How to Repair or Replace an iPad 6 Cracked Screen Digitizer A1893 or A1954
HTML-код
- Опубликовано: 30 янв 2021
- **Want to learn how to repair?**
Click Here: training.mrphonedoctor.com/
Hey, what's up guys! In this video, I show you How to Repair or Replace an iPad 6 Cracked Screen Digitizer. This repair will work on iPad 6 Cracked Screen for series A1893 or A1954. Hope you enjoy my video and see you guys at the next one! Cheers
**Need parts tools or equipment? Visit our online store**
training.mrphonedoctor.com/shop/
Remember always mind the flex!
🔔 Subscribe for more repair videos & giveaways: ruclips.net/user/mrphonedoctor...
✅ Out our other repair videos
Apple - ruclips.net/user/playlist?list...
Samsung - ruclips.net/user/playlist?list...
Questions or need a phone repaired?
CONTACT US BELOW:
Free Repair Estimate?
mrphonedoctor.com/repair-rates/
Fill out this form and we will send you a prepaid label within 24hrs.
mrphonedoctor.com/mail-in/
Contact Us:
mrphonedoctor.com/
repairs@mrphonedoctor.com
575-639-3406
Follow Us:
/ mrphonedoctor
/ mrphonedoctor
/ mrphonedoctor
Snapchat - @MrPhoneDoctor
TikTok - @MrPhoneDoctor
SAY HI ON SOCIAL:
--Master Surgeon--
Javier V. Guzman Jr.
/ wopito
/ wopito
/ technoking 
Наука
I used my 3D printer to heat my iPad. I set the heated bed to 70 degrees and heated for 10 minutes with a thin silicone pad between the iPad and printer bed. Worked like a charm!
That’s a really good idea I have 6 3d printers myself. I was thinking of using my tshirt press but that likely would get too hot. The printer bed is actually the perfect temps. You don’t need much heat I’ve heard just like 120 degrees f is enough I’ve been told.
i have a heatpad. i slowly worked between 40 degrees and finally raised to 50 degrees to soften the screen adhesive. i put the heatpad on again to 50 degrees when i work on screen side. basically heated the rear side continuously until the whole glass removed. it took ages. i scared to damage the screen with 70 defrees heat. that's why.
lol this man is unintentionally hilarious. “But I know how to handle these I’ve done quite a few of em *sniff*”. He said this multiple times to remind us 😂
I enjoyed your video as a reference/guide for this model's dieassembly. I was specifically looking for where the flex cables are that I will need to avoid while slicing off the digitizer on this exact iPad model that I have not yet worked with. I have repaired maybe 200 iPads but have been out of the repair business for roughly 4 years. So this device is newish to me. They are all a little different and for all I know the flex cables could have moved. Remember the changes from the iPhone 6s plus to the 7 plus? How about the iPhone 4s to the 5? I do. Don't bother listening to any naysayers. Your video is golden. I am repairing this device as a favor for my boss and his wife. I do not want to set them back financially or waste their time. You have helped me on my repair mission.
Further kudos:
- Thank you for including the model number in the video name. This made you easy to find.
- Thank you for leaving the digitizer issues that you experienced during repair in the video and for emphasizing the importance of testing before sealing the device. I've made this mistake a couple of times and appreciate the reminder not to make it again. Nothing can slow down a repair like starting all over because of a failure to verify a part before allowing the glue to dry.
- Thank you for mentioning the use of dragging the assistive touch feature button as a test method. This seems easier than rotating a keyboard to all 4 screen orientations.
The only Improvement that I would suggest is being sure to note a maximum temperature or a preferred temperature to heat the ipad to so that your viewers don't burn their LCDs.
Well done all around. Excellent demonstration of process, great video quality and great sound clairity. I hope your team appreciates you. We do.
Just lemme get out my thermometer 🤓
The music! Just gimmie the tune thats playing😂 i have been replaying this vid while replacing the digi just cuz im vibing with it
😂
Thanks again, my IPAD is working great because of your help. Thank you thank you thank you! I have it in a heavy duty protective case and will never take it out again.
Glad I could help!
I was freaking out about all the finger prints he was leaving on the underside of the digitizer but watched all the way threw and then saw he had a film protection under there lol damn I was triggered by that the whole video tho
what temperature is safe to work with on heating the iPad?
Thanks! I appreciate you.
Thank you for the support!
So nice l love
what type of clamp is that... by the way its so helpful... more power..
Where is the link to the shop where you get the iPad digitizers? I don’t see it anywhere?
Con esa forma de tratar los conectores normal que no te funcione el tactil....de seguro te pasara otra vez.
Hi where did you get the digitiser from?
Hi, i got a swollen battery that wont charge ect BUT also the touch is playing up. Can bad battery ever effect touch? or do i have a bad M/b too? I could jump power to the connector and try with nominal voltage but every time other ipad i have worked on when touch stops or is trouble, m/b chips ect are too blame. Ask what you think?
What happens if you use the home button from the new screen? Any way to rescan your thumb?
Hi u recently did review on forward OCA machine have u tried repairing edge phone with that OCA machine how was the result any suggestion For OCA Machine?
It worked great. All machines we have worked on are great it's a lot about technique than anything
I don't see a link to the introgadgets screen that you mentioned.
What temperature is safe to loosen the adhesive, yet not damage the iPad? I have replaced a few samsung phone screens using a heat gun, but heated only the edges.
I've destroyed many S3 and S4 screens with a heat gun. In my experience if the surface temperature gets too hot to touch, then you should stop.
My ipad pro fall down and now I notice there is little gap between the screen and the outside frame .. I tried to push the screen down but that doesn’t fix the issue should I put superglue and then push the screen down .. the screen is working and the gap is like 5 mm .. I am worried that in longterm will affect the ipad especially that I see some dust there .. can you help with advice please..
No never use super glue. Google e8000 glue and use this.
Find something to clamp the screen down while glue cures.
Can E6000 be used in place of E8000?
Hi. Welcome
Thanks for coming
Ipad 6 even after replacement of touch screen still not working plz tell how to fix
I should have paid more attention to the "don't use too much alcohol " comment. Now I need to replace the LCD/digitizer and speakers.
I need My Note 8 Front LCD Replaced And Back Glass Replaced ? How Much and what is the process?
Please refer to our free repair estimate form for pricing.
mrphonedoctor.com/repair-rates
My new digitizer already has a home button attached, do I need to remove it and reinstall the original home button instead?
If you want certain features to work, yes
Zoom In when you pull some cable, I can’t see. 😒😒
How does one fix the bottom left connector if it was ripped off 🥴😭
Ouch it needs to be repaired with jumpers. Very technical... Or just replace digi
I can’t get the tabs under the pins to kill power , what do I do ?
Use a very thin sheet to press under. As long as you can get one side under ok
How much does the digitizer cost?
He said $40 to 50
Nice but we are wayting for video with your new FORWARD laminator where is problem?
Its coming we had vacuum go out I will be filming this week
I accidentally cut those two things that stick out of the digitizer together. What do I do!!!!???!!!?!!!!
Buy another
60th
Been thru 2 digitizers. Half the screen stops working..
More than likely cheap digis. I recommend sticking to premium only
@@MrPhoneDoctor How do you know where to get "premium"? iFixit etc?
Not gonna lie, fixing an ipad is a PITA 😂
Edit: why not have tabs on the side of the digitizer so it can be installed and tiny screws on the side. All this glue...
Well I fucked up the LCD
Wow. What a horrendous design.
I fucked this repair up so bad😭 iPhones are so much easier than this one
Woow , a video in how to replace a digitizer on a ipad on 2021..Lol
People still need some assistance. Smh
You know every year the iPad design changes
@@ianblank watching April 17, 2022. Much obliged!
Watching this in July 2023. Some of us don’t just throw money at Apple.