iPad 6th Gen Screen Replacement.
HTML-код
- Опубликовано: 31 июл 2024
- This video is to help show you how to replace a damaged digitizer screen on the Apple Ipad 6th Generation.
#apple #ipad6thgeneration #screenreplacement #cracked #repair #how #ipad #fast
FixItwireless assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. FixItwireless recommends safe practices when working with power tools, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of FixItwireless, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video or the lack of experience is the sole responsibility of the user and not Fixitwireless. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
Very useful video. Had this playing while fixing the iPad and just paused it every so often to work on the fixing. As others have said, it’s a great length without the need for going into too much detail. Thanks!
That’s really nice to hear thank you , I tried cutting the fat. Extremely glad you choose my video to Guide you. I appreciate your wonderful comment. Cheers mate!
This was super easy to follow. My only issues were user issues. I misjudged my depth on the sides when prying so there’s a scratch on my lcd. I touched the lcd at the top on accident. After getting everything reconnected, I forgot to make sure the home button ribbon was flush so the bottom corner wouldn’t close all the way. I redid the steps and had to restart the iPad. It’s working perfectly now
Great video! Got me through my replacement, thank you!
Hey. I replaced my iPad screen, with the help from your video. Thank you! Very helpful!!
That’s awesome Dude, keep up the great work Mike
Awesome Video! Best How Too video that I’ve ever encountered, thank you for sharing.
Thats awesome to hear, i am really glad you enjoyed it Miss.Williams
Right to the point and perfect explanation. A+
U make it look easy took me close 2 hours yur video help big time so thanks
Thank you! I chose you because your video was shorter. I had zero issues & I’m a 50 year old woman. I did get special glue that I use with my gel nail light.
That's so nice to hear, im glad to hear you got your ipad repaired successfully. Keep up the great work!
@@fixitwireless. sorry to bother but what digitiser did you use? I’d really like to know.
@@fixitwireless.Where did you get the screen from? thank you!
@@cristinaandrada5074 A company called Mobile Sentrix.
AWESOME
Super informative, thank you.
Extremely helpful and seems to be comprehensive in all that a person would need to know to do this themselves. Thanks
That’s an extremely nice comment, I’m really glad you found value in my video. Thanks Don, I appreciate it.
@@fixitwireless. No, credit where credit's due. It is not the most exciting topic, but you provided me the information I was looking for and I have ordered a phone repair kit and will order the IPAD screen too so many thanks
Li love your videos ther so awesome
thank you!!!
Thanks for the great Video, just i would like to know, with what have you cleaned the LCD.
thx dude that was helpful
Where did you get your digitizer? Are any of the ones on amazon a reputable choice?
Im gonna get my iPad fixed this Saturday seeing this makes it clear to me what will the repairer do to my iPad, thanks.
Glad that gives you an idea of what's going to happen.
Great video
Bro was struggling with words haha bit great work lad
Great video! Thanks for sharing. Wanted to mention that in my experience alcohol works much better than Goo Gone and doesn't leave an oily residue like the Goo Gone does :)
Hey Bush, I used to use alcohol, but It doesn’t absorb the glue like goo gon. I gotta stick with that.
Thank you!
Welcome! Brother cheers
hello nice video, did after replacing the glass touch did you get any notification in settning that there is an non official screen in ? like in iphones or not ? thanks
Thank you
For sure, You're welcome
Where can I get a screen replacement kit in germany
Hey there!
After replacing the panel on my ipad 6th and connected everyhting back for a quick test I’m just able to see just a little section of the screen (and not the whole thing).
Is there something I’m missing? :-( please help!
I’m currently on holiday with nothing to use to heat things with so I’ll have to find something to use
Is there a certain brand of new screen you recommend? I They have some on Amazon for around $20 that come with tools as well as replacement screen, will that work?
I was 95% done, already glueing up a new glass and... it didn't fit well. That rectangular metal thing near the button didn't sit in the right place and I started removing glass carefully to check what's wrong. But it got cured pretty well already and... cracked. I'm extremely angry. Ordering a new glass now.
To be clear, I'm not blaming you. Your video is great. Just wanted to share my pain.
Great video man
Thanks for that amazing feedback, I appertacte that so much!
Great video, thanks for info and tutorial!
Glad you enjoyed Michael! I appreciate it
U actually helped alot, i just cracked my ipad and this helps me. My grandfather has a friend who does this, not to far away and i know that my ipad is gonna be ok, and i know that nothing is gonna be messed with and im gonna be happy, lucky im not in trouble. 😅 Thank u so much!
I’m sure it’s in good hands. So glad to help!
Man i was scared to do this but it came out 7/10 good lol, made a mistake and cut the ribbon cable that makes the home button click and since the ipad has frame damage the screen doesnt "fit" all the way but a otterbox case works .. thank you
Use AssistiveTouch as your virtual home button. 7/10 is a passing grade. Good job dude, glad you got it done!
@@fixitwireless. that works but the screen i ordered came with a preinstalled home button
THX So Much! My brother dropped my ipad on hard pebble and it. Has a crack and SOMEHW A HOLE BROKE INTO THE SYSTEMS! This worked so much thx!
Love to hear it!
Had the a technician replace the screen on this model but now it won’t charge and has discharged completely since the repair over the past few days. What would cause this? I researched a little bit and on Reddit it said there may be a little switch near the battery that may have gotten flipped? Any other reason? Please help. Thank you!
There’s a little screw that holds down the battery, unscrew and lift the board so it makes disconnect and wait a sec and rescrew, that 80% works for the kinda problem you’re describing
After watching your video I replaced my sons screen and followed your video step by step but noticed when I put it all back together the number 1 didn’t work when putting in password so took it apart and check all connections and tried again and now number 1 works but number 4 is hit and miss any advice what am doing wrong thanks
Hi! I watched your video and followed the steps, was going great till I put the new screen on and tested the iPad, the ipad was going wild, apps were opening then closing on their own, I must have done something wrong, can you offer any advice please. 😊
Super late response.. just disconnect and reconnect the screen happens all the time
Does this fix if it wont respond to touch?
I need help! I did everything you said hooked everything back up to do the test and I had a blue and red line on the right side. Disconnected everything and tried again and now it won’t even do that.
There might be a problem with the display screen
please, could you help me? where could i buy a high quality lcd+touch for ipad A2602? And that delivered to Brazil.
Mobile Sentrix.
Where do i buy a replacement screen ?
How do you put the home button connector back because mine doesn’t have a latch
If the Latch broke id use tape
Hi I am from India,
I really like your video, could you please tell me from where i should bough screen and all the required tools for this process.
Thanks
I’m glad you enjoyed the video from India, Mobile Sentrix sells good parts
Hey do you know if the apple service center repair them or they won't? If yeah then what would be the approximate cost?
They do service them, I don't know the cost.
im trying to replace the screen on my ipad 6 but the power button wont work even long pressing it the volume buttons work but the power button wont help
Use alcohol to clean the Power button, or disconnect the power by unscrew the screw on the board pressing it down to the battery
What’s the stuff u use to remove the sticky thing
Its Goo Gone.
Sir can you make tutorial how to replace charger port of ipad i want to replace the screen ang charger port
Hi Ryan, thanks for the idea, ill have to try to make a full breakdown at some point.
Why won’t the home button work after I replace the screen and put the original home button back on nothing seems torn or broken on the button assembly
Sometime the bracket isn't on properly so it wont respond. Check 5:10 in the video for review.
just the right length. I, as well, clicked on this because it was the shortest.
Just trying to keep it simple, thank you.
At 7:17 what "cables" were you speaking of that you said to cut because you don't need them anymore???
At 2:22 I cut the old digitizer cables to get the screen out the way while I work on get the lcd removed.
My finger print scanner works but my home button doesn’t work. It clicks, I checked and inspected and don’t see any damage.
The home button its self is going out champ.
If the penny is covering the the camera to protect from heat, I would be careful with a penny. It looks like a Zn penny, (post 1982) but an earlier Cu might be a problem, Cu is very good conductor of heat. Zn still does conduct, so still be careful.
My home button goes so far in like something is missing to hold it in place what should I do ?
The back bracket isn't set properly. Must open and aline the home bottom please look at 5:10 in the video
i followed the video to a tee but the screen is still black. did i just connect something wrong or is there a bigger problem 😭??
Please disconnect the battery connection and reconnect it and it should turn on
Do you think it will affect the apple pencil if I replace a digitiser?
The apple pencil should work fine.
I ended up peeling off tape the other way and slicing the ribbon cables for the new glass 😅 new screen ordered. Folks.. please watch the full video
Nice job!
Thank you! Cheers!
Part of my lcd is stuck on old screen and when I connect the cable it is white screen can you suggest?
Hi, I don’t understand the 1st part unfortunately... Discount and reconnect the lcd if it’s still white look for damage on the lcd.
I smashed mine yesterday and now I had it fixed today couple of hours ago
Always a bummer to damage your iPad, get a cover and screen protector to help future damage
Anyone have any issues with the screen only 2/3 working? Like the very top part by the camera works for like a quarter of an inch, then about 3 in of nothing, then the bottom works? Any idea how to fix this?
Are those issues before or after the repair?
I did the repair and went well. Tested great and home button clicked properly. Then I removed adhesive, home button it came slightly loose and I reattached. I retested home and now no click and doesn’t seem like it’s sitting all the way through. I keep trying to lightly adjust it and retest but no dice even though the dots align. Any other tips?
Great job on getting it done. Can you please look at the back of the ipad home button theres a black dote and make sure it lines up with the silver dot on. Review at 5:10 in the video
@@fixitwireless. hey thanks so much for responding. Yeah I checked and lined it up many times. It would click if I held it there and pressed against it. But when I put everything in place the home button seems to sink inwards and I loose that. I even secured the plate over the home button with double-stick and glue like you showed. I don’t know if there was a small lip around the actual button that I lost when replacing glass or something that would help secure it or or why it slips inward.
I’m here to help :). Please visit my channel I have another video that’s doing the same repair on ipad 8 iPad. I spend more time explaining the ring around the home button. Check out 1:28 and 4:44. Check if your iPad screen had that ring or you’d have to have it from the other screen. If you can’t find it, what I do is replicate it on the screen with thin double side tap you see me using. Let me know how it goes !
@@fixitwireless. Hey thanks so much for this info, so helpful. I may have missed that ring. I did use double-stick in those areas but I guess it wasn't sufficient. I found out my husband had device coverage on our ATT plan so I just sent it in and they ended up fixing it (the screen I used had spotty responsiveness too) so this saved some time and money - fixing not only the button but giving me a fresh screen. But yeah otherwise I would have done this and I'm sure it would have fixed the issue. Anyway thanks again, very good & helpful info!
Question, is the touch screen part of the screen you are replacing or is it some other part?
The glass and the Touch screen function are fused together to make a digitizer.
@@fixitwireless. ok good, thank you, my touch screen wasn’t working in some areas. 👍🏻
Can you recommend a replacement kit?
Hope you found a Kit, I recommend checking out Mobile Sentrix for parts there good quality
Hey how can I contact u to fix my iPad
Great video. Why do you remove the battery screw first? Is that actually needed?
YES. my isn't working. That is the only part of this instruction that I didn't follow. DO THAT.
It apparently crashes the hard drive if you don't.
Nevermind! So sorry! I plugged it in and now it's fine! Thanks for the video!
@@wendytermeer8969 Still don’t understand why the battery thing, but I guess is to avoid touching sensitive (powered) parts. I also managed to get my iPad repaired thanks to the video.
Awesome!! Great job on the repair Wendy!
The links on your video takes me to a 7th gen screen and not a 6th gen. Are they the same or different?
Thanks for letting me know, I apologize for the confusion. The iPad 7/8/9 are the same. Not the 6th gen.
Why don’t you put your contacts in to descrIption. You will have more clients. Btw how much would it be to fix my iPad 6 gen screen?
Repair iPad 6th gen screen $120 I know shop. Thank yuh for the tip, ill look into that description tonight.
Nice video - very useful but the out of focus moment at 3:53 for the home button removal was detrimental. Too important a step ...
What’s the name of the glue you’re using?
in the transcript it says B7000
Thank you!
Can we change iPad 5 th gen glass to iPad 6th gen
iPad 5th gen and Air 1 use the same screen, But the 5th and 6th gen iPads do not use the same screen.
Can you fix mine? The glass on my screen has been cracked for like 3 years
We’ll be doing mail in serves soon.
Hi sir. How to tell if iPad screen has changed or not?
Hello, if the screen comes off easily that’s a good sign it’s been replaced.
Can you help me?
I bought 2 used ipads, and one screen looks more yellow , and the other one is blacker. what is the difference between the original apple screen and the one that is replaced?
.
Please help 🙏🏻
Maybe one of them is on night mode? You can turn that off in settings otherwise idk
@@k.k.slider8042 problem solved. Its a fake ipad screen . OEM actually
Hey where yuh able to resolve it?
How much do you charge for this?
What type of glue it is to make the screen stick
B-7000 or T-7000
Yes, B-7000.
Testing and it didn’t start back up.
How you know which on is broken either LCD or touch screen glass ?
What is the best price of each ?
If the lcd was broken there could most likely be weird colors or lines on the screen. If there are just cracks on the outer part of the screen then its the screen glass.
Thank you Jacob!
@@jacobduvall1813thanks a lot
How do you practice? Bro.
I work at a shop, they come in all the time. :)
Brother how much does it cost
Including your working cost .
Bcoz my ipad screen breaked like this only its of 6th gen . Pls reply
Sorry for the late reply, ipad 6 screen repairs at our shop cost $119
Would the Pencil still work?
I believe it should still work yes
it helps if you put sticky tape over the broken glass to help contain it a lil lol great video but
Ill try that tip next time. Thank you for the positive comment , glad you enjoyed
Where could I get my iPad repaired? 😰
A lot of cell phone repair shops fix iPads too
How mutch to fix a iPad 6generation?
Would you like to ship your ipad to the shop?
@@fixitwireless. it would depend on the price because I can have it fix for free because u
I know a guy”friend” he fixes screens and he say he could fix it but I don’t visit him mutch
I want to ship my iPad to the shop just hmu so I know more information
Bro doesn’t Apple Pencil work after glass replacement?
It should work just fine.
You tell us to remove the battery cover screw but not to prize the battery away. I only spotted that you had done this later in the video. I wonder how many people blew their iPads because of this ?
I had my ipad repaired from a shop and still touch is not working wished you had repaired it
Already wasted 70 $😢
How much would it cost? 😰
Shops can charge anywhere from $120-$170
I don't have heater, use what
Use a hot air blow dryer, I picked a good one up from the goodwill for $2
@@fixitwireless. thanks
Just got mine in the mail today. ruclips.net/user/postUgkxhcEDB3r-OJ3_X5hQzr7k1ZofTQy1ao_U The corners of the box was a little smashed but I think that’s more of the shipping’s fault. iPad was in perfect condition though. I ordered the yellow one thinking it was going to be a bright vibrant color. Instead I looks like more of a Gold color. I personally prefer the gold look. Definitely not disappointed but just a heads up to the ones expecting a brighter cream of yellow.
No I too scared
You can make it happen !
full surgical mode,think ill just buy a couple more…
It does feel like surgery at time specially when it’s on a time crunch!
Why did they put a penny on the iPad?
To protect it from the heat gun
I ducked up
PLEASE ANSWER 😰😰😰
Any other question?
My iPad was so glued. I destroyed it 🤦🏽
At least you trying, clean off the glass and keep it for parts.
Video is not clear does not allow for clear instruction on the home button removal an reinstall the most important part also quickly goes over the digitizer removal and install don't use this video
Hey, check out my other iPad repair video, it’s the same repair and it’ll give you more info on the home button. ruclips.net/video/Ti-Ek_xZRwA/видео.html
Bro is not even wearing gloves?!?!?!?!
I have experience handling the ipad so i don't cut my self or touch the lcd which still happens sometimes.
@@fixitwireless. Ah
@@fixitwireless. is it bad to touch the lcd