👍👍👌👌
Sin araña ó spider? Y la bobina ó coil como quedó centrada?
Sin "Spider", es muy fácil que quede mal centrada la bobina y que toque el imán, por lo que no tendría buena calidad de.sonido, además esa tela café, es para evitar el polvo entre la bobina y el imán. Y al menos en México más barata una bocina que un radiador pasivo del mismo tamaño. Conclusión, una modificación que no tiene ningún sentido hacerla.
Look wise best👌
Super👍
Thankas bhae
സൂപ്പർ 👍👍👍👌👌
Looks better
With all due respect but this is NOT real sub conversion.
A lot more changes are needed to achieve this...
I'll show it how to do this in a proper way on my channel in some time.
No offense but this is stupid and the furthest thing from a subwoofer
Sin el centrador la bobina comenzará a raspar la pared del iman y posteriormente dañarse. Además el cono original y el radiador pasivo tienen la misma suspencion no tuvo sentido hacer el cambio de cono si la suspencion es la misma.
rendben jól van 😆ez így nem a leg jobb megoldás 🙈( yes I am Hungarian)
[this is not the best solution]🙈
you converted a passive radiator into woofer that's not how it works lol
Yeh woofer hae ya tweeter.Sound se to Aisa hi lag raha hae.
Can you do it for 6" speaker??
Hell no it the coil will scrape on the magnet
@@anxiety1209 lol ya
No hagan cosas raras mejor ahorren y comprense un nini amp Aiyima A3001soporta subwoofer activos y pasivos y trae regulador se frecuencias is clean clean tiene un precio muy economico y luego un convertidor alta baja para regular el voltaje de cualquier parlante y que reciba lo necesario.
the spider is the most important part
Yes its very important
Not the most but very important yes
You forgot about the spider 😂😂😂😂😂😂
Can we do this same to boat stone 1000 ?
Are questions mark lagaya hai answer karo yrr, like kya krra hai 🤦🏻♂️
Spider is very important role speakar in up and down motion without not good work
This is called Chutiyapaaa...
Tanks 👌👌👌
Polichu 💞💞
Malayali 🔥
Kadk🤘👍👍👍👌😀
Supar 👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌👌👌👌
That’s a sub not woofer 👍
?
Haha without spider subwoofer this subwoofer sound like a twitter
Speaker ki har video main sab yahi gaana kyun bajate hai 😀😂
Iska spider to jodo ye kaisa speaker hua?
Super👌🏻👌🏻
Good 👍
Super
👍👍
Most important part is with is want to make speaker one thing is not their the speaker will not work am I right 🤔
Você não converteu em subwoofer porque não tem filtro de grave ou seja também passa as alta frequência como um speakrs normal porém este cone que você usou e com uma borracha mais macia por isso dá esse efeito mas o vídeo e bom
mano, é só mais um canal de indiano fazendo qualquer coisa relacionado à auto falante pra gerar view, é obvio q esse cara n tem a minima ideia doq ele ta fazendo
@@the_real_space kkkkkk concordo com você porque não faz o menor sentido isso que ele está fazendo e falando, se você pegar um subwoofer desses de homecinema ou de carro e meter pra funcionar em qualquer amplificador sem filtro neum você vai notar que sim passa frequência alta pro sub pass os médios e os agudos e o grave porém no subwoofer isso fica mais basso como se tivesse uma esponja absorvendo essas frequências pois um subwoofer é projectado para trabalhar com frequência baixa o (sub grave) e não com frequência média e alta por isso não faz sentido agora se você colocar um Woofer esse sim vai reproduzir todas as frequências por ser Woofer e full range o que ele fez no vídeo foi tornar um Woofer (mais macio possiblitando na hora do grave, graves mais macios e aveludados ) não o transformou em subwoofer pois até a bobine de um sub é diferente a de um Woofer.
Looks like a passive radiator
🤔
you could have just glue the new diagrams over the old one and left original voice coil and cone there as will be behind the new flat one,way less work
Where i get this round bass radiator?
Shoulda just installed the PR in the same box as the speaker..
I lost my 5watt working speaker to make this trash now that speaker is in the storeroom
You changed the Fucking DUST C A P
Top
Paper cone kaha mila
i dont think you understand what a subwoofer is
,👍👍👍✌️
It isnt even a subwoofer , a 2 inch driver cant be called a subwoofer
Why didn’t he use a heat gun
Sahi speaker kharab kar diya
super stupidy....no need to open all until voice coil...just cut out that tube
💕
OMG😱😱😱
❤
It's can used but dust will damaged coil
😄😄😄😄😄😄😄😄😄
🤯🤯🤯🤯🤯
Is amplifer kit ka link doge
This amplifier kit no
JBL tg 113 bluetooth speaker ka matherbored
Lol it's "Diaphrgam " not "Dayafram"
No clear sound
Bass was mad it started storming around the moment it turned on
No spider not very good you ruined a good speaker to make a frankenwoofer that wouldnt sound half as good as the original
why is there to much treble
Whats name music
NCS songs
Ok
Bro but where is spider
Y la suspensión de la bobina dónde queda
Gv
how about the spider you forgot it
♥♥♥
Kabaad ho gaya speaker.
Time waste video!
Thanks
@@myelectronicideas it's all my pleasure 😂
Sound quality become bad
🤣🤣🤣
thats not a subwoofer thats crap
Fake spider to lgya ni hi is ne
Fake
Lol
Hahahaha
And a sudwoofer dose not make sound only bass
I'm not using filterbord
Kuch bhi 😠