Genius design on the bracket to capture that handle. Also, I appreciate the attention to safety. It only takes a second for something to happen that can be life altering. One of my giant concerns around my farm is kids being somewhere I'm not expecting them. I can't tell you how many times I've gotten out and checked or stopped and asked another adult if they have eyes on my kiddo and her friends.
Thank you Autumn for showing the tilt-capability of this trailer. That was more informational than the rest of the video combined! You should just start conducting the whole video yourself. Wow that is one awesome trailer. I added it to my buy list!!
Nice trailer it would be handy for all kinds of things around the place. I really think the manufacturer should consider putting your safety latch on there . Great idea.
I have been looking at similar trailers. They Have high speed hubs on the wheels so you could mount trailers tires and pull it behind your vehicle. Lights could be installed on the sides of the trailer body and if you keep the weight under 3000 lbs it would be road legal to use around town no brakes needed. Just a thought.
What a cool addition to any operation! Also love the latch safety mechanism u made. You are becoming my 2nd favorite channel to follow . Yeh I admit Home Town Acres is #1 .
I just knew you'd improve this trailer. Very nice safety latch. The company would be crazy not to incorporate this feature into their trailer build. One observation, if you removed the front gate on the tractor and put a long log in, it looks like you'd hit the release mechanism. You might consider shortening the release mechanism's handle so that it lays below the bed of the trailer and anything you put in it, logs or lumber etc. can't accidently release the hitch (your safety device will prevent this), or bend the lever (if it was shorter it would be under the load, and difficult to operate). It appears you were able to dump your logs and they didn't interfere with the lever so the lever may be low enough and not an issue.
Jack/kickstand would be more useful if you could crank it up like an RV. With a load in the trailer, it might be impossible to lift the hitch off the ball, but with a crank stand, you could raise the hitch off the ball.
Hey Doug. Good idea on the safety mechanism. However, it seems to me like that could rotate forward towards the tow vehicle when bumping around in the woods, or on uneven ground etc. I think I would put that bracket in the closed position, and then drill another hole through the mechanism that you've built, and drill it all the way through the tongue of the trailer, then slide a pin through both the tongue, and your mechanism, with a keeper or cotter pin on it. Just like the one that the jackstand on the trailer has. Then it CAN'T move anywhere until you want it to.
Very cool little trailer! I was thinking when you had the 10'8" logs in there would have been a nice height to cut 20 rounds right off the back of the trailer! Video doing well Doug!
You should put on a winche to raise and lover the bed on the trailer. That would be much more secure. Yes it takes a bit longer time to open and close it. But you can also use it to haul the logs on to the trailer with.
I would consider adding an actual lockout function to the dump-handle guard. The trailer is likely to be an attractive nuisance to undersupervised visiting kids. When you try to idiot-proof something sooner or later a better idiot comes along. 🤷🏻♂️
I think a dump angle limiting chain or strap would work great when dumping the logs. That safety cover is a good idea. Keep from giving yourself a prostate check with the handle if you did accidentally bump it. 😮
Doug, nice simple safety solution. Would it be possible to make the safety longer so it acts as a debris cover and safety latch. As dirt and materials land on the greasier sections, the debris cover would assist in deflecting it away from the latch mechanism where the grease attracts the dirt. Just a thought.
As usual, you’ve managed to make a good thing better. Honestly, I think the company has little choice now other than to develop their own safety latch as it is clearly an unsafe condition. Should someone now get injured sans such a safety latch, they would probably have some good grounds for a negligence lawsuit. Don’t get me wrong, I’m not a litigious kind of guy but it’s clearly an unsafe design without a safety pin, latch or device. I think the company should also affix a warning label at the lever. Other than that, it seems like an awesome cart.
I would assume (and I know what that could mean), the tool holder underneath the trailer on what we here would call the "passenger" side would actually be the driver's side in Finland.
I wonder if you could replace the 6 bolts that hold the rear gate and gas strut brackets with a quick release type bolt, or maybe a clevis pin. I'd want something that's fairly flush on both sides. If you can find a clevis pin the right length (or make one), it might not protrude any further than the nut on the existing bolt does. When the gate is up the gas shock should be fully extended (or nearly so), which would make it easy to get on and off.
DOUG, nice! Explanation on the equipment, it was really informative especially with the performance aspect. The editing and production of your video was done well. I'm sure you'll have a lot of comments about the safety lock you fabricated, which is a great idea! I just don't know WHAT your 'nickname' should be! 1.Freddie Fabricator? 2. Tommy Tinkerer? 3. Dougie Dewright ? Don't matter, you always got 'A BETTER WAY' !! Good Shhtuff!
@@OneEyeCustoms I have a PTO mounted chipper from WoodMaxx with a directional out feed. I’m thinking about adding a hitch point somehow to move a trailer like that around.
Doug what are the specs on those gas struts under the trailer? Those things look stout! I've got a couple uses for something that strong, I'm just wondering what the rating is on them.
I believe I was told they are about 250# push rating. 500+ for the both of them. The only reason you can push them down is the big cantilever that the dump bed creates. I have no idea where you could get them from… there are no numbers on them anywhere.
Can you tell me what type of gas struts that are being used as I have a gas powered wheelbarrow I could to help with tipping out stone and garden spoils, thank you for all your time and tips
Love your work! By the way, the road you just built from those chips is going to break down in a year or so and will turn to sloppy soil, perfect for the garden, but not as a drive. Been there, did that, replaced it with stone. Just saying...
Would it be easy to take the tail gate off for hauling logs it looked like the logs put pressure on the top portion while sliding under. A complete open front and back would lessen your chance of bending the rear gate.. thank you Tom from Nebraska
Curious, @ ruclips.net/video/YUMsD7keW8M/видео.html The woman can't pull it down. My daughters weight about 100 lbs each, will they be able to pull the bed down when it is empty? I'll be sure to add the latch. thank you
‼️ What a great video ‼️
❤️ love Scotland ❤️
Genius design on the bracket to capture that handle. Also, I appreciate the attention to safety. It only takes a second for something to happen that can be life altering. One of my giant concerns around my farm is kids being somewhere I'm not expecting them. I can't tell you how many times I've gotten out and checked or stopped and asked another adult if they have eyes on my kiddo and her friends.
Great video Doug thank you.
Great safety idea Doug !
Love the hauler, and your safety lock out.
really like that latch you added. Always, like your videos and looking forward to the next one
Great video Doug. You & Autumn really put it to work. The safety latch is a home run. See you in the next installment.
Thanks Jim! And thanks for watching and commenting on all the videos. It helps the channel and I love the input!
Good review and upgrade 👍👍
Thank you Autumn for showing the tilt-capability of this trailer. That was more informational than the rest of the video combined! You should just start conducting the whole video yourself. Wow that is one awesome trailer. I added it to my buy list!!
Product developers should seek you out! Your improvements and or recommendations are awesome (always).
Very nice!
Nice trailer it would be handy for all kinds of things around the place. I really think the manufacturer should consider putting your safety latch on there . Great idea.
Thank you
I have been looking at similar trailers. They Have high speed hubs on the wheels so you could mount trailers tires and pull it behind your vehicle. Lights could be installed on the sides of the trailer body and if you keep the weight under 3000 lbs it would be road legal to use around town no brakes needed. Just a thought.
Great safety shield for the release handle!….👍….nicely thought out and executed. Doug, the editing/camera work/music of your vids….👍👍
Thank you kindly!!
Love your work. Can’t help but feel their chosen hitch is on borrowed time…or maybe I mean the stand. The swivel part design looks great
PROhO Doug!
Great camera angles, thx.
Nice safety feature, great trailer
Doug for a moment there I thought 💭 Adam your next door neighbor had a wig on driving the side by side but it was your better half ❤😅😊👍great video
What a cool addition to any operation! Also love the latch safety mechanism u made.
You are becoming my 2nd favorite channel to follow . Yeh I admit Home Town Acres is #1 .
I hope to change that for you. Shooting to be #1 lol
Nice!
Someone makes a trailer hitch that rotates just like that.
It takes a loop type thing rather than a ball. Made for offroad trail driving.
Waiting to see the comparison of the two traiilers. Hope to see more Autumn in the future, as she brightens up the show. 🤠
I agree, but I need help from everyone in the comments to encourage her to be in more videos.
super trailer doug
Thats a sweet trailer for sure I have been looking for something to use behind my atv a little smaller though
They do make a smaller model.
Check out metsamachine.com
Electric actuators for the tailgate and dump operated independent from each other would be a cool upgrade.
I just knew you'd improve this trailer. Very nice safety latch. The company would be crazy not to incorporate this feature into their trailer build. One observation, if you removed the front gate on the tractor and put a long log in, it looks like you'd hit the release mechanism. You might consider shortening the release mechanism's handle so that it lays below the bed of the trailer and anything you put in it, logs or lumber etc. can't accidently release the hitch (your safety device will prevent this), or bend the lever (if it was shorter it would be under the load, and difficult to operate). It appears you were able to dump your logs and they didn't interfere with the lever so the lever may be low enough and not an issue.
The lever is just below the load deck, but I did shorten it a bit more to keep it from getting bumped or bent.
@@OneEyeCustoms Figured you would, when you see something that can be improved you jump right on it ... nicely done!!
Jack/kickstand would be more useful if you could crank it up like an RV. With a load in the trailer, it might be impossible to lift the hitch off the ball, but with a crank stand, you could raise the hitch off the ball.
Stay tuned for my upgrades video!😜
Might need a longer slide out handle for the wife to be able to set the trailer back down after dumping. Looks like it works a treat otherwise.
I really dig this trailer and might buy one. I don't suppose you would sell the bracket you fabbed up, I would love one of those.
No I don’t sell them, sorry.
Hey Doug. Good idea on the safety mechanism. However, it seems to me like that could rotate forward towards the tow vehicle when bumping around in the woods, or on uneven ground etc. I think I would put that bracket in the closed position, and then drill another hole through the mechanism that you've built, and drill it all the way through the tongue of the trailer, then slide a pin through both the tongue, and your mechanism, with a keeper or cotter pin on it. Just like the one that the jackstand on the trailer has. Then it CAN'T move anywhere until you want it to.
Very cool little trailer! I was thinking when you had the 10'8" logs in there would have been a nice height to cut 20 rounds right off the back of the trailer! Video doing well Doug!
Now that is something to think about!🧐
Damn I need for my 65ac lot 👍
Very similar to the moose wagon ATV trailers we built over 30 years ago in AK.
You should put on a winche to raise and lover the bed on the trailer. That would be much more secure. Yes it takes a bit longer time to open and close it. But you can also use it to haul the logs on to the trailer with.
It looks like it has a bedliner.
I would consider adding an actual lockout function to the dump-handle guard. The trailer is likely to be an attractive nuisance to undersupervised visiting kids. When you try to idiot-proof something sooner or later a better idiot comes along. 🤷🏻♂️
Very true!!!
Heavy duty build with one of those cheap pressed metal hitches,
I think a dump angle limiting chain or strap would work great when dumping the logs.
That safety cover is a good idea. Keep from giving yourself a prostate check with the handle if you did accidentally bump it. 😮
I 💯 agree with you on that one, already had my 50 year check up. I don’t need another one anytime soon.
Doug, nice simple safety solution. Would it be possible to make the safety longer so it acts as a debris cover and safety latch. As dirt and materials land on the greasier sections, the debris cover would assist in deflecting it away from the latch mechanism where the grease attracts the dirt. Just a thought.
Great idea, I will look at that!
Impressive trailer, but what's more impressive is a mini excavator without sloppy pins and bushings!
What a great trailer. Way to show off the biceps…. I can lift this with one hand.
Lol, It is even old dude capable!
@@OneEyeCustoms DOUG!.. you ain't old! Your brain and biceps are still workin!
As usual, you’ve managed to make a good thing better. Honestly, I think the company has little choice now other than to develop their own safety latch as it is clearly an unsafe condition. Should someone now get injured sans such a safety latch, they would probably have some good grounds for a negligence lawsuit. Don’t get me wrong, I’m not a litigious kind of guy but it’s clearly an unsafe design without a safety pin, latch or device. I think the company should also affix a warning label at the lever. Other than that, it seems like an awesome cart.
I would assume (and I know what that could mean), the tool holder underneath the trailer on what we here would call the "passenger" side would actually be the driver's side in Finland.
Excellent point. I never gave that a thought!!
How about an end-panel stow position?
I wonder if you could replace the 6 bolts that hold the rear gate and gas strut brackets with a quick release type bolt, or maybe a clevis pin. I'd want something that's fairly flush on both sides. If you can find a clevis pin the right length (or make one), it might not protrude any further than the nut on the existing bolt does. When the gate is up the gas shock should be fully extended (or nearly so), which would make it easy to get on and off.
Stay tuned for the next trailer video, that is one of the upgrades I did. Great minds!!!
Thanks for watching and great comment!
👍👍👍
DOUG, nice! Explanation on the equipment, it was really informative especially with the performance aspect. The editing and production of your video was done well. I'm sure you'll have a lot of comments about the safety lock you fabricated, which is a great idea! I just don't know WHAT your 'nickname' should be!
1.Freddie Fabricator?
2. Tommy Tinkerer?
3. Dougie Dewright ?
Don't matter, you always
got 'A BETTER WAY' !!
Good Shhtuff!
Thank you John!!
How do I know I can’t afford this trailer? I don’t have a mini-ex to load it with for starters…
Love to see how that catches chips from a wood chipper.
I think I would put extended sides on it to blow chips into it. But it all depends on how you had them blowing into it
@@OneEyeCustoms I have a PTO mounted chipper from WoodMaxx with a directional out feed. I’m thinking about adding a hitch point somehow to move a trailer like that around.
That’s a great trailer! Are you sure they didn’t send a 3rd for another Northwest PA RUclips channel?
I’ll look. Lol
Doug what are the specs on those gas struts under the trailer? Those things look stout! I've got a couple uses for something that strong, I'm just wondering what the rating is on them.
I believe I was told they are about 250# push rating. 500+ for the both of them.
The only reason you can push them down is the big cantilever that the dump bed creates. I have no idea where you could get them from… there are no numbers on them anywhere.
Can you tell me what type of gas struts that are being used as I have a gas powered wheelbarrow I could to help with tipping out stone and garden spoils, thank you for all your time and tips
You would have to get a hold of Bob at Metsa Machines to see if he could find out where you could get some.
metsamachines.com
Love your work! By the way, the road you just built from those chips is going to break down in a year or so and will turn to sloppy soil, perfect for the garden, but not as a drive. Been there, did that, replaced it with stone. Just saying...
I plan to replace it at that time also. Thanks for the tip and also watching
Lots of nice features but that it appears to be a robust build is the biggest draw.
Would it be easy to take the tail gate off for hauling logs it looked like the logs put pressure on the top portion while sliding under. A complete open front and back would lessen your chance of bending the rear gate.. thank you Tom from Nebraska
Stay tuned for the next video on the dump trailer. You will see what I did to make it better.
@@OneEyeCustoms thank you for your response I watch all your vidioes so I will check it out Tom from Nebraska
the back gate should come off,RK has the same with a hydraulic dumo. are there any other similar? i need it for a 7000lb tractor
I guess it all depends on the size you want.
This trailer I got is perfect for my needs.
Nie job on bracket.. Did you call them and tell them about that device?
The video was sent to them! I hope they approve of the latch!!
👀
What’s the difference between your and Adams?
I will be doing a comparison video here soon.
I'd absolutely USE THE HECK out of one of those trailers. I'd promote it on my channel as well! Hint-hint! 🙂
I’ll tell Bob.😁
Can your safety gizmo move as you drive bouncing all over the place?
Only if I run into a tree.
How are you liking the general?
Really enjoy it. Ya know what I like the most….. the stereo in it. Lol fun to cruz with the tunes on.
@@OneEyeCustoms I’m planning on picking one up. Told the wife it’s to help work around the house but we all know why we buy these toys
Curious, @ ruclips.net/video/YUMsD7keW8M/видео.html The woman can't pull it down. My daughters weight about 100 lbs each, will they be able to pull the bed down when it is empty? I'll be sure to add the latch. thank you
I’m not sure if they will be able to. You could put lighter duty struts on it or get the lighter duty trailer.